Document
Table of Contents

UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, DC 20549
Form 10-K
(MARK ONE)
 
 
 
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934
 
 
For the fiscal year ended October 29, 2017
OR
 
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934
 
 
For the transition period from          to          
State or Other Jurisdiction of Incorporation or Organization
 
Exact Name of Registrant as Specified in Its Charter Address of Principal Executive Offices
Registrant’s telephone number, including area code
 
Commission File Number
 
IRS Employer Identification No.
Singapore
 
Broadcom Limited
 
001-37690
 
98-1254807
 
 
1 Yishun Avenue 7
Singapore 768923
 
 
 
 
 
 
(65) 6755-7888
 
 
 
 
Cayman Islands
 
Broadcom Cayman L.P.
 
333-2025938
 
98-1254815
 
 
c/o/ Broadcom Limited
1 Yishun Avenue 7
Singapore 768923
 
 
 
 
 
 
(65) 6755-7888
 
 
 
 
 
 
Securities registered pursuant to Section 12(b) of the Act:
 
 
 
 


Title of Class
 
Name of Each Exchange on Which Registered
 
 
 
Ordinary Shares, no par value
 
The NASDAQ Global Select Market

 
 
Securities registered pursuant to Section 12(g) of the Act:
None
(Title of class)

 
 
 
 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
Broadcom Limited:        Yes      No         Broadcