ITEM 1. BUSINESS

 

USE OF FORWARD-LOOKING STATEMENTS IN THIS REPORT

 

This annual report on Form 10-K for the year ended December 31, 2018 (the “Annual Report”) contains forward-looking statements that involve substantial risks and uncertainties. All statements, other than statements of historical fact, included in this Annual Report regarding our strategy, future operations, future financial position, future revenues, projected costs, prospects and plans and objectives of management are forward-looking statements. These forward-looking statements include, but are not limited to, predictions regarding:  

 

•

our business plan;

 

•

the commercial viability of our technology and products incorporating our technology;

 

•

the effects of competitive factors on our technology and products incorporating our technology;

 

•

expenses we will incur in operating our business;

 

•

our liquidity and sufficiency of existing cash;

 

•

the success of our financing plans; and

 

•

the outcome of pending or threatened litigation.

 

You can identify these and other forward-looking statements by the use of words such as “anticipates,” “believes,” “estimates,” “expects,” “intends,” “may,” “plans,” “projects,” “will,” “would” and similar expressions, or the negative of such terms, although not all forward-looking statements contain these identifying words. Forward-looking statements also include the assumptions underlying or relating to any of the foregoing statements.

 

We have based these forward-looking statements on our current expectations and projections about future events. Although we believe that the expectations underlying our forward-looking statements are reasonable, these expectations may prove to be incorrect, and all of these statements are subject to risks and uncertainties. Therefore, you should not place undue reliance on our forward-looking statements. We have included important risks and uncertainties in the cautionary statements included in this Annual Report, particularly the section titled “Risk Factors” incorporated by reference herein. We believe these risks and uncertainties could cause actual results or events to differ materially from the forward-looking statements that we make. Should one or more of these risks and uncertainties materialize, or should underlying assumptions, projections or expectations prove incorrect, actual results, performance or financial condition may vary materially and adversely from those anticipated, estimated or expected. Our forward-looking statements do not reflect the potential impact of future acquisitions, mergers, dispositions, joint ventures or investments that we may make. We do not assume any obligation to update any of the forward-looking statements contained herein, whether as a result of new information, future events or otherwise, except as required by law. In the light of these risks and uncertainties, the forward-looking events and circumstances discussed in this report may not occur, and actual results could differ materially from those anticipated or implied in the forward-looking statements. Any forward-looking statement made by us in this report is based only on information currently available to us and speaks only as of the date on which it is made.

 

 

When we refer in this report to “BioLargo,” the “company,” “our company,” “we,” “us” and “our,” we mean BioLargo, Inc., and our subsidiaries, including BioLargo Life Technologies, Inc., which holds our intellectual property; Odor-No-More, Inc., which manufactures, markets, sells and distributes our odor and volatile organic compound control products; our Canadian subsidiary BioLargo Water, Inc., which develops and markets our AOS water treatment technologies; BioLargo Engineering, Science & Technologies, LLC, a professional engineering services division; and BioLargo Development Corp., which employs and provides benefits to our employees. We also own approximately 42% of Clyra Medical Technologies, Inc. (“Clyra Medical”), an entity we formed to commercialize our technologies in the medical and dental fields.

 

The information contained in this Annual Report is as of December 31, 2018, unless expressly stated otherwise.

 

Our Business- A Sustainable Products and Technology Developer

 

BioLargo, Inc. is an innovative technology developer and environmental engineering company driven by a mission to “make life better” by delivering robust, sustainable solutions for a broad range of industries and applications, with a focus on clean water, clean air, and advanced wound care. We develop and commercialize disruptive technologies by providing the capital, support, and expertise to expedite them from “cradle” to “maturity”. Our business strategy is straightforward: we invent or acquire technologies that we believe have the potential to be disruptive in large commercial markets; we incubate and develop these technologies to advance them and promote their commercial success as we leverage our considerable scientific, engineering, and entrepreneurial talent; we then monetize these technical assets through a variety of business structures that may include licensure, joint venture, sale, spin off, or by deploying direct to market strategies. We seek to unlock the value of our portfolio of underlying technologies to both advance our purposeful mission while we create value for our stockholders.

 

Our first significant commercial success is currently unfolding in our subsidiary, Odor-No-More, Inc., which is focused on odor and volatile organic compound (“VOC”) control products sold under the brands CupriDyne Clean and Nature’s Best Science. We are gearing up for rapid growth as our products are experiencing more widespread market adoption in the waste handling industry through national purchasing agreements with four of the largest industry members. To this end, we have recently begun to offer a menu of services to our clients including engineering design, construction, and installation of misting systems and related equipment used to deliver our liquid chemistry products, as well as ongoing maintenance services for installed systems.  We have also begun expanding with early adopters into new vertical segments such as wastewater treatment, the cannabis industry and various industrial facilities like steel manufacturing and livestock processing operations.

 

Our second commercial operation, BioLargo Engineering, Science & Technologies, LLC (“BLEST”), provides professional engineering and consulting services to third party clients on a fee-for-service basis, and also serves as our in-house engineering team to advance our proprietary technologies and complement service offerings of our other business segments.

 

In addition to our two operating subsidiaries, we have technologies and products in the development pipeline progressing towards commercialization, including our water treatment system for decontamination and disinfection (our “Advanced Oxidation System”, or “AOS”) that we target to have commercially ready in 2019, and our medical products focused on healing chronic wounds, which will be ready for commercialization as soon as we pass Food and Drug Administration (“FDA”) clearance. In the fourth quarter of 2018, we purchased a stem cell therapy called the SkinDisc^TM technology which is focused on regenerative tissue management and is licensed to our subsidiary Clyra Medical Technologies, Inc. (“Clyra Medical”).

 

We believe our current success with our industrial odor and VOC control products serves to validate our overall business strategy which is focused on technology-based products and services capable of disrupting the status quo in their applicable industry market segment. We believe that the future of our medical and clean water technologies has similar and also very large market opportunities ahead as they are introduced commercially.

 

Odor-No-More Industrial Odor and VOC Solutions

 

Our CupriDyne Clean industrial products reduce and eliminate tough odors and VOC’s in various industrial settings, delivered through misting systems, sprayers, water trucks and similar water delivery systems. We believe the product is the number one performing odor-control product in the market, and offers substantial savings to our customers compared with competing products.

 

 

Market Opportunity and Disruption Validated

 

Our customer base for our odor and VOC business is expanding. We are now selling product to four of the largest solid waste handling companies in the country, and also have secured multiple flagship clients in the wastewater treatment industry, which we expect to become a priority market. We are also expanding with early adopters into new industrial markets, including steel manufacturing, paper production, construction, building and facilities management, livestock production, the cannabis industry. Opportunities for our products are available internationally. To that end, we participated in the China InnoStars Semi Finals competition in China in early November, gaining exposure for both our company and our products to stakeholders in China’s air quality and odor control market as well as potential strategic investors.  We have in the past and plan to continue marketing these products through industry associations like the “Technology Approval Group” program offered by Isle Utilities that serves the wastewater treatment industry. We also have a number of potential partners actively engaged in commercial trials around the globe and we are actively in discussion with a number of groups to leverage our commercial focus through distribution partnerships.

 

 

Many of our customers have adopted CupriDyne Clean as a replacement for a non-performing competitive products, some of which have been in use by customers for as many as 30 years. Upon using CupriDyne Clean, the majority of customers have expressed a very high degree of satisfaction with its performance compared to prior solutions. Because of this, we are realizing systematic adoption by our very large corporate customers and expect to serve these customers for years to come. Our experience has helped refine our value proposition and assemble a comprehensive menu of products and services. Our success in this market has validated the market opportunity for our products and services and encourages us to continue investing in infrastructure and sales and marketing to increase revenues. We estimate there are approximately 2,000 active landfills¹, 8,000 transfer stations², and 15,000 waste water treatment agencies³ in the United States. While all may not have ongoing odor problems or neighbor complaints, we believe many of the facilities have need for a disruptive odor solution like CupriDyne Clean.

 

The total addressable market for the waste handling and wastewater treatment industries is greater than $1.3 billion.  While we are still assessing the size of the cannabis, agriculture and steel manufacturing industries, we believe they could readily double the market opportunities for our product CupriDyne Clean.

 

Turn-key Full-service Solutions

 

At the request of our clients, we have begun offering a menu of services to landfills, transfer stations, and wastewater treatment facilities. These services include ongoing maintenance and on-site support services to assist our clients in the design and continued use of the various systems that deliver our liquid products in the field (such as misting systems). We have recently expanded these serves to engineering design, construction and installation. Our engineering team at BLEST has been instrumental in supporting these operations. During late 2018 we were awarded and completed more than 15 projects and we currently have more than 10 “design build” bids out to clients for CupriDyne Clean delivery systems.

 

 

---

¹ “Municipal Solid Waste Landfills - Economic Impact Analysis for the Proposed New Subpart to the New Source Performance Standards” (2014), by U.S. Environmental Protection Agency Office of Air and Radiation and Office of Air Quality Planning and Standards.

² The top 5 Waste Management companies in the US, as of 2011, operated 624 transfer stations, and 565 landfills. “Municipal Solid Waste Landfills - Economic Impact Analysis for the Proposed New Subpart to the New Source Performance Standards” (2014), by U.S. Environmental Protection Agency Office of Air and Radiation and Office of Air Quality Planning and Standards. This is a ratio of 1:4 (landfill to transfer stations). The estimated number of transfer stations is this ratio multiplied by the approximate 1,900 total landfills, and rounded.

³ “Failure to Act, The Economic Impact of Current Investment Trends in Water and Wastewater Treatment Infrastructure” (2011), by American Society of Civil Engineers and Economic Development Research Group. Figure includes treatment facilities owned and operated by municipalities, as well as those owned and/or operated by private entities contracting with municipalities.

 

 

Regional Adoption

 

Sales of our CupriDyne Clean products and related services were initially made at the local level, on a per-location/facility basis. We would demonstrate our product to the manager of operations at a transfer station or landfill, and he or she ultimately would decide whether to use our products. If owned by a national company, in some instances before the operations manager could buy our products, we were required to obtain official “vendor” status with the company and sign a “national purchasing agreement” (“NPA”). Doing so required a tremendous amount of effort and time. These agreements typically include the addition of our line of products which will be offered through an online purchasing portal to the members around the nation. The process of integrating the data is often delayed by months from the start date of our agreements given their very technical nature. As an example, we just completed work to finish this portion of the startup process with our fourth national agreement account. These processes establish an easy and familiar selling and purchasing process for the ongoing and long-term relationships we seek to develop. We now have NPAs with four of the largest solid waste handling companies in the United States. Some of these accounts are now introducing us to regional managers around the country who have the ability to direct the facilities in their region to use our product. Because of our continued success with our existing clients, our national accounts are expanding their support for, and expanding resources to encourage increased awareness and broad adoption of our products and services. It is also important to note that we are often replacing companies that have served these customers for 20 to 30 years giving support for our claim of ‘disruption’ to an industry.

 

We believe that “regional adoption” is a scalable approach for the larger solid waste handling companies that, with sufficient resources, we can implement nationwide. Our current national accounts represent the opportunity to serve more than 3,000 local operations around North America. Because of our success serving the transfer stations, material transfer facilities, and landfills, these very large companies are also evaluating the use of CupriDyne Clean in various transportation segments as well.

 

Emerging High-Growth Opportunity in Cannabis Industry

 

We recently established a working relationship with a company with decades of experience in air handling and air quality management for various industries, including the rapidly expanding cannabis industry. The cannabis industry is facing increased scrutiny by regulators to better control of hazardous air pollutants called terpenes that are a natural part of production and processing. These gases can also cause malodors that demand attention and can be problematic as these companies seek to maintain good community relations and avoid legal entanglements or law suits over nuisance odors. Odor abatement operating procedures are part and parcel to the permitting processes for companies involved in the industry. We have been able to successfully demonstrate that our products are effective as eliminating these VOC’s and related odors, just as we have done in the waste handling industry. As a result, we have had a number of experts in the cannabis industry tell us that our products could become part of the ‘best practices’ operating procedures for this industry and are working toward that goal.

 

The global legal cannabis market is expected to grow to  $146.4B in 2025 at an astounding 34.6% annual growth rate. Some call cannabis the 21st century’s gold rush. With an estimated 15,000 companies operating in our California alone, we believe the opportunity for our product is significant. To that end, we are organizing a series of strategic relationships within the Cannabis industry to capture the opportunity quickly. We are working to finalize agreements with equipment manufacturers, regulatory consultants, key opinion leaders, and marketing partners.  Our value proposition is unmatched for odor and VOC control and this is another great example how our platform continues to expand in high value markets. 

 

Wastewater Treatment

 

We have begun selling products and services to wastewater treatment facilities in our local markets. Our clients are prominent municipal agencies and have indicated a desire to expand the use of our products and services to additional locations in their service areas. As a result of our success in the field, a client featured our product as an example of ‘Best Practices’ for the waste water treatment industry at a national water quality conference hosted by the Water Environment Federation. We anticipate overall longer selling cycles given the technical sophistication of the customers in this market, and believe that channel partnerships with leading companies that already sell and service this highly technical market will be required for our ultimate success. We are highly encouraged and are evaluating various strategies to maximize our marketing and selling proposition into this mature and well-established market. We are actively engaged in discussions with potential distribution partners and leading engineering firms with well established relationships to the clients in order to service this very large market.

 

 

Infrastructure and Capital Needs for Odor-No-More

 

We recognize the scope of the opportunity for CupriDyne Clean and related services, and understand the task of building the personnel and infrastructure to become a disruptive company in the waste handling industry. In the United States, we currently operate out of two locations – Southern California and Tennessee. As of now, our manufacturing facilities are located in California. However, we expect to expand our manufacturing and staffing in our Tennessee operation as we achieve critical mass in that region. In the meantime, as a result of the rapid adoption we are experiencing in our local Southern California market, we are focused on adding staff and infrastructure to meet the obvious need for our products and services. Since January 1, 2018, we have added five people in both sales and support roles.

 

We believe that a significant number of personnel will be required to fully service the solid waste handling and wastewater treatment industries. We plan to expand as adequate capital to fund these needs becomes available.

 

Consumer Products – an untapped market opportunity for distribution partnerships

 

Prior to our current success in the industrial odor and VOC control markets, we invested a number of years developing our odor control products, learning the odor control business, winning a series of product design awards, refining our products, developing manufacturing techniques, as well marketing a series of consumer products. We executed licenses for these products into the pet industry and sports equipment industry. However, our licensing partners did not invest resources as promised and they did not produce meaningful financial success. The results were highly disappointing. We chose to shift our focus on the business-to-business sector and pivoted into the industrial odor control sector. Since we made the pivot, we have enjoyed meaningful success as we have secured the leading companies in the world as customers and opportunities are expanding.

 

However, the opportunity in the consumer product market is certainly not dead. Success in the industrial sector has given rise to an increased awareness and acceptance of our consumer products designs because the products are simply more effective than competing products and they are easy and safe to use. We believe that our consumer product designs will ultimately find market adoption through partnerships.   We are not focusing time and money in this consumer market sector, but from time to time, we receive inquiries from groups expressing interest for potential licensing opportunities or distribution partnerships. Recently, one such opportunity presented itself with an entrepreneurial company that offered to develop a series of marketing programs designed to build a retail base of customers in exchange for a commission on each sale.  They are actively building an online presence for our products and have recently placed our DeodorAll branded odor and stain remover for sale on Amazon.com to test market, and have begun methodically building our online presence. It is early in this process and we are optimistic that the product will find a market in the consumer markets as our partner invests time and money building the selling and marketing channel.

 

Full Service Environmental Engineering

 

In September 2017 we formed a subsidiary for the purpose of offering full service environmental engineering to third parties, and to provide engineering support services to our internal teams to accelerate the commercialization of our AOS technologies. Its website is found at www.BioLargoEngineering.com.

 

The subsidiary, BioLargo Engineering, Science & Technologies, LLC (“BLEST”), opened its office in Oak Ridge (a suburb of Knoxville Tennessee), and entered into employment agreements with seven scientists and engineers who collectively have over two hundred years of experience in diverse engineering fields. The team is led by Randall Moore, who served as Manager of Operations for Consulting and Engineering for the Knoxville office of CB&I Environmental & Infrastructure and was formerly a leader at The Shaw Group, Inc., a Fortune 500 global engineering firm. The other team members are also former employees of CB&I and Shaw. The team is highly experienced across multiple industries and they are considered experts in their respective fields, including chemical engineering, wastewater treatment (including design, operations, data gathering and data evaluation), process safety, energy efficiency, air pollution, design and control, technology evaluation, technology integration, air quality management & testing, engineering management, permitting, industrial hygiene, applied research and development, air testing, environmental permitting, HAZOP review, chemical processing, thermal design, computational fluid dynamics, mechanical engineering, mechanical design, NEPDES permitting, RCRA/TSCA compliance and permitting,  project management, storm water design & permitting, computer assisted design (CAD), bench chemistry, continuous emission monitoring system operator, data handling and evaluation and decommissioning and decontamination of radiological and chemical contaminated facilities.

 

 

Our engineering team has focused its efforts in two areas. First, servicing third party clients in similar roles as to what they did at CB&I and Shaw, and throughout their well-established careers. Second, they are working to scale-up, engineer and commercialize our AOS water treatment technologies, as well as support other technology and product development efforts within the BioLargo family of companies, including our industrial odor control solutions (CupriDyne Clean). BLEST will also pursue new inventions and be available to provide engineering support where needed for any commercial opportunities that are presented by and through any and all operating units of BioLargo.

 

Business Development at BLEST

 

The selling cycle for BLEST to new outside clients can be anywhere from a few months up to nine months or longer. The nature of their work with outside clients is highly constrained by relationships, reputation, budgeting, bidding and client timing. In light of the long selling cycle that is prevalent in this industry, we are highly encouraged by the most recent developments that have taken months to mature and now appear to be well in process to begin generating financial results. A few noteworthy examples are:

 

During the first quarter of 2018, BLEST secured a new relationship and was retained to serve as “Owner’s Engineer” for a proposed $687 million integrated biofuels production project to be built on the east coast. The proposed facility would convert hundreds of tons per day of municipal solid wastes and plastics into high-grade fuels and paraffin waxes, while diverting hundreds of thousands of tons of waste from landfills per year. Our team’s initial role in this project is to provide the project’s ownership team with consulting engineering support as the project becomes finalized. BLEST is now under contract to be paid for approximately $195,000 of engineering services rendered for the pre-project phase. We expect our role to expand once the client acquires a final piece of real property necessary for the project and additional funding. Assuming it moves ahead, we anticipate that the scope of our services will significantly expand to an important multi-year role in the project’s overall engineering management. We believe this project will require rapid and detailed response and require that we increase of our Oak Ridge staff to fully meet the demands of the project.

 

BLEST has recently secured a time and materials contract to perform a compliance review of a leading natural gas utility in Tennessee’s operating, maintenance, and emergency response activities, and to ensure the overall integrity of the facilities review relating to new rules established by the U.S. Department of Transportation Pipeline and Hazardous Materials Safety Administration (PMMSA) regulation pertaining to the use of natural underground storage of national gas. The BLEST effort will involve preparing a program implementation plan, conducting a risk assessment, and preparing operational and maintenance procedures to prevent and mitigate facility natural gas leaks and failures caused by corrosion, chemical damage, mechanical damage, or other material deficiencies in piping, tubing, casing, valves, and associated facilities. The work to date on this project has exceeded $20,000 and will continue into the third calendar quarter of 2019. This work is in addition to the annual environmental services contract that averages just over $20,000 per year.

 

BLEST has recently been notified that as a result of its recent audit work on assisting a leading healthcare products company in transitioning to the 2015 revision of the ISO 14001 standard for environmental management systems (EMS) it is being awarded another small project from the client. The new time and materials project involved preparing a detailed GAP analysis, and subsequently updating the client’s EMS procedures to reflect the significant changes to the new EMS standard which places new emphasis on upper management involvement, the life cycle of products and services, emergency preparedness and response, and sustainability. There is also a new focus on evaluating risks and opportunities and integrating this assessment into the EMS program. 

 

 

BLEST recently began a time and materials contract of work approaching $100,000 to plan and test to demonstrate that emissions from an energetic materials incinerator at a large U.S. military installation on the East coast are meeting EPA regulatory standards. An “energetic materials incinerator” allows the military to safely dispose propellants, explosives, and munitions that have aged beyond their shelf life. This facility must meet numerous emission standards including regulations that limit emissions of chemical compounds called “dioxins” and “furans”, which are tightly regulated chemicals in nearly every developed country. BLEST, having submitted the draft report for the dioxin test, has been awarded a contract for 2019 to prepare a test plan for the 2020 trial burn of the incineration system at the site. This effort combined with a contract to conduct an environmental audit and conduct training of site personnel will exceed $30,000 for calendar 2019. The anticipated contract for the 2020 test, to be awarded January/February of 2020 will exceed $300,000.

 

BLEST has now performed seven separate projects for HAVCO Wood Products, totaling over $35,000 with two additional projects scheduled for 1^st quarter 2019. We anticipate extending the current Professional Services Agreement into an overall environmental services annual contact with specific annual tasks that will convert this repeat client into a perpetual source of revenue.

 

BLEST has recently completed a time and materials contract to provide regulatory analysis of the ongoing plant expansion for a chemical company based in the port areas west of Houston, Texas.

 

BLEST has been awarded two contracts totaling more than $40,000 to provide engineering design services to a national potato processing and food product company to improve the performance of air pollution control equipment associated with potato frying in Oregon, Washington and Idaho.

 

BLEST has expanded its services offering as a direct result of a recently acquired new equipment called a custom-fabricated Rotary Thermal Apparatus (“RTA”) which expands the capabilities of the company to outside clients and creates host of new business opportunities. The RTA has proven indispensable in providing data directly applicable to the design of thermal treatment systems (i.e. incinerators, thermal desorbers, catalytic oxidation units, etc.). The RTA can also prove useful in the development of various chemical production processes and optimization of process reactions. And last but not least, the RTA can be used by BLEST to conduct treatability studies (more on that below) on contaminated solids (i.e. soils, sludges, slurries) for its clients, providing design data to engineers to develop procedures, predict outcomes and control costs for remediation projects (including soil remediation). The RTA opens up an area of practice for BLEST that includes an entire subset of remediation technologies, including thermal oxidation, thermal desorption, thermal vitrification and thermally enhanced chemical fixation. We expect the acquisition of this equipment to result in new contracts that we otherwise would not be able to execute effectively.

 

The formation of BLEST was predicated on the concept that 60% of the revenue would be provided by external clients and the remaining 40% would be provided by internal clients (i.e. BioLargo Water or Odor-No-More). By reaching this goal, BLEST will provide direct positive cash flow to the BioLargo, Inc. while fulfilling its mission to provide professional engineering services to the internal client base. For calendar 2018, the ratio was approximately 40% of revenue provided by external clients and 60% provided by internal sources. The ratio for 2018 was driven by significant need from the internal client base and circumstances related to the first full year of operation for BLEST. BLEST anticipates the original target ratios to be met or exceeded in calendar 2019. This is based on an increasing number of perpetual contracts including Citizens Gas Utility District, HAVCO, Powell Valley Utilities, and APTIM/Picatinny Arsenal. These perpetual contracts, which are renewed annually, will provide a steady base load of outside client revenue that is reasonably predictable and secure.

 

In addition to continued organic growth in the external client base, BLEST has developed several business development initiatives including water pollution control services and equipment specifically designed for the microbrewery sector.  They have developed a bundle of services and technology-based products to offer a total solution for legionella prevention in public buildings. They are evaluating similar approaches for the cannabis industry as well. These markets are expanding in areas across the United States and represent significant opportunities for BLEST.

 

BLEST management believes the company can expect growth in several additional areas. For one, BLEST is under contract to design, build, and install wastewater treatment equipment and “treatment trains” for clients in collaboration with BioLargo’s water technology subsidiary BioLargo Water. Not only does this represent important synergy between two BioLargo business units, but it offers BLEST the opportunity to become a total water treatment solutions provider for customers in the widely under-served small industrial wastewater treatment sector. Another area of predicted growth is the conduct of environmental engineering and permitting work for large industrial facilities such as fuel conversion plants, an area in which BLEST has experienced an increasing number of contracts in the past quarter.

 

 

BioLargo Water and the Advanced Oxidation System - AOS

 

BioLargo Water is our wholly owned subsidiary located on campus at the University of Alberta, Canada, that has been primarily engaged in the research and development of our Advanced Oxidation System (AOS).  The AOS is our patented water treatment device that generates a series of highly oxidative species of iodine and other molecules that, because of its proprietary configuration and inner constituents, allow it to eliminate pathogenic organisms and organic contaminants as water passes through the device and it performs with extreme efficacy while consuming very little electricity. Its key application is extremely efficient decontamination and the disinfection of various waste waters.

 

The key value proposition of the AOS is its ability to eliminate a wide variety of contaminants with high performance while consuming extremely low levels of input electricity and extremely low levels of chemistry inputs – a trait made possible by the complex set of highly oxidative iodine compounds generated within the AOS reactor. Our proof-of-concept studies and case studies have generated results that project the AOS will be more cost- and energy-efficient than commonly used advanced water treatment technologies such as UV, electro-chlorination, and ozonation. This value proposition sets the AOS technology above other water treatment options, as we believe the AOS may allow safe and reliable water treatment for significantly lower cost compared to its competitors and may even enable advanced water treatment in applications where it otherwise would have been prohibitively costly.

 

The AOS has the potential to allow reliable and cost-effective water treatment in numerous industries and applications where high-level disinfection or elimination of hard-to-treat organic contaminants is required. We believe the total serviceable market for our AOS is $10.75 billion for the poultry processing, food & beverage, and storm water segments with a target beachhead market for poultry processing in North America at an estimated $240 million.

 

Our AOS was the result of breakthroughs in both advanced iodine electrochemistry and advances in materials engineering, and its invention led to BioLargo’s co-founding of a multi-year industrial research chair whose goal was to solve the contaminated water issues associated with the Canadian Oil Sands at the University of Alberta Department of Engineering in conjunction with the top five oil companies in Canada, the regional water district, and various environmental agencies of the Canadian government. Based on recovering oil prices and our ongoing work in Canada, we recently reinitiated discussions with a number of stakeholders in the oil sands industry to support the completion of AOS development for oil and gas water treatment and to discuss the initiation of pre-commercial and commercial pilots for our AOS to help treat and remediate oil sands process-affected water (“OSPW”) found in tailings ponds in the Canadian oil sands, an application that currently has no good economically viable solution. We continue to apply for significant grant funding to re-initiate our work to help treat OSPW and other oil and gas wastewaters using the AOS. We believe that this opportunity requires substantial grant support to be viable for our company and, therefore we will continue to focus on energies on other markets until such time as resources are available.

 

Our AOS is an award-winning invention that is supported by science and engineering financial support and highly competitive grants (66 and counting) from various federal and provincial funding agencies in Canada such as NSERC, NRC- IRAP, and Alberta Innovates and in the United States by the Metropolitan Water District of Southern California and National Water Research Institute.

 

Our immediate goals for the development and commercialization of the AOS are: 1) to secure direct investment into the BioLargo Water subsidiary to empower its staff to complete its development cycle, 2) complete the ongoing pre-commercial field pilot studies which are necessary to generate the techno-economic data required to secure commercial trials, entice future customers, and commence traversal of necessary regulatory pathways, 3) conduct the first commercial trials with the AOS, and 4) secure first sale of the AOS. It is our belief that once pre-commercial pilots have concluded with the AOS, our ability to entice major water industry players to partner with BioLargo Water to accelerate market adoption of the AOS will be increased dramatically.

 

 

Recent AOS Milestones

 

The most important advances in AOS development in recent months have been 1) recent validation of the AOS as an effective tool to eliminate hard-to-treat “micropollutants” from wastewater; 2) design and engineering advances and changes to the AOS in preparation for piloting and scale-up for industrial flow-rates and conditions; and 3) the planning and design of pre-commercial field pilot projects.

 

One recent and important AOS milestone was the demonstration that it eliminated or reduced the toxicity of certain high-concern pharmaceutical byproducts (micropollutants) common in some municipal wastewater (“MWW”) streams. Those results, collected in a collaboration with researchers at the Centre Des Technologies de L’Eau, showed that the AOS had promise as a treatment tool for eliminating pharmaceutical pollutants such as carbamazepine, ibuprofen, and amoxicillin. In a follow-up study conducted in collaboration with Dr. Greg Goss PhD, an expert in aquatic organism toxicology at the University of Alberta, BioLargo Water sought to examine A) the environmental safety of AOS-treated MWW, and B) whether the AOS’ ability to eliminate pharmaceuticals from water would improve the environmental safety of MWW “spiked” with high concentrations of micropollutant contaminants. In this study, it was shown that water treated by the AOS technology was non-toxic in long-term exposure to aquatic organisms such as Daphnia, rainbow trout, and zebrafish embryos, under the experiential conditions examined. Additionally, the AOS reduced the toxic effects of MWW that has been experientially contaminated (spiked) with compounds known to negatively affects those organisms (benzo[a]pyrene and 17®-estradiol). Finally, the study also showed that the AOS can reduce the well-documented aberrant developmental effects of 17®-estradiol (an estrogen derivative) on rainbow trout. The AOS was successful in removing 17®-estradiol from MWW spiked with the hormone, thereby reducing the developmental effects of the compound. Importantly, the AOS was also able to reduce the effects of the 17®-estradiol and/or other hormones found normally in MWW (not spiked). These projects were funded in part by the Canadian government’s National Sciences and Engineering Research Council (NSERC). These results represent promising evidence that the AOS can remove micropollutants that are an emerging concern to the water treatment industry. Currently, there are no economically viable solutions to remove these compounds from MWW, and incumbent technologies fall short. We believe that the value proposition for our AOS for use as a tool for the municipal water treatment industry to efficiently remove micropollutants could increase our total serviceable market to 5% or more of the total industry which is recognized at + $700 billion globally or approximately $35 billion.

 

Several advances and improvements to the AOS have also been made in recent months with the purpose of preparing the technology for pre-commercial piloting, commercial piloting, and subsequent mass production, as well as to prepare it for scale-up to allow industrial flow rates. These advancements have largely been proprietary physical improvements to the AOS, including the transitioning of the AOS to using inner substrates more amenable to mass-production and greater flow rates and pressures. Management believes it will continue to advance the scale-up to higher volume throughputs of water flow and enhances the AOS ability to be more compact and longer lasting in the field.  This work is not complete, but management believes it does represent a significant step forward to achieving high throughput quality results. Importantly, we have also designed and begun assembling our own proprietary water treatment train that will be used in pilots for the AOS and that will pave the way for complete wastewater treatment in industrial settings.

 

Pre-commercial Pilot Projects for AOS

 

We are now underway on multiple pre-commercial field pilot projects. The first will treat poultry wastewater on-site at a poultry producer’s facility in Alberta Canada, with support from the Poultry Growers Association, where the AOS will be assessed for its ability to eliminate bacteria and other contaminants from the wastewater effectively and cost-efficiently and to establish operating costs (OPEX) and capital costs (CAPEX) in a field setting. Importantly, in this pilot, BioLargo Water is installing a complete “treatment train” with equipment to address all aspects of the client’s water treatment needs, including organic contaminants, suspended solids, and biological organisms. Therefore, this pilot also represents BioLargo’s first assessment as a “total solutions provider”, which could open the door for a wider array of future water treatment market opportunities. In the second pilot, the AOS will be used on-site at a Californian brewery as a polishing (final) step in an Aquacycl treatment train to eliminate bacteria and enable wastewater discharge in compliance with Californian regulatory standards. Aquacycl is an emerging waste-water treatment technology company based in the San Diego area that was introduced to our company by The Maritime Alliance, a trade organization in San Diego committed to fostering maritime business and technology innovation. We are a member organization, and our president has recently joined its board of directors . This pilot will help establish the efficacy of the AOS in a field setting, the OPEX and CAPEX of the system, and the AOS’ ability to “plug and play” in the context of diverse supporting equipment and logistics.

 

 

In addition to the poultry and brewery pilots, we are negotiating to begin a pilot to treat captured storm water for recycling and reuse that will be backed by a Canadian government grant and will include a leading city planning consultant in Southern California, a leading engineering firm dedicated to the water industry, and a prominent city based in Southern California. Storm water capture and reuse is an emerging market backed by the State of California pursuant to Measure W which sets aside an estimated $300 million a year from a tax to be used for public agencies to invest in related storm water capture and treatment infrastructure. Also, we were recently invited to participate in a pre-commercial pilot treating municipal wastewater in order to remove micropollutants which is organized by one of the leading engineering firms in the water industry in conjunction with prominent water treatment agency in the Pacific Northwest. Finally, we and a Chinese partner were awarded a grant co-funded by the governments of Canada and China to install an AOS pilot unit on-site at a petrochemical plant in Tianjin City, China, where the AOS would be used to eliminate hard-to-treat organic contaminants to new standards set by the Chinese government. However, we have not yet been able to verify the funding to be provided by the Chinese government to our collaborating partner, and thus are not yet fully committed to this project as it may require capital contributions that we are unwilling to commit to provide without additional funding.

