UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

---

FORM 10-K

---

☒ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended July 31, 2015 

or

◻TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from              to              

Commission file No. 001-14468

---

PURE Bioscience, Inc.

(Exact name of registrant as specified in charter)

---

 

 

1725 Gillespie Way

El Cajon, California 92020

(Address of principal executive office, including zip code)

(619) 596-8600

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

None

Securities registered pursuant to Section 12(g) of the Act:

Common Stock, $0.01 par value

---

Indicate by check mark whether the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.     Yes    ◻  No    ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.    Yes  ◻    No  ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☒    No  ◻

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ☒    No  ◻ 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ☒

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company (as defined in Rule 12b-2 of the Act). See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  ◻    No  ☒

The aggregate market value of the registrant’s voting stock held by non-affiliates, as of the last day of the registrant’s second quarter, was approximately $24,536,000 (computed on the basis of the closing price of the common stock on the OTCQB Bulletin Board on January 31, 2015).

As of October 28, 2015, there were 55,192,630 shares of the registrant’s common stock, $0.01 par value per share, outstanding.

Other Information

As used in this Annual Report on Form 10-K, the terms “we,” “us,” “our,” “PURE” and the “Company” refer to PURE Bioscience, Inc., a Delaware corporation, and its subsidiary, on a consolidated basis, unless otherwise stated.

 

 

 

TABLE OF CONTENTS

 

 

 

 

 

CAUTIONARY STATEMENT REGARDING FORWARD LOOKING STATEMENTS

Certain statements in this Annual Report on Form 10-K may constitute “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, or the Securities Act, and Section 21E of the Securities Exchange Act of 1934, or the Exchange Act. Forward-looking statements are based upon our current assumptions, expectations and beliefs concerning future developments and their potential effect on our business. In some cases, you can identify forward-looking statements by words such as “if,” “shall,” “may,” “might,” “will likely result,” “should,” “expect,” “plan,” “anticipate,” “believe,” “estimate,” “project,” “intend,” “goal,” “objective,” “predict,” “potential” or “continue,” or the negative of these terms and other comparable terminology, although the absence of these words does not necessarily mean that a statement is not forward-looking. Additionally, statements concerning future matters such as our business strategy, development of new products, sales levels, expense levels, cash flows, future commercial and financing matters, future partnering opportunities and other statements regarding matters that are not historical are forward-looking statements.

Although the forward-looking statements in this Annual Report reflect our good faith judgment, based on currently available information, they involve known and unknown risks, uncertainties and other factors that may cause our actual results, levels of activity, performance, or achievements to be materially different from any future results, levels of activity, performance, or achievements expressed or implied by these forward-looking statements. Factors that might cause or contribute to such differences include, but are not limited to, those discussed in the “Risk Factors” contained in Part I, Item 1A of this Annual Report. As a result of these factors, we cannot assure you that the forward-looking statements in this Annual Report on Form 10-K will prove to be accurate. Except as required by law, we undertake no obligation to update publicly any forward-looking statements for any reason after the date we file this Annual Report with the Securities and Exchange Commission, or to conform these statements to actual results or to changes in our expectations. You should, however, review the factors and risks we describe in the reports we will file from time to time with the Securities and Exchange Commission after the date we file this Annual Report. Readers are urged to carefully review and consider the various disclosures made in this Annual Report.

 

PART I

Item 1.  Business

Overview

We are focused on developing and commercializing proprietary antimicrobial products that provide safe and cost-effective solutions to the health and environmental challenges of pathogen and hygienic control.  Our technology platform is based on patented stabilized ionic silver, and our initial products contain silver dihydrogen citrate, or SDC.  SDC is a broad-spectrum, non-toxic antimicrobial agent, which offers 24-hour residual protection and formulates well with other compounds. As a platform technology, we believe SDC is distinguished from existing products in the marketplace because of its superior efficacy, reduced toxicity and the inability of bacteria to form a resistance to it.

Our SDC-based technology platform has potential application in a number of industries.  Our near-term focus is on offering products that address food safety risks across the food industry supply chain. In 2011, the Centers for Disease Control and Prevention (CDC) reported that foodborne illnesses affect more than 48  million people annually in the U.S., causing 128,000 hospitalizations and 3,000 fatalities. The CDC estimated that more than 9 million of these foodborne illnesses were attributed to major pathogens.  The CDC reported that contaminated produce was responsible for approximately 46% of the foodborne illnesses caused by pathogens and 23% of the foodborne illness-related deaths in the US between 1998 and 2008.  Among the top pathogens contributing to foodborne illness in the U.S. are Norovirus, Salmonella,  Campylobacter,  Staphylococcus, Shiga toxin–producing Escherichia coli and Listeria.  Salmonella is the leading cause of hospitalization, followed by Norovirus, and is the leading cause of deaths related to foodborne illness. 

Based on these statistics, we believe there is a significant market opportunity for our safe, non-toxic and effective SDC-based solutions.  We currently offer PURE® Hard Surface as a food contact surface sanitizer and disinfectant to restaurant chains and food processors.  One of our customers is SUBWAY® Restaurants, which has approved PURE Hard Surface for use system-wide (27,000 U.S. stores).  We also intend to offer PURE Control® as a  direct food contact processing aid upon our receipt of the required approvals from the FDA and USDA.  We anticipate receiving the required approvals to market PURE Control as a direct food contact processing aid for raw poultry and fresh produce during the first calendar quarter of 2016.  We are currently testing and continuing development of PURE Control to allow us to seek regulatory approval to utilize PURE Control as a direct food contact processing aid for raw meats, including beef and pork.  In addition to our direct sales efforts with PURE Hard Surface and PURE Control, we market and sell our SDC-based products indirectly through third-party distributors. 

Technology Platform

The foundation of our technology platform is a proprietary electrochemical process that allows us to generate ionized silver in the presence of organic acid.  This process creates a solution containing stabilized ionic silver that can function as an antimicrobial.  Our current products all contain SDC, which we produce by ionizing silver in citric acid.  SDC is a natural, non-toxic, non-caustic, colorless, odorless antimicrobial agent, which offers 24-hour residual protection, and that formulates well with other compounds.  We have also produced ionic silver-based molecular entities using other organic acids, and we believe these compounds may provide a platform for future product development.

Silver as an Antimicrobial

The use of silver as an antimicrobial dates back to ancient times when water, wine and other beverages were kept in silver vessels to maintain freshness. Ancient Egyptians applied thin strips of beaten silver around wounds to avoid infection, and early royalty ate from silver plates and with silver utensils to stay healthy. In the past half-century, silver in colloidal and ionic forms has been used successfully in a wide array of antimicrobial applications, including water purification and topical treatments for burn victims. Silver must be in an ionic form to be effective at killing microorganisms. The short shelf-life of previous ionic silver solutions has limited the development of ionic-silver based antimicrobials. SDC, as a stabilized silver ion complex, has a shelf life of more than a decade because the weak bond of the silver ion to the citric acid allows the ion to remain stable in solution while at the same time making it bioavailable for antimicrobial action.

 

Mechanisms of Action

The rapid and broad-spectrum efficacy of SDC is attributed to its dual mechanisms of action, both with respect to killing bacteria and other microorganisms and acting against viruses.  SDC can kill microorganisms at both the extracellular and intracellular levels.  SDC attracts bacteria because the citric acid is recognized by the organism as a food source. SDC easily enters the microorganism through membrane transport proteins. Once inside the organism, SDC binds to DNA and intracellular proteins causing irreversible damage to the DNA and protein structure. Metabolic and reproductive functions halt, and the organism dies. SDC can also act on an organism’s outer membrane. Silver ions are highly attracted to sulfur-containing thiol groups found in metabolic and structural proteins bound to the membrane surface. SDC targets these critical proteins and destroys their structure. This disruption of the organism’s membrane function and integrity leads to its death.  

Viruses are much smaller than bacteria and present fewer target sites on which a biocide can act. The efficacy of SDC against enveloped and non-enveloped viruses comes from its ability to destroy not only the viral envelope, preventing the virus from attaching to a host cell, but also the infectious component of the virus, the nucleic acid.

Safety Profile

Research has shown that silver is an effective antimicrobial and not toxic to humans at the residual levels following the use of our SDC-based products. In addition, our data shows the components of SDC, ionic silver and citric acid, to be non-toxic, particularly at the low concentrations required to eliminate microorganisms. At higher concentrations, citric acid can be an eye irritant. We have tested a concentrated SDC formulation using standard protocols to measure acute toxicity.  Acute oral and dermal toxicity was not observed at doses up to and including 5000 mg/kg.  Data from eye and skin studies showed only slight irritation and no dermal sensitization.

GRAS Status as Contact Biocide

A committee of independent experts critically reviewed efficacy and toxicity data for SDC and the SDC-based PURE Hard Surface disinfectant and food contact surface sanitizer. The committee found no evidence that SDC demonstrates a hazard to the public when used as a contact biocide on food contact surfaces and food-use utensils. The committee, therefore, concluded such use to be generally recognized as safe, consistent with the EPA registration (discussed below), allowing for use on food manufacturing and processing equipment and food preparation surfaces.

Efficacy

Formulations containing SDC provide complete, quick and broad-spectrum antimicrobial efficacy against gram positive and gram negative bacteria, enveloped and non-enveloped viruses, and fungi. In addition to quick kill times, SDC provides residual antimicrobial activity. SDC also provides rapid kill times against multiple drug resistant bacteria, including Methicillin-resistant Staphylococcus aureus, or MRSA, Vancomycin resistant Enterococcus faecium, or VRE, Carbapenem resistant Escherichia coli, Carbapenem resistant Klebsiella pneumoniae and Carbapenem resistant Klebsiella pneumoniae, NDM-1+. See “EPA Registrations” below for more detailed efficacy data.

Natural and Environmentally Responsible

SDC is made of simple and all-natural ingredients: water, citric acid and minute amounts of ionic silver. SDC does not present a threat to the environment. If introduced to water systems, the low concentrations of ionic silver in SDC would react with naturally present substances such as chlorides, sulfides and organic matter. These reactions would create insoluble silver complexes and render the silver inert. In addition, we manufacture SDC through a “zero waste” process in which no byproducts or environmental effluent are created.

Market Opportunity

U.S. Incidence and Cost of Foodborne Illness

According to an Ohio State University study published in the Journal of Food Protection, completed by Dr. Scharff, a consumer science professor, foodborne illness poses a $77.7 billion economic burden in the United States annually. This cost estimate includes health related costs associated medical costs, productivity losses, mortality, and pain and suffering. The study noted that excluding the estimated costs for pain and suffering,  health related costs exceeded $51

billion. The study does not include costs to the food industry, including reduced consumer confidence, reduced brand value, product recall costs, and litigation, nor does it include the cost to public health agencies (local, state and federal) that are required to respond to illnesses and outbreaks. In addition, the study cited Salmonella as the most costly pathogen with an economic burden estimated to be in excess of $11 billion. This is primarily due to its high incidence and mortality rate.

Increased Regulatory Requirements in the U.S.

The increasing trend of reported foodborne illness over the last decade has resulted in heightened awareness by various government agencies, national media and social media outlets thereby affecting consumer confidence and elevating federal and state regulatory scrutiny.

In 2011, the Food Safety Modernization Act was passed by the U.S. Congress, resulting in increased regulatory requirements for preventive controls, verification and validation of food safety plans by food processors. Additionally, in December 2013 the Food Safety and Inspection Service (FSIS) of the USDA, announced its Salmonella Action Plan (SAP), which is focused on identifying solutions to reduce the incidence of Salmonella in meat and poultry. We believe that the implementation of the SAP will increase the need for new, effective interventions to assist in reducing the incidence of Salmonella in meat and poultry.

Limitations of Existing Food Safety Solutions

The statistics of the U.S. public health problems attributed to pathogens in the food supply chain demonstrate the increasing need for more effective, efficient and safer interventions.  The U.S. food industry continues to use toxic chemicals as processing aids or interventions during food processing operations for which pathogens are becoming increasingly resistant and rendering current interventions less efficacious. Most of these chemicals carry various warning labels for their toxicity characteristics and negatively affect safety of processing plant personnel, plant operating equipment and the plant environment and its surroundings.

Among the chemicals in current use are: peracetic acid, acidified sodium chlorite (ASC), ozone, trisodium phosphate, cetylpyridinium chloride (CPC), organic acid rinses (lactic acid), hypobromous acid and chlorine dioxide. Some of these chemicals can be difficult to work with as a processing aid as they may require heating to become effective or are difficult to mix and stabilize prior to use. Certain of these chemicals are only specific for processing aid use to treat against specific pathogens on only certain foods. In addition, some of these chemicals can produce noxious fumes that over time have been linked to upper respiratory illness and typically require in-plant decontamination of their effluence.

Several large and established corporations currently supply these chemicals. They may also provide other related food safety services such as environmental sanitation programs and food safety consultation and audit services.

Our SDC-Based Products as a Food Safety Solution

Based on the limitations of the existing food safety solutions, we believe that our SDC-based products, including PURE Hard Surface and PURE Control, are well positioned as new and disruptive solutions for the food safety industry. Given their broad spectrum antimicrobial efficacy and non-toxic properties, our SDC-based products provide significant improvements over current chemical interventions that can both strengthen our customers’ food safety practices and help them control and eliminate pathogens present during their food processing operations.

Studies indicate that our SDC-based products are more effective in reducing or eliminating pathogens than existing chemical interventions.  Pilot poultry processing studies showed that SDC achieved an average reduction in Salmonella of 2.75 log ₁₀ CFU/cm  2 when applied as an OLR spray and 6.28 log₁₀ CFU/cm2 when combined with an immersion chilling process simulating current U.S. industry practices. This data suggests that the use of SDC in poultry processing has the potential to achieve non-detectable Salmonella levels.  Similarly, pilot produce processing studies showed that SDC achieved average reductions up to 2.36 log₁₀ CFU/cm2 when applied alone as a spray and up to 3.10 log₁₀ CFU/cm2 when combined with chlorine wash, simulating current processing practices. Currently, produce processors hope to achieve only a 1 log₁₀ CFU/cm2 reduction per intervention treatment. This data suggests that by incorporating SDC, produce processors can improve their results 100-fold with only one step. Moreover, sensory evaluations of both poultry

and produce treated with SDC indicated no difference in color, appearance or odor to untreated controls.  Additionally, SDC had no effect on the nutritional composition of either poultry or produce.

In addition to providing better efficacy, our SDC-based products can provide users with the following benefits compared to the current processing chemicals they are using: 

Based on their performance and characteristics, we believe our SDC-based products can provide our customers with significant advantages to the chemical interventions they are currently using and help them achieve their goal of improving the safety of processed foods they offer to consumers.

Business Strategy

Our goal is to become a sustainable company by commercializing the SDC-based products we have developed with our proprietary technology platform.  We are focused on delivering leading antimicrobial products that address food safety risks across the food industry supply chain.  Key aspects of our business strategy include:

In addition to our current products addressing food safety, we intend to leverage our technology platform through licensing and distribution collaborations in order to develop new products and enter into new markets that could potentially generate multiple sources of revenue.

Our Products

Our near-term focus is on delivering leading antimicrobial products that address food safety risks across the food industry supply chain.  We currently offer PURE Hard Surface as a food contact surface sanitizer and disinfectant to restaurant chains and food processors.  One of our customers is SUBWAY® Restaurants, which has approved PURE Hard Surface for use system-wide (27,000 U.S. stores).  We also intend to offer PURE Control as a  direct food contact processing aid upon our final receipt of approval from the FDA and USDA.  In addition to PURE Hard Surface and PURE Control, we manufacture and sell (i) SDC-based products for end use, (ii) products preserved with SDC and (iii) SDC as a raw material ingredient for manufacturing use. 

PURE® Hard Surface Disinfectant and Sanitizer (Ready to Use)

PURE Hard Surface is our SDC-based, patented and EPA-registered, ready-to-use hard surface disinfectant and food contact surface sanitizer. PURE Hard Surface combines high efficacy and low toxicity with bacterial and viral kill times as few as 30-seconds and 24-hour residual protection. The product completely kills resistant pathogens such as MRSA and Carbapenem-resistant Klebsiella pneumoniae (NDM-1), and effectively eliminates dangerous fungi and viruses including HIV, Hepatitis B, Hepatitis C, Norovirus, Influenza A, Avian Influenza and H1N1. It also eradicates hazardous

food pathogens such as E. coli,  Salmonella,  Campylobacter and Listeria. PURE Hard Surface delivers broad-spectrum efficacy yet remains classified as least-toxic by the EPA. The active ingredient, SDC, has been designated as “Generally Recognized as Safe”, or GRAS, for use on food processing equipment, machinery and utensils.

Through our sales and marketing efforts, we have developed a new customer pipeline of more than 35 national food companies in various stages of evaluating and testing PURE Hard Surface in their operations:

PURE Control

We are currently in the process of developing and obtaining regulatory approval to offer PURE Control as a direct food contact processing aid for poultry, produce, beef and pork.   

Poultry Processing Aid.    During July 2014, we submitted a Food Contact Notification (FCN) to the Food and Drug Administration (FDA) for Salmonella reduction in processing of raw poultry. In November 2014, we withdrew, without prejudice, our FCN for raw poultry due to receipt of a Deficiency Letter from the FDA stating that the agency has developed new data that is currently under review. That data calls into question the long established safety levels of the dietary intake of silver in the U.S. from food contact uses previously approved by the FDA. As a result, the FDA indicated that it would not approve our FCN absent new data or additional information that adequately addresses its new toxicity concerns. Following the completion of additional testing demonstrating further reduction of silver residues to levels that are virtually non-detectable, and subsequent encouraging discussions with the FDA, we resubmitted our poultry FCN in June 2015. In September 2015, we received an Acknowledgement Letter from the FDA stating that our FCN for SDC as a raw poultry processing aid is complete and setting an effective date of December 2015.

Receipt of the FDA’s Acknowledgement Letter enabled us to initiate the next step in the regulatory approval process: obtaining USDA approval. As part of that process, we are preparing to conduct in-plant trials with the authorization of the USDA. We anticipate receiving the required approvals to market PURE Control as a direct food contact processing aid for raw poultry as early as the first calendar quarter of 2016. 

Testing data submitted in support of our FCN showed that, in testing conducted by Dr. James Marsden at Kansas State University, SDC achieved an average reduction in Salmonella of 2.75 log₁₀ CFU/cm2 when applied as an OLR spray and 6.28 log₁₀ CFU/cm2 when combined with an immersion chilling process simulating current U.S. industry practices.  We believe that testing by Dr. Marsden provides support to the following benefits of SDC for poultry processing:

Produce Processing Aid.    In October 2014, we submitted a FCN to the FDA for SDC as a produce processing aid. Because we determined that the FDA was unlikely to approve any new uses of silver in food processing, we withdrew, without prejudice, our produce FCN in January 2015. Following the completion of additional testing demonstrating further reduction of silver residues to levels approaching non-detectable, and subsequent encouraging discussions held with the FDA, we resubmitted our produce FCN in September 2015.  We are not required to obtain any approvals from the USDA to use PURE Control as a produce processing aid.  We anticipate receiving FDA approval of our FCN to market PURE Control as a direct food contact processing aid for fresh produce during the first calendar quarter of 2016. 

Testing data submitted in support of our FCN for produce showed that, in testing conducted by Dr. James Marsden at Kansas State University, SDC achieved average reductions up to 2.36 log₁₀ CFU/cm2 when applied alone as a spray and up to 3.10 log₁₀ CFU/cm2 when combined with chlorine wash, simulating current processing practices. Sensory evaluations of produce treated with SDC indicated no difference in color, appearance or odor to untreated controls; and SDC had no effect on the nutritional composition of the produce.

Currently, produce processors target achieving only a 1 log₁₀ CFU/cm2 reduction per intervention treatment. Data suggests that by incorporating SDC, processors can improve their results 100-fold with only one step. This represents a significant advantage to produce processors as well as improvement to the safety of processed produce going to the consumer.

Other Processing Aids under Development.    We are developing the use of SDC as an intervention in the processing of beef and pork. Subject to successful pilot testing results and development, we intend to submit for both FDA and USDA approval during 2016.  In addition, we may identify other food processing opportunities for SDC.

Additional SDC-Based Products

In addition to PURE Hard Surface and PURE Control, we manufacture and sell (i) SDC-based products for end use, (ii) products preserved with SDC and (iii) SDC as a raw material ingredient for manufacturing use.  These products include: 

 

 

PURE Complete Solution

Our PURE Complete Solution is comprised of PURE Hard Surface and concentrated cleaning products that were launched as companion products to PURE Hard Surface. The PURE Complete Solution offers a comprehensive, cost-effective and user-friendly cleaning, disinfecting and sanitizing product line to end-users including our targeted foodservice, food manufacturing and food processing customers. We can also target this product line to hospital and medical care facilities; janitorial service providers and the distributors that supply them.

PURE® Multi-Purpose and Floor Cleaner Concentrate (End-User Dilutable)

PURE Multi-Purpose Cleaner, is an environmentally responsible cleaning product that is protected by SDC. SDC ensures the quality and safety of PURE Multi-Purpose and Floor Cleaner without human or environmental exposure to toxic chemical preservatives. PURE Multi-Purpose and Floor Cleaner is non-toxic and non-flammable and contains no EDTA, phosphates, ammonia or bleach as well as no VOCs or NPEs. This efficient cleaner provides professional

strength cleaning in a concentrate formula that yields a 1:96 – 1:256 use dilution that is safe for use on all resilient surfaces, including floors, glass and food contact surfaces.

PURE® Multi-Purpose Hi-Foam Cleaner Concentrate (End-User Dilutable)

PURE Multi-Purpose Hi-Foam Cleaner is an environmentally responsible, professional strength high foam forming cleaning product that is protected by SDC. SDC ensures the quality and safety of PURE Multi-Purpose Hi-Foam Cleaner without human or environmental exposure to toxic chemical preservatives. PURE Multi-Purpose Hi-Foam Cleaner is non-toxic and non-flammable and contains no EDTA, phosphates, ammonia or bleach as well as no VOCs or NPEs. PURE Multi-Purpose Hi-Foam Cleaner provides high foam cleaning in a concentrate formula that yields a 1:50 use dilution that is safe for use on stainless steel equipment, resilient floors, walls and painted surfaces.

Axen® 30 (Ready-to-Use)

Axen30 is our patented and EPA-registered hard surface disinfectant and is a predecessor ready-to-use product to PURE Hard Surface. Axen30 is currently sold on a limited basis by distributors under their respective private labels. 

Axenohl® (Raw Material Ingredient)

Axenohl is our patented and EPA-registered SDC-based antimicrobial formulation for use as a raw material ingredient in the manufacturing of EPA-registered products. Axenohl is a colorless, odorless and stable solution that provides fast acting efficacy against bacteria, viruses and fungi when manufactured into consumer and commercial disinfecting and sanitizing products.

SILVÉRION® (Raw Material Ingredient)

SILVÉRION is our patented SDC-based antimicrobial formulation for use as a raw material ingredient in the manufacturing of personal care products. It can be used as either an active ingredient or a preservative. SILVÉRION is a colorless, odorless and stable solution that provides ionic silver in a water-soluble form. It provides fast acting efficacy at low concentrations against a broad-spectrum of bacteria, viruses, yeast and molds. SILVÉRION is currently sold domestically and outside of the United States in various personal care products.

EPA Registrations

We sell our EPA-regulated products under the following three EPA registrations: (i) SDC3A, our hard surface disinfectant and food contact surface sanitizer, (ii) Axen30, our hard surface disinfectant, and (iii) Axenohl, our antimicrobial formulation for use as a raw material in the manufacturing of EPA-registered products.

 

PURE Hard Surface SDC3A Registration

The EPA registration for SDC3A, marketed as PURE Hard Surface, our disinfectant and food contact surface sanitizer, includes the following efficacy claims:

 

 

 

The EPA registration for SDC3A also claims 24-hour residual protection against certain bacteria.

Toxicity Categories

The EPA categorizes the toxicity of antimicrobial products from Category I to Category IV. The following table shows the EPA toxicity categories and required signal words.

 

 

SDC3A is a Category IV product for which no signal words are required.

Axen30 Registration

Axen30 is a hard surface disinfectant and is a predecessor product to SDC3A. It offers similar broad-spectrum efficacy but longer kill times. Axen30 is not approved for use on food contact surfaces. Axen30 is currently sold on a limited basis by distributors under their respective private labels.

Axenohl Registration

Axenohl is registered as a raw material ingredient for the manufacturing of EPA-registered products and as such does not carry specific efficacy claims.

Intellectual Property

Our policy is to pursue patents and trademarks, maintain trade secrets and use other means to protect our technology, inventions and improvements that are commercially important to the development of our business.

We have applied for U.S. and foreign patent protection for our SDC technology. Currently, we own twelve U.S. issued patents. Approximately twenty-six patents have been issued outside of the U.S., and we own approximately ten patents pending around the world. The expiration dates for our ten U.S. issued patents begin in 2018 and end in 2030. In September 2013, we decided to abandon pending and issued patents in non-strategic international territories. Future patent prosecution and defense efforts are intended primarily for North America, Europe, Asia and Mexico.

Additional patent applications may not be granted, or, if granted, may not provide adequate protection to us. We also intend to rely on whatever protection the law affords to trade secrets, including unpatented know-how. Other companies, however, may independently develop equivalent or superior technologies or processes and may obtain patents or similar rights with respect thereto.

Although we believe that we have developed our technology independently and have not infringed, and do not infringe, on the patents of others, third parties may make claims that our technology does infringe on their patents or other intellectual property. In the event of infringement, we may, under certain circumstances, be required to modify our infringing product or process or obtain a license. We may not be able to do either of those things in a timely manner if at all, and failure to do so could have a material adverse effect on our business. In addition, we may not have the financial or other resources necessary to enforce a patent infringement or proprietary rights violation action or to defend ourselves against such actions brought by others. If any of the products we develop infringe upon the patent or proprietary rights of others, we could, under certain circumstances, be enjoined or become liable for damages, which would have a material adverse effect on our business.

We also rely on confidentiality and nondisclosure agreements with our employees, customers, consultants, advisors, licensees and potential partners to protect our technology, intellectual property and other proprietary property. Pursuant to the foregoing and for other reasons, we face the risk that our competitors may acquire information which we consider to be proprietary, that such parties may breach such agreements or that such agreements will be inadequate or unenforceable.

Further, we own the registered trademarks or pending trademark applications for PURE Bioscience®, Powered by SDC Ag+®, PURE®, Axenohl®, Axen®, SILVÉRION®, and PURE Control®  . In addition, we have applications for other trademarks pending around the world, which may or may not be granted. We previously allowed the marks Kinderguard®, Cruise Control®, Staphacide®  , Nutripure®, Elderguard®, and Critterguard® to go abandoned, as they were no longer in line with our food safety business strategy.

Research and Development

We recognize the importance of innovation to our business strategy and long-term success. A key aspect of our business strategy is to leverage our technology platform to develop additional proprietary products and applications, including end use products and raw material formulations derived from our technology platform. We conduct our primary research and development activities in-house and use third-party laboratories to conduct independent testing. We also engage development partners to perform research and development activities at their own expense for specific products and

processes using SDC. Amounts spent on research and development activities during the fiscal years ended July 31, 2015 and 2014 were $790,000 and $1,032,000, respectively.

We have developed several new SDC-based products, including a dilutable food processing aid. In addition, we may continue to develop or may develop with strategic partners various other SDC-based product candidates including a dilutable food contact surface sanitizer, hard surface disinfecting and skin cleansing wipes, formulations for industrial biofilm control, high level disinfectants, agriculture treatments, dilutable sanitizer and virucide, food additives and preservatives as well as medical products.

Sales and Marketing

A critical aspect of our business strategy is to leverage the industry experience of our internal sales force and management team in order to maximize the commercial potential of our technology platform in the food industry. During 2014 and 2015, we strengthened our internal sales and marketing capability by adding to our team experienced food industry sales professionals, our chief executive officer and board members who have significant food industry management experience.

According to the CDC, FDA and other food industry sources, food contamination and food borne illnesses have been increasing. We believe our focus on food safety is addressing a significant need to provide safe, non-toxic and effective solutions to mitigate the increase of food contamination and food borne illnesses. We believe our products can be used effectively to prevent or mitigate the risk of food contaminants in various stages of the food supply chain. Our current sales and marketing efforts include demonstrating our SDC products’ effectiveness as a hard surface disinfectant and sanitizer for:

We also intend to offer PURE Control as  a direct food contact processing aid upon our final receipt of approval from the FDA and USDA.  We anticipate receiving the required approvals to market PURE Control as a direct food contact processing aid for raw poultry and fresh produce during the first calendar quarter of 2016.  We also plan to continue testing and seeking to obtain regulatory approval to utilize PURE Control as a direct food contact processing aid for raw meats, including beef and pork.

Our sales team is actively developing customer relationships with certain segments of foodservice operators, food processors and food manufacturers. Due to both the technical nature of our products and existence of established brands, the sales cycle to secure a new customer is long and unpredictable. We have recently conducted numerous successful product evaluation trials and comparative testing of our SDC-based products with prospective customers, which we believe will result in future revenue. We believe our products provide superior pathogen and hygiene control performance characteristics as compared with legacy chemical products, which also have higher toxicity profiles than our SDC-based products.

In addition to our direct sales and marketing efforts, we intend to selectively form partnerships with industry leaders for a variety of uses and applications of our products and technology. These partnerships may be for both U.S. and international markets where we believe we may leverage the product development, sales and marketing resources of business partners to commercialize our SDC technology in their respective markets.

A significant portion of our historical revenues were generated by an international chemical distributor who sold our SDC-based formulations to other manufacturers for use as a raw material ingredient in the production of personal care products. Other historical revenues were primarily to U.S. distributors who sold our SDC-based products into the consumer, industrial janitorial and sanitization market.

Sales Concentration

Net product sales were $729,000 and $550,000 for the years ended July 31, 2015 and 2014, respectively. For the year ended July 31, 2015, one legacy customer accounted for 47% of our net product sales.  No other individual customer accounted for 10% or more of our net product sales. The geographic breakdown of net product sales was as follows: 97% U.S; and 3% foreign. For the year ended July 31, 2014, two individual customers accounted for 66% of our net product sales. No other individual customer accounted for 10% or more of our net product sales. The geographic breakdown of net product sales was as follows: 100% U.S.

From time to time, one or a small number of our customers may represent a significant percentage of our revenue. Our three largest customers accounted for 64% of our revenue for the fiscal year ended July 31, 2015. Although we have agreements with many of our customers, these agreements typically do not prohibit customers from purchasing products and services from competitors. A decision by any of our major customers to significantly reduce the amount of product ordered or license fees paid, or their failure or inability to pay amounts owed to us in a timely manner, or at all, could have a significant adverse effect on our business.

Competition

The markets for SDC, our SDC-based products and each of their potential applications are highly competitive. We have a number of competitors that vary in size, scope and breadth of products offered.  These competitors include some of the largest global corporations, and most of our competitors have significantly greater financial resources than we do. We expect to face additional competition from other competitors and technologies in the future.

Because SDC is a new antimicrobial technology to the food industry, our success will depend, in part, upon our ability to achieve a share of our target markets at the expense of established and future products. Even where SDC may have technological competitive advantages over competing products, we, our partners or our distributors, will need to invest significant resources in order to attempt to displace traditional technologies sold by, what are in many cases, well-known industry leaders.

 Manufacturing

On December 11, 2013, we entered into a five-year strategic collaboration agreement with St. Louis-based Intercon Chemical Company (ICC). The agreement consists of a multi-prong approach to help us accelerate the commercialization of our unique and proprietary SDC-based products. The strategic collaboration agreement provides:

The agreement may be terminated by mutual written consent, or by either party upon the material breach of the terms of the agreement by the other party.

Silver is the primary active ingredient in SDC and is a readily available commodity. The other active and inactive ingredients in our products are readily available from multiple sources.

Government Regulation

Our business is subject to various government regulations relating to the protection of public health and the environment. Among these are laws that regulate the manufacture, storage, distribution and labeling of our products, as well as the use, handling, storage and disposal of certain materials in the manufacturing of our products.

Regulation in the United States

Certain environmental and regulatory matters significant to us are discussed below.

Requirements Imposed by the EPA and Similar State Agencies

We manufacture and sell in the U.S. certain disinfecting products that kill or reduce microorganisms (bacteria, viruses, fungi). The manufacture, labeling, handling and use of these products are regulated by the EPA under the Federal Insecticide, Fungicide, and Rodenticide Act, or FIFRA. We currently sell three products registered by the EPA under FIFRA, certain of which are approved for use on food contact surfaces and others of which are approved for use on non-food contact hard surfaces. EPA product registration requires meeting certain efficacy, toxicity and labeling requirements and paying ongoing registration fees.

Although states do not generally impose substantive requirements different from those of the EPA, each state in which our products are sold requires registration and payment of a fee. California and certain other states have adopted additional regulatory programs applicable to these types of products that, in some cases, impose a fee on total product sales in the state.

Based on our experience and our knowledge of current trends, we expect the costs and delays in receiving necessary federal and state approvals for these types of products may increase in the coming years.

Requirements Imposed by the FDA and USDA

The FDA’s Food Contact Notification (“FCN”) Program is intended to ensure the safety of Food Contact Substances (FCS) used in food processing and packaging.

 

In addition to the FDA’s FCN Program, the Company will be required to obtain USDA approval for the use of PURE Control on meat or dairy products.

Requirements Imposed by Ingredient Legislation

Numerous federal, state and local laws regulate the sale of products containing certain identified ingredients that may impact human health and the environment. For instance, California has enacted Proposition 65, which requires the disclosure of specified listed ingredient chemicals on the labels of products. Although none of the ingredients in our current products is reportable under Proposition 65, this and other similar legislation may become more comprehensive in the future and/or new products we may develop could be subject to these regulations.

Requirements Imposed by Other Environmental Laws

A number of federal, state and local environmental, health and safety laws govern the use, handling, storage and disposal of certain materials. Our current manufacturing process for SDC-based products is a “zero waste” process, meaning that no byproducts are created, and we do not use hazardous materials, as defined by applicable environmental laws, in the manufacturing of these products. As such, some of these U.S. environmental laws are not generally applicable to us in their current form. However, these laws may in the future identify as hazardous materials certain materials that we use in our manufacturing processes, or we may opt to or be forced to change our manufacturing procedures in a way that subjects our products or operations to these laws.

Requirements Imposed by the FDA and USDA

Various laws and regulations have been enacted by federal, state, local and foreign jurisdictions regulating certain products we anticipate manufacturing and selling for controlling microbial growth in or on foods. In the United States, these requirements generally are administered by the FDA. However, the U.S. Department of Agriculture and EPA also may share in regulatory jurisdiction of antimicrobials applied directly to food as it pertains to poultry and meats.

Regulation Outside the United States

The commercialization of SDC-based products in countries other than the U.S. may require that we, or companies with whom we partner for such foreign commercialization, obtain necessary approvals from foreign regulatory authorities comparable to the EPA and USDA, among others. Applicable approval processes and ongoing requirements vary from country to country and may involve more time and expense than that required to obtain approvals in the U.S. In international markets, we currently sell our products under active registrations held by us, or by our distributors. We intend to continue to process registrations ourselves or through distributors as required.

We currently hold a registration from Health Canada for our disinfectant product. Other third-party distributors are actively pursuing registrations for our disinfectant products in various Asian markets. Additionally, an opinion has been granted under the Scientific Committee on Consumer Products to sell SDC in the European Union for use in cosmetics, which includes personal care products.

Employees

As of October 28, 2015, we employed 11 regular full-time employees. We believe that we have been successful in attracting skilled and experienced personnel, but competition for personnel is intense and there can be no assurance that we will be able to attract and retain qualified personnel in the future. None of our employees are covered by collective bargaining agreements and we consider relations with our employees to be good.

Company Information

We were incorporated in the state of California in August 1992 as Innovative Medical Services. In September 2003, we changed our name to PURE Bioscience. In March 2011, we reincorporated in the state of Delaware under the name “PURE Bioscience, Inc.”

Our corporate offices are located at 1725 Gillespie Way, El Cajon, California 92020. Our telephone number is (619) 596-8600. Our website address is www.purebio.com. We make available free of charge on our website our periodic and current reports, proxy statements and other information as soon as reasonably practicable after such reports are filed with the Securities and Exchange Commission, or SEC. Information contained on, or accessible through, our website is not part of this report or our other filings with the SEC. Our SEC filings are also available to the public from the SEC’s website at www.sec.gov.

 

 

Item 1A.  Risk Factors

You should carefully consider the following information about risks and uncertainties that may affect us or our business, together with the other information appearing elsewhere in this Annual Report on Form 10-K, including our consolidated financial statements and the related notes thereto. If any of the following events, described as risks, actually occur, either alone or taken together, our business, financial condition, results of operations and future growth prospects would likely be materially and adversely affected. In these circumstances, the market price of our common stock could decline, and you may lose all or part of your investment in our securities. An investment in our securities is speculative and involves a high degree of risk. You should not invest in our securities if you cannot bear the economic risk of your investment for an indefinite period of time and cannot afford to lose your entire investment. There may be additional risks that we do not presently know of or that we currently believe are immaterial which could also impair our business and financial position.

Risks Related to Our Business and Industry

We have a history of losses, and we may not achieve or maintain profitability.

We had a loss of $7.6 million for the fiscal year ended July 31, 2015, and a loss of $11.1 million for the fiscal year ended July 31, 2014. As of July 31, 2015, we have incurred a cumulative net loss of approximately $89 million. Although we expect to continue to have losses in future periods, we are unable to predict the extent of our future losses or when or if we will become profitable, and it is possible we will never become profitable. Even if we do achieve profitability, we may not be able to sustain or increase profitability on an ongoing basis.

None of our existing agreements, including with Subway, contain provisions that guarantee us any minimum revenues. If the penetration into the marketplace of silver dihydrogen citrate, or SDC, and SDC-based products is unsuccessful, revenue growth is slower than anticipated or operating expenses exceed expectations, it may take an unforeseen period of time to achieve or maintain profitability and we may never achieve or maintain profitability. Slower than anticipated revenue growth could force us to reduce research, testing, development and marketing of our technologies, and/or force us to reduce the size and scope of our operations, to sell or license our technologies to third parties, or to cease operations altogether.

The risks associated with our business may be more acute during periods of economic slowdown or recession. In addition to other consequences, these periods may be accompanied by decreased consumer and institutional spending in general, as well as decreased demand for, or additional downward pricing pressure on, our products. Accordingly, any prolonged economic slowdown or a lengthy or severe recession with respect to either the U.S. or the global economy is likely to have a material adverse effect on our results of operations, financial condition and business prospects. As a result, given the current weakness and uncertainties in the U.S. and in certain overseas economies, we expect that our business will continue to be adversely affected for so long as, and to the extent that, such adverse economic conditions and uncertainty exist.

Our future capital needs are uncertain, and we currently expect that we will need additional funds in the future which may not be available on acceptable terms or at all. 

Our capital requirements will depend on many factors, including, among other factors:

On October 23, 2015, we raised $6 million in a private placement financing of common stock and warrants to purchase common stock from Franchise Brands, LLC.  See Note 13 to the consolidated financial statements.  Therefore, as of October 28, 2015, we believe that our current cash resources are sufficient to meet our anticipated needs during the next twelve months, however, we do not yet have, and we may never have, significant cash inflows from product sales or from other sources of revenue to offset our ongoing and planned investments in corporate infrastructure, research and development projects, regulatory submissions, business development activities, and sales and marketing, among other investments. Some or all of our ongoing or planned investments may not be successful. In addition, irrespective of our cash resources, we may be contractually or legally obligated to make certain investments, which cannot be postponed.

 

We expect that we will need to increase our liquidity and capital resources by one or more measures, which may include reducing operating expenses, raising additional financing in future periods through the issuance of debt, equity, or convertible securities, entering into partnerships, licenses, or other arrangements with third parties, reducing the exercise price of outstanding warrants, or through other means, any one of which could reduce the value to us, perhaps substantially, of our technology and its commercial potential. There is no guarantee that we would be able to obtain capital on terms acceptable to us, or at all. Insufficient funds would result in a material adverse effect on our business and operations and could cause us to fail to execute our business plan, fail to take advantage of future opportunities, or fail to respond to competitive pressures or customer requirements, and further may require us to delay, scale back or eliminate some or all of our research and product development programs, license to third parties the right to commercialize products or technologies that we would otherwise commercialize ourselves, or to reduce or cease operations. If adequate funds are not available when needed, we may be required to significantly modify our business model and operations to reduce spending to a sustainable level. Such modification of our business model and operations could also result in an impairment of assets which cannot be determined at this time. Furthermore, if we issue equity or convertible debt securities to raise additional funds, our existing stockholders may experience dilution, and in addition the new equity or debt securities may have rights, preferences and privileges senior to those of our existing stockholders. If we incur additional debt, it may increase our leverage relative to our earnings or to our equity capitalization.

As of October 28, 2015, we have 55,192,630 shares of common stock issued and outstanding or reserved for issuance. Shares reserved for issuance include shares under equity compensation plans, vested and unvested options, warrants, and unvested restricted stock units. Our current authorized capital stock is limited to 100,000,000 shares of common stock and 5,000,000 shares of preferred stock. Any increase in our authorized capital stock would require the approval of a majority of our stockholders as well as the approval of our Board of Directors. If we were unable to increase our authorized capital stock for any reason, our ability to raise additional capital through the issuance of equity or convertible debt would be severely compromised and we may be unable to obtain equity or convertible debt capital at all.

Raising additional funds by issuing securities or through collaboration and licensing arrangements may cause dilution to existing stockholders, restrict our operations or require us to relinquish proprietary rights.

We expect that we will need to increase our liquidity and capital resources in future periods. We have a history of raising funds through offerings of our common stock, and we may in the future raise additional funds through public or private equity offerings, debt financings or corporate collaborations and licensing arrangements. To the extent that we raise additional capital by issuing equity securities, our stockholders’ ownership will be diluted. Additionally, any debt financing we obtain may involve covenants that restrict our operations. These restrictive covenants may include, among other things, limitations on borrowing, specific restrictions on the use of our assets, as well as prohibitions on our ability to create liens on our assets, pay dividends on or redeem our capital stock or make investments. In addition, if we raise funds through collaboration and licensing arrangements, it may be necessary to grant licenses on terms that are not favorable to us or relinquish potentially valuable rights to our products or proprietary technologies. We may be required in future collaborations to relinquish all or a portion of our sales and marketing rights with respect to our products or license intellectual property that enable licensees to develop competing products in order to complete any such transaction.

Our authorized common stock remains 100,000,000 shares. In addition to capital raising activities, other possible business and financial uses for our authorized common stock include, without limitation, future stock splits, acquiring other companies, businesses or products in exchange for shares of common stock, issuing shares of our common stock to partners in connection with strategic alliances, attracting and retaining employees by the issuance of additional securities under our various equity compensation plans, satisfying any debt we may have by issuing equity securities, or other transactions and corporate purposes that our Board of Directors, or Board, deems are in our best interest. Additionally, shares of common stock could be used for anti-takeover purposes or to delay or prevent changes in control or management of the Company. For example, without further stockholder approval, our Board could approve the sale of shares of common stock in a private transaction to purchasers who may oppose a takeover or favor our current Board. We cannot provide assurances that any issuances of common stock will be consummated on favorable terms or at all, that they will enhance stockholder value, or that they will not adversely affect our business or the trading price of our common stock.

Under our Certificate of Incorporation, our Board could also authorize the issuance of up to 5,000,000 shares of preferred stock on terms determined by the Board. If any common or preferred stock is issued, the interests of holders of our common stock could be diluted, and shares of preferred stock could be issued in a financing in which investors purchase preferred stock with rights, preferences and privileges that may be superior to those of the common stock, and the market price of our common stock could decline.

 

If outstanding options and warrants to purchase shares of our common stock are exercised, the interests of our stockholders could be diluted.

As of October 28, 2015 in addition to 55,192,630 shares of common stock issued and outstanding, we had 434,218 shares reserved for issuance under equity compensation plans for vested and unvested stock options and 3,210,000 shares reserved for issuance for vested and unvested restricted stock units. We also had 20,368,488 shares reserved for issuance on the exercise of outstanding warrants.

We may elect to reduce the exercise price of outstanding warrants as a means of providing additional financing to us. The exercise of options and warrants, and the sale of shares underlying such options or warrants, could have an adverse effect on the market for our common stock, including the price that an investor could obtain for their shares. Investors may experience dilution in the net tangible book value of their investment upon the exercise of options and warrants currently outstanding, as well as options and warrants that may be granted or issued in the future.

Because we are an early stage company, it is difficult to evaluate our prospects and our financial results may fluctuate, which may cause our stock price to fall.

Since acquiring the rights to our SDC technology, we have encountered and likely will continue to encounter risks and difficulties associated with introducing or establishing our products in rapidly evolving markets. These risks include the following, among others:

Any failure to successfully address these risks and uncertainties could seriously harm our business and prospects. We may not succeed given the technological, marketing, strategic and competitive challenges we face. In addition, because of our limited operating history and the early stage of market development for our SDC technology, we have limited insight into trends that may emerge and affect our business. Forecasting future revenues is difficult, especially because our technology is novel, and market acceptance of our products could change rapidly. In addition, our customers and potential customers in the foreseeable future are highly concentrated. Fluctuations in the buying patterns of our current or potential customers could significantly affect the level of our sales on a period to period basis. As a result, our financial results could fluctuate to an extent that may adversely affect our stock price. There are a number of other factors that could cause our financial results to fluctuate unexpectedly, including product sales, the mix of product sales, the cost of product sales, our ability for any reason to be able to meet demand, the achievement and timing of research and development and regulatory milestones, changes in expenses, including non-cash expenses such as the fair value of stock options granted, and manufacturing or supply issues, among other factors.

A loss of one or more of our key customers could adversely affect our business.

From time to time, one or a small number of our customers may represent a significant percentage of our revenue. Our three largest customers accounted for 64% of our net product sales for the fiscal year ended July 31, 2015. Our largest customer accounted for 47% of net product sales.  No other individual customer accounted for 10% or more of our net product sales. Although we have agreements with many of our customers, these agreements typically do not prohibit customers from purchasing products and services from competitors. A decision by any of our major customers to significantly reduce the amount of product ordered or license fees paid, or their failure or inability to pay amounts owed to us in a timely manner, or at all, could have a significant adverse effect on our business. 

 

We are dependent on our core SDC technology and if our efforts to achieve or maintain market acceptance of our core SDC technology are not successful, we are unlikely to attain profitability.

We have and are currently focusing substantially all of our time and financial resources in the development and commercialization of our core SDC technology. We believe SDC has applications in multiple industries and we expect that sales of SDC and SDC-based products will constitute a substantial portion, or all, of our revenues in future periods. Any material decrease in the overall level of sales or expected sales of, or the prices for, SDC or SDC-based products, whether as a result of competition, change in customer demand, or any other factor, would have a materially adverse effect on our business, financial condition and results of operations. We are marketing our antimicrobial silver ion technology to industrial and consumer markets. These technologies and the products that incorporate them have not yet been accepted into the marketplace, and may never be accepted. In addition, even if our products achieve market acceptance, we may not be able to maintain product sales or other forms of revenue over time if new products or technologies are introduced that are more favorably received than our products, are more cost-effective or otherwise render our products less attractive or obsolete.

We are subject to intense competition.

Our SDC-based products compete in highly competitive markets dominated by prominent chemical and pharmaceutical companies. Most of our competitors have been in business for a longer period of time than we have, and have a greater number of products on the market and greater financial and other resources than we do. Many of our competitors already have well established brands and distribution capabilities, and in some cases are able to leverage the sale of other products with more favorable terms for products competing with our own. We also have significantly fewer employees than virtually all of our competitors. Furthermore, recent trends in this industry are for large chemical and pharmaceutical companies to consolidate into a smaller number of very large entities, which further concentrates financial, technical and market strength and increases competitive pressure in the industry. If we directly compete with these very large entities for the same markets and/or products, their financial strength could prevent us from capturing a

share of those markets. It is also possible that developments by our competitors will make our technologies or products noncompetitive or obsolete. Our ability to compete will depend upon our ability, and the ability of our distributors and other partners, to develop brand recognition and novel distribution methods, and to displace existing, established and future products in our relevant target markets. We, or our distributors and partners, may not be successful in doing so, which would have a materially adverse effect on our business, financial condition and results of operations.

We have limited sales, marketing and product distribution experience.

We have limited experience in the sales, marketing and distribution of our products. While we previously relied primarily on product distribution arrangements and/or sales and marketing services provided by third parties, we have now developed and obtained registration by the Environmental Protection Agency, or EPA, of our proprietary brand, PURE® Hard Surface disinfectant and food contact surface sanitizer, and have resumed direct control of our sales of this product through a restructuring of our sales strategy and operations. Our new sales and marketing strategy requires that we enact various operational changes in our business, including making significant investments in our own sales and marketing organization. We intend to market and sell our PURE® Hard Surface and related SDC-based products into consumer, commercial and institutional markets through both traditional and alternative distribution channels. Additionally, Subway has agreed to make the PURE Hard Surface disinfectant available in its franchised locations in the U.S; however, we cannot assure you whether any franchisees will choose to purchase and use the product.

We have commenced the launch of a multi-channel national sales program, which involves our development of an internal team of industry sales experts to manage each of our key channels and our deployment of contract sales representatives within each of those channels. Our current sales, distribution and marketing strategies and programs may not be successful, and we may not be able to establish the sales, marketing, and distribution capabilities necessary to directly control and manage these aspects of our operations. If we are not able to successfully sell, market and distribute these products directly, we may seek to establish product distribution arrangements with third parties, which may not be available on terms acceptable to us, if at all.

We rely on third parties to develop SDC-based products, and they may not do so successfully or diligently.

On December 11, 2013, we entered into a five-year strategic collaboration agreement with St. Louis-based Intercon Chemical Company (“ICC”) where we granted ICC distribution and certain development rights and rights to be the exclusive manufacture for all our SDC-based products.

We may also rely in part, on other third parties to whom we license rights to our technology to develop and commercialize products containing SDC for many of the applications for which we believe SDC-based products have, or may have, market opportunities.

Our reliance on ICC and other third parties for development activities reduces our control over these activities. In such arrangements, we have relied, and expect in the future to rely, on the third party to fund and direct product development activities and appropriate regulatory filings. Any of these third parties may not be able to successfully develop such SDC-based products due to, among other factors, a lack of capital, a lack of appropriate diligence, insufficient devotion to sales efforts, a change in the evaluation by the third party of the market potential for SDC-based products, technical failures, and poorer than expected results from testing or trial use of any products that may be developed. If the third parties on which we rely are not successful in such development activities, our business and operating results would be adversely affected.

If we are unable to successfully develop or commercialize new applications of our SDC technology, or if such efforts are delayed, our operating results will suffer.

In addition to its use on hard surfaces, we are pursuing potential applications of our SDC technology as a broad-spectrum antimicrobial for use as a direct food contact processing aid where it is applied as a wash for produce, meat and poultry as an intervention to prevent or kill various food-borne pathogens. Any product that may be developed in these fields may be delayed or may never achieve regulatory approval or be commercialized. Delays in achieving regulatory approvals for particular applications of our products could significantly impact our product development costs. If

indications are commercialized, we may not receive a share of future revenues that provides an adequate return on our historical or future investment.

We are dependent on third-party manufacturers, over whom we have limited control, to manufacture our products.

We do not have any manufacturing facilities ourselves and we currently rely on ICC to manufacture our SDC-based products and may in the future rely on one or more third-party manufacturers to properly manufacture our products. We may not be able to quickly replace our manufacturing capacity if ICC is unable to manufacturer our products as a result of a fire, natural disaster (including an earthquake), equipment failure or other difficulty, or if such ICC facilities are deemed not in compliance with current “good manufacturing practices,” and the noncompliance could not be rapidly rectified. ICC is our single manufacturer for our SDC-based products and may not be replaced without significant effort and delay in production. A supply interruption or an increase in demand beyond our current manufacturer’s capabilities could harm our ability to manufacturer such products until new manufacturers are identified and qualified, which would have a significant adverse effect on our business and results. Any third-party manufacturer that we find may not match our quality standards or be able to meet customer requirements.

Additionally, our inability or reduced capacity to have our products manufactured would prevent us from successfully evaluating or commercializing our proposed products. Our dependence upon third parties for the manufacture of our products may adversely affect our profit margins and our ability to develop and deliver proposed products on a timely and competitive basis.

If we are not able to manage any growth we achieve effectively, we may not become profitable.

If our efforts to achieve and maintain market acceptance of our SDC technology are successful, we will need to expand our business operations. We may not have sufficient resources to do so. If we invest in additional infrastructure, we may not be effective in expanding our operations and our systems, procedures or controls may not be adequate to support any such expansion. In addition, we would need to provide additional sales and support services to our partners, potentially in multiple markets, which we may not be able to do. Failure to properly manage increased customer demands, if any, could result in a material adverse effect on customer satisfaction, our ability to meet our contractual obligations, and our operating results.

The industries in which we operate are heavily regulated and we may be unable to compete effectively.

We are focused on the marketing and continued development of our SDC antimicrobial technology. We believe that products derived from our SDC technology, or products that may be derived from our SDC technology in future periods, require or will require approval by government agencies prior to marketing or sale in the U.S. or in foreign markets. Complying with applicable government regulations and obtaining necessary approvals can be, and has historically been, time consuming and expensive, due in part, we believe, to the novel nature of our technology. Regulatory review could involve delays or other actions adversely affecting the development, manufacture, marketing and sale of our products. While we cannot accurately predict the outcome of any pending or future regulatory review processes or the extent or impact of any future changes to legislation or regulations affecting review processes, we expect such processes to remain time consuming and expensive as we, or our partners, apply for approval to make new or additional efficacy claims for current products or to market new product formulations. Obtaining approvals for new SDC-based products in the U.S., or in markets outside the U.S., could take several years, or may never be accomplished.

SDC is a platform technology rather than a single use applied technology. As such, products developed from the platform may fall under the jurisdiction of multiple U.S. and international regulatory agencies. Our disinfectant and sanitizer products are regulated in the U.S. by the EPA. In addition to the EPA, each of the 50 United States has its own government agencies that regulate the sale or shipment of our products into their state. We have obtained registration for these products from the EPA and all states into which such products are currently marketed and sold. We are required to meet certain efficacy, toxicity and labeling requirements and pay ongoing fees in order to maintain such registrations. We may not be able to maintain these registrations in the future, which may eliminate our continued ability to market and sell our products in some or all parts of the U.S. We also may not be able to obtain necessary registrations with the

EPA and applicable states for other SDC disinfectant and sanitizer products that we or our partners may develop, which would limit our ability to sell any such products in the future.

Some potential applications of SDC, such as those aimed at healthcare, veterinary and certain food preparation markets, may require approval of other government agencies prior to marketing or sale in the U.S. or in foreign markets, such as the U.S Food and Drug Administration, or FDA, or the United States Department of Agriculture, or USDA. Obtaining FDA and/or USDA approval is a complicated and expensive process and such approvals may never be obtained for any SDC products. If FDA and/or USDA approvals are obtained, the approvals may limit the uses for which SDC products may be marketed such that they may not be profitable to us, and the applicable products would be subject to pervasive and continuing regulation by the FDA and/or USDA that could lead to withdrawal or limitation of any product approvals.

For example, in November 2014, we withdrew, without prejudice, our FCN for raw poultry due to receipt of a Deficiency Letter from the FDA stating that the agency has developed new data that is currently under review, which data calls into question the long established safety levels of the dietary intake of silver in the U.S. from food contact uses previously approved by the FDA. As a result, the FDA indicated that it would not approve our FCN absent new data or additional information that adequately addresses its new toxicity concerns.  We also received a similar Deficiency Letter from the FDA for the FCN we submitted in October 2014 for the use of SDC to reduce Salmonella, E. coli and Listeria in the processing of produce. In January 2015, we withdrew, without prejudice, our produce FCN and postponed the filing of our FCN for the use of SDC as a processing aid for beef and pork. We resubmitted our poultry FCN in June 2015. In September 2015, we received an Acknowledgement Letter from the FDA stating that our FCN for SDC as a raw poultry processing aid is complete and setting an effective date of December 2015.  Following the completion of additional testing demonstrating further reduction of silver residues to levels approaching non-detectable, and subsequent encouraging discussions held with the FDA, we resubmitted our produce FCN in September 2015.  In 2016, we expect to complete testing for the use of SDC as a processing aid for beef and pork. FCN submission is expected by mid-2016. However, if we experience any further delays in achieving regulatory approval, or, if we failed to achieve regulatory approval of the SDC products, it would have a significant adverse effect on our business and we would most likely not be able to support our continued operations.

We intend to fund and manage certain of our EPA-regulated product development internally, in conjunction with engaging regulatory consultants and partnering with other third parties. We have partnered, or intend to partner, with third parties who are seeking, or intend to seek, approvals to market SDC-based products in markets outside the U.S., and with other third parties who are developing FDA-regulated SDC-based products who, upon such development, would seek FDA approvals of such products. Our ability to market and sell our products is dependent on our and our partners’ ability to obtain and maintain required registrations and approvals of applicable regulatory agencies. Failure by our partners or us to comply with applicable regulations could result in fines or the withdrawal of approval for us or our partners and distributors to market our products in some or all jurisdictions or for certain indications, which could cause us to be unable to successfully commercialize SDC or otherwise achieve revenues from sales of such products.

We are subject to substantial regulation related to quality standards applicable to our manufacturing and quality processes, and our partners, including our third-party manufacture. Failure to comply with applicable quality standards could affect our ability to commercialize SDC products.

The EPA and other applicable U.S. and foreign government agencies regulate our and our partners’ systems and processes, including those of ICC, for manufacturing SDC-based products. These regulations require that we and our partners observe “good manufacturing practices” in order to ensure product quality, safety and effectiveness. Failure by us or our partners to comply with current or future government regulations and quality assurance guidelines could lead to temporary manufacturing shutdowns, product recalls or related field actions, product shortages, and/or delays in product manufacturing, any or all of which could cause significant cost to us. Further, efficacy or safety concerns and/or manufacturing quality issues with respect to our products or those of our partners could lead to product recalls, fines, withdrawal of approvals, and/or declining sales, any or all of which could result in our failure to successfully commercialize SDC or otherwise achieve revenue growth.

Pricing and supply issues may have a material impact on our margins and our ability to supply our customers.

All of the supply ingredients used to manufacture our products are available from multiple suppliers. However, commodity prices for some ingredients can vary significantly and the margins that we are able to generate could decline if prices rise. For example, both silver and citric acid prices have been volatile in recent periods.

In addition to such commodities, for finished products we also rely on producers of specialized packaging inputs such as bottles and labels. Due to their specialized nature, the supply of such inputs can be periodically constrained and result in additional costs to obtain these items, which may in turn inhibit our ability to supply products to our customers.

We are generally unable to increase our product prices to our customers, partners and distributors quickly in order to maintain our margins, and significant price increases for key inputs could therefore have an adverse effect on our results of operations. Price increases can also result in lost sales, and any inability to supply our customers’ orders can lead to lost future sales to such customers.

We expect ICC to be the sole source supplier of our SDC concentrate and we may use other third parties to blend, package and provide fulfillment activities for our finished products in future periods. We expect that our margins may be reduced by using ICC and other such third parties, and our ability to maintain product quality may not be as extensive or effective as when we produce these products in our own facility(ies). Any quality control issues could lead to product recalls and/or the loss of future sales, which would reduce our revenues and/or profits.

 

If we suffer negative publicity concerning the safety or efficacy of our products, our sales may be harmed.

If concerns should arise about the safety or efficacy of any of our products that are marketed, regardless of whether or not such concerns have a basis in generally accepted science or peer-reviewed scientific research, such concerns could adversely affect the market for those products. Similarly, negative publicity could result in an increased number of product liability claims, whether or not those claims are supported by applicable law.

Third parties may claim that we infringe their proprietary rights and may prevent us from manufacturing and selling some of our products.

Our manufacture, use and sale of SDC-based products may subject us to lawsuits relating to the validity and infringement of patents or other proprietary rights of third parties. Litigation may be costly and time-consuming, and could divert the attention of our management and technical personnel. If we are found to have violated the trademark, trade secret, copyright, patent or other intellectual property or proprietary rights of others, such a finding could result in the need to cease use of a trademark, trade secret, copyrighted work or patented invention in our business and our obligation to pay a substantial amount for past infringement. If the rights holders are willing to permit us to continue to use their intellectual property rights, it may be necessary for us to enter into license arrangements with unfavorable terms and pay substantial amounts in royalty and other license fees. Either having to cease use or pay such fees could prevent us, or our third-party manufacture, from manufacturing and selling our products, which could make us much less competitive in our industry and have a material adverse impact on our business, operating results and financial condition.

We may become subject to product liability claims.

As a business that manufactures and markets products for use by consumers and institutions, we may become liable for any damage caused by our products, whether used in the manner intended or not. Regardless of merit or potential outcome, product liability claims against us may result in, among other effects, the inability to commercialize our products, impairment of our business reputation, and distraction of management’s attention from our primary business. If we cannot successfully defend ourselves against product liability claims we could incur substantial liabilities. Although we maintain general and product liability insurance, our insurance may not cover potential claims and may not be adequate to indemnify for liabilities that may be imposed. Any imposition of liability that is not covered by insurance or is in excess of insurance coverage could harm our business and operating results.

Litigation or the actions of regulatory authorities may harm our business or otherwise distract our management.

Substantial, complex or extended litigation could cause us to incur major expenditures and would distract our management. For example, lawsuits against us or our officers or directors by employees, former employees, stockholders, partners, customers, or others, or actions taken by regulatory authorities, could be very costly and substantially disrupt our business. Such lawsuits and actions are not uncommon, and we may not be able to resolve such disputes or actions on terms favorable to us, and there may not be sufficient capital resources available to defend such actions effectively, or at all.

Maintaining compliance with our obligations as a public company may strain our resources and distract management, and if we do not remain compliant, our stock price may be adversely affected.

Our common stock is registered under the Securities and Exchange Act of 1934, as amended (the “Exchange Act”). It is therefore subject to the information, proxy solicitation, insider trading and other restrictions and requirements of the SEC under the Exchange Act. Both the U.S. Congress and the SEC continue to issue new and proposed rules, and complying with existing and new rules has caused, and will continue to cause, us to devote significant financial and other resources to maintain our status as a public company. These regulatory costs and requirements will continue to increase our losses in future periods, and we expect that an increasing amount of management time and effort will be needed to meet our regulatory obligations. In addition, if we were to list our common stock on a national securities exchange, our administrative costs could increase.  For example, in April 2008, we obtained a listing of our common stock on The NASDAQ Capital Market. Administrative costs significantly increased during the period between September 2011 and September 2012 due to a series of notices and a lengthy appeal process in connection with the potential delisting of our common stock from The NASDAQ Capital Market. However, NASDAQ delisted us and suspended trading in our securities effective with the open of business on Friday, May 17, 2013, and our common stock began trading on the OTCQB marketplace.

Section 404 of the Sarbanes-Oxley Act of 2002 requires that we evaluate our internal control systems and that management report on and attest to the adequacy of our internal controls. Recent SEC pronouncements suggest that in the next several years we may be required to report our financial results using new International Financial Reporting Standards, replacing GAAP, which would require us to make significant investments in training, hiring, consulting and information technology, among other investments. All of these and other reporting requirements and heightened corporate governance obligations that we face, or may face in the future, will further increase the cost to us, perhaps substantially, of remaining compliant with our obligations under the Exchange Act and other applicable laws, including the Sarbanes-Oxley Act and the Dodd-Frank Act of 2010. In order to meet these incremental obligations, we will need to invest in our corporate and accounting infrastructure and systems, and acquire additional services from third party auditors and advisors. As a result of these requirements and investments, we may incur significant additional expenses and may suffer a significant diversion of management’s time. There is no guarantee that we will be able to continue to meet these obligations in a timely manner. If we fail to do so, we could be subject to sanctions or investigation by regulatory authorities such as the SEC. Any such actions could adversely affect the market price of our common stock, perhaps significantly.

Our publicly filed reports are reviewed from time to time by the SEC, and any significant changes or amendments required as a result of any such review may result in material liability to us and may have a material adverse impact on the trading price of our common stock.

The reports and other securities filings of publicly traded companies are subject to review by the SEC from time to time for the purpose of assisting companies in complying with applicable disclosure requirements. The SEC is required, pursuant to the Sarbanes-Oxley Act of 2002, to undertake a comprehensive review of a company’s reports at least once every three years, although an SEC review may be initiated at any time. While we believe that our previously filed SEC reports comply, and we intend that all future reports will comply, in all material respects with the published rules and regulations of the SEC, we could be required to modify, amend or reformulate information contained in our filings as a result of any SEC review. Any modification, amendment or reformulation of information contained in such reports could be significant and result in material liability to us and have a material adverse impact on the trading price of our common stock.

We depend on key personnel for our continued operations and future success, and a loss of certain key personnel could significantly hinder our ability to move forward with our business plan.

Our success depends largely on the execution of our business strategy by our management team. Management will be evaluating how to best execute our near-term strategy to drive customer adoption in the food industry by addressing food safety solutions across the supply chain in order to prevent or mitigate food contamination or the potential for food-borne illness – with specific customer focus in foodservice providers, food processors and food manufacturers.  Our executive officers and key personnel could terminate their employment with us at any time without notice and without penalty.  For example, effective July 31, 2015, Peter C. Wulff resigned as our Chief Financial Officer, Chief Operating Officer, and Corporate Secretary. Additionally, we do not maintain key person life insurance policies on our executive officers or other employees. The loss of one or more of our executive officers or key employees could seriously harm our ability to execute on our business strategy, which could harm our business, results of operations, financial condition, and/or the market price of our common stock. We cannot assure you that in such an event we would be able to recruit qualified personnel able to replace these individuals in a timely manner, or at all, on terms acceptable to either us or to any qualified candidate.  Even if we were able to replace any such individuals in a timely manner, if we are unable to effectively integrate new executive offices or key employees, our operations and prospects could be harmed.

Because competition for highly qualified business development and bioengineering personnel is intense, we may not be able to attract and retain the employees we need to support our potential growth.

To successfully meet our objectives, we must attract and retain highly qualified business development and bioengineering personnel with specialized skill sets focused on the industries in which we compete, or intend to compete. Competition for qualified business development and bioengineering personnel can be intense. Our ability to meet our business development objectives will depend in part on our ability to recruit, train and retain top quality people with advanced skills who understand our technology and business. In addition, it takes time for our new personnel to become productive and to learn our business. If we are unable to hire or retain qualified business development and bioengineering personnel, it will be difficult for us to sell our products or to license our technology or to achieve or maintain regulatory approvals, and we may experience a shortfall in revenue and not achieve our anticipated, or any, growth.

We may engage in strategic transactions that could impact our liquidity, increase our expenses and present significant distractions to our management.

From time to time we may consider engaging in strategic transactions, such as acquisitions of companies, asset purchases and out-licensing or in-licensing of products, product candidates or technologies. Any such transaction may require us to incur non-recurring or other charges, may increase our near and long-term expenditures and may pose significant integration challenges or disrupt our management or business, which could adversely affect our operations and financial results. For example, these transactions may entail numerous operational and financial risks, including, among others, exposure to unknown liabilities, disruption of our business and diversion of our management’s time and attention in order to develop acquired products, product candidates or technologies, difficulty and cost in combining the operations and personnel of any acquired businesses with our operations and personnel, and inability to retain key employees of any acquired businesses. Accordingly, although we may not choose to undertake or may not be able to successfully complete any transactions of the nature described above, any transactions that we do undertake or complete could have a material adverse effect on our business, results of operations, financial condition and prospects.

We may invest or spend our cash in ways with which you may not agree or in ways which may not yield a significant return.

Our management has considerable discretion in the use of our cash. Our cash may be used for purposes that do not increase our operating results or market value. Until the cash is used, it may be placed in investments that do not produce significant income or that may lose value. The failure of our management to invest or spend our cash effectively could result in unfavorable returns and uncertainty about our prospects, each of which could cause the price of our common stock to decline.

We may not be able to utilize all, or any, of our tax net operating loss carry-forwards and our future after-tax earnings, if any, could be reduced.

At July 31, 2015, we had federal and California tax net operating loss carry-forwards of approximately $89.8 million and $77.1 million, respectively. Utilization of these net operating loss carry-forwards may be subject to a substantial annual limitation due to ownership change limitations that may have occurred, including with respect to our recent private placements, or that could occur in the future, as required by Section 382 of the Internal Revenue Code as well as similar state provisions. These ownership changes may limit the amount of net operating loss carry-forwards that can be utilized annually to offset future taxable income and tax, respectively. In general, an ownership change, as defined by Section 382 of the Internal Revenue Code, results from a transaction or series of transactions over a three-year period resulting in an ownership change of more than 50 percentage points of the outstanding stock of a company by certain stockholders or public groups. Since our formation, we have raised capital through the issuance of capital stock on several occasions (both before and after our initial public offering in 1996) which, combined with the purchasing stockholders’ subsequent disposition of those shares, may have resulted in such an ownership change, or could result in an ownership change in the future based upon subsequent disposition. While we believe that we have not experienced an ownership change, the pertinent tax rules related thereto are complex and subject to varying interpretations, and thus the applicable taxing authorities may take an alternative position.

Our current federal tax loss carry-forwards began expiring in the year ended July 31, 2011 and, unless previously utilized, will completely expire in the year ending July 31, 2035. The balance of our current federal net operating loss carry-forwards will expire between July 31, 2019 and July 31, 2035. Our California tax loss carry-forwards will begin to expire in the year ending July 31, 2015, and will completely expire in the year ending July 31, 2035. If we are unable to earn sufficient profits to utilize the carry-forwards by these dates, they will no longer be available to offset future profits, if any.

We are subject to tax audits by various tax authorities in multiple jurisdictions.

From time to time we may be audited by tax authorities to whom we are subject. Any assessment resulting from such audits, if any, could result in material changes to our past or future taxable income, tax payable or deferred tax assets, and could require us to pay penalties and interest that could materially adversely affect our financial results.

Risks Related to Our Intellectual Property

If we are unable to obtain, maintain or defend the patent and other intellectual property rights relating to our technology, we or our collaborators and distributors may not be able to develop and market proprietary products based on our technology, which would have a material adverse impact on our results of operations.

We rely and expect in the future to continue to rely on a combination of patent, trademark, trade secret and copyright protections, as well as contractual restrictions, to protect the proprietary aspects of our technology and business.

Legal protections of our intellectual property and proprietary rights afford only limited protection. For instance, we currently own twelve U.S. patents related to our SDC technology. The lives of these patents, and any patents that we may obtain in the future, are not indefinite, and the value to us of some or all of our patents may be limited by their terms. Further, although we have a number of U.S. and international patent applications pending, some or all of those applications may not result in issued patents, and the intellectual property claims therein would be unprotected. Additionally, obtaining and maintaining patent protection depends on our compliance with various procedural, document submission, fee payment and other requirements imposed by government patent agencies, and our patent protection could be reduced or eliminated for non-compliance with these requirements. Furthermore, the patent positions of bioscience companies can be highly uncertain and often involve complex legal, scientific and factual questions, and, therefore, we cannot predict with certainty whether we will be able to ultimately enforce our patents or other intellectual property rights. Third parties may challenge, invalidate or circumvent our patents and patent applications relating to our products, product candidates and technologies. In addition, our patent positions might not protect us against competitors with similar products or technologies because competing products or technologies may not infringe our patents.

From time to time, U.S. and other policymakers have proposed reforming the patent laws and regulations of their countries. In September 2011, after years of Congressional debate regarding patent reform legislation, President Obama signed into law the America Invents Act (the “Act”) considered by many to be the most substantial revision of U.S. patent law since 1952. The Act’s various provisions will go into effect over an 18-month period. The Act changes the current “first-to-invent” system to a system that awards a patent to the “first-inventor-to-file” for an application for a patentable invention. This change alters the pool of available materials that can be used to challenge patents and eliminates the ability to rely on prior research work in order to lay claim to patent rights. Disputes as to whether the first filer is in fact the true inventor will be resolved through newly implemented derivation proceedings. The Act also creates mechanisms to allow challenges to newly issued patents in the patent office in post-grant proceedings and new inter partes reexamination proceedings. Although many of the changes bring U.S. law into closer harmony with European and other national patent laws, the new bases and procedures may make it easier for competitors to challenge our patents, which could result in increased competition and have a material adverse effect on our product sales, business and results of operations. The changes may also make it harder to challenge third-party patents and place greater importance on being the first inventor to file a patent application on an invention.

In addition, to the extent that we operate internationally, the laws of foreign countries may not protect our proprietary rights to the same extent as the laws of the U.S. Many countries have a “first-to-file” trademark registration system, which may prevent us from registering or using our trademarks in certain countries if third parties have previously filed applications to register or have registered the same or similar trademarks. Additionally, changes in the patent and/or trademark laws or interpretations of such laws in the U.S. or other countries could diminish the value of our intellectual property rights. Moreover, our competitors may develop competing technologies that are not covered by the claims of, and therefore do not infringe upon, our issued patents, which could render our patents less valuable to us. If certain of our proprietary rights cannot be, or are not sufficiently, protected by patent and trademark registrations, it could have a material adverse impact on our business and our ability to commercialize or license our technology and products.

Our own efforts to protect our intellectual property and other proprietary rights may also be insufficient. Despite efforts to protect our proprietary rights, including without limitation through confidentiality and other similar contractual restrictions, our means of protecting such rights may not be adequate and unauthorized parties may attempt to copy aspects of our proprietary technology, obtain and use information that we regard as proprietary, or otherwise misappropriate our intellectual property. In addition, unpatented proprietary rights, including trade secrets and know-how, can be difficult to protect and may lose their value if they are independently developed by a third party or if their secrecy is lost. It is possible that, despite our efforts, competitors or others will create and use products, adopt service names similar to our service names or otherwise violate or misappropriate our proprietary rights. The infringement of such rights could have a material negative impact on our business and on our results of operations.

Litigation may be necessary to enforce our intellectual property and other proprietary rights, which would be expensive and could consume time and other resources. The result of any such litigation may be the court’s ruling that our patents or other intellectual property rights are invalid and/or should not be enforced. Additionally, even if the validity of such rights is upheld, the court could refuse to stop a third party’s infringing activity on the ground that such activities do not infringe our rights. The U.S. Supreme Court has recently revised certain tests regarding granting patents and assessing the validity of patents to make it more difficult to obtain patents. As a consequence, issued patents may be found to contain invalid claims according to the newly revised standards. Some of our patents may be subject to challenge and subsequent invalidation or significant narrowing of claim scope in a reexamination proceeding, or during litigation, under the revised criteria.

We may incur substantial costs as a result of litigation or other proceedings relating to patent and other intellectual property rights and we may be unable to protect our rights to, or use, our technology.

If we choose to go to court to stop someone else from using the inventions claimed in our patents, that individual or company has the right to ask the court to rule that these patents are invalid and/or should not be enforced against that third party. These lawsuits are expensive and would consume time and other resources even if we were successful in stopping the infringement of these patents. In addition, there is a risk that the court will decide that these patents are not valid and that we do not have the right to stop the other party from using the inventions. There is also the risk that, even if the validity of these patents is upheld, the court will refuse to stop the other party on the ground that such other party’s activities do not infringe our rights to these patents.

Furthermore, a third party may claim that we are using inventions covered by the third party’s patent rights and may file an injunction to stop us from engaging in our normal operations and activities, including making or selling our products. These lawsuits are costly and could affect our results of operations and divert the attention of managerial and technical personnel. There is a risk that a court would decide that we are infringing the third party’s patents and would order us to stop the activities covered by the patents. In addition, there is a risk that a court will order us to pay the other party damages for having violated the other party’s patents. The biotechnology industry has produced a proliferation of patents, and it is not always clear to industry participants, including us, which patents cover various types of products or methods of use. The coverage of patents is subject to interpretation by the courts, and the interpretation is not always uniform. If we are sued for patent infringement, we would need to demonstrate that our products or methods of use either do not infringe the patent claims of the relevant patent and/or that the patent claims are invalid, and we may not be able to do this. Proving invalidity, in particular, is difficult since it requires a showing of clear and convincing evidence to overcome the presumption of validity enjoyed by issued patents.

Because some patent applications in the United States may be maintained in secrecy until the patents are issued, patent applications in the United States and many foreign jurisdictions are typically not published until eighteen months after filing, and publications in the scientific literature often lag behind actual discoveries, we cannot be certain that others have not filed patent applications for technology covered by our issued patents or our pending applications or that we were the first to invent the technology. Our competitors may have filed, and may in the future file, patent applications covering technology similar to ours. Any such patent application may have priority over our patent applications and could further require us to obtain rights to issued patents covering such technologies. If another party has filed a United States patent application on inventions similar to ours, we may have to participate in an interference proceeding declared by the PTO, to determine priority of invention in the United States. The costs of these proceedings could be substantial, and it is possible that such efforts would be unsuccessful, resulting in a loss of our United States patent position with respect to such inventions.

Some of our competitors may be able to sustain the costs of complex patent litigation more effectively than we can because they have substantially greater resources. In addition, any uncertainties resulting from the initiation and continuation of any litigation could have a material adverse effect on our ability to raise the funds necessary to continue our operations.

 

Confidentiality agreements with employees and others may not adequately prevent disclosure of our trade secrets and other proprietary information and may not adequately protect our intellectual property, which could limit our ability to compete.

We may rely in part on trade secret protection in order to protect our proprietary trade secrets and unpatented know-how. However, trade secrets are difficult to protect, and we cannot be certain that others will not develop the same or similar technologies on their own. We have taken steps, including entering into confidentiality agreements with our employees, consultants, outside scientific collaborators, sponsored researchers and other advisors, to protect our trade secrets and unpatented know-how. These agreements generally require that the other party keep confidential and not disclose to third parties all confidential information developed by the party or made known to the party by us during the course of the party’s relationship with us. We also typically obtain agreements from these parties which provide that inventions conceived by the party in the course of rendering services to us will be our exclusive property. However, these agreements may not be honored and may not effectively assign intellectual property rights to us. Enforcing a claim that a party illegally obtained and is using our trade secrets or know-how is difficult, expensive and time consuming, and the outcome is unpredictable. In addition, courts outside the United States may be less willing to protect trade secrets or know-how. The failure to obtain or maintain trade secret protection could adversely affect our competitive position.

We may be subject to claims that our employees have wrongfully used or disclosed alleged trade secrets of their former employers.

As is common in the biotechnology, food, chemical and pharmaceutical industries, we employ individuals who were previously employed at other biotechnology, food, chemical or pharmaceutical companies, including our competitors or potential competitors. Although no claims against us are currently pending, we may be subject to claims that these employees or we have inadvertently or otherwise used or disclosed trade secrets or other proprietary information of their

former employers. Litigation may be necessary to defend against these claims. Even if we are successful in defending against these claims, litigation could result in substantial costs and be a distraction to management.

Risks Related to our Common Stock

The price of our common stock may be volatile.  

Our common stock is approved for quotation on the OTC Markets’ OTCQB marketplace under the symbol “PURE.” The OTCQB is a regulated quotation service that displays real-time quotes, last-sale prices and volume information in over-the-counter equity securities and provides significantly less liquidity than a listing on the Nasdaq Stock Markets or other national securities exchange. The OTCQB securities are traded by a community of market makers that enter quotes and trade reports. This market is limited in comparison to the national stock exchanges and any prices quoted may not be a reliable indication of the value of our common stock.  Quotes for stocks included on the OTCBB are not listed in the financial sections of newspapers as are those for the Nasdaq Stock Market or the NYSE. Therefore, prices for securities traded solely on the OTCBB may be difficult to obtain.

Trading on the OTCQB Marketplace as opposed to a national securities exchange has resulted and may continue to result in a reduction in some or all of the following, each of which could have a material adverse effect on the price of our common stock and our company:

In addition, the market price of our common stock could be subject to wide fluctuations in response to:

Our common stock is deemed to be “penny stock,” which may make it more difficult for investors to sell their shares due to suitability requirements.

Shares of our common stock are subject to the so-called “penny stock” rules as that term is defined in Rule 3a51-1 promulgated under the Securities Exchange Act of 1934. These requirements may reduce the potential market for our common stock by reducing the number of potential investors. This may make it more difficult for investors in our common stock to sell shares to third parties or to otherwise dispose of them. This could cause our stock price to decline.

Broker-dealers dealing in penny stocks are required to provide potential investors with a document disclosing the risks of penny stock. Moreover, broker-dealers are required to determine whether an investment in a penny stock is a suitable investment for a prospective investor. Such requirements may discourage broker-dealers from effecting transactions in our common stock, which could limit the market price and liquidity of our common stock.

The price of our common stock may be volatile, which may cause investment losses for our stockholders.

The price and trading volume of our common stock have historically been volatile. For example, in the twelve months through July 31, 2015, the closing market price of our common stock ranged from $0.45 per share to $1.18 per share, and the monthly trading volume varied from approximately 395,000 shares to 2,195,000 shares. The market price of our common stock may continue to be volatile and could fluctuate substantially due to many factors, including, among others, the following:

In addition, the stock market in general, the OTCQB, and the market for shares of novel technology and biotechnology companies in particular, have experienced extreme price and volume fluctuations that in some cases may be unrelated or disproportionate to the operating performance of those companies. Further, the market prices of bioscience companies’ stock have been unusually volatile in recent periods, and such volatility may continue for the foreseeable future. These broad market and industry factors may materially harm the market price of our common stock, regardless of our operating performance. In addition, this volatility could adversely affect an investor’s ability to sell shares of our common stock, and/or the available price for such shares, at any given time.

Following periods of volatility in the market price of a company’s securities, stockholder derivative lawsuits and securities class action litigation are common. Such litigation, if instituted against us or our officers and directors, could result in substantial costs and a diversion of management’s attention and resources.

Potential  sales or issuances of our common stock to raise capital, or the perception that such sales could occur, could cause dilution to our current stockholders and the price of our common stock to fall.

We have historically supported our operations through the issuance of equity and expect to continue to do so in the future. For example, on October 23, 2015, we closed on a private placement of 13,333,333 shares of common stock and warrants to purchase 15,333,333 shares of common stock for aggregate gross proceeds of $6,000,000. Although we may not be successful in obtaining financing through equity sales on terms that are favorable to us in the future, if at all, any such sales that do occur could result in substantial dilution to the interests of existing holders of our common stock. Additionally, the sale of a substantial number of shares of our common stock or other equity securities to any new investors, or the anticipation of such sales, could cause the trading price of our common stock to fall. 

 

We have never paid dividends on our capital stock, and we do not anticipate paying any cash dividends in the foreseeable future.

The continued operation and expansion of our business will require substantial funding. Investors seeking cash dividends in the foreseeable future should not purchase our common stock. We have paid no cash dividends on any of our capital stock to date and we currently intend to retain our available cash to fund the development and growth of our business. Any determination to pay dividends in the future will be at the discretion of our Board and will depend upon results of operations, financial condition, contractual restrictions, restrictions imposed by applicable law and other factors our Board deems relevant. We do not anticipate paying any cash dividends on our common stock in the foreseeable future. Any return to stockholders will therefore be limited to the appreciation of their stock, which may never occur.

Anti-takeover provisions under our charter documents and Delaware law could delay or prevent a change of control and could also limit the market price of our stock.

Certain provisions of our charter and bylaws may delay or frustrate the removal of incumbent directors and may prevent or delay a merger, tender offer, or proxy contest involving us that is not approved by our Board, even if such events may be beneficial to the interests of stockholders. For example, our Board, without stockholder approval, has the authority and power to authorize the issuance of up to 5,000,000 shares of preferred stock and such preferred stock could have voting or conversion rights that could adversely affect the voting power of the holders of our common stock. Further, the one-for-eight reverse stock split of our outstanding common stock that we effected on August 14, 2012 has increased the proportion of unissued and authorized common shares to issued and outstanding common shares, which could allow our Board to issue large numbers of additional shares of our common stock that could significantly reduce the voting power of our current stockholders. In addition, we are governed by the provisions of Section 203 of the Delaware General Corporation Law, which may discourage, delay or prevent certain business combinations with stockholders owning 15% or more of our outstanding voting stock. These and other provisions in our charter documents may make it more difficult for stockholders or potential acquirers to initiate actions that are opposed by our then-current board of directors, including delaying or impeding a merger, tender offer, or proxy contest or other change of control transaction involving the Company. Any delay or prevention of a change of control transaction could cause stockholders to lose a substantial premium over the then-current market price of their shares.

 

Item 1B.  Unresolved Staff Comments  

None.

Item 2.  Properties

We lease a facility in El Cajon, California covering a total of approximately 7,400 square feet. This is our only facility and it includes our corporate offices, research and development laboratory and warehouse. Our current lease on this facility expires in December 2016.

Item 3.  Legal Proceedings

From time to time, we may become involved in various lawsuits and legal proceedings which arise in the ordinary course of business. The impact and outcome of litigation, if any, is subject to inherent uncertainties, and an adverse result in these or other matters may arise from time to time that may harm our business. We are not currently aware of any such legal proceedings or claims to which we or our wholly owned subsidiary is a party or of which any of our property is subject that we believe will have, individually or in the aggregate, a material adverse effect on our business, financial condition or results of operations.

Item 4.  Mine Safety Disclosures

Not applicable.

 

 

PART II

Item 5.  Market for the Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Information About Our Common Stock

Our common stock is approved for quotation on the OTC Markets’ OTCQB marketplace under the symbol “PURE.” The OTCQB is a regulated quotation service that displays real-time quotes, last-sale prices and volume information in over-the-counter equity securities. The OTCQB securities are traded by a community of market makers that enter quotes and trade reports. This market is limited in comparison to the national stock exchanges and any prices quoted may not be a reliable indication of the value of our common stock.

On October 26, 2015, the closing price of our common stock reported on the OTCQB was $0.70 per share. The following table sets forth, for each of the quarterly periods indicated, the high and low sales prices of our common stock, as reported on the OTCQB.

 

 

 

 

Holders

As of October 26, 2015, we had approximately 244 holders of record of our common stock. This does not include beneficial owners holding common stock in street name.

Dividend Policy

We have never paid dividends and have no current plans to do so. We currently anticipate that we will retain all of our future earnings, if any, for use in the development and expansion of our business and for general corporate purposes. Any determination to pay dividends in the future will be at the discretion of our Board and will depend upon our results of operations, financial condition and other factors that the Board, in its discretion, may deem relevant.

Repurchase of Equity Securities

None.

Information About Our Equity Compensation Plans

The information required under this heading is incorporated herein by reference to the applicable information set forth in Item 12 of this Annual Report on Form 10-K.

 

Item 6.  Selected Financial Data

As a Smaller Reporting Company, as defined by Rule 12b-2 of the Exchange Act and in Item 10(f)(1) of Regulation S-K, we are electing scaled disclosure reporting obligations and therefore are not required to provide the information requested by this Item.

Item 7.   Management’s Discussion and Analysis of Financial Condition and Results of Operations  

All references to “PURE,” “we,” “our,” “us” and the “Company” in this Item 7 refer to PURE Bioscience, Inc. and our wholly owned subsidiary.