 

All of these pilot projects represent an important step for our AOS technology, as well as for our company. We are confident in our disruptive water treatment technology and have proven its treatment capabilities in the lab ad nauseum. However, pilot projects for the AOS, as with any technology, are crucial to prove its reliability to industry stakeholders as well the capital cost and operating costs of our technology at-scale. These data will be critical to pave the way for future market adoption. As a reminder, we have many other pilots in evaluation to support this same cause.

 

We believe that our current designs for the AOS are cost-effective, commercially viable and should be ready for their first commercial launch in late 2019 or early 2020. We secured a patent on the AOS in 2018, and another in March 2019. We intend to continue refining and improving the AOS continually to accomplish a series of goals: expanded patent coverage, extended useful life, lower capital costs, lower energy costs, optimized performance, precise configurations for specific industry challenges, portability, and identifying its performance limits. Our current and most pressing goal for the AOS, as evidenced by the pilot projects described above, is to demonstrate its efficacy in field settings, which is a crucial and necessary step for the commercialization of any water treatment system.

 

Advanced Wound Care - Clyra Medical

 

We initially formed Clyra Medical to commercialize our technology in the medical products industry, which we believe can be disruptive to many competing product lines. Our initial product designs focus in the “advanced wound care” field, which includes traumatic injury, diabetic ulcers, and chronic hard-to-heal wounds. In late 2018, we also acquired our second technology, a stem cell therapy technology, SkinDisc, that is both complementary to our antimicrobial product designs and it also presents a high value proposition to offer stand-alone products to the advanced wound care industry to assist in regenerating tissue. With the addition of highly skilled team members with extensive experience and proven track record of success in the medical industry and, the addition of the SkinDisc, we have expanded our plans to focus and build out a complete line of products to deliver state of the art solutions to assist in healing wounds. Therefore, we are also presently evaluating a number of additional licensing opportunities to add complementary technologies and products to our medical products portfolio with the goal of offering a complete menu of proprietary and patent protected products to better serve the advanced wound care patient population with state-of-the-art medical products. We are presently seeking pre-market clearance for our first advanced wound care product (application in process), from the U.S. Food & Drug Administration (“FDA”) under Section 510(k) of the Food, Drug, and Cosmetic Act.

 

We believe the total addressable market for Clyra Medical’s existing product designs in the advanced wound care market, dental, orthopedics and regenerative tissue markets will exceed $2.5 billion by 2022.

 

Our first and original advanced wound care product combines the broad-spectrum antimicrobial capabilities of iodine in a platform complex that promotes and facilitates wound healing. Our products are highly differentiated from existing antimicrobials in multiple ways - by the gentle nature in which they perform, extremely low dosing of active ingredients, reduced product costs, extended antimicrobial activity, and biofilm efficacy. In addition, iodine has no known acquired microbial resistance, unlike many competing products. We believe the future markets for some of our product designs may also include infection control and wound therapy in orthopedics, dental and veterinary markets. We also intend to pursue and study the use of our technology as a complimentary and synergistic platform for use with regenerative tissue therapy.

 

 

We have three patent applications pending for medical products, and are preparing additional applications. While these patent applications are pending, we intend to continue expanding patent coverage as we refine and expand our medical products.

 

We are in the process of obtaining regulatory approval (pre-market clearance) from the FDA for our first advanced wound care product. These efforts are ongoing as of the date of this annual report. Although the process has taken considerable time and money, and we have faced a number of delays as a result of the FDA’s requirements of us, we remain highly encouraged by our current interactions with the FDA staff and our current position. The process has confirmed that our product design falls in the scope of the 510(k) process and the pathway to clearance has now been better defined by senior staff at FDA. We are about to commence a large animal study to confirm that the Clyra product has no long-term adverse effects on wound healing as requested by the FDA. We believe this testing will confirm our products completely safe for use as indicated, and the results in the FDA’s hands for their evaluation within six months. While we remain confident that we will ultimately receive premarket clearance for this product, we can make no assurance or prediction as to success of these efforts, and must wait patiently for the process with the FDA to conclude. The company has numerous medical device product designs that it intends to pursue in the future as resources permit.

 

It is important to recognize that our current antimicrobial product in application is unique as an extremely low dose iodine complex resulting in an extraordinary level of testing being required by the FDA, and because of this, FDA have extended the product application for an additional six months. This is highly unusual, and FDA staff are working with us in order to allow our team to be able to deliver the test results from the large animal study as requested. We believe this product’s future role in the advanced wound care industry will be disruptive to many incumbent competing products like silver, hypochlorous acid and even other iodine-based products and therefore our extraordinary investment of time and money will have significant opportunity to generate a considerable return on investment as the products find their way through the FDA process for clearance and then to market adoption. Simply stated, we believe it is worth it and that we will succeed.

 

Our second technology and its related products center around the SkinDisc technology which we acquired in late 2018 from Scion Solutions, LLC (“Scion”). (See “Scion Solutions Acquisition – SkinDisc”, below.) Scion is led by Spencer Brown, a medical device industry veteran with more than 35 years’ experience in sales, account management, and distribution in the medical device industry. The SkinDisc product was developed by Dr. Brock Liden, a renowned medical podiatrist and expert in wound care and diabetic limb salvage. The SkinDisc is a therapy product that uses a patient’s own bone marrow and plasma in a unique mixture to generate a cell-rich bio gel for use with chronic wounds. It has been tested in over 250 patient cases with no adverse effects, and has successfully aided in the salvage of limbs that otherwise would have been amputated. The regenerative tissue therapy technique has been shown to assist in successful wound closure in time frames as short at 4 to 7 weeks with one or two  applications and is patent pending.

 

Clyra Medical also continues to actively work on the development of new products. It recently added Julian Bejarano, PhD to its team as an expert scientific researcher with more than 11 years of experience leading fundamental and applied research projects related to materials science and nanotechnology. In particular, Dr. Bejarano has six years of experience in projects related to biomaterials for regenerative medicine and multifunctional nanoparticles for controlled drug delivery. He holds a Materials Engineering degree and a Masters in Materials Engineering from the Universidad del Valle, Colombia. He also holds a PhD in Engineering Sciences with emphasis in Materials Science from the Universidad de Chile, Chile. Dr. Bejarano was a visiting researcher during his PhD studies at the Institute of Biomaterials at the University of Erlangen-Nuremberg, Germany. Following his doctorate studies, Dr. Bejarano was a postdoctoral fellow at the Advanced Center for Chronic Diseases in Chile for three years and Research Advisor for the Group of Polymer Engineering at the Universidad de Chile. Moreover, he has outstanding skills in project management, R&D, and innovation. His projects have been focused on the development and characterization of composites materials based on metals, polymers and ceramics, synthesis of multifunctional nanoparticles, encapsulation of therapeutic agents, and biological evaluation of materials. His findings in materials research have been published by prestigious international journals and he has presented at several international events related to biomaterials and materials science.

 

 

Clyra’s management is focused on obtaining its FDA clearance and evaluating additional technologies for purchase or license that we believe will enhance the company’s competitive position in the advanced wound care field as well as increase the company’s overall valuation.

 

We are committed to see these advanced wound care products go to market and we believe they will make a positive impact for a greater good around the world and generate meaningful financial results for our stockholders.

 

Scion Solutions Acquisition – SkinDisc

 

On September 26, 2018, we and Clyra Medical agreed to a transaction whereby we would acquire the intangible assets of Scion Solutions, LLC (“Scion”), and in particular its stem cell-based technology, the SkinDisc, and the know-how of key team members to support further research as well as the sale and distribution of Clyra Medical’s products based on our BioLargo technologies.

 

The parties entered into a Stock Purchase Agreement and Plan of Reorganization (“Purchase Agreement”) whereby Clyra Medical acquired (and then sold to BioLargo) the Scion intangible assets, including the SkinDisc. The consideration provided to Scion is subject to an escrow agreement and earn out provisions and includes: (i) 21,000 shares of the Clyra Medical common stock; (ii) 10,000 shares of Clyra Medical common stock redeemable for BioLargo common shares (detailed below); and (iii) a promissory note in the principal amount of $1,250,000 to be paid through new capital investments and revenue, as detailed below. The Clyra Medical common stock was initially held in escrow subject to the new entity raising $1,000,000 “base capital” to fund its business operations, which was raised effective December 17, 2018 (see below). One-half of the common stock was released to scion, and the second half remains subject to the following performance metrics, each vesting one-fifth of the remaining shares of common stock: (a) notification of FDA premarket clearance of certain orthopedics products, or recognition by Clyra Medical of $100,000 gross revenue; (b) the recognition by Clyra Medical of $100,000 in aggregate gross revenue; (c) the granting of all or any part of the patent application for the SkinDisc product, or recognition by Clyra Medical of $500,000 in gross revenue; (d) recognition by Clyra Medical of $1,000,000 in aggregate gross revenue; and (e) recognition by Clyra Medical of $2,000,000 in gross revenue. In addition, Clyra and Scion entered into the $1,250,000 promissory note called for by the Purchase Agreement. The promissory note accrues interest at the rate of 5%. Principal and interest due under the note are to be paid periodically at a rate of 25% of investment proceeds received. If the note is not paid off within 18 months after the date of issuance, it is automatically extended for additional 12-month periods until the note is repaid in full. Payments after the initial 18-month maturity date are required to be made as investment proceeds are received, at a rate of 25% of such proceeds, and 5% of Clyra Medical’s gross revenues.

 

Immediately following Clyra Medical’s purchase of Scion’s assets, Clyra Medical sold to BioLargo the assets, along with 12,755 Clyra Medical common shares. In exchange, BioLargo issued Clyra Medical 7,142,858 shares of BioLargo common stock. Concurrently, BioLargo licensed back to Clyra Medical the Scion assets. Scion may exchange its 10,000 Clyra Medical common shares for the 7,142,858 shares of BioLargo common stock issued to Clyra Medical, subject to the escrow and earn-out provisions described above. As of December 31, 2018, per the Closing Agreement, one-half of these shares have been earned and thus may be redeemed, and one-half remain subject to the earn-out provisions.

 

On December 17, 2018, we entered into a closing agreement (“Closing Agreement”) reflecting the satisfaction of the obligation to raise $1,000,000 “base capital” established under the Purchase Agreement. With the satisfaction of the obligation to raise $1,000,000 in base capital, Clyra Medical agreed to release to Scion one-half of the shares of Clyra common stock exchanged for the Scion assets. The remaining Clyra Medical common shares remain subject to the Escrow Agreement dated September 26, 2018, subject to the metrics identified above. We were initially introduced to the SkinDisc product and Scion Solutions through Dr. Liden and Tanya Rhodes’s consulting work with Clyra Medical (both Dr. Liden and Ms. Rhodes have ownership interest in Scion). Prior to the execution of the above-described agreements, BioLargo did not have any material relationship with Scion’s founder Spencer Brown.

 

 

Intellectual Property

 

We have 20 patents issued, including 18 in the United States, and multiple pending. We believe these patents provide a foundation from which to continue building our patent portfolio, and we believe that our technology is sufficiently useful and novel that we have a reasonable basis upon which to rely on our patent protections. We also rely on trade secrets and technical know-how to establish and maintain additional protection of our intellectual property. As our capital resources permit, we expect to expand our patent protection as we continue to refine our inventions as well as make new discoveries. See the detailed discussion below of our patent portfolio.

 

We regard our intellectual property as critical to our ultimate success. Our goal is to obtain, maintain and enforce patent protection for our products and technologies in geographic areas of commercial interest and to protect our trade secrets and proprietary information through laws and contractual arrangements.

 

Our Chief Science Officer, Mr. Kenneth R. Code, has been involved in the research and development of the technology since 1997. He has participated in the Canadian Federal Scientific Research and Experimental Development program, and he was instrumental in the discovery, preparation and filing of the first technology patents. He has worked with manufacturers, distributors and suppliers in a wide variety of industries to gain a full appreciation of the potential applications and the methodologies applicable to our technology for their manufacture and performance. He continues to research methods and applications to continue to expand the potential uses of our technology as well as work to uncover new discoveries that may provide additional commercial applications to help solve real world problems in the field of disinfection.

 

We incurred approximately $1,700,000 in expense related to our research and development activities in 2018, an increase of approximately $100,000 over the prior year. We have shifted the focused in our Canadian research facility to focus on commercializing our AOS technology and thus expect these expenses to decrease in 2019.

 

We believe that our suite of intellectual property covers the presently targeted major areas of focus for our licensing strategy. The description of our intellectual property, at present, is as follows:

 

 

U.S. Patents

 

●         U.S. Patent 10,238,990, issued on March 26, 2019, and 10,051,866, issued on August 21, 2018, which protect our AOS system.

 

●         U.S. Patent 10,046,078, issued on August 14, 2018, relating to the misting systems that eliminate odors in waste transfer stations, landfills, and other waste handling facilities.

 

●         U.S. Patent 8,846,067, issued on September 30, 2014, which encompasses a method of treating a wound or burn on tissue to reduce microbe growth about a wound comprising applying an antimicrobial composition to the wound or burn on tissue using a proprietary stable iodine gel or liquid. This patent covers our technology as used in products being developed by our subsidiary, Clyra Medical Technologies.

 

●         U.S. Patent 8,757,253, issued on June 24, 2014, relating to the moderation of oil extraction waste environments.

 

●         U.S. Patent 8,734,559, issued on May 27, 2014, relating to the moderation of animal waste environments.

 

●         U.S. Patent 8,679,515 issued on March 25, 2014, titled “Activated Carbon Associated with Alkaline or Alkali Iodide,” which provides protection for our BioLargo® AOS filter.

 

 

●         U.S. Patent 8,642,057, issued on February 14, 2014, titled “Antimicrobial and Antiodor Solutions and Delivery Systems,” relating to our liquid antimicrobial solutions, including our gels, sprays and liquids imbedded into wipes and other substrates.

 

●         U.S. Patent 8,574,610, issued on November 5, 2013, relating to flowable powder compositions, including our cat litter additive.

 

●         U.S. Patent 8,257,749, issued on September 4, 2012, relating to the use of our technology as protection of against antimicrobial activity in environments that need to be protected or cleansed of microbial or chemical material. These environments include closed and open environments and absorbent sheet materials that exhibit stability until activated by aqueous environments. The field also includes novel particle technology, coating technology or micro-encapsulation technology to control the stability of chemicals that may be used to kill or inhibit the growth of microbes to water vapor or humidity for such applications.

 

●         U.S. Patent 8,226,964, issued on July 24, 2012, relating to use of our technology as a treatment of residue, deposits or coatings within large liquid carrying structures such as pipes, drains, ducts, conduits, run-offs, tunnels and the like, using iodine, delivered in a variety of physical forms and methods, including using its action to physically disrupt coatings. The iodine’s disruptive activity may be combined with other physical removal systems such as pigging, scraping, tunneling, etching or grooving systems or the like.

 

●         U.S. Patent 8,021,610, issued on September 20, 2011, titled “System providing antimicrobial activity to an environment,” relating to the reduction of microbial content in a land mass. Related to this patent are patents held in Canada and the European Union.

 

●         U.S. Patent 7,943,158, issued on May 17, 2011, titled “Absorbent systems providing antimicrobial activity,” relating to the reduction of microbial content by providing molecular iodine to stabilized reagents.

 

●         U.S. Patent 7,867,510, issued on January 11, 2011, titled “Material having antimicrobial activity when wet,” relating to articles for delivering stable iodine-generating compositions.

 

●         U.S. Patent 6,328,929, issued on December 11, 2001, titled “Method of delivering disinfectant in an absorbent substrate,” relating to method of delivering disinfectant in an absorbent substrate.

 

●         U.S. Patent 6,146,725, issued on November 14, 2000, titled “absorbent composition,” relating to an absorbent composition to be used in the transport of specimens of bodily fluids.

 

●         US Patent 9,414,601 granted August 16, 2016, relating to the use of an article for application to a surface to provide antimicrobial and/or anti-odor activity. At least one of the reagents is coated with a water-soluble, water dispersible or water-penetrable covering that prevents ambient conditions of 50% relative humidity at 25ºC from causing more than 10% of the total reagents exposed to the ambient conditions from reacting in a twenty-four hour period.