The discussion in this section contains forward-looking statements. These statements relate to future events or our future financial performance. We have attempted to identify forward-looking statements by terminology such as “anticipate,” “believe,” “can,” “continue,” “could,” “estimate,” “expect,” “intend,” “may,” “plan,” “potential,” “predict,” “should,” “would” or “will” or the negative of these terms or other comparable terminology, but their absence does not mean that a statement is not forward-looking. These statements are only predictions and involve known and unknown risks, uncertainties and other factors, which could cause our actual results to differ from those projected in any forward-looking statements we make. Several risks and uncertainties we face are discussed in more detail under “Risk Factors” in Part I, Item 1A of this Annual Report or in the discussion and analysis below. You should, however, understand that it is not possible to predict or identify all risks and uncertainties and you should not consider the risks and uncertainties identified by us to be a complete set of all potential risks or uncertainties that could materially affect us. You should not place undue reliance on the forward-looking statements we make herein because some or all of them may turn out to be wrong. We undertake no obligation to update any of the forward-looking statements contained herein to reflect future events and developments, except as required by law. The following discussion should be read in conjunction with the consolidated financial statements and the notes to those statements included elsewhere in this Annual Report on Form 10-K.

Overview

We are focused on developing and commercializing proprietary antimicrobial products that provide safe and cost-effective solutions to the health and environmental challenges of pathogen and hygienic control.  Our technology platform is based on patented stabilized ionic silver, and our initial products contain silver dihydrogen citrate, or SDC.  SDC is a broad-spectrum, non-toxic antimicrobial agent, which offers 24-hour residual protection and formulates well with other compounds. As a platform technology, we believe SDC is distinguished from existing products in the marketplace because of its superior efficacy, reduced toxicity and the inability of bacteria to form a resistance to it.

Our SDC-based technology platform has potential application in a number of industries.  Our near-term focus is on offering products that address food safety risks across the food industry supply chain.  In 2011, the Centers for Disease Control and Prevention (CDC) reported that foodborne illnesses affect more than 48 million people annually in the U.S., causing 128,000 hospitalizations and 3,000 fatalities. The CDC estimated that more than 9 million of these foodborne illnesses were attributed to major pathogens.  The CDC reported that contaminated produce was responsible for approximately 46% of the foodborne illnesses caused by pathogens and 23% of the foodborne illness-related deaths in the US between 1998 and 2008.  Among the top pathogens contributing to foodborne illness in the U.S. are Norovirus, Salmonella,  Campylobacter,  Staphylococcus, Shiga toxin–producing Escherichia coli and Listeria.  Salmonella is the leading cause of hospitalization, followed by Norovirus, and is the leading cause of deaths related to foodborne illness. 

Based on these statistics, we believe there is a significant market opportunity for our safe, non-toxic and effective SDC-based solutions.  We currently offer PURE® Hard Surface as a food contact surface sanitizer and disinfectant to restaurant chains and food processors.  One of our customers is SUBWAY® Restaurants, which has approved PURE Hard Surface for use system-wide (27,000 U.S. stores).  We also intend to offer PURE Control® as a  direct food contact processing aid upon our receipt of the required approvals from the FDA and USDA.  We anticipate receiving the required approvals to market PURE Control as a direct food contact processing aid for raw poultry and fresh produce during the first calendar quarter of 2016.  We are currently testing and continuing development of PURE Control to allow us to seek regulatory approval to utilize PURE Control as a direct food contact processing aid for raw meats, including beef and pork.  In addition to our direct sales efforts with PURE Hard Surface and PURE Control, we market and sell our SDC-based products indirectly through third-party distributors.

Recent Corporate Developments

Effective July 31, 2015, Peter C. Wulff resigned his position as Chief Financial Officer, Chief Operating Officer and Corporate Secretary.  There were no disagreements between Mr. Wulff and the Company.

Effective July 31, 2015, the Board appointed Mark Elliott as the Company's Vice President, Finance. Mr. Elliott will also serve as the Company's Principal Financial Officer and Principal Accounting Officer. Mr. Elliott previously served as the Company's Controller.

Financial Overview

This financial overview provides a general description of our revenue and expenses.

Net Product Sales

We manufacture and sell SDC-based products for end use, and as a raw material for manufacturing use. We also license our products and technology to development and commercialization partners. Revenue is recognized when realized or realizable and earned. Any amounts received prior to satisfying revenue recognition criteria are recorded as deferred revenue. See “Critical Accounting Policies and Estimates – Revenue Recognition”.

Cost of Goods Sold

Cost of goods sold for product sales includes direct and indirect costs to manufacture products, including materials consumed, manufacturing overhead, shipping costs, salaries, benefits, reserved inventory, and related expenses of operations. Depreciation related to manufacturing is systematically allocated to inventory produced, and expensed through cost of goods sold at the time inventory is sold.

Selling, General and Administrative

Selling, general and administrative expense consists primarily of salaries and other related costs for personnel in business development, sales, finance, accounting, information technology, and executive functions. Other selling, general and administrative costs include product marketing, advertising, and trade show costs, as well as public relations and investor relations, facility costs, and legal, accounting and other professional fees.

Research and Development

Our research and development activities are focused on leveraging our technology platform to develop additional proprietary products and applications. Research and development expense consists primarily of personnel and related costs, product registration expenses, and third-party testing. We expense research and development costs as incurred.

Other Income (Expense)

We record interest income, interest expense, change in derivative liabilities, as well as other non-operating transactions, as other income (expense) in our consolidated statements of operations.

 

Results of Operations – Comparison of the Years Ended July 31, 2015 and 2014

Fluctuations in Operating Results

Our results of operations have fluctuated significantly from period to period in the past and are likely to continue to do so in the future. We anticipate that our results of operations will be affected for the foreseeable future by several factors that may contribute to these periodic fluctuations, including fluctuations in the buying patterns of our current or potential customers for which we have no visibility, the mix of product sales including a change in the percentage of higher or lower margin formulations and packaging configurations of our products, the cost of product sales including component costs and contract labor as needed to meet fluctuations in demand not supportable by our existing workforce, our inability for any reason to be able to meet demand, the achievement and timing of research and development and regulatory milestones, unforeseen changes in expenses, including non-cash expenses such as the fair value of stock options granted, the calculation of which includes several variable assumptions, and unforeseen manufacturing or supply issues, among other issues. Due to these fluctuations, we believe that the period-to-period comparisons of our operating

results are not a reliable indication of our future performance. As of the date of this filing, other than the impact of our change in corporate strategy, we are not aware of any trends in these factors or events or conditions that we believe are reasonably likely to impact our results of operations in the future.

Net Product Sales

Net product sales were $729,000 and $550,000 for the years ended July 31, 2015 and 2014, respectively. The increase of $179,000 was primarily attributable to new customer sales in the food safety industry, as well as sales fluctuations within our existing legacy customer base. Our top three customers accounted for $464,000 of net product sales for the year ended July 31, 2015.

For the year ended July 31, 2015, one legacy customer accounted for 47% of our net product sales. No other individual customer accounted for 10% or more of our net product sales. The geographic breakdown of net product sales was as follows: 97% U.S., and 3% foreign.

For the year ended July 31, 2014, two individual customers accounted for 66% of our net product sales. No other individual customer accounted for 10% or more of our net product sales. The geographic breakdown of net product sales was as follows: 100% U.S.

Cost of Goods Sold

During the fiscal year ended July 31, 2014, we established an inventory reserve of $128,000 for slow moving finished goods inventory that was manufactured in prior years. The majority of the reserve related to components such as, plastic bottles, spray triggers, miscellaneous plastics, and numerous corrugated cardboard configurations.

Cost of goods sold was $285,000 and $344,000 for the years ended July 31, 2015 and 2014, respectively. Cost of goods sold, excluding the inventory reserves discussed above, was $285,000 and $216,000 for the years ended July 31, 2015 and 2014, respectively. The increase of $69,000 is primarily attributable to increased net product sales.

Gross margin, as a percentage of net product sales, or gross margin percentage, was 61% and 37% for the years ended July 31, 2015 and 2014, respectively. Gross margin percentage, excluding the reserve discussed above, was 61% for the year ended July 31, 2015, unchanged from the prior year.

Selling, General and Administrative Expense

Selling, general and administrative expense was $4,912,000 and $5,056,000 for the years ended July 31, 2015 and 2014, respectively. The decrease of $144,000 was primarily attributable to reductions in professional services and facility costs, offset by increased Board fees, personnel costs, and travel expense.

Research and Development Expense

Research and development expense was $790,000 and $1,032,000 for the years ended July 31, 2015 and 2014, respectively. The decrease of $242,000 was primarily attributable to decreases in personnel and related costs.

Share-Based Compensation

Share-based compensation expense was $2,382,000 and $2,958,000 for the years ended July 31, 2015 and 2014, respectively. The decrease of $576,000 is primarily due to the vesting of restricted stock units granted to employees and directors supporting our selling, general and administrative, and research and development functions during the prior fiscal year. See Note 9 to the consolidated financial statements.  

 

Other Share-Based Expenses

Other share-based expense was zero and $308,000 for the years ended July 31, 2015 and 2014, respectively. During the fiscal year ended July 31, 2014, we recognized $285,000 of expense incurred from the amendment of the subscription

agreements for investors who participated in the October 2013 private placements and $23,000 of expense associated with warrants issued in connection with the April 24, 2013 private placement. See Note 8 to the consolidated financial statements.  

Restructuring Costs

Restructuring expense was zero and $2,754,000 for the years ended July 31, 2015 and 2014, respectively. On August 13, 2013, Michael L. Krall, Donna Singer, and Dennis Brovarone resigned all positions respectively held by them as officers and directors of the Company and a new management team and Board were appointed. Based on the corporate governance change we incurred the following expenditures:

In addition, on January 23, 2014, we entered into a settlement agreement with a former employee. Under the terms of the agreement, we paid $50,000 over a six-month period with payments commencing in March 2014, and issued 15,000 shares of common stock valued at $20,000.

Change in Derivative Liability

Change in derivative liability for the years ended July 31, 2015 and 2014 was a decrease of $5,000 and an increase of $55,000, respectively. The change is primarily due to adjustments of the estimated fair value, and the settlement of derivative warrants exercised during the year ended July 31, 2014.  See Note 5 to the consolidated financial statements.  

Interest Expense, net

Interest expense for the years ended July 31, 2015 and 2014 was $8,000 and $10,000, respectively.

Gain on Extinguishment of Debt

Gain on extinguishment of debt for the year ended July 31, 2015 and 2014 was zero and $727,000, respectively. The $727,000 gain is attributable to the repayment of a promissory note.  See Note 4 to the consolidated financial statements.  

 

Other (Expense) Income, net

Other income for the year ended July 31, 2015 was $16,000 compared with other expense of $190,000 for year ended July 31, 2014. The decrease of $174,000 is primarily attributable to the sale of reserved inventory and accounts payable vendor settlements that occurred during the prior year.

Liquidity and Capital Resources

Since our inception, we have financed our operations primarily through public and private offerings of securities, debt financing, and revenue from product sales and license agreements. We have a history of recurring losses, and as of July 31, 2015, we have incurred a cumulative net loss of $88,848,000.

For the year ended July 31, 2015, we issued a total of 10,086,025 shares of common stock for gross proceeds of $7,493,000. After deducting fees of $92,000, the net proceeds to us were $7,401,000. 

As of July 31, 2015, we had $1,321,000 in cash and cash equivalents compared to $86,000 in cash and cash equivalents as of July 31, 2014. Additionally, as of July 31, 2015, we had $869,000 of current liabilities, including $560,000 in accounts payable, compared to $1,829,000 of current liabilities, including $1,096,000 in accounts payable as of July 31, 2014. The net decrease in current liabilities primarily relates to the timing of accounts payable, reduced wage accruals, and repayment of severance obligations to Mr. Krall and Ms. Singer. Included in current liabilities at July 31, 2015 is $292,000 of compensation due to our Board and officers.

On October 23, 2015, we raised $6 million in a private placement financing of common stock and warrants to purchase common stock from Franchise Brands, LLC.  See Note 13 to the consolidated financial statements.  Therefore, as of October 28, 2015, we believe that our current cash resources are sufficient to meet our anticipated needs during the next twelve months. 

The following table summarizes our contractual obligations as of July 31, 2015.

 

 

 

In addition, from time to time we have entered into employment agreements with our executives that, under certain cases, provide for the continuation of salary and certain other benefits if these executives are terminated under specified circumstances. These agreements generally expire upon termination for cause or when we have met our obligations under these agreements. As of July 31, 2015, no events have occurred resulting in the obligation of any such payments. On August 13, 2013, we entered into Purchase, Severance, and Release Agreements with our named executive officers, which is further described in Item 11 to this Annual Report and Note 7 to the audited consolidated financial statements set forth in Part II, Item 8 of this Annual Report.

Our future capital requirements depend on numerous forward-looking factors. These factors may include, but are not limited to, the following: the acceptance of, and demand for, our products; our success and the success of our partners in selling our products; our success and the success of our partners in obtaining regulatory approvals to sell our products; the costs of further developing our existing products and technologies; the extent to which we invest in new product and technology development; and the costs associated with the continued operation, and any future growth, of our business. The outcome of these and other forward-looking factors will substantially affect our liquidity and capital resources.

We expect that we will need to increase our liquidity and capital resources by one or more measures. These measures may include, but are not limited to, the following: reducing operating expenses; obtaining financing through the issuance of equity, debt, or convertible securities; entering into partnerships, licenses, or other arrangements with third parties; and reducing the exercise price of outstanding warrants. Any one of these measures could substantially reduce the value to us of our technology and its commercial potential as it may be necessary to enter into arrangements with less favorable

terms than otherwise possible. Additionally, a reduction in operating expenses will require a reduction in the sales, marketing, and other commercialization activities required to bring our products to market. If we issue equity, debt or convertible securities to raise additional funds, our existing stockholders may experience dilution, and the new equity, debt or convertible securities may have rights, preferences and privileges senior to those of our existing stockholders. There is no guarantee that we would be able to obtain capital on terms acceptable to us, or at all.

If we are unable to obtain sufficient capital, it would have a material adverse effect on our business and operations. It could cause us to fail to execute our business plan, fail to take advantage of future opportunities, or fail to respond to competitive pressures or customer requirements. It also may require us to delay, scale back or eliminate some or all of our research and development programs, to license to third parties the right to commercialize products or technologies that we would otherwise commercialize ourselves, or to reduce or cease operations altogether. If adequate funds are not available when needed, we may be required to significantly modify our business model and operations to reduce spending to a sustainable level.

We believe our current efforts to raise capital, our current efforts to market and sell our products, and our ability to significantly reduce expenses, will provide sufficient cash resources to satisfy our needs over the next 12 months. However, we do not yet have, and we may never have, significant cash inflows from product sales or from other sources of revenue to offset our ongoing and planned investments in corporate infrastructure, research and development projects, regulatory submissions, business development initiatives, and sales and marketing activities, among other investments. Some or all of our ongoing or planned investments may not be successful and could result in further losses. In addition, irrespective of our cash resources, we may be contractually or legally obligated to make certain investments which cannot be postponed.

Critical Accounting Policies and Estimates

The discussion and analysis of our financial condition and results of operations are based on our audited consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States, or GAAP. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues, expenses, and related disclosures. We evaluate our estimates on an ongoing basis. We base our estimates on historical experience and on other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

We believe the following accounting policies and estimates are critical to aid you in understanding and evaluating our reported financial results.

Revenue Recognition

We sell our products to distributors and end users. We record net sales when we sell products to our customers, rather than when our customers resell products to third parties. When we sell products to our customers, we reduce the balance of our inventory with a corresponding charge to cost of goods sold. We do not currently have any consignment sales.

Terms of our product sales are generally FOB shipping point. Net sales are recognized when delivery of the products has occurred (which is generally at the time of shipment), title has passed to the customer, the selling price is fixed or determinable, collectability is reasonably assured and we have no further obligations. Any amounts received prior to satisfying these revenue recognition criteria are recorded as deferred revenue. We record net sales net of discounts at the time of sale and report net sales net of such discounts.

We also license our products and technology to development and commercialization partners. License fee revenue consists of product and technology license fees earned. If multiple-element arrangements require on-going services or performance, then upfront product and technology license fees under such arrangements are deferred and recognized over the period of such services or performance. Non-refundable amounts received for substantive milestones are recognized upon achievement of the milestone. Any amounts received prior to satisfying these revenue recognition criteria are recorded as deferred revenue.

Share-Based Compensation

We grant equity-based awards under share-based compensation plans. We estimate the fair value of share-based payment awards using the Black-Scholes option valuation model. This fair value is then amortized over the requisite service periods of the awards. The Black-Scholes option valuation model requires the input of subjective assumptions, including price volatility of the underlying stock, risk-free interest rate, dividend yield, and expected life of the option. Share-based compensation expense is based on awards ultimately expected to vest, and therefore is reduced by expected forfeitures. Changes in assumptions used under the Black-Scholes option valuation model could materially affect our net loss and net loss per share.

Impairment of Long-Lived Assets

In accordance with GAAP, if indicators of impairment exist, we assess the recoverability of the affected long-lived assets by determining whether the carrying value of such assets can be recovered through undiscounted future operating cash flows. If impairment is indicated, we measure the amount of such impairment by comparing the carrying value of the asset to the fair value of the asset and we record the impairment as a reduction in the carrying value of the related asset and a charge to operating results. Estimating the undiscounted future cash flows associated with long-lived assets requires judgment, and assumptions could differ materially from actual results. No impairment expense was recorded during the year ended July 31, 2015 and 2014.  

For purposes of testing impairment, we group our long-lived assets at the lowest level for which there are identifiable cash flows independent of other asset groups. Currently, there is only one level of aggregation for our intangible assets. We assess the impairment of long-lived assets, consisting of property, plant, equipment and finite-lived intangible assets primarily consisting of the worldwide patent portfolio of our silver ion technologies, annually, or whenever events or circumstances indicate that the carrying value may not be recoverable. Examples of such events or circumstances include:

Additionally, on a quarterly basis we review the significant assumptions underlying our impairment assessment to determine that our previous conclusions remain valid. As part of our review, we consider changes in revenue growth rates, operating margins, working capital needs and other expenditures. With the exception of the impairment discussed above we have not identified any asset groups where undiscounted cash flows were not substantially in excess of carrying value.