 

●         U.S. Patent 9,883,653 issued on February 8, 2018, which encompasses a litter composition used in the absorption of animal wastes.

 

Pending Patent Applications

 

Most recently, we filed two patent applications in the United States for our advanced wound care formulas. The inventions in these applications form the basis for the work at Clyra Medical and the products for which that subsidiary intends to seek FDA approval. In addition to these applications, we have filed patent applications in multiple foreign countries, including the European Union, pursuant to the PCT, and other provisional applications.

 

Subject to adequate financing, we intend to continue to expand and enhance our suite of intellectual property through ongoing focus on product development, new intellectual property development and patent applications, and further third-party testing and validations for specific areas of focus for commercial exploitation. We currently anticipate that additional patent applications will be filed during the next 12 months with the USPTO and the PCT, although we are uncertain of the cost of such patent filings, which will depend upon the number of such applications prepared and filed. The expense associated with seeking patent rights in multiple foreign countries is expensive and will require substantial ongoing capital resources. However, we cannot give any assurance that adequate capital will be available. Without adequate capital resources, we will be forced to abandon patent applications and irrevocably lose rights to our technologies.

 

 

Our Company

 

BioLargo, Inc. is a corporation organized under the laws of the state of Delaware. Our common stock is quoted on the OTC Markets OTCQB “Venture Marketplace” under the trading symbol “BLGO”.

 

Our corporate offices are located at 14921 Chestnut St., Westminster, California 92683. We have a research facility and offices at the University of Alberta in Canada, and our engineering team is located at 105 Fordham Road in Oak Ridge, Tennessee. Our telephone number is (888) 400-2863. We operate through multiple wholly-owned subsidiary entities, including: BioLargo Life Technologies, Inc., to hold our intellectual property; Odor-No-More, Inc., to manufacture, market, sell and distribute our odor control products; a Canadian subsidiary, BioLargo Water, Inc., for our Canadian research and development operations; BioLargo Development Corp., through which our employees are employed; BioLargo Engineering, Science & Technologies, LLC. Additionally, we own 46.3% of Clyra Medical Technologies, Inc., formed to develop and market medical products based on our technology.

 

Our principal corporate website is www.BioLargo.com. We also maintain a blog at www.biolargo.blogspot.com. A number of our products are offered at www.odornomore.com, www.cupridyne.com, and www.deodorall.com. We also maintain www.clyramedical.com, www.biolargowater.com, biolargowater.ca, and www.biolargoengineering.com. The information on our websites and blog is not, and shall not be deemed to be, a part of this Annual Report on Form 10-K.

 

Executive Officers

 

As of December 31, 2018 our executive officers were:

 

●

Dennis P. Calvert: Chief Executive Officer, President and Chairman of the Board

 

●

Charles K. Dargan II: Chief Financial Officer

 

●

Joseph L. Provenzano: Corporate Secretary and Vice President of Operations

 

Mr. Provenzano also serves as president of our wholly owned subsidiary, Odor-No-More, Inc. Steven V. Harrison is president of our subsidiary Clyra Medical Technologies, Inc. Mr. Calvert is president of our technology holding company, BioLargo Life Technologies, Inc., and of BioLargo Water USA, Inc. Richard Smith is president of our Canadian subsidiary BioLargo Water, Inc.

 

Employees

 

As of the date hereof, we had 25 full time employees. Our employees including professional engineers, masters of engineering, and PhDs, as well as sales, support and administrative personnel. We also utilize consultants on an as-needed basis who provide certain specified services to us.

 

 

ITEM 1A. RISK FACTORS

 

Our future results of operations, financial condition and liquidity and the market price for our securities are subject to numerous risks, many of which are driven by factors that we cannot control. The following cautionary discussion of risks, uncertainties and assumptions relevant to our business includes factors we believe could cause our actual results to differ materially from expected and historical results. Other factors beyond those listed below, including factors unknown to us and factors known to us which we have not currently determined to be material, could also adversely affect our business, results of operations, financial condition, prospects and cash flows. Also see “Forward-looking Statements” above.

 

Risks Relating to our Business

 

Our limited operating history makes evaluation of our business difficult.

 

We have limited and only nominal historical financial data upon which to base planned operating expenses or forecast accurately our future operating results. Because our operations are not yet sufficient to fund our operational expenses, we rely on investor capital to fund operations. Our limited operational history make it difficult to forecast the need for future financing activities. Further, our limited operating history will make it difficult for investors and securities analysts to evaluate our business and prospects. Our failure to address these risks and difficulties successfully could seriously harm us.

 

We have never generated any significant revenues, have a history of losses, and cannot assure you that we will ever become or remain profitable.

 

We have not yet generated any significant revenue from operations, and, accordingly, we have incurred net losses every year since our inception. To date, we have dedicated most of our financial resources to research and development, general and administrative expenses, and initial sales and marketing activities. We have funded the majority of our activities through the issuance of convertible debt or equity securities. Although sale of our CupriDyne Clean products are increasing, and we are devoting more energy and money to our sales and marketing activities, we continue to anticipate net losses and negative cash flow for the foreseeable future. We believe we have the opportunity to reach positive cash flow in 2019, although doing so depends on many factors, including our ability to fund sales and marketing activities, and the rate of client adoption. There can be no assurance that our revenues will be sufficient for us to become profitable in 2019 or future years, or thereafter maintain profitability. We may also face unforeseen problems, difficulties, expenses or delays in implementing our business plan, including generally the need for odor control products in solid waste handling operations, which we may not fully understand or be able to predict.

 

Our cash requirements are significant. We will require additional financing to sustain our operations and without it we may not be able to continue operations.

 

Our cash requirements and expenses will continue to be significant. Our net cash used in continuing operations for the year ended December 31, 2018 was almost $4,000,000, over $300,000 per month. During that same period, we generated only $1,364,000 in total gross revenues. Thus, in order to become profitable, we must significantly increase our revenues. Although our revenues are increasing through sales of our products and from our engineering division, we expect to continue to use cash in 2019 as it becomes available.

 

At December 31, 2018, we had working capital deficit of approximately $1,536,000. Our auditor’s report for the year ended December 31, 2018 includes an explanatory paragraph to their audit opinion stating that our recurring losses from operations and working capital deficiency raise substantial doubt about our ability to continue as a going concern. We do not currently have sufficient financial resources to fund our operations or those of our subsidiaries. Therefore, we need additional financing to continue these operations.

 

 

In August 2017, we entered into a three-year purchase agreement with Lincoln Park Capital Fund LLC (“Lincoln Park”) through which we may direct Lincoln Park to purchase shares of our common stock at prices that depend on the market price of our stock (the “LPC Agreement”). Over time, and subject to multiple limitations, we may direct Lincoln Park to purchase up to $10,000,000 of our common stock. Since inception of the LPC Agreement, through December 31, 2018, we directed Lincoln Park to purchase 4,025,733 shares of our common stock, and received $1,349,969 in proceeds. During the year ended December 31, 2018, we directed Lincoln Park to purchase 2,850,733 shares of our common stock, and received $838,884 in proceeds. The extent to which we rely on Lincoln Park as a source of funding in 2019 will depend on a number of factors, including the prevailing market price of our common stock, and the extent to which we are able to secure working capital from other sources. If obtaining sufficient funding from Lincoln Park were to prove unavailable or prohibitively dilutive, we will need to secure another source of funding in order to satisfy our working capital needs. Even if we were receive the full maximum commitment of $10,000,000 in aggregate gross proceeds from sales of our common stock to Lincoln Park during the three year term of the LPC Agreement, we may still need additional capital to fully implement our business, operating and development plans. Should the financing we require to sustain our working capital needs be unavailable or prohibitively expensive when we require it, the consequences could be a material adverse effect on our business, operating results, financial condition and prospects.

 

From time to time, we issue stock, instead of cash, to pay some of our operating expenses. These issuances are dilutive to our existing stockholders.

 

We are party to agreements that provide for the payment of, or permit us to pay at our option, securities rather than cash in consideration for services provided to us. We include these provisions in agreements to allow us to preserve cash. When we pay employees, vendors and consultants in stock or stock options, we do so at a premium. We anticipate that we will continue to do so in the future. All such issuances are dilutive to our stockholders because they increase (and will increase in the future) the total number of shares of our common stock issued and outstanding, even though such arrangements assist us with managing our cash flow. These issuances also increase the expense amount recorded.

 

Our stockholders face further potential dilution in any new financing.

 

Our private securities offerings typically provide for convertible securities, including notes and warrants. Any additional capital that we raise would dilute the interest of the current stockholders and any persons who may become stockholders before such financing. Given the low price of our common stock, such dilution in any financing of a significant amount could be substantial.

 

Our stockholders face further potential adverse effects from the terms of any preferred stock that may be issued in the future.

 

In order to raise capital to meet expenses or to acquire a business, our board of directors may issue additional stock, including preferred stock. Any preferred stock that we may issue may have voting rights, liquidation preferences, redemption rights and other rights, preferences and privileges. The rights of the holders of our common stock will be subject to, and in many respects subordinate to, the rights of the holders of any such preferred stock. Furthermore, such preferred stock may have other rights, including economic rights, senior to our common stock that could have a material adverse effect on the value of our common stock. Preferred stock, while providing desirable flexibility in connection with possible acquisitions and other corporate purposes, can also have the effect of making it more difficult for a third party to acquire a majority of our outstanding voting stock, thereby delaying, deferring or preventing a change in control of our company.

 

There are several specific business opportunities we are considering in further development of our business. None of these opportunities is yet the subject of a definitive agreement, and most or all of these opportunities will require additional funding obligations on our part, for which funding is not currently in place.

 

In furtherance of our business plan, we are presently considering a number of opportunities to promote our business, to further develop and broaden, and to license, our technology with third parties. While discussions are underway with respect to such opportunities, there are no definitive agreements in place with respect to any of such opportunities at this time. There can be no assurance that any of such opportunities being discussed will result in definitive agreements or, if definitive agreements are entered into, that they will be on terms that are favorable to us.

 

 

Moreover, should any of these opportunities result in definitive agreements being executed or consummated, we may be required to expend additional monies above and beyond our current operating budget to promote such endeavors. No such financing is in place at this time for such endeavors, and we cannot assure you that any such financing will be available, or if it is available, whether it will be on terms that are favorable to our company.

 

We expect to incur future losses and may not be able to achieve profitability.

 

Although we are generating limited revenue from the sale of our products, and we expect to generate revenue from new products we are introducing, and eventually from other license or supply agreements, we anticipate net losses and negative cash flow to continue for the foreseeable future until our products are expanded in the marketplace and they gain broader acceptance by resellers and customers. Our current level of sales is not sufficient to support the financial needs of our business. We cannot predict when or if sales volumes will be sufficiently large to cover our operating expenses. We intend to expand our marketing efforts of our products as financial resources are available, and we intend to continue to expand our research and development efforts. Consequently, we will need to generate significant additional revenue or seek additional financings to fund our operations. This has put a proportionate corresponding demand on capital. Our ability to achieve profitability is dependent upon our efforts to deliver a viable product and our ability to successfully bring it to market, which we are currently pursuing. Although our management is optimistic that we will succeed in licensing our technology, we cannot be certain as to timing or whether we will generate sufficient revenue to be able to operate profitably. If we cannot achieve or sustain profitability, then we may not be able to fund our expected cash needs or continue our operations. If we are not able to devote adequate resources to promote commercialization of our technology, then our business plans will suffer and may fail.

 

Because we have limited resources to devote to sales, marketing and licensing efforts with respect to our technology, any delay in such efforts may jeopardize future research and development of technologies and commercialization of our technology. Although our management believes that it can finance commercialization efforts through sales of our securities and possibly other capital sources, if we do not successfully bring our technology to market, our ability to generate revenues will be adversely affected.

 

Our internal controls are not effective.

 

We have determined that our disclosure controls and procedures and our internal control over financial reporting are currently not effective. The lack of effective internal controls could materially adversely affect our financial condition and ability to carry out our business plan.

 

Our management team for financial reporting, under the supervision and with the participation of our chief executive officer and our chief financial officer, conducted an evaluation of the effectiveness of the design and operation of our internal controls. Recognizing the dynamic nature and growth of the Company’s business in the year ended December 31, 2018, including the growth of the core operations and the increase in the number of employees, management has recognized the strain on the overall internal control environment. As a result, management has concluded that its internal controls over financial reporting are not effective. Management identified a material weakness with respect to deficiencies in its financial closing and reporting procedures. Management believes this is due to a lack of resources. Management intends to add accounting personnel and operating staff and more sophisticated systems in order to improve its reporting procedures and internal controls, subject to available capital. Until we have adequate resources to increase address these issues, any material weaknesses may materially adversely affect our ability to report accurately our financial condition and results of operations in the future in a timely and reliable manner. In addition, although we continually review and evaluate internal control systems to allow management to report on the sufficiency of our internal controls, we cannot assure you that we will not discover additional weaknesses in our internal control over financial reporting. Any such additional weakness or failure to remediate the existing weakness could materially adversely affect our financial condition or ability to comply with applicable financial reporting requirements and the requirements of the Company’s various financing agreements.

 

 

If we are not able to manage our anticipated growth effectively, we may not become profitable.

 

We anticipate that expansion will continue to be required to address potential market opportunities for our technology and our products. Our existing infrastructure is limited. While we believe our current manufacturing processes as well as our office and warehousing provide the basic resources to expand as we grow sales of CupriDyne Clean to more than $2 million per month, our infrastructure will need more staffing to support manufacturing, customer service, administration as well as sales/account executive functions. There can be no assurance that we will have the financial resources to create new infrastructure, or that any such infrastructure will be sufficiently scalable to manage future growth, if any. There also can be no assurance that, if we invest in additional infrastructure, we will be effective in expanding our operations or that our systems, procedures or controls will be adequate to support such expansion. In addition, we will need to provide additional sales and support services to our partners if we achieve our anticipated growth with respect to the sale of our technology for various applications. Failure to properly manage an increase in customer demands could result in a material adverse effect on customer satisfaction, our ability to meet our contractual obligations, and our operating results.

 

Some of the products incorporating our technology will require regulatory approval.

 

The products in which our technology may be incorporated have both regulated and non-regulated applications. The regulatory approvals for certain applications may be difficult, impossible, time consuming and/or expensive to obtain. While our management believes such approvals can be obtained for the applications contemplated, until those approvals from the FDA or the EPA or other regulatory bodies, at the federal and state levels, as may be required are obtained, we may not be able to generate commercial revenues for regulated products. Certain specific regulated applications and their use require highly technical analysis and additional third-party validation and will require regulatory approvals from organizations like the FDA. Certain applications may also be subject to additional state and local agency regulations, increasing the cost and time associated with commercial strategies. Additionally, most products incorporating our technology that may be sold in the European Union (“EU”) will require EU and possibly also individual country regulatory approval. All such approvals, including additional testing, are time-consuming, expensive and do not have assured outcomes of ultimate regulatory approval.

 

We need to outsource and rely on third parties for the manufacture of the chemicals, material components or delivery apparatus used in our technology, and part of our future success will be dependent on the timeliness and effectiveness of the efforts of these third parties. 

 

We do not have the required financial and human resources or capability to manufacture the chemicals necessary to make our odor control products. Our business model calls for the outsourcing of the manufacture of these chemicals in order to reduce our capital and infrastructure costs as a means of potentially improving our financial position and the profitability of our business. Accordingly, we must enter agreements with other companies that can assist us and provide certain capabilities, including sourcing and manufacturing, which we do not possess. We may not be successful in entering into such alliances on favorable terms or at all. Even if we do succeed in securing such agreements, we may not be able to maintain them. Furthermore, any delay in entering into agreements could delay the development and commercialization of our technology or reduce its competitiveness even if it reaches the market. Any such delay related to such future agreements could adversely affect our business.

 

If any party to which we have outsourced certain functions fails to perform its obligations under agreements with us, the commercialization of our technology could be delayed or curtailed.

 

To the extent that we rely on other companies to manufacture the chemicals used in our technology, or sell or market products incorporating our technology, we will be dependent on the timeliness and effectiveness of their efforts. If any of these parties does not perform its obligations in a timely and effective manner, the commercialization of our technology could be delayed or curtailed because we may not have sufficient financial resources or capabilities to continue such efforts on our own.

 

 

We rely on a small number of key supply ingredients in order to manufacture our products.

 

All of the supply ingredients used to manufacture our products are readily available from multiple suppliers. However, commodity prices for these ingredients can vary significantly, and the margins that we are able to generate could decline if prices rise. If our manufacturing costs rise significantly, we may be forced to raise the prices for our products, which may reduce their acceptance in the marketplace.

 

If our technology or products incorporating our technology do not gain market acceptance, it is unlikely that we will become profitable.

 

The potential markets for products into which our technology can be incorporated are rapidly evolving, and we have many successful competitors including some of the largest and most well-established companies in the world. (see, herein: “Description At this time, our technology is unproven in all but one industry – waste management – and the use of our technology by others, and the sales of our products, is relatively nominal. The commercial success of products incorporating our technology will depend on the adoption of our technology by commercial and consumer end users in various fields.

 

 Market acceptance may depend on many factors, including:

 

●

the willingness and ability of consumers and industry partners to adopt new technologies from a company with little or no history in the industry;

 

●

our ability to convince potential industry partners and consumers that our technology is an attractive alternative to other competing technologies;

 

●

our ability to license our technology in a commercially effective manner;

 

●

our ability to continue to fund operations while our products move through the process of gaining acceptance, before the time in which we are able to scale up production to obtain economies of scale; and

 

●

our ability to overcome brand loyalties.

 

If products incorporating our technology do not achieve a significant level of market acceptance, then demand for our technology itself may not develop as expected, and, in such event, it is unlikely that we will become profitable. 

 

Any revenues that we may earn in the future are unpredictable, and our operating results are likely to fluctuate from quarter to quarter.

 

We believe that our future operating results will fluctuate due to a variety of factors, including:

 

●

delays in product development by us or third parties;

 

●

market acceptance of products incorporating our technology;

 

●

changes in the demand for, and pricing of, products incorporating our technology;

 

●

competition and pricing pressure from competitive products; and

 

●

expenses related to, and the results of, proceedings relating to our intellectual property.

 

 

We expect our operating expenses will continue to fluctuate significantly in 2019 and beyond, as we continue our research and development and increase our marketing and licensing activities. Although we expect to generate revenues from licensing our technology in the future, revenues may decline or not grow as anticipated, and our operating results could be substantially harmed for a particular fiscal period. Moreover, our operating results in some quarters may not meet the expectations of stock market analysts and investors. In that case, our stock price most likely would decline.

 

Some of our revenue is dependent on the award of new contracts from the U.S. government, which we do not directly control.

 

A substantial portion of our revenue and is generated from sales to the U.S. defense logistics agency through a bid process in response to request for bids. The timing and size of requests for bids is unpredictable and outside of our control. The number of other companies competing for these bids is also unpredictable and outside of our control. In the event of more competition for these awards, we may have to reduce our margins. These variables make it difficult to predict when or if we will sell more products to the US government, which in turns makes it difficult to stock inventory and purchase raw materials.

 

We have limited product distribution experience, and we rely in part on third parties who may not successfully sell our products.

 

We have limited product distribution experience and rely in part on product distribution arrangements with third parties. In our future product offerings, we may rely solely on third parties for product sales and distribution. We also plan to license our technology to certain third parties for commercialization of certain applications. We expect to enter into additional distribution agreements and licensing agreements in the future, and we may not be able to enter into these additional agreements on terms that are favorable to us, if at all. In addition, we may have limited or no control over the distribution activities of these third parties. These third parties could sell competing products and may devote insufficient sales efforts to our products. As a result, our future revenues from sales of our products, if any, will depend on the success of the efforts of these third parties.

 

We may not be able to attract or retain qualified senior personnel.

 

We believe we are currently able to manage our current business with our existing management team. However, as we expand the scope of our operations, we will need to obtain the full-time services of additional senior management and other personnel. Competition for highly-skilled personnel is intense, and there can be no assurance that we will be able to attract or retain qualified senior personnel. Our failure to do so could have an adverse effect on our ability to implement our business plan. As we add full-time senior personnel, our overhead expenses for salaries and related items will increase from current levels and, depending upon the number of personnel we hire and their compensation packages, these increases could be substantial.

 

If we lose our key personnel or are unable to attract and retain additional personnel, we may be unable to achieve profitability.

 

Our future success is substantially dependent on the efforts of our senior management, particularly Dennis P. Calvert, our president and chief executive officer. The loss of the services of Mr. Calvert or other members of our senior management may significantly delay or prevent the achievement of product development and other business objectives. Because of the scientific nature of our business, we depend substantially on our ability to attract and retain qualified marketing, scientific and technical personnel. There is intense competition among specialized and technologically-oriented companies for qualified personnel in the areas of our activities. If we lose the services of, or do not successfully recruit, key marketing, scientific and technical personnel, then the growth of our business could be substantially impaired. At present, we do not maintain key man insurance for any of our senior management, although management is evaluating the potential of securing this type of insurance in the future as may be available.

 

 

Nondisclosure agreements with employees and others may not adequately prevent disclosure of trade secrets and other proprietary information.

 

In order to protect our proprietary technology and processes, we rely in part on nondisclosure agreements with our employees, potential licensing partners, potential manufacturing partners, testing facilities, universities, consultants, agents and other organizations to which we disclose our proprietary information. These agreements may not effectively prevent disclosure of confidential information and may not provide an adequate remedy in the event of unauthorized disclosure of confidential information. In addition, others may independently discover trade secrets and proprietary information, and in such cases we could not assert any trade secret rights against such parties. Costly and time-consuming litigation could be necessary to enforce and determine the scope of our proprietary rights, and failure to obtain or maintain trade secret protection could adversely affect our competitive business position. Since we rely on trade secrets and nondisclosure agreements, in addition to patents, to protect some of our intellectual property, there is a risk that third parties may obtain and improperly utilize our proprietary information to our competitive disadvantage. We may not be able to detect unauthorized use or take appropriate and timely steps to enforce our intellectual property rights.

 

We may become subject to product liability claims.

 

As a business that manufactures and markets products for use by consumers and institutions, we may become liable for any damage caused by our products, whether used in the manner intended or not. Any such claim of liability, whether meritorious or not, could be time-consuming and/or result in costly litigation. Although we maintain general liability insurance, our insurance may not cover potential claims of the types described above and may not be adequate to indemnify for all liabilities that may be imposed. Any imposition of liability that is not covered by insurance or is in excess of insurance coverage could harm our business and operating results, and you may lose some or all of any investment you have made, or may make, in our company.

 

Litigation or the actions of regulatory authorities may harm our business or otherwise distract our management.

 

Substantial, complex or extended litigation could cause us to incur major expenditures and distract our management. For example, lawsuits by employees, former employees, investors, stockholders, partners, customers or others, or actions taken by regulatory authorities, could be very costly and substantially disrupt our business. As a result of our financing activities over time, and by virtue of the number of people that have invested in our company, we face increased risk of lawsuits from investors. Such lawsuits or actions could from time to time be filed against our company and/or our executive officers and directors. Such lawsuits and actions are not uncommon, and we cannot assure you that we will always be able to resolve such disputes or actions on terms favorable to our company.

 

If we suffer negative publicity concerning the safety or efficacy of our products, our sales may be harmed.

 

If concerns should arise about the safety or efficacy of any of our products that are marketed, regardless of whether or not such concerns have a basis in generally accepted science or peer-reviewed scientific research, such concerns could adversely affect the market for those products. Similarly, negative publicity could result in an increased number of product liability claims, whether or not those claims are supported by applicable law.

 

The licensing of our technology or the manufacture, use or sale of products incorporating our technology may infringe on the patent rights of others, and we may be forced to litigate if an intellectual property dispute arises.

 

If we infringe or are alleged to have infringed another party’s patent rights, we may be required to seek a license, defend an infringement action or challenge the validity of the patents in court. Patent litigation is costly and time consuming. We may not have sufficient resources to bring these actions to a successful conclusion. In addition, if we do not obtain a license, do not successfully defend an infringement action or are unable to have infringed patents declared invalid, we may:

 

●

incur substantial monetary damages;

 

 

●

encounter significant delays in marketing our current and proposed product candidates;

 

●

be unable to conduct or participate in the manufacture, use or sale of product candidates or methods of treatment requiring licenses;

 

●

lose patent protection for our inventions and products; or

 

●

find our patents are unenforceable, invalid or have a reduced scope of protection

 

Parties making such claims may be able to obtain injunctive relief that could effectively block our company’s ability to further develop or commercialize our current and proposed product candidates in the United States and abroad and could result in the award of substantial damages. Defense of any lawsuit or failure to obtain any such license could substantially harm our company. Litigation, regardless of outcome, could result in substantial cost to, and a diversion of efforts by, our company.

 

Our patents are expensive to maintain, our patent applications are expensive to prosecute, and thus we are unable to file for patent protection in many countries.

 

Our ability to compete effectively will depend in part on our ability to develop and maintain proprietary aspects of our technology and either to operate without infringing the proprietary rights of others or to obtain rights to technology owned by third parties. Pending patent applications relating to our technology may not result in the issuance of any patents or any issued patents that will offer protection against competitors with similar technology. We must employ patent attorneys to prosecute our patent applications both in the United States and internationally. International patent protection requires the retention of patent counsel and the payment of patent application fees in each foreign country in which we desire patent protection, on or before filing deadlines set forth by the International Patent Cooperation Treaty (“PCT”). We therefore choose to file patent applications only in foreign countries where we believe the commercial opportunities require it, considering our available financial resources and the needs for our technology. This has resulted, and will continue to result, in the irrevocable loss of patent rights in all but a few foreign jurisdictions.

 

Patents we receive may be challenged, invalidated or circumvented in the future, or the rights created by those patents may not provide a competitive advantage. We also rely on trade secrets, technical know-how and continuing invention to develop and maintain our competitive position. Others may independently develop substantially equivalent proprietary information and techniques or otherwise gain access to our trade secrets.

 

We are subject to risks related to future business outside of the United States.

 

Over time, we may develop business relationships outside of North America, and as those efforts are pursued, we will face risks related to those relationships such as:

 

●

foreign currency fluctuations;

 

●

unstable political, economic, financial and market conditions;

 

●

import and export license requirements;

 

●

trade restrictions;

 

●

increases in tariffs and taxes;

 

●

high levels of inflation;

 

●

restrictions on repatriating foreign profits back to the United States;

 

 

●

greater difficulty collecting accounts receivable and longer payment cycles;

 

●

less favorable intellectual property laws, and the lack of intellectual property legal protection;

 

●

regulatory requirements;

 

●

unfamiliarity with foreign laws and regulations; and

 

●

changes in labor conditions and difficulties in staffing and managing international operations.

 

The volatility of certain raw material costs may adversely affect operations and competitive price advantages for products that incorporate our technology.

 

Most of the chemicals and other key materials that we use in our business, such as minerals, fiber materials and packaging materials, are neither generally scarce nor price sensitive, but prices for such chemicals and materials can be cyclical. Super Absorbent Polymer (SAP) beads, which are a petrochemical derivative, have been subject to periodic scarcity and price volatility from time to time during recent years, although prices are relatively stable at present. Should the volume of our sales increase dramatically, we may have difficulty obtaining SAP beads or other raw materials at a favorable price. Supply and demand factors, which are beyond our control, generally affect the price of our raw materials. We try to minimize the effect of price increases through production efficiency and the use of alternative suppliers, but these efforts are limited by the size of our operations. If we are unable to minimize the effects of increased raw material costs, our business, financial condition, results of operations and cash flows may be materially adversely affected.

 

Certain of our products sales historically have been highly impacted by fluctuations in seasons and weather.

 

Industrial odor control products have proven highly effective in controlling volatile organic compounds that are released as vapors produced by decomposing waste material. Such vapors are produced with the highest degree of intensity in temperatures between 40 degrees Fahrenheit (5 degrees Celsius) and 140 degrees Fahrenheit (60 degrees Celsius). When weather patterns are cold or in times of precipitation, our clients are less prone to use our odor control products, presumably because such vapors are less noticeable or, in the case of precipitation, can be washed away or altered. This leads to unpredictability in use and sales patterns for, especially, our CupriDyne Clean product line which accounts for over one-half our total sales.

 

The cost of maintaining our public company reporting obligations is high.

 

We are obligated to maintain our periodic public filings and public reporting requirements, on a timely basis, under the rules and regulations of the SEC. In order to meet these obligations, we will need to continue to raise capital. If adequate funds are not available, we will be unable to comply with those requirements and could cease to be qualified to have our stock traded in the public market. As a public company, we incur significant legal, accounting and other expenses. In addition, the Sarbanes-Oxley Act of 2002, as well as related rules adopted by the SEC, has imposed substantial requirements on public companies, including certain corporate governance practices and requirements relating to internal control over financial reporting under Section 404 of the Sarbanes-Oxley Act.

 

 

Risks Relating to our Common Stock

 

The sale or issuance of our common stock to Lincoln Park may cause dilution, and the sale of the shares of common stock acquired by Lincoln Park, or the perception that such sales may occur, could cause the price of our common stock to fall.

 

On August 25, 2017, we entered into the LPC Agreement with Lincoln Park, pursuant to which Lincoln Park has committed to purchase up to $10,000,000 of our common stock, noted above in our Risks Related to our Business. We generally have the right to control the timing and amount of any sales of our shares to Lincoln Park. Sales of our common stock, if any, to Lincoln Park will depend on market conditions and other factors to be determined by us. We may ultimately decide to sell to Lincoln Park all, some or none of the shares of our common stock that may be available for us to sell pursuant to the LPC Agreement. If and when we do sell shares to Lincoln Park, after Lincoln Park has acquired the shares, Lincoln Park may resell all, some or none of those shares at any time or from time to time in its discretion. Therefore, sales to Lincoln Park by us could result in substantial dilution to the interests of other holders of our common stock, as well as sales of our stock by Lincoln Park into the open market causing reductions in the price of our common stock. Additionally, the sale of a substantial number of shares of our common stock to Lincoln Park, or the anticipation of such sales, could make it more difficult for us to sell equity or equity-related securities in the future at a time and at a price that we might otherwise desire to effect sales.

 

Our common stock is thinly traded and largely illiquid.

 

Our stock is currently quoted on the OTC Markets (OTCQB). Being quoted on the OTCQB has made it more difficult to buy or sell our stock and from time to time has led to a significant decline in the frequency of trades and trading volume. Continued trading on the OTCQB will also likely adversely affect our ability to obtain financing in the future due to the decreased liquidity of our shares and other restrictions that certain investors have for investing in OTCQB traded securities. While we intend to seek listing on the Nasdaq Stock Market (“Nasdaq”) or another national stock exchange when our company is eligible, there can be no assurance when or if our common stock will be listed on Nasdaq or another national stock exchange.

 

The market price of our stock is subject to volatility.

 

●

Because our stock is thinly traded, its price can change dramatically over short periods, even in a single day. An investment in our stock is subject to such volatility and, consequently, is subject to significant risk. The market price of our common stock could fluctuate widely in response to many factors, including:

 

●

developments with respect to patents or proprietary rights;

 

●

announcements of technological innovations by us or our competitors;

 

●

announcements of new products or new contracts by us or our competitors;

 

●

actual or anticipated variations in our operating results due to the level of development expenses and other factors;

 

●

changes in financial estimates by securities analysts and whether any future earnings of ours meet or exceed such estimates;

 

●

conditions and trends in our industry;

 

●

new accounting standards;

 

●

general economic, political and market conditions and other factors; and

 

●

the occurrence of any of the risks described in this Annual Report.

 

 

You may have difficulty selling our shares because they are deemed “penny stocks”.

 

Because our common stock is not quoted on the Nasdaq National Market or Nasdaq Capital Market or listed on a national securities exchange, if the trading price of our common stock remains below $5.00 per share, which we expect for the foreseeable future, trading in our common stock will be subject to the requirements of certain rules promulgated under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), which require additional disclosure by broker-dealers in connection with any trades involving a stock defined as a penny stock (generally, any non-Nasdaq equity security that has a market price of less than $5.00 per share, subject to certain exceptions). Such rules require the delivery, before any penny stock transaction, of a disclosure schedule explaining the penny stock market and the risks associated therewith and impose various sales practice requirements on broker-dealers who sell penny stocks to persons other than established customers and accredited investors (generally defined as an investor with a net worth in excess of $1,000,000 or annual income exceeding $200,000 individually or $300,000 together with a spouse). For these types of transactions, the broker-dealer must make a special suitability determination for the purchaser and have received the purchaser’s written consent to the transaction before the sale. The broker-dealer also must disclose the commissions payable to the broker-dealer and current bid and offer quotations for the penny stock and, if the broker-dealer is the sole market-maker, the broker-dealer must disclose this fact and the broker-dealer’s presumed control over the market. Such information must be provided to the customer orally or in writing before or with the written confirmation of trade sent to the customer. Monthly statements must be sent disclosing recent price information for the penny stock held in the account and information on the limited market in penny stocks. The additional burdens imposed on broker-dealers by such requirements could discourage broker-dealers from effecting transactions in our common stock, which could severely limit the market liquidity of our common stock and the ability of holders of our common stock to sell their shares.