Recoverability of assets to be held and used in operations is measured by a comparison of the carrying amount of an asset to the future net cash flows expected to be generated by the assets. The factors used to evaluate the future net cash flows, while reasonable, require a high degree of judgment and the results could vary if the actual results are materially different than the forecasts. In addition, we base useful lives and amortization or depreciation expense on our subjective estimate of the period that the assets will generate revenue or otherwise be used by us. If such assets are considered to be impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the assets exceeds the fair value of the assets. Assets to be disposed of are reported at the lower of the carrying amount or fair value less selling costs.

We also periodically review the lives assigned to our intangible assets to ensure that our initial estimates do not exceed any revised estimated periods from which we expect to realize cash flows from the technologies. If a change were to occur in any of the above-mentioned factors or estimates, the likelihood of a material change in our reported results would increase.

Derivative Financial Instruments

We do not use derivative instruments to hedge exposures to cash flow or market or foreign currency risks.

We review the terms of the common stock, warrants and convertible debt we issue to determine whether there are derivative instruments, including embedded conversion options that are required to be bifurcated and accounted for separately as derivative financial instruments. In circumstances where the host instrument contains more than one embedded derivative instrument, including a conversion option, that is required to be bifurcated, the bifurcated derivative instruments are accounted for as a single, compound derivative instrument.

Derivatives are initially recorded at fair value and are then revalued at each reporting date with changes in the fair value reported as non-operating income or expense. When the equity or convertible debt instruments contain embedded derivative instruments that are to be bifurcated and accounted for as liabilities, the total proceeds received are first allocated to the fair value of all the bifurcated derivative instruments. The remaining proceeds, if any, are then allocated to the host instruments themselves, usually resulting in those instruments being recorded at a discount from their face value.

Recent Accounting Pronouncements

Information regarding recent accounting pronouncements is contained in Note 2 to the Consolidated Financial Statements, included elsewhere in this report.

Off Balance Sheet Arrangements

We do not have any off balance sheet arrangements.

Item 7A.   Quantitative and Qualitative Disclosures About Market Risk

As a Smaller Reporting Company as defined by Rule 12b-2 of the Exchange Act and in Item 10(f)(1) of Regulation S-K, we are electing scaled disclosure reporting obligations and therefore are not required to provide the information requested by this Item.

Item 8.  Consolidated Financial Statements and Supplementary Data

The consolidated financial statements and supplementary data required by this Item 8 are set forth at the end of this Annual Report.

Item 9.  Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

Not applicable.

Item 9A.  Controls and Procedures

Evaluation of Disclosure Controls and Procedures

We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in our Exchange Act reports is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms, and that such information is accumulated and communicated to our management, including our Principal Executive Officer and Principal Financial Officer, as appropriate, to allow timely decisions regarding required disclosure. In designing and evaluating the disclosure controls and procedures, management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives.

As required by Rule 13a-15(b) under the Exchange Act, our management conducted an evaluation, under the supervision and with the participation of our Principal Executive Officer and our Principal Financial Officer, of the effectiveness of the design and operation of our disclosure controls and procedures as of the end of the period covered by this Annual Report. Based on the foregoing evaluation, our principal executive officer and principal financial officer concluded that as of the end of the period covered by this report our disclosure controls and procedures were effective.

Changes in Our Controls

There were no changes in our internal controls over financial reporting during our most recent fiscal quarter that have materially affected, or are reasonably likely to materially affect our internal controls over financial reporting.

Management’s Report on Internal Control Over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Exchange Act Rules 13a-15(f) and 15d-15(f). With the participation of our Principal Executive Officer and Principal Financial Officer, management conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework in Internal Control - Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on its evaluation under this framework, our management concluded that our internal control over financial reporting was effective as of July 31, 2015.

Item 9B.  Other Information

None.

 

 

PART III

Item 10.  Directors, Executive Officers and Corporate Governance

Information Regarding Our Board of Directors

Pursuant to our bylaws, the number of directors is fixed and may be increased or decreased from time to time by resolution of our Board of Directors, or the Board. The Board has fixed the number of directors at six members.

Information with respect to our directors as of October 28, 2015 is shown below.

 

 

Dave J. Pfanzelter was appointed as our Chairman on August 13, 2013. He previously served as a director of the Company from February 2013 to July 2013. Mr. Pfanzelter served as senior vice president of Kellogg Company, president of Kellogg’s Specialty Channels and president of Kellogg Canada from May 2004 to May 2010, while also serving as part of the Kellogg Executive Committee and Global Leadership Team. Mr. Pfanzelter began his career in the food service industry in 1975 with Oscar Mayer Foods Corporation, serving in several key sales and marketing positions, including director of marketing and national sales manager. In 1995 he was appointed vice president of sales of Kraft Foodservice, representing the combined manufactured brands of Oscar Mayer, General Foods, and Kraft Foods. In 1998 Mr. Pfanzelter joined Keebler, serving as vice president and general manager of the food service division prior to Keebler’s acquisition by Kellogg in 2001. Since 1998, Mr. Pfanzelter has been on the board of directors of Doctor’s Associates, the parent company of Subway Restaurants, the nation’s largest restaurant chain. In February 2012, Mr. Pfanzelter joined the Advisory Board of Wrigley Foods. He also served on the Board of the International Food Service Manufacturer’s Association as chairman and member of its executive committee.

Henry R. Lambert was appointed to our Board and appointed as our Chief Executive Officer on September 10, 2013. Mr. Lambert is an accomplished food industry and consumer products executive with broad management skills, including strategic planning and business development, go-to-market execution, business integration and food safety. He has over 35 years of food industry experience, having worked at such notable companies as Heublein Inc., RJ Reynolds, Nabisco, Inc. and, Pinnacle Foods. He has held various business unit leadership positions servicing the foodservice and leading consumer food brands markets. Mr. Lambert has also served on boards and as a member of various food industry associations, including the International Foodservice Manufacturers Association (IFMA), Institute of Food Technologists and Safe Supply of Affordable Food Everywhere (SSAFE). From 2010 through June 2013, Mr. Lambert served as General Manager of the Global Food and Water Business of Underwriter Laboratories, where he was responsible for the start-up of the company’s food safety services business. From 2007 to 2010, Mr. Lambert served as Senior Vice President of Business Development, and then President, of Arrowstream Transportation, Inc., a provider of innovative supply chain management solutions to the foodservice industry whose key customers included Wendy’s, Applebee’s, Arby’s, TGIF, Sysco, and DMA. Prior to 2007, Mr. Lambert held executive positions with a number of high profile companies in the foodservice industry. Mr. Lambert earned his MBA in Finance from the University of Chicago, Booth School of Business, and his BA in Economics (with Honors) from Union College, Schenectady, N.Y.

Gary D. Cohee was appointed to our Board on August 13, 2013. He has over 40 years of experience as an investment banker, having started his career in 1973 with Blyth, Eastman Dillon & Co. Since 2004, Mr. Cohee has served as President and CEO of PMB Securities Corp. From 2011 until 2012, Mr. Cohee served on the Advisory Board of Force Fuels, Inc. During his career in the investment banking business, Mr. Cohee worked for a number of prestigious firms, including Bateman Eichler and Paulson Investment Company. Mr. Cohee graduated from California State University-

Long Beach in 1968 with a BS degree in Business Administration. He previously served as President of the Long Beach Bond Club, the Southern California Options Society and the Long Beach Century Club.

David Theno, Jr., PhD was appointed to our Board on October 1, 2013. Dr. Theno is a widely respected food safety expert, previously served on the Company’s Advisory Panel. Dr. Theno is currently the Chief Executive Officer of Gray Dog Partners, Inc., a technical consulting firm specializing in food safety and manufacturing, restaurant operations, supply chain management, strategic planning and facility design, where he served since October 2008. Gray Dog Partners also provides consulting services to federal, state and local regulatory bodies. From 1993 to 2008, Dr. Theno was employed by Jack in the Box, Inc. where he last served as the Senior Vice President and Chief Food Safety Officer and previously served as Corporate Vice President Technical Services. Dr. Theno has two Doctorate Degrees in Food Science and Animal Science and two Master’s Degrees in Animal Science and Veterinary Pharmacology from the University of Illinois.

William Otis was appointed to our Board on October 8, 2013. Mr. Otis is currently the Executive Vice President of U.S. packaged meat operations for Smithfield Foods. Prior to this role, he was the President and Chief Operating Officer of Patrick Cudahy, LLC and Saratoga Food Specialties. Both companies are food manufacturing companies of John Morrell Food Group and Smithfield Foods. Mr. Otis began his career in 1980 with Oscar Mayer Foods Corporation serving in several operations, finance and marketing positions. In 1995, Mr. Otis joined Patrick Cudahy, serving as Vice President of Sales and Marketing and in 2004 was promoted to President and COO. Mr. Otis also took over the President and COO role at Saratoga Food Specialties in 2012. Mr. Otis earned his Master’s Degree in Business Management from the University of Wisconsin-Madison.

Tom Y. Lee, CPA was appointed to our Board on October 24, 2014. Mr. Lee is currently the Chairman and CEO of Swabplus, Inc., a contract manufacturer of single-dose applicator and formulation OEM products, and has served as Chairman and CEO since 2008. Mr. Lee has experience in manufacturing and selling applicator and formulation OEM products, manufacturing and distributing products in Asia and is experienced in accounting matters. Mr. Lee was formerly audit committee chairman at First Continental Bank (which merged with United Commercial Bank in 2003). Mr. Lee has been an active CPA since 1983 and earned his Master of Science in accounting from California State University Long Beach and his Bachelors in Business Administration from TamKang University in Taipei, Taiwan.

Information Regarding Our Executive Officers

Information with respect to our executive officers as of October 28, 2015 is shown below. Since Henry R. Lambert and David J. Pfanzelter also serve on the Board, their respective biographies are set forth under “Information Regarding the Board of Directors” above.

 

 

Mark Elliott was appointed as our Vice President Finance and Principal Financial and Accounting Officer on July 31, 2015.  Mr. Elliott joined the Company in 2004 and has been responsible for managing all accounting and regulatory reporting activities since he was promoted to Controller in May 2006. He has also been responsible for establishing all current financial and reporting systems. Prior to joining the Company, Mr. Elliott worked in government accounting. He earned a Bachelor of Science, Business Administration-Accountancy at California State University-San Marcos.

Family Relationships

There is no family relationship between any current director or executive officer, or any director or executive officer during the fiscal year ended July 31, 2015.

Corporate Governance

Overview

We are committed to maintaining high standards of business conduct and corporate governance, which we believe are fundamental to the overall success of our business, serving our stockholders well and maintaining our integrity in the marketplace. Our Corporate Governance Guidelines and Code of Business Conduct and Ethics, together with our Certificate of Incorporation, Bylaws and the charters of our Board Committees, form the basis for our corporate governance framework. As discussed below, our Board of Directors has established two standing committees to assist it in fulfilling its responsibilities to the Company and its stockholders: the Audit Committee and the Compensation Committee. The Board of Directors performs the functions typically assigned to a Nominating and Corporate Governance Committee.

Corporate Governance Guidelines

Our Corporate Governance Guidelines are designed to ensure effective corporate governance of our Company. Our Corporate Governance Guidelines cover topics including, but not limited to, director qualification criteria, director responsibilities, director compensation, director orientation and continuing education, communications from stockholders to the Board, succession planning and the annual evaluations of the Board and its Committees. Our Corporate Governance Guidelines are reviewed regularly by the Board and revised when appropriate. The full text of our Corporate Governance Guidelines can be found in the “Corporate Governance” section of our website accessible at www.purebio.com. A printed copy may also be obtained by any stockholder upon request to our Corporate Secretary.

Code of Business Conduct and Ethics

We have adopted a Code of Business Conduct and Ethics that applies to all of our employees, officers and directors. This Code constitutes a “code of ethics” as defined by the rules of the SEC. This Code also contains “whistle blower” procedures adopted by our Audit Committee regarding the receipt, retention and treatment of complaints related to accounting, internal accounting controls or auditing matters and procedures for confidential anonymous employee complaints related to questionable accounting or auditing matters. Copies of the code may be obtained free of charge from our website, www.purebio.com. Any amendments to, or waivers from, a provision of our code of ethics that applies to any of our executive officers will be posted on our website in accordance with the rules of the SEC. Other than as specifically referenced herein, the information contained on, or that can be accessed through, our website is not a part of this Report.

 

Director Independence

We are not currently listed on any national securities exchange or in an inter-dealer quotation system that has established a standard for independence. However, in evaluating the independence of our members and the composition of the committees of our Board of Directors, our Board utilizes the definition of “independence” as that term is defined by applicable listing standards of the NYSE MKT. As of the date hereof, our Board consists of six members, three of whom are considered independent as that term is defined by applicable listing standards of the NYSE MKT. Our independent directors include: Messrs. Otis and Lee and Dr. Theno.

Board and Committee Attendance

During the fiscal year ended July 31, 2015, the Board of Directors met five times and it took action by unanimous written consent four times. During the fiscal year ended July 31, 2015 our Compensation Committee met one time and our Audit Committee met four times.  Each of the directors attended at least 75% of the meetings of the Board of Directors.    

Director Attendance at Annual Meeting

We believe the annual meeting of stockholders provides a good opportunity for our directors to hear any feedback the stockholders may share with the Company at the meeting. As a result, we encourage our directors to attend our annual meeting. We reimburse our directors for the reasonable expenses incurred by them in attending the annual meeting.

Executive Sessions

Executive sessions of our independent directors are held at each regularly scheduled meeting of our Board and at other times as necessary and are chaired by the Chairman of the Board. The Board’s policy is to hold executive sessions without the presence of management, including our President and Chief Executive Officer, who is the only non-independent director on the Board. Our Board Committees also generally meet in executive session at the end of each committee meeting.

Board Committees

Compensation Committee. The Compensation Committee of the Board of Directors currently consists of Dr. Theno (Chair). The functions of the Compensation Committee include the approval of the compensation offered to our executive officers and recommending to the full Board of Directors the compensation to be offered to our directors, including our Chairman. The Board has determined that Dr. Theno is an “independent director” under the listing standards of the NYSE MKT. In addition, Dr. Theno qualifies as a “non-employee director” for purposes of Rule 16b-3 under the Exchange Act and as an “outside director” for purposes of Section 162(m) of the Internal Revenue Code of 1986, as amended. The Compensation Committee is governed by a written charter approved by the Board of Directors, a copy of which is available on our website at www.purebio.com.

Audit Committee. The Audit Committee of the Board of Directors, currently consists of Messrs. Cohee (Chair), Lee and Otis. The functions of the Audit Committee include the retention of our independent registered public accounting firm, reviewing and approving the planned scope, proposed fee arrangements and results of the Company’s annual audit, reviewing the adequacy of the Company’s accounting and financial controls and reviewing the independence of the Company’s independent registered public accounting firm. The Board has determined that each of Messrs. Otis and Lee is an “independent director” under the listing standards of the NYSE MKT. Mr. Cohee is not independent because the Company has retained Mr. Cohee to provide financial advisory services to the Company. See “Certain Relationships and Related Transactions” for additional information regarding the Company’s retention of Mr. Cohee. The Board determined that it was in the Company’s and its stockholders best interests for Mr. Cohee to continue to serve on the audit committee, based on his accounting and financial expertise, until the Board adds additional independent directors. The Board of Directors has also determined that Messrs. Cohee, Lee and Otis are each an “audit committee financial expert” within the applicable definition of the SEC. The Audit Committee is governed by a written charter approved by the Board of Directors, a copy of which is available on our website at www.purebio.com. 

Nominating Committee. The Board has not established a Nominating Committee, and as a result performs the functions typically assigned to a Nominating Committee, including the identification, recruitment and nomination of candidates for the Board and its committees, determining the structure, composition and functioning of the Board and its committees including the reporting channels through which the Board receives information and the quality and timeliness of the information, developing and recommending to the Board corporate governance guidelines applicable to the Company and annually reviewing and recommending changes, as necessary or appropriate, overseeing the annual evaluation of the Board’s effectiveness and performance.

Board and Committee Effectiveness

The Board and each of its Committees performs an annual self-assessment to evaluate their effectiveness in fulfilling their obligations. The Board and Committee evaluations cover a wide range of topics, including, among others, the fulfillment of the Board and Committee responsibilities identified in the Corporate Governance Guidelines and charters for each Committee.

Board Leadership Structure

Our Bylaws provide our Board with flexibility to combine or separate the positions of Chairman of the Board and Chief Executive Officer in accordance with its determination that utilizing one or the other structure would be in the best interests of our company. At the current time, Mr. Pfanzelter serves as our Chairman of the Board, and Mr. Lambert serves as our Chief Executive Officer. Our Board believes our leadership structure enhances the accountability of our Chief Executive Officer to the Board and encourages balanced decision making. In addition, the Board believes that this structure provides an environment in which its independent directors are fully informed, have significant input into the content of Board meetings and are able to provide objective and thoughtful oversight of management. Our Board also separated the roles in recognition of the differences in responsibilities. While our Chief Executive Officer is responsible for the day-to-day leadership of the Company and its business operations, the Chairman of the Board provides guidance to the Board, sets the agenda for Board meetings and presides over the meetings of the full Board and the meetings of the Board’s non-management directors. The Board Chairman also provides performance feedback on behalf of the Board to our Chief Executive Officer. The Board intends to carefully evaluate from time to time whether our Chief Executive Officer and Chairman positions should remain separate based on what the Board believes is best for the Company and its stockholders.