 

Because our shares are deemed “penny stocks,” new rules make it more difficult to remove restrictive legends.

 

Rules put in place by the Financial Industry Regulatory Authority (FINRA) require broker-dealers to perform due diligence before depositing unrestricted common shares of penny stocks, and as such, some broker-dealers, including many large national firms (such as eTrade and Charles Schwab), are refusing to deposit previously restricted common shares of penny stocks. As such, it may be more difficult for purchases of shares in our private securities offerings to deposit the shares with broker-dealers and sell those shares on the open market.

 

Because we will not pay dividends in the foreseeable future, stockholders will only benefit from owning common stock if it appreciates.

 

We have never declared or paid a cash dividend to stockholders. We intend to retain any earnings that may be generated in the future to finance operations. Accordingly, any potential investor who anticipates the need for current dividends from his investment should not purchase our common stock.

 

 

ITEM 1B. UNRESOLVED STAFF COMMENTS

 

None.

 

ITEM 2. PROPERTIES

 

Our company owns no real property. We currently lease approximately 9,000 square feet of office and industrial space at 14921 Chestnut St., Westminster, CA 92683. The current lease term is from September 1, 2016 to August 31, 2020, at a monthly rent of $8,379. In addition to serving as our principal offices, it is also a manufacturing facility where we manufacture our products, including our CupriDyne Clean Industrial Odor, and Specimen Transport Solidifiers.

 

We also lease approximately 13,000 square feet of office and warehouse space at 105 Fordham Road, Oak Ridge, Tennessee, 37830, for our professional engineering division. The lease term is from September 1, 2017 through August 31, 2020, at a monthly rent of $5,400.

 

We also lease approximately 1,500 square feet of office and lab space from the University of Alberta. The current lease term expires June 30, 2019, at monthly rent of $5,729 Canadian dollars. These offices serve as our primary research and development facilities.

 

Our telephone number is (888) 400-2863.

 

 

ITEM 3. LEGAL PROCEEDINGS

 

Our company is not a party to any legal proceeding.

 

 

PART II

 

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASE OF EQUITY SECURITIES

 

Market Information

 

Since January 23, 2008, our common stock has been quoted on the OTC Markets “OTCQB” marketplace (formerly known as the “OTC Bulletin Board”) under the trading symbol “BLGO”.

 

The table below represents the quarterly high and low closing prices of our common stock for the last two fiscal years as reported by Yahoo Finance.

 

		2017								2018
		High				Low				High				Low
First Quarter		$	0.83			$	0.47			$	0.41			$	0.21
Second Quarter		$	0.53			$	0.39			$	0.45			$	0.23
Third Quarter		$	0.66			$	0.42			$	0.45			$	0.22
Fourth Quarter		$	0.52			$	0.39			$	0.30			$	0.18

 

 

The closing bid price for our common stock on March 22, 2019, was $0.187 per share. As of such date, there were approximately 645 registered owners of approximately 88,000,000 shares of our common stock, and approximately 2,500 beneficial owners (held in street name) of approximately 55,000,000 shares.

 

Dividends

 

We have never declared or paid a cash dividend to stockholders. We intend to retain any earnings which may be generated in the future to finance operations.

 

 

Securities Authorized for Issuance Pursuant to Equity Compensation Plans

 

Equity Compensation Plan Information as of December 31, 2018

 

Plan Category	Number of securities to be issued upon exercise of outstanding options, warrants and rights (a)	Weighted average exercise price of outstanding options, warrants and rights (b)	Number of securities remaining available for future issuance (c)
Equity compensation plans approved by security holders	11,010,103(1)	$0.42	38,681,483
Equity compensation plans not approved by security holders(2)	19,319,496	$0.43	n/a
Total	30,329,599	$0.57	38,681,483

 

 

(1)	Includes 9,721,586 shares issuable under the 2007 Equity Plan, which expired September 6, 2017, and 1,288,517 shares issuable under the 2018 Equity Incentive Plan adopted by the Board on March 7, 2018 and subsequently approved by stockholders on May 23, 2018.
(2)	This includes various issuances to specific individuals either as a conversion of un-paid obligations pursuant to a plan adopted by our board of directors, or as part of their agreement for services.

 

 

Sales of Unregistered Securities

 

The following is a report of the sales of unregistered securities in the past three years not previously reported in a Quarterly Report on Form 10-Q or in a Current Report on Form 8-K.

 

On October 12, November 21 and December 19, 2018, we issued 4,434, 7,514 and 27,380 shares, respectively, of our common stock for $10,000 of interest due to our note and line of credit holders.

 

On October 16, November 16 and on December 16, 2018, we issued 37,693, 43,384 and 44,053 shares, respectively, of our common stock pursuant to a consulting agreement totaling $29,916 for services to our company.

 

On November 21, 2018, we issued 340,848 shares of our common stock to an investor who elected to convert $100,000 principal amount of convertible notes. Of that amount, 333,334 shares were issued as payment of principal, and 7,514 shares as payment of outstanding interest.

 

On December 19, 2018, we issued 666,668 shares of our common stock to Vista Capital upon its election to convert $166,667 of the Vista 2017 Note. Of that amount, 639,288 shares were issued as payment of principal, and 27,380 shares as payment of interest.

 

On December 18, 2018, we issued 7,142,858 shares of our common stock to Clyra Medical as consideration for our acquisition of (i) the Scion intellectual property and (ii) 12,755 shares of Clyra Medical common stock (see Part I, Item I, “Advanced Wound Care – Clyra Medical”). .

 

On December 31. 2018, we issued 42,553 shares of our common stock to a charitable organization focused on diabetes research, and related to our Clyra Medical products.

 

All of these offerings and sales were made in reliance on the exemption from registration contained in Section 4(2) of the Securities Exchange Act and/or Regulation D promulgated thereunder as not involving a public offering of securities.

 

ITEM 6. SELECTED FINANCIAL DATA

 

Not applicable

 

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

The following discussion and analysis should be read in conjunction with our audited consolidated financial statements and the related notes to the consolidated financial statements included elsewhere in this report.

 

This discussion contains forward-looking statements that involve risks and uncertainties. Such statements, which include statements concerning future revenue sources and concentration, selling, general and administrative expenses, research and development expenses, capital resources, additional financings and additional losses, are subject to risks and uncertainties, including, but not limited to, those discussed above in Part I, Item 1 and elsewhere in this Annual Report, particularly in “Risk Factors,” that could cause actual results to differ materially from those projected. The forward-looking statements set forth in this Annual Report are as of December 31, 2018 unless expressly stated otherwise, and we undertake no duty to update this information.

 

 

Results of Operations—Comparison of the years ended December 31, 2018 and 2017

 

We operate our business in distinct business segments:

 

●

Odor-No-More, which manufactures and sells our odor and VOC control products and services, including our flagship product, CupriDyne Clean;

 

●

BLEST, our professional engineering services division supporting our internal business units and serving outside clients on a fee for service basis;

 

●

BioLargo Water, our Canadian division that has been historically pure research and development, and is now transitioning to focus on commercializing our AOS system;

 

●

Clyra Medical, our partially owned subsidiary focused on the Advanced Wound Care industry; and

 

●

Our corporate operations, which support the operating segments with legal, accounting, human resources, and other services.

 

We invest cash into each of these segments on a regular basis, as none of the segments yet generates enough cash to fund their operations. However, both Odor-No-More and BLEST are trending towards cash-flow positive, and we expect each of those two segments to begin to generate positive cash for BioLargo in 2019.

 

Annual revenue for the year ended December 31, 2018 was $1,364,000, more than double the revenue of $516,000 in 2017. We generated revenue from two of our operating divisions – Odor-No-More and BLEST. Our business segments obtain cash to support operations in different ways. Odor-No-More and BLEST generate revenues from third parties, and receive funding as needed from their parent corporation, BioLargo. Our Canadian team, BioLargo Water, receives funds from government research grants (reported on our financial statements as “Other income – Grant income”), and receives funding as needed from BioLargo. Clyra Medical, however, relies direct investment from third parties for 100% of its operating costs and is not supported with capital from BioLargo’s corporate budget or fundraising.

 

Odor-No-More

 

Our wholly owned subsidiary Odor-No-More generates revenues through sales of our flagship product CupriDyne Clean, by providing design, installation, and maintenance services on the systems that deliver CupriDyne Clean at its clients’ facilities, and through sales of odor absorption products to the U.S. Government. Although Odor-No-More did not generate a net profit in 2018, its revenues continued to increase throughout the year, and in the fourth quarter of 2018 its net loss was only $68,000 (for the year, its net loss was $433,000).

 

Revenue (Odor-No-More)

 

Odor-No-More’s revenues more than doubled in 2018, to $1,123,000, comprised of $1,016,000 in product sales, and $107,000 in design, installation and maintenance services (including related parts). Of product sales, approximately 50% was generated from sales of CupriDyne Clean products, and approximately one-third from sales to the U.S. military.

 

Sales of our CupriDyne Clean products increased 68% from the prior year, due to the acquisition of more clients and client locations, and the sale and delivery of more products than in years past. Of our CupriDyne Clean sales, approximately two-thirds were made pursuant to “national purchasing agreements” (“NPA”) with the four largest waste handling companies in the United States. We expect our sales to NPA clients to continue to increase in 2019 as we expect to continue to add new service locations for those customers. And, for one such company, we have only recently become fully authorized in their corporate system, opening up potential sales to their more than 1,000 U.S. locations.

 

Sales to the U.S. military are primarily our Specimen Transport Solidifier pouches, and are made to the U.S. Defense Logistics Agency through our distributor Downeast Logistics. These sales increased by almost three-fold in 2018 as compared with 2017. The vast majority of these sales are made through a bid process in response to a request for bids to which any qualified government vendor can respond, and our increased revenue in 2018 is due to an increased volume of sales from the bidding process. We cannot know in advance the frequency or size of such requests from the US Government, or whether our bids will be successful, and as such we are uncertain as to our future revenues through this system.

 

 

Cost of Goods Sold (Odor-No-More)

 

Odor-No-More’s cost of goods sold includes costs of raw materials, contract manufacturing, and portions of salaries and expenses related to the manufacturing of our products. As a percentage of gross sales, Odor-No-More’s costs of goods was 51% in 2018 versus 64% in 2017. In mid-2018, because of higher volumes, Odor-No-More was able to decrease its costs by purchasing raw materials directly from manufacturers at more favorable prices, resulting in the year-to-year cost of goods decrease.

 

Selling, General and Administrative Expense (Odor-No-More)

 

Odor-No-More’s Selling, General and Administrative (“SG&A”) expenses include both cash and non-cash expense related to its operations. Odor-No-More’s SG&A expenses increased to $969,000 in 2018, as compared with $661,000 in 2017, an increase of 47%. These expenses have increased alongside Odor-No-More’s efforts to increase revenues by hiring additional sales and support staff. We expect its SG&A expenses to increase in 2019 as it continues to add sales and support personnel as its number of customers and revenues increase.

 

Net Loss (Odor-No-More)

 

Odor-No-More generated $1,123,000 in revenue, a gross margin of $552,000, and had total costs and expenses of $985,000, resulting in a net loss of $433,000. Odor-No-More is trending toward profitability. Its gross margin from product sales has increased significantly since 2017, and its loss from operations is trending downward:

 

 

We believe these trends will continue. The loss from operations is trending downward for two reasons. First, Odor-No-More was able to reduce its product costs as a result of its increased volume (purchasing power). Second, increased sales resulted in increased gross margin contributing to the company’s operational costs.

 

Because the subsidiary had a net loss, we invested cash into it during the year to allow it to fund its operations. However, this need for cash decreased as 2018 progressed, and in the fourth quarter of 2018, it needed only $51,000 cash (as compared with over $400,000 for the year). We expect that Odor-No-More’s sales will continue to increase, and thus its gross margin will continue to increase. By the end of 2019, we expect that Odor-No-More will no longer require a cash subsidy to operate, but will be contributing cash to our corporate operations.

 

 

BLEST (engineering division)

 

Revenue (BLEST)

 

Our engineering segment (BLEST) generated $241,000 of revenues from third party clients in its first full year of operation, versus only $12,000 in revenue in its first three months of operation in 2017. BLEST’s revenues increased in the latter part of the year, with approximately one-half of its revenues generated during the fourth quarter 2018. Its revenues do not include over $600,000 of work performed on internal BioLargo projects, such as its further engineering and development of the AOS water filtration system. Our engineers are performing a critical role in the AOS pilot projects, some of which are supported by third-party research grants and has been instrumental in developing and supporting a professional engineered design service for misting systems being sold by our Odor-No-More operating unit.

 

Cost of Goods (Services) Sold (BLEST)

 

BLEST’s cost of services includes employee labor as well as subcontracted labor costs. In 2018, its cost of services were 71% of its revenues, versus 66% in 2017. We expect the cost of services to remain stable in 2019.

 

Selling, General and Administrative Expense (BLEST)

 

BLEST’S SG&A expenses include both cash and non-cash expense related to its operations, although because it primarily delivers services to its clients, most of its labor costs are included in its cost of services (for third party clients), and research and development for its work on BioLargo technologies. Because BLEST began operations in the fourth quarter of 2017, and thus its SG&A expenses of $409,000 in 2018 does not have a comparable period in 2017. We expect these expenses to increase only slightly in 2019, as the staff required to increase service to its clients and revenues will be included in cost of services.

 

Net Loss (BLEST)

 

BLEST generated $241,000 in revenue, a gross margin of $69,000, and had total costs and expenses of $991,000, resulting in a net loss of $750,000.

 

While we are unable to record revenues generated from intracompany services by the engineering group to other operating divisions, it is important to note that the net loss would be eliminated if BLEST were an outside contract for hire services company selling services to our water company or our industrial odor and VOC control operating unit.

 

Because the subsidiary had a net loss, we invested cash during the year to allow it to maintain operations. BLEST’s need for a cash subsidy to support its operations decreased considerably towards the end of calendar year 2018. We expect this trend to continue, and expect that in 2019 its sales will continue to increase, and thus its gross profit will continue to increase. By the end of 2019, we expect that it will no longer require a cash subsidy to operate, but will be contributing cash to our corporate operations.

 

Other Income

 

Our wholly owned Canadian subsidiary has been awarded more than 65 research grants over the years from various Canadian public and private agencies, including the Canadian National Research Institute – Industrial Research Assistance Program (NRC-IRAP), the National Science and Engineering Research Council of Canada (NSERC), and the Metropolitan Water District of Southern California’s Innovative Conservation Program “ICP”. The research grants received are considered reimbursement grants related to costs we incur and therefore are included as Other Income. The amount of grant income remained consistent between 2017 and 2018. We continued to win grants and it is important to note that amounts paid directly to third parties are not included as income in our financial statements.

 

Our Canadian subsidiary applied for and received a refund on our income taxes pursuant to the “Scientific Research and Experimental Development (SR&ED) Program”, a Canadian federal tax incentive program designed to encourage Canadian businesses to conduct research and development in Canada. For the year ended December 31, 2017 and 2018, we received $71,000 and $73,000.

 

 

Although we are continuing to apply for government and industry grants, and indications from the various grant agencies is highly encouraging, we cannot be certain of continuing those successes in the future.

 

Selling, General and Administrative Expense – company wide

 

Our SG&A expenses include both cash expenses (for example, salaries to employees) and non-cash expenses (for example, stock option compensation expense). Our SG&A expenses increased by 19% ($834,000) in 2018 to $5,264,000.⁴ Our non-cash expenses (through the issuance of stock and stock options) increased in 2018 compared with 2017 ($2,242,000 compared to $1,564,000) because our employees, vendors and consultants chose to receive a greater number of stock and stock options in lieu of cash owed. The largest components of our SG&A expenses included (in thousands):

 

		Year ended December 31, 2017				Year ended December 31, 2018
Salaries and payroll related		$	1,610			$	1,973
Professional fees			651				800
Consulting			810				839
Office expense			627				987
Board of director expense			306				280
Sales and marketing			224				246
Investor relations			201				139

 

Our salaries and payroll-related and office-related expenses increased in 2018 due to the addition of our engineering subsidiary for the full year of 2018 compared to only three months of 2017. Our professional fees increased in 2018 due to increased needs for legal and accounting as a result of the registration statements filed during 2018, the special stockholder meeting held in September 2018 and other work related to our efforts to list our common stock on a national exchange, and the purchase of the intellectual property of Scion Solutions (see Part I, Item I, “Advanced Wound Care – Clyra Medical,” above). Office expense increased due to the addition our engineering segment in Tennessee. Our investor relations fees decreased in 2018 compared with 2017 due to a reduction in the use of outside investor relation firms during that period. The Company has maintained investor relations support with internal personnel.

 

Research and Development

 

In the year ended December 31, 2018, we spent approximately $1,700,000 in the research and development of our technologies and products. This was a slight increase of 5% ($86,000) over 2017. This number does not include over $300,000 in internal billings from our engineering division’s work on the AOS system.

 

As we transition our Canadian operations from pure research and development towards a focus on commercializing the AOS system, we expect their contribution to our total research and development expenses to decrease in 2019. We expect this to be offset by increased research and development at Clyra Medical, which we expect to be funded entirely from its own resources.

 

Interest expense 

 

Our interest expense for the year ended December 31, 2018 was $3,494,000, a decrease of $366,000 compared with 2017, and of which $54,000 was paid in cash, and the remainder, $3,440,000, is non-cash expense. Our non-cash interest related expenses were comprised primarily as follows: (i) $2,766,000 as one-time, non-cash debt discounts related to warrants issued in conjunction with debt instruments being amortized over the life of the debt instrument (in 2017, it was $3,058,000), and (ii) $524,000 related to interest paid in stock on debt instruments. While we cannot predict our interest expense in 2019, our outstanding debt as of December 31, 2018 was substantially less than as of December 31, 2019, and thus we expect our interest expense in 2019 to decline.

 

---

⁴ This includes all of our operational segments (including Odor-No-More and BLEST discussed above).

 

 

We record the relative fair value of the warrants and the intrinsic value of the beneficial conversion feature sold with the convertible notes payable which typically results in a full discount on the proceeds from the convertible notes. This discount is being amortized as interest expense over the term of the convertible notes. We expect our interest expense to decrease in 2019 because the total amount we amortize (the line item on our balance sheet “Discount on convertible notes payable and line of credit, net of amortization”) decreased by $1,784,000 in 2018 – from $2,107,000 at December 31, 2017, to $323,000 at December 31, 2018. However, any decrease would be offset if we issue new debt instruments in 2019 that are combined with warrants, or if we issue new warrants as consideration to extend maturity dates on existing debt instruments.

 

Net Loss

 

Net loss for the year ended December 31, 2018 was $10,696,000 a loss of $0.09 per share, compared to a net loss for the year ended December 31, 2017 of $9,547,000 a loss of $0.10 per share. Our net loss this year was somewhat offset by an increase in revenue; nevertheless, the net loss increased mainly due to the increase in financing costs, non-cash interest expense to obtain capital, and increased payroll and related office expenses which are primarily associated with the start-up expenses related to our engineering operating unit. The decrease in net loss per share for the year ended December 31, 2018 is primarily attributable to the increase in the number of shares outstanding from 2017 to 2018.

 

The net loss per business segment is as follows (in thousands):

 

Net loss		Year ended December 31, 2017				Year ended December 31, 2018
Odor-No-More		$	(500	)		$	(433	)
BLEST			(90	)			(750	)
Clyra Medical			(915	)			(883	)
BioLargo Water			(741	)			(571	)
Corporate			(7,301	)			(8,059	)
Consolidated net loss		$	(9,547	)		$	(10,696	)

 

 

It is important to note that of the corporate net loss of $8,059,000, interest expense was $3,494,000, of which $3,440,000 was a non-cash expense. R & D was $1,700,000 primarily attributed to the accelerated development of the AOS technology. These two items alone account for $5.2 million in losses of the consolidated loss of $10,696,000 in total losses. With expanding sales, we believe that Odor-No-More and BLEST (engineering) can achieve positive cash flow from operations. However, with the continued development costs associated with Clyra Medical (even though it is financed directly through the sale of stock in Clyra), and with the addition of any ongoing development costs associated with BioLargo Water to be incurred through pre-commercial piloting, we expect to continue to incur a net loss for the foreseeable future. 

 

We have made considerable investments in our water and medical technologies as well as supporting the start-up expenses for our engineering team. We believe those investment will pay off as we now are narrowly focused on commercial sales.

 

Liquidity and Capital Resources

 

The accompanying consolidated financial statements have been prepared on a going concern basis, which contemplates the realization of assets and the settlement of liabilities and commitments in the normal course of our business. For the year ended December 31, 2018, we had a net loss of $10,696,000, used $3,891,000 cash in operations, and at December 31, 2018, we had a working capital deficit of $1,536,000, and current assets of $955,000.  At December 31, 2018, we had convertible debt, promissory notes, and line of credit obligations outstanding with an aggregate principal balance of $3,487,000, an accumulated deficit of $111,723,000, and net stockholders’ deficit of $1,496,000. We do not believe gross profits will be sufficient to fund our current level of operations or pay our debt due prior to December 31, 2019, and thus we believe we will have to raise additional investment capital to both fund our operations and refinance our existing debt.

 

 

We operate our business in five distinct business segments. Each of these segments obtains cash to fund operations in unique ways. Odor-No-More and BLEST generate cash by selling products and services. Clyra Medical obtains cash from third party investments of sales of its common stock. BioLargo Water generates cash through government research grants and tax credits. Our corporate operations generate cash through private offerings of stock, debt instruments, and warrants. In 2018, cash was generated as follows (in thousands):

 

		2017 (year)				2018 (Year)
SOURCES OF INCOME AND CASH
Revenue from operations		$	516			$	1,364
Grant income			140				158
Tax credit income			71				73
Cash investments (to BioLargo)			3,373				2,637
Cash investments (to Clyra)			750				1,005
Total:		$	4,850			$	5,237

 

 

Only two segments (Odor-No-More and BLEST) generated revenues in the year ended December 31, 2018. As such, we provided a cash subsidy to each business segment to allow it to fund its operations. For our two revenue generating divisions, cash needs have decreased as their revenues have increased. In the fourth quarter of 2018, Odor-No-More’s gross margin and cash receipts from clients were such that it needed only $51,000 extra cash from corporate to meet its operational expenses. BLEST similarly increased its revenues such that it needed little cash from corporate during the fourth quarter to maintain it operations. We expect these trends to continue, and expect that at some point in the calendar year 2019 both Odor-No-More and BLEST will be generating profits and contributing cash to corporate operations.

 

In the first quarter of 2019, we shifted focus at our Canadian subsidiary (BioLargo Water) from pure research and development to commercializing the AOS system. In doing so, we reduced our research staff and thus reduced its monthly cash needs by $15,000.

 

Clyra Medical is unique in that it funds its operations through third party investments. We do not intend to subsidize its operations in the future.

 

We used almost four million dollars cash in our total operations in 2018. At December 31, 2018, we had current assets of just less than one million dollars. Thus, to maintain the same level of operations in 2019, and notwithstanding the increasing revenues at Odor-No-More and BLEST, we expect to continue to need to raise investment capital. In 2018, we conducted private securities offerings and received $3,642,000 net proceeds. Since first acquiring the BioLargo technology in the spring of 2007, we have received investment capital of approximately $22,000,000 which we have invested in development and commercialization efforts. We intend to continue to raise money through private securities offerings for the foreseeable future. Although we engaged an investment banking firm and filed a registration statement to raise $7,500,000 in conjunction with an application for listing our common stock on the Nasdaq Capital Markets, no assurance can be made that we will move forward in the near future with that offering or our listing application.  We may reconsider and postpone these efforts as management believes our current market capitalization does not reflect the true value of the Company or recognize the significant business opportunities that lie ahead. Our board intends to evaluate these and other factors, including the anticipated dilution to our stockholders of an offering of the size required to meet the initial and continued listing requirements. No assurance can be made of our success at raising money through private or public offerings, or of our intended listing on a national exchange. 

 

Critical Accounting Policies

 

Our discussion and analysis of our results of operations and liquidity and capital resources are based on our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and disclosure of contingent assets and liabilities. On an ongoing basis, we evaluate our estimates and judgments, including those related to revenue recognition, valuation of offerings of debt with equity or derivative features which include the valuation of the warrant component, any beneficial conversion feature and potential derivative treatment, and share-based payments. We base our estimates on anticipated results and trends and on various other assumptions that we believe are reasonable under the circumstances, including assumptions as to future events. These estimates form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. By their nature, estimates are subject to an inherent degree of uncertainty. Actual results that differ from our estimates could have a significant adverse effect on our operating results and financial position. We believe that the following significant accounting policies and assumptions may involve a higher degree of judgment and complexity than others.

 

The methods, estimates and judgments the Company uses in applying these most critical accounting policies have a significant impact on the results of the Company reports in its financial statements.

 

 

Revenue Recognition

 

We adopted ASU 2014-09, “Revenue from Contracts with Customers”, Topic 606, on January 1, 2018. The guidance focuses on the core principle for revenue recognition. 

 

The core principle of the guidance is that an entity should recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. To achieve that core principle, an entity should apply the following steps:

 

Step 1:   Identify the contract(s) with a customer.

Step 2:   Identify the performance obligations in the contract.

Step 3:   Determine the transaction price.

Step 4:   Allocate the transaction price to the performance obligations in the contract.

Step 5:   Recognize revenue when (or as) the entity satisfies a performance obligation.

 

We have revenue from two subsidiaries, Odor-No-More and BLEST. Odor-No-More identifies its contract with the customer through a written purchase order , in which the details of the contract are defined including the transaction price and method of shipment. The only performance obligation is to create and ship the product and each product has separate pricing. Odor-No-More recognizes revenue at a point in time when the order for its goods are shipped if its agreement with the customer is FOB Odor-No-More’s warehouse facility, and when goods are delivered to its customer if its agreement with the customer is FOB destination. Revenue is recognized with a reduction for sales discounts, as appropriate and negotiated in the customer’s purchase order.

 

BLEST identifies services to be performed in a written contract, which specifies the performance obligations and the rate at which the services will be billed. Each service is separately negotiated and priced. Revenue is recognized as services are performed and completed. BLEST’s contracts typically call for invoicing for time and materials incurred for that contract. To date, there have been no discounts or other financing terms for the contracts.

 

In the future, we may generate revenues from royalties or license fees from our intellectual property. In the event we do so, we anticipate a licensee would pay a license fee in one or more installments and ongoing royalties based on their sales of products incorporating or using our licensed intellectual property. Upon entering into a licensing agreement, we will determine the appropriate method of recognizing the royalty and license fees.

 

Warrants

 

Warrants issued with our convertible and non-convertible debt instruments are accounted for under the fair value and relative fair value method.

 

The warrant is first analyzed per its terms as to whether it has derivative features or not. If the warrant is determined to be a derivative and not qualify for equity treatment, then it is measured at fair value using the Black Scholes option model, and recorded as a liability on the balance sheet. The warrant is re-measured at its then current fair value at each subsequent reporting date (it is “marked-to-market”).

 

If the warrant is determined to not have derivative features, it is recorded into equity at its fair value using the Black Scholes option model, however, limited to a relative fair value based upon the percentage of its fair value to the total fair value including the fair value of the convertible note.

 

Convertible debt instruments are  recorded at fair value, limited to a relative fair value based upon the percentage of its fair value to the total fair value including the fair value of the warrant. Further, the convertible debt instrument is examined for any intrinsic beneficial conversion feature (“BCF”) of which the conversion price is less than the closing common stock price on date of issuance. If the relative fair value method is used to value the convertible debt instrument and there is an intrinsic BCF, a further analysis is undertaken of the BCF using an effective conversion price which assumes the conversion price is the relative fair value divided by the number of shares the convertible debt is converted into by its terms. The BCF value is accounted for as equity.

 

The warrant and BCF relative fair values are also recorded as a discount to the convertible promissory notes. As present, these equity features of the convertible promissory notes have recorded a discount to the convertible notes that is substantially equal to the proceeds received.

 

Share-based Payments

 

It is the Company’s policy to expense share-based payments as of the date of grant or over the term of the vesting period in accordance with Auditing Standards Codification Topic 718 “Share-Based Payment.” Application of this pronouncement requires significant judgment regarding the assumptions used in the selected option pricing model, including stock price volatility and employee exercise behavior. Most of these inputs are either highly dependent on the current economic environment at the date of grant or forward-looking expectations projected over the expected term of the award.

 

 

 

Fair Value Measurement

 

Generally accepted accounting principles establishes a hierarchy to prioritize the inputs of valuation techniques used to measure fair value. The hierarchy gives the highest ranking to the fair values determined by using unadjusted quoted prices in active markets for identical assets (Level 1) and the lowest ranking to fair values determined using methodologies and models with unobservable inputs (Level 3). Observable inputs are those that market participants would use in pricing the assets based on market data obtained from sources independent of the Company. Unobservable inputs reflect the Company’s assumptions about inputs market participants would use in pricing the asset or liability developed based on the best information available in the circumstances. The Company has determined the appropriate level of the hierarchy and applied it to its financial assets and liabilities.

 

Management believes the carrying amounts of the Company’s financial instruments as of December 31, 2017 and 2018 approximate their respective fair values because of the short-term nature of these instruments. Such instruments consist of cash, accounts receivable, prepaid assets, accounts payable, convertible notes, and other assets and liabilities.

 

Recent Accounting Pronouncements

 

See Note 2 to the Consolidated Financial Statements, “Summary of Significant Accounting Policies – Recent Accounting Pronouncements”, for the applicable accounting pronouncements affecting the Company.

 

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURE ABOUT MARKET RISK

 

Not applicable.

 

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

 

Our consolidated financial statements as of and for the years ended December 31, 2018 and 2017 are presented in a separate section of this report following Item 14 and begin with the index on page F-1.

 

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

 

None.

 

ITEM 9A. CONTROLS AND PROCEDURES

 

Evaluation of Disclosure Controls and Procedures

 

We conducted an evaluation, under the supervision and with the participation of management, including our chief executive officer and chief financial officer, of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended) as of the end of the period covered by this Annual Report.

 

Our procedures have been designed to ensure that the information relating to our company, including our consolidated subsidiaries, required to be disclosed in our SEC reports is recorded, processed, summarized and reported within the time periods specified in SEC rules and forms, and is accumulated and communicated to our management, including our chief executive officer and chief financial officer, as appropriate to allow for timely decisions regarding required disclosure. However, our Company is continuing to grow and evolve. In 2017, we added an engineering division operating in Tennessee. The volume of our product sales continues to grow, increasing strain on our accounting systems. And, our operations do not yet generate enough cash to fund operations, and thus we rely on financing activities to maintain our level of operations and fund our anticipated growth. In combination, these activities put stress on our overall controls and procedures. Based on this evaluation, our chief executive officer and chief financial officer concluded that as of the evaluation date our disclosure controls and procedures were not effective, due to the material weakness identified below.

 

It should be noted that the design of any system of controls is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions, regardless of how remote.

 

 

Management’s Report on Internal Control over Financial Reporting

 

Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f). Our internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures are being made only in accordance with authorizations of management and directors; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of our assets that could have a material effect on the financial statements.

 

Under the supervision and with the participation of our management, including our chief executive officer and the chief financial officer, we have established internal control procedures in accordance with the guidelines established in the 2013 Framework —Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). Recognizing the dynamic nature and growth of the Company’s business in the year ended December 31, 2018, including the addition of an engineering division in late 2017, growth of the core operations, and the increase in the number of employees, management has recognized the strain on the overall internal control environment. As a result, management has concluded that its internal controls over financial reporting are not effective. Management identified a material weakness with respect to deficiencies in its financial closing and reporting procedures. Management believes this is due to a lack of resources. Management intends to add accounting personnel and operating staff and more sophisticated systems in order to improve its reporting procedures and internal controls, subject to available capital. A material weakness is a significant deficiency, or combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of the annual or interim financial statements will not be prevented or detected.

 

This Annual Report does not include an attestation report of the Company’s independent registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by the Company’s independent registered public accounting firm pursuant to rules of the SEC that permit the Company to provide only management’s report in this Annual Report.

 

Our management, including our chief executive officer and chief financial officer, does not expect that our disclosure controls or our internal control over financial reporting, or any system we design or implement in the future, will prevent or detect all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. The design of any system of controls is based in part on certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions.

 

ITEM 9B. OTHER INFORMATION

 

None.

 

 

PART III

 

Certain information required by Part III is incorporated by reference from our Proxy Statement to be filed with the SEC in connection with the solicitation of proxies for our 2019 Annual Meeting of Stockholders, currently scheduled to be held on July 23, 2019 (the “Proxy Statement”).

 

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS, AND CORPORATE GOVERNANCE

 

The information required by this section is incorporated by reference from the section entitled “Proposal 1—Election of Directors” in the Proxy Statement. Item 405 of Regulation S-K calls for disclosure of any known late filing or failure by an insider to file a report required by Section 16 of the Exchange Act. This disclosure is incorporated by reference to the section entitled “Section 16(a) Beneficial Ownership Reporting Compliance” in the Proxy Statement. The information required by this Item with respect to our executive officers is contained in Item 1 of Part I of this Annual Report under the heading “Business—Executive Officers”.

 

ITEM 11. EXECUTIVE COMPENSATION

 

The information required by this section is incorporated by reference from the information in the section entitled “Executive Compensation” in the Proxy Statement.

 

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

 

The information required by this section is incorporated by reference from the information in the section entitled “Security Ownership of Certain Beneficial Owners and Management” in the Proxy Statement.

 

ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

 

The information required by this section is incorporated by reference from the information in the section entitled “Certain Relationships and Related Transactions” in the Proxy Statement.

 

ITEM 14. PRINCIPAL ACCOUNTING FEES AND SERVICES

 

The information required by this section is incorporated by reference from the information in the section entitled “Ratification of Appointment of Independent Auditor” in the Proxy Statement.

 

 

PART IV

 

 

 

ITEM 15.  EXHIBITS AND FINANCIAL STATEMENT SCHEDULES.

 

The following documents are filed as a part of this report:

 

1. Financial Statements. The consolidated financial statements required to be filed in this report are listed on the Index to Financial Statements immediately preceding the financial statements.

 

2. Financial Statement Schedules. Separate financial statement schedules have been omitted either because they are not applicable or because the required information is included in the consolidated financial statements or the notes thereto.

 

3. Exhibits. See the Exhibit  Index for a list of the exhibits being filed or furnished with or incorporated by reference into this report.

 

 

		Incorporated by Reference Herein
Exhibit Number	Exhibit Description	Form	File Date
3.1	Bylaws of BioLargo, Inc., as amended and restated	Form 10-KSB	5/23/2003
3.2	Amended and Restated Certificate of Incorporation for BioLargo, Inc. filed March 16, 2007	Form 10-KSB	5/4/2007
3.3	Amended and Restated Articles of Incorporation of Clyra Medical Technologies, Inc.	Form 8-K	1/6/2016
3.4	Certificate of Amendment to Certificate of Incorporation, filed May 25, 2018	Pos Am	6/22/2018
4.1	Form of Convertible Promissory Note issued in 2015 Unit Offering	Form 10-K	3/31/2015
4.2	Form of Series A Stock Purchase Warrant issued in 2015 Unit Offering	Form 10-K	3/31/2015
4.3	Form of Stock Options issued in exchange for reduction in accounts payable.	Form 10-K	3/31/2015
4.4	BioLargo, Inc. Investors’ Rights Agreement dated December 30, 2015, as a shareholder of Clyra Medical Technologies, Inc.	Form 8-K	1/6/2016
4.5	Stock purchase warrant issued with Line of Credit in June 2016	Form 10-Q	8/15/2016
4.6	Form of Note issued to One Year Note holder dated December 30, 2016	Form S-1	1/25/2017
4.7	Form of Warrant issued to One Year Note holder dated December 30, 2016	Form S-1	1/25/2017
4.8	Option to purchase common stock issued to Dennis P. Calvert dated May 2, 2017	Form 8-K	5/4/2017
4.9	Form of Note issued in Summer 2017 Offering	Form 10-Q	8/14/2017
4.10	Form of Warrant issued in Summer 2017 Offering	Form 10-Q	8/14/2017
4.11	Form of One-Year Note issued July 2017	Form 10-Q	8/14/2017
4.12	Form of Warrant issued to One-Year Noteholder July 2017	Form 10-Q	8/14/2017
4.13	$440,000 convertible note, matures July 20, 2019	Form 10-Q	8/14/2017
4.14	Purchase Agreement, dated as of August 25, 2017 by and between BioLargo, Inc. and Lincoln Park Capital Fund, LLC	Form 8-K	8/31/2017
4.15	Securities Purchase Agreement, dated as of December 14, 2017 by and between BioLargo, Inc. and Vista Capital Investments, LLC.	Form 8-K	12/22/2017
4.16	Registration Rights Agreement, dated as of December 14, 2017, by and between BioLargo, Inc. and Vista Capital Investments, LLC.	Form 8-K	12/22/2017

 

 

4.17	Convertible Promissory Note issued to Vista Capital Investments LLC dated December 14, 2017	Form 8-K	12/22/2017
4.18	December 18, 2017, amendment to Promissory Note dated December 14, 2017 issued to Vista Capital Investments, LLC.	Form 8-K	12/22/2017
4.19	Stock Option dated December 31, 2017, issued to Chief Financial Officer Charles K. Dargan II	Form 8-K	1/3/2018
4.20	Promissory Note dated January 16, 2018, by and between BioLargo, Inc. and FirstFire Global Opportunity Fund, LLC.	S-1	1/17/2018
4.21	Line of credit, matures September 1, 2019	Form 10-Q	5/14/2018
4.22	Warrant issued with Line of credit that matures September 1, 2019	Form 10-Q	5/14/2018
4.23	$50,000 convertible note, matures March 8, 2020	Form 10-Q	5/14/2018
4.24	Form of convertible notes that mature April 20, 2021 (Spring 2018 Offering)	Form 10-Q	5/14/2018
4.25	Form of warrant issued with convertible notes that mature April 20, 2021 (Spring 2018 Offering)	Form 10-Q	5/14/2018
4.26	Amendment to $440,000 convertible notes that matures July 20, 2019	Form 10-Q	5/14/2018
4.27	2018 Equity Incentive Plan	Form S-8	6/22/2018
4.28	Notice of Restricted Stock Unit Award under 2018 Equity Incentive Plan	Form S-8	6/22/2018
4.29	Restricted Stock Unit Award Agreement under 2018 Equity Incentive Plan	Form S-8	6/22/2018
4.30	Notice of Stock Option Grant under 2018 Equity Incentive Plan	Form S-8	6/22/2018
4.31	Stock Option Award Agreement under 2018 Equity Incentive Plan	Form S-8	6/22/2018
4.32	September 2018 Amendment to Promissory Note dated December 14, 2017 issued to Vista Capital Investments, LLC.	Form 8-K	9/18/2018
4.33	Stock Purchase Warrant issued to Vista Capital Investments dated September 12, 2018.	Form 8-K	9/18/2018
4.34	Promissory Note issued to Vernal Bay Investments, LLC on September 19, 2018	Form 8-K	9/24/2018
4.35	Stock Purchase Warrant issued to Vernal Bay Investments, LLC on September 19, 2018	Form 8-K	9/24/2018
4.36	Promissory Note issued to Chappy Bean, LLC on September 19, 2018	Form 8-K	9/24/2018
4.37	Stock Purchase Warrant issued to Chappy Bean, LLC on September 19, 2018	Form 8-K	9/24/2018
4.38	Stock Purchase Agreement and Plan of Reorganization dated September 26, 2018, with Scion Solutions, LLC	Form 8-K	10/2/2018
4.39	Promissory note issued by Clyra Medical Technologies dated September 26, 2018	Form 8-K	10/2/2018
4.40	Triton Funds LP Securities Purchase Agreement	Form 8-K	10/22/2018
4.41	Convertible Promissory Note issued to Triton Funds LP dated October 12, 2018	Form 8-K	10/22/2018
4.42	Stock Purchase Warrant issued to Triton Funds LP	Form 8-K	10/22/2018

 

 

4.43	January 2019 Amendment to Promissory Note dated December 14, 2017, by and between BioLargo, Inc. and Vista Capital Investments, LLC.	Form 8-K	1/11/2019
4.44	Convertible Promissory Note issued to Vista Capital Investments LLC dated January 7, 2019	Form 8-K	1/11/2019
4.45	Convertible Promissory Note issued to Tangiers Global, LLC dated January 31, 2019	Form 8-K	2/11/2019
4.46	Stock Purchase Warrant Issued to Lincoln Park Capital on January 31, 2019	Form 8-K	2/11/2019
4.47	Amendment dated March 5, 2019 to Convertible Promissory Note issued to Tangiers Global, LLC dated January 31, 2019	Form 8-K	3/8/2019
4.48	Amendment dated March 5, 2019 to Promissory Note issued to Vernal Bay Investments, LLC on September 19, 2018	Form 8-K	3/8/2019
4.49	Amendment dated March 5, 2019 to Promissory Note issued to Chappy Bean, LLC on September 19, 2018	Form 8-K	3/8/2019
10.1†	Engagement Agreement dated February 1, 2008 between BioLargo, Inc. and Charles K. Dargan, II	Form 8-K	2/4/2008
10.2	License Agreement between Clyra Medical Technologies, Inc., dated December 17, 2012	Form 8-K	1/6/2016
10.3	December 30, 2015 amendment to License Agreement with Clyra Medical Technologies, Inc.	Form 8-K	1/6/2016
10.4	Consulting Agreement dated December 30, 2015 with Beach House Consulting LLC	Form 8-K	1/6/2016
10.5	Commercial Office Lease Agreement for 14921 Chestnut St., Westminster, CA 92683	Form 8-K	8/24/2016
10.6†	Employment Agreement with Dennis P. Calvert dated May 2, 2017.	Form 8-K	5/4/2017
10.7†	Lock-Up Agreement with Dennis P. Calvert dated April 30, 2017	Form 8-K	5/4/2017
10.8†	Lock-Up Agreement with Dennis P. Calvert dated May 2, 2017.	Form 8-K	5/4/2017
10.9	Commercial Office Lease Agreement for Oak Ridge Tennessee	Form 8-K	9/8/2017
10.10	Form of Employment Agreement for Engineering Subsidiary	Form 8-K	9/8/2017
10.11	Form of Option issued to founding employees of Engineering subsidiary (BLEST)	Form 8-K	9/8/2017
10.12†	Engagement Agreement extension dated December 31, 2017, between BioLargo, Inc. and Charles K. Dargan, II	Form 8-K	1/3/2018
10.13	Escrow Agreement dated September 26, 2018 regarding Clyra/Scion transaction	Form 8-K	10/2/2018
10.14	Closing Agreement dated December 17, 2018 between Clyra Medical and Scion Solutions	Form 8-K	12/19/2018
10.15†	January 16, 2019 Engagement Extension Agreement by and between BioLargo, Inc. and Charles K. Dargan	Form 8-K	1/18/2019
21.1*	List of Subsidiaries of the Registrant
23.1*	Consent of Haskell & White LLP
31.1*	Certification of Chief Executive Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 and Rules 13(a)-14 and 15(d)-14 under the Securities Exchange Act of 1934
31.2*	Certification of Chief Financial Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 and Rules 13(a)-14 and 15(d)-14 under the Securities Exchange Act of 1934
32*	Certification of Chief Executive Officer and Chief Financial Officer Pursuant to 18 U.S.C. Section 1350.
101.INS**	XBRL Instance
101.SCH**	XBRL Taxonomy Extension Schema
101.CAL**	XBRL Taxonomy Extension Calculation
101.DEF**	XBRL Taxonomy Extension Definition
101.LAB**	XBRL Taxonomy Extension Labels
101.PRE**	XBRL Taxonomy Extension Presentation

 

* Filed herewith

 

** Furnished herewith

 

† Management contract or compensatory plan, contract or arrangement

 

 

SIGNATURES

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Company has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

						BIOLARGO, INC.
Date: March 29, 2019						By:		/s/ Dennis P. Calvert
								Dennis P. Calvert President and Chief Executive Officer

 

 

POWER OF ATTORNEY

 

KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints, jointly and severally, Dennis P. Calvert and Joseph L. Provenzano, and each of them, as his or her true and lawful attorneys-in-fact and agents, with full power of substitution and resubstitution, for him or her and in his or her name, place and stead, in any and all capacities, to sign any and all amendments to this Annual Report on Form 10-K, and to file the same, with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents, and each of them, full power and authority to do and perform each and every act and thing requisite and necessary to be done in connection therewith, as fully to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, or any of them, or their or his or her substitute or substitutes, may lawfully do or cause to be done by virtue hereof.

 

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Company and in the capacities and on the date indicated:

 

Name		Title		Date
/s/ Dennis P. Calvert		Chairman of the Board, Chief		March 29, 2019
Dennis P. Calvert		Executive Officer and President
/s/ Charles K. Dargan II		Chief Financial Officer		March 29, 2019
Charles K. Dargan II		(principal financial officer and principal accounting officer)
/s/ Kenneth R. Code		Chief Science Officer and Director		March 29, 2019
Kenneth R. Code
/s/ Joseph L. Provenzano		Executive Vice President, Corporate Secretary and		March 29, 2019
Joseph L. Provenzano		Director
/s/ Jack B. Strommen		Director		March 29, 2019
Jack B. Strommen
/s/ Dennis E. Marshall		Director		March 29, 2019
Dennis E. Marshall

 

/s/ Kent C. Roberts II		Director		March 29, 2019
Kent C. Roberts II
/s/John S. Runyan		Director		March 29, 2019
John S. Runyan

 

 

INDEX TO FINANCIAL STATEMENTS

Report of Independent Registered Public Accounting Firm	F-2
Consolidated Balance Sheets as of December 31, 2017 and December 31, 2018	F-3
Consolidated Statements of Operations and Comprehensive Loss for the years ended December 31, 2017 and 2018	F-4
Consolidated Statements of Stockholders’ Equity (Deficit) for the years ended December 31, 2017 and 2018	F-5
Consolidated Statements of Cash Flows for the years ended December 31, 2017 and 2018	F-6
Notes to Consolidated Financial Statements	F-7 – F-35

 

 

Report of Independent Registered Public Accounting Firm

 

 

To the Board of Directors and Stockholders

BioLargo, Inc. and Subsidiaries

 

Opinion on the Financial Statements

 

We have audited the accompanying consolidated balance sheets of BioLargo, Inc. and Subsidiaries (the “Company”) as of December 31, 2017 and 2018, and the related consolidated statements of operations, stockholders’ equity (deficit), and cash flows for each of the two years in the period ended December 31, 2018, and the related notes (collectively referred to as the “consolidated financial statements”).  In our opinion, the consolidated financial statements present fairly, in all material respects, the consolidated financial position of the Company as of December 31, 2017 and 2018, and the consolidated results of its operations and its cash flows for each of the two years in the period ended December 31, 2018, in conformity with accounting principles generally accepted in the United States of America.

  

Going Concern

 

The accompanying consolidated financial statements have been prepared assuming that the Company will continue as a going concern.  As discussed in Note 1 to the consolidated financial statements, the Company has experienced recurring losses, negative cash flows from operations, has limited capital resources, a net stockholders’ deficit, and significant debt obligations coming due in the near term.  These matters raise substantial doubt about the Company’s ability to continue as a going concern.  Management’s plans in regard to these matters are also described in Note 1. The consolidated financial statements do not include any adjustments that might result from the outcome of this uncertainty.

 

Basis for Opinion

 

These consolidated financial statements are the responsibility of the Company’s management.  Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

 

We conducted our audits in accordance with the standards of the PCAOB.  Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud.  The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits, we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

 

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures include examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

 

 

                                                                                 /s/ HASKELL & WHITE LLP

 

We have served as the Company’s auditor since 2011.

 

Irvine, California

March 29, 2019

 

 

BIOLARGO, INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

AS OF DECEMBER 31, 2017 AND DECEMBER 31, 2018

(in thousands, except for per share data)

---

---

See accompanying notes to consolidated financial statements and report of Independent Registered Public Accounting Firm.

 

 

BIOLARGO, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE LOSS

FOR THE YEARS ENDED DECEMBER 31, 2017 AND 2018

(in thousands, except for per share data)

---

---

See accompanying notes to consolidated financial statements and report of Independent Registered Public Accounting Firm.

 

 

BIOLARGO, INC. AND SUBSIDIARIES 

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY (DEFICIT)
FOR THE YEARS ENDED DECEMBER 31, 2017 AND 2018

(in thousands, except for share data)

---

 

See accompanying notes to consolidated financial statements and report of Independent Registered Public Accounting Firm.

 

 

BIOLARGO, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS
FOR THE YEARS ENDED DECEMBER 31, 2017 AND 2018

(in thousands, except for per share data)

---

---

See accompanying notes to consolidated financial statements and report of Independent Registered Public Accounting Firm