Board Oversight of Risk

The Board is actively involved in the oversight of risks that could affect the Company. The Board as a whole has responsibility for risk oversight of the Company’s risk management policies and procedures, with reviews of certain areas being conducted by the relevant Board committee. The Board satisfies this responsibility through reports by each Committee Chair regarding the Committee’s considerations and actions, as well as through regular reports directly from management responsible for oversight of particular risks within the Company. Specifically, the Board committees address the following risk areas:

The Board as a whole considers risks related to regulatory and compliance matters as well as risks related to the Company’s sales and marketing and research and development initiatives.

The Board encourages management to promote a corporate culture that incorporates risk management into the Company’s day-to-day business operations.

Stockholder Recommendations for Director Nominees

In nominating candidates for election as a director, the Board will consider a reasonable number of candidates recommended by a single stockholder who has held over 20% of PURE Bioscience Common Stock for over one year and who satisfies the notice, information and consent provisions set forth in our Bylaws and Corporate Governance Guidelines. Stockholders who wish to recommend a candidate may do so by writing to the Board of Directors in care of the Corporate Secretary, PURE Bioscience, Inc., 1725 Gillespie Way, El Cajon, California 92020. The Board of Directors will use the same evaluation process for director nominees recommended by stockholders as it uses for other director nominees. A printed copy of our Bylaws may be obtained by any stockholder upon request to our Corporate Secretary.

Identification and Evaluation of Director Nominees

In evaluating nominees for membership on our Board, our Board applies the Board membership criteria set forth in our Corporate Governance Guidelines. Under these criteria, the Board takes into account many factors, including an individual’s business experience and skills (including skills in core areas such as operations, management, technology, accounting and finance, strategic planning and international markets), as well as independence, judgment, knowledge of our business and industry, professional reputation, leadership, integrity and ability to represent the best interests of the

Company’s stockholders. In addition, the Board also considers the ability to commit sufficient time and attention to the activities of the Board, as well as the absence of any potential conflicts with the Company’s interests. The Board does not assign specific weights to particular criteria and no particular criterion is necessarily applicable to all prospective nominees. The Board does not have a formal policy with respect to diversity of nominees. Rather, our Board considers Board membership criteria as a whole and seeks to achieve diversity of occupational and personal backgrounds on the Board.

Our Board regularly assesses the appropriate size of our Board, and whether any vacancies on our Board are expected due to retirement or otherwise. In the event that vacancies are anticipated, or otherwise arise, the Board will consider various potential candidates who may come to the attention of the Board through current Board members, professional search firms, stockholders or other persons. Each candidate brought to the attention of the Board, regardless of who recommended such candidate, is considered on the basis of the criteria set forth in our corporate governance guidelines. As stated above, our Board will consider candidates proposed for nomination by our significant stockholders. Stockholders may propose candidates by submitting the names and supporting information to: Corporate Secretary, PURE Bioscience, Inc., 1725 Gillespie Way, El Cajon, California 92020. Supporting information should include (a) the name and address of the candidate and the proposing stockholder, (b) a comprehensive biography of the candidate and an explanation of why the candidate is qualified to serve as a director taking into account the criteria identified in our corporate governance guidelines, (c) proof of ownership, the class and number of shares, and the length of time that the shares of our voting securities have been beneficially owned by each of the candidate and the proposing stockholder, and (d) a letter signed by the candidate stating his or her willingness to serve, if elected.

Item 11.  Executive Compensation

Summary Compensation Table

The following table sets forth a summary of cash and non-cash compensation awarded, earned or paid for services rendered to us during the fiscal years ended July 31, 2015 and July 31, 2014 by our named executive officers, consisting of (i) each individual serving as principal executive officer during the fiscal year ended July 31, 2015 and (ii) our other two most highly compensated officers serving during the fiscal year ended July 31, 2015.

 

 

 

---

Narrative to Summary Compensation Table

 

The compensation program established for the Company’s executive officers consisted of the following elements:

 

Base Salary: The base salaries of our named executive officers depend on their job responsibilities, the market rate of compensation paid by companies in our industry for similar positions, our financial position, and the strength of our business. Base salaries provide a fixed means of compensation in order to attract and retain talent.   The base salary of Mr. Lambert is $350,000 per year.  The base salary for Mr. Wulff was $325,000 per year.  Additionally, Mr. Pfanzelter receives $150,000 per year for his service as Chairman of the Board.

 

Performance-Based Cash Awards: As part of the Company’s executive compensation program, our executive officers are eligible to receive performance-based cash awards. The annual performance-based cash awards are based on the executive officer’s individual performance and the Company’s actual performance compared to the corporate goals approved by the Board and the Compensation Committee. Following the end of each fiscal year, the Board and the Compensation Committee is responsible for determining the bonus amount payable to an executive officer based on that executive officer’s individual performance during the fiscal year and its determination of the Company’s actual performance compared to the corporate goals established for that fiscal year. Pursuant to the terms of Messrs. Lambert’s and Wulff’s respective employment agreements, the bonus potential was equal to 50% of their respective base salaries.  Due to the Company’s limited financial resources and performance, our named executive officers did not receive any bonuses for the year ended July 31, 2015.

 

Long-Term Equity Awards:  Equity ownership by our executive officers and key employees encourages them to create long-term value and aligns their interests with those of our stockholders. As a result, our executive compensation program provides for the issuance of stock options and RSUs.

Outstanding Equity Awards at Year-End

The following table provides a summary of all equity awards held by our named executive officers that were outstanding as of July 31, 2015.

 

 

 

During the year ended July 31, 2015, 250,000 of Mr. Wulff’s and 300,000 of Mr. Lambert’s RSUs vested. The value realized on vesting was $158,000 and $294,000, respectively. In addition, during the year ended July 31, 2015, 700,000 of Mr. Pfanzelter’s restricted stock units vested. The value realized on vesting was $448,000. No other option or stock awards vested for our named executive officers.

 

Employment Agreements; Potential Payments Upon Termination or a Change in Control for Current Executive Officers

Agreements with our Chief Executive Officer and our former Chief Financial Officer and Chief Operating Officer

On (i) August 13, 2013, we appointed Peter C. Wulff as our Chief Financial Officer, Chief Operating Officer, and Corporate Secretary and (ii) September 10, 2013, we appointed Henry R. Lambert to serve as Chief Executive Officer and a member of the Board.

As described elsewhere in this report, on July 31, 2015, Mr. Wulff resigned from his positions as the Company’s Chief Financial Officer, Chief Operating Officer and Corporate Secretary and his employment agreement terminated by its terms.  Mr. Wulff also resigned as the Company’s Principal Financial Officer and Principal Accounting Officer.  Mr.

Wulff did not resign for “good reason” and his resignation did not result from any disagreement with the Company on any matter relating to the Company’s operations, policies or practices. 

The following describes Mr. Lambert’s employment agreement.  Mr. Wulff’s employment agreement was substantially similar to Mr. Lambert’s prior to his termination of employment.

The terms of Mr. Lambert’s employment agreement provides that such agreement continues until termination by either the Company or Mr. Lambert. During the term of Mr. Lambert’s employment agreement, he is entitled to an annual base salary, which may be increased, but not decreased, by the Board or the Compensation Committee in their discretion. The annual base salary of Mr. Lambert is $350,000.

The employment agreement provides that, during the term of the agreement, Mr. Lambert is eligible for equity compensation grants to be awarded at the discretion of the Compensation Committee and the Board, and also provided for annual bonus targets equal to, as applicable, 50% of Mr. Lambert’s current annual base salary, to be awarded at the sole discretion of the Compensation Committee and the Board. Additionally, pursuant to the terms of Mr. Lambert’s employment agreement, we granted Mr. Lambert 500,000 RSUs.

The employment agreement provides for certain compensation to be paid to Mr. Lambert if his employment is terminated by the Company without Cause or terminated by the executive for Good Reason. In summary, “Cause” is the commission by the executive of an act of fraud or another felony, or gross misconduct resulting in a material adverse effect on the Company; refusal by the executive to perform his or her duties under the agreement or to otherwise breach the agreement, or a violation of confidentiality, non-competition and/or non-solicitation provisions to which the Company is bound. “Good Reason” is a material reduction of the executive’s base salary or target bonus percentage; a material reduction by the Company of the executive’s authority, duties or responsibilities; a relocation of the Company’s offices that requires an increase in the executive’s one-way driving distance of more than fifty miles; or a material breach of the agreement by the Company.

Upon such event and subject to Mr. Lambert’s execution of a release of claims in favor of the Company, Mr. Lambert would be entitled to receive his base salary then in effect and group health and dental benefits in accordance with COBRA for a period of 6 months from the date of his termination. Additionally, Mr. Lambert’s agreement provides that all outstanding vested stock options held by him at the date of such termination would continue to be exercisable for a period of up to 90 days following such termination, but in no event beyond the maximum permitted expiration date.

The employment agreement with Mr. Lambert also provides for additional compensation if the termination of his employment is without Cause or his resignation is for Good Reason within twelve months following a Change in Control. A “Change in Control” is the closing of the sale, transfer or other disposition of all or substantially all of the Company’s assets or the exclusive license of substantially all of the intellectual property of the Company; the consummation of a merger or consolidation of the Company with or into another entity; any person (subject to certain exemptions) becomes the beneficial owner of securities of the Company representing 35% or more of the total combined voting power of the Company; or if individuals who, as of 60 days after the effective date of the agreement are members of the Board, or are nominees of such Board members, cease to constitute at least a majority of the members of the Board.

Upon such event, Mr. Lambert would be entitled to additional severance pay in excess of the amounts described above, in a single lump sum payment equal to 100% of his then current annual base salary. In addition, in such event, the vesting of all outstanding equity based awards then held by Mr. Lambert would automatically accelerate and all equity based awards would continue to be exercisable for 12 months, but in no event beyond the maximum permitted expiration date.

The employment agreements with Mr. Lambert also provides that the Company could, in certain circumstances and in order to avoid incurring fines or penalties under applicable law (including recently enacted federal healthcare legislation), elect to pay cash payments equivalent to the value of the monthly premiums the Company would otherwise pay to provide for the continuation of health and dental insurance for such executives and their eligible dependents following each such executive’s termination without Cause or resignation for Good Reason.

The foregoing descriptions of the employment agreements do not purport to be complete and are qualified in their entirety by the terms and conditions of such employment agreements filed as Exhibits 10.33 and 10.34 to the Annual Report on Form 10-K for the year ended July 31, 2013 filed with the SEC on October 24, 2013.

The RSUs granted to Messrs. Lambert and Wulff on October 23, 2013 are also eligible (or in the case of Mr. Wulff, were eligible, prior to his termination of employment with us) for vesting acceleration upon the occurrence of any of the following: (i) a Change in Control; (ii) the executive’s termination without Cause or resignation for Good Reason; or (iii) the executive’s death or complete disability.  For Mr. Lambert, 200,000 RSUs that are subject to performance-based vesting, as further described above in the Outstanding Equity Awards at Year-End table, would fully accelerate upon the occurrence of such an event prior to October 31, 2015.  Prior to his termination of employment, 100% of the unvested RSUs granted to Mr. Wulff on October 23, 2013 would have vested upon the occurrence of any one of those events.

Agreements with our Chairman

On August 13, 2013, we appointed Dave J. Pfanzelter to serve as Chairman of the Board. On October 23, 2013, we entered into a Chairman Agreement with Mr. Pfanzelter (the “Chairman Agreement”). The Chairman Agreement provides that Mr. Pfanzelter is to serve as Chairman of the Board, effective as of August 13, 2013, until his earlier resignation or removal.  Pursuant to the Chairman Agreement, Mr. Pfanzelter is entitled to receive $12,500 per month for his services as Chairman of the Board, payable on a quarterly basis (collectively “Chairman Compensation”). Mr. Pfanzelter is also eligible to receive annual and periodic bonuses in the discretion of the Board. Additionally, pursuant to the terms of the Chairman Agreement, we granted Mr. Pfanzelter 2,800,000 RSUs. Due to his service as Chairman, we consider Mr. Pfanzelter an executive officer of the Company.

The Chairman Agreement provides for certain compensation to be paid to Mr. Pfanzelter if he is removed by the Board without Cause or Mr. Pfanzelter resigns for Good Reason. In summary, “Cause” is the commission by Mr. Pfanzelter of an act of fraud or another felony, or gross misconduct resulting in a material adverse effect on the Company; refusal by Mr. Pfanzelter to perform his duties under the Chairman Agreement or to otherwise breach the Chairman Agreement, or a material breach by Mr. Pfanzelter of Company policy or the Chairman Agreement or other agreements between the Company and Mr. Pfanzelter. “Good Reason” is a material reduction of Mr. Pfanzelter’s compensation; a material reduction by the Board of Mr. Pfanzelter’s authority, duties or responsibilities; or a material breach of the Chairman Agreement by the Company.

 

Upon such event and subject to Mr. Pfanzelter’s execution of a release of claims in favor of the Company, Mr. Pfanzelter would be entitled to receive his Chairman Compensation (as then in effect) for a period of 12 months following such date of removal or resignation. The Chairman Agreement additionally provides that all outstanding vested stock options held by Mr. Pfanzelter at the date of such termination would continue to be exercisable for a period of up to 90 days following such termination, but in no event beyond the maximum permitted expiration date.

The Chairman Agreement with Mr. Pfanzelter also provides for additional compensation if Mr. Pfanzelter’s termination as our Chairman is without Cause or his resignation with Good Reasons is within twelve months following a Change in Control. A “Change in Control” is the closing of the sale, transfer or other disposition of all or substantially all of the Company’s assets or the exclusive license of substantially all of the intellectual property of the Company; the consummation of a merger or consolidation of the Company with or into another entity; any person (subject to certain exemptions) becomes the beneficial owner of securities of the Company representing 35% or more of the total combined voting power of the Company; or if individuals who, as of 60 days after the effective date of the agreement are members of the Board, or are nominees of such Board members, cease to constitute at least a majority of the members of the Board. Upon such event, Mr. Pfanzelter would be entitled to additional separation pay in excess of the amount described above in a single lump sum payment equal to 200% of Mr. Pfanzelter’s then current Chairman Compensation. Additionally, 100% of Mr. Pfanzelter’s restricted stock units described above would vest.

The foregoing description of the Chairman Agreement does not purport to be complete and is qualified in its entirety by the terms and conditions of such Chairman Agreement filed as Exhibit 10.35 to the Annual Report on Form 10-K for the year ended July 31, 2013 filed with the SEC on October 24, 2013.

The RSUs granted to Mr. Pfanzelter on October 23, 2013 are also eligible for 100% vesting acceleration upon the occurrence of any of the following: (i) a Change in Control; (ii) Mr. Pfanzelter’s termination without Cause or resignation for Good Reason; or (iii) Mr. Pfanzelter’s death or complete disability.

Code Section 162(m) Provisions

Section 162(m) of the U.S. Internal Revenue Code, or the Code, generally disallows a tax deduction to public companies for compensation in excess of $1 million paid to the Chief Executive Officer or any of the four most highly compensated officers. Performance-based compensation arrangements may qualify for an exemption from the deduction limit if they satisfy various requirements under Section 162(m). Although we consider the impact of this rule when developing and implementing our executive compensation programs, we believe it is important to preserve flexibility in designing compensation programs. Accordingly, we have not adopted a policy that all compensation must qualify as deductible under Section 162(m) of the Code. While our stock options are intended to qualify as “performance-based compensation” (as defined by the Code), amounts paid under our other compensation programs may not qualify as such.

Compensation of Directors

Each non-employee director of the Company will receive cash fees from the Company for their services as members of the Board and any committee of the Board as follows:  

Annual fees will be paid to each non-employee director in four equal installments on a quarterly basis. Any non-employee directors serving a portion of the year will be entitled to receive such fees on a pro rata basis based on their length of service during the year.

New non-employee directors will receive an initial grant of 200,000 restricted stock units. Currently, all non-employee director grants of restricted stock units generally vest fifty percent (50%) on the date of the next annual meeting and fifty percent (50%) on the date of the following year’s annual meeting.

In the past, our Board has approved each year, generally in the second calendar quarter of the year, an annual option or stock grant for our non-employee directors. Any such grant is at the discretion of the Board, which considers the recommendation of our Compensation Committee. Upon the Board’s approval of any such grant, each non-employee director generally may elect whether to receive the grant as an option or stock award.

The following table sets forth compensation earned in the fiscal year ended July 31, 2015 by each of our directors who are not named executive officers.

 

 

---

 

Item 12.  Security Ownership of Certain Beneficial Owners and Management

The following table provides information regarding the beneficial ownership of our common stock as of October 28, 2015, or the Evaluation Date, by: (i) each of our current directors, (ii) each of our named executive officers as set forth in Item 11 of this Annual Report, (iii) all such directors and executive officers as a group and (iv) our five percent or greater stockholders. The table is based upon information supplied by our officers, directors and principal stockholders and a review of Schedules 13D and 13G, if any, filed with the SEC. Unless otherwise indicated in the footnotes to the table and subject to community property laws where applicable, we believe that each of the stockholders named in the table has sole voting and investment power with respect to the shares indicated as beneficially owned.

Applicable percentages are based on 55,192,630 shares outstanding as of the Evaluation Date, adjusted as required by rules promulgated by the SEC. These rules generally attribute beneficial ownership of securities to persons who possess sole or shared voting power or investment power with respect to those securities. In addition, the rules include shares of our common stock issuable pursuant to the exercise of stock options or warrants or settlement of restricted stock units that are either immediately exercisable or exercisable within 60 days of the Evaluation Date. These shares are deemed to be outstanding and beneficially owned by the person holding those securities for the purpose of computing the percentage ownership of that person, but they are not treated as outstanding for the purpose of computing the percentage ownership of any other person.

 

 

 

---

*Indicates less than one percent of the outstanding shares of the Company’s common stock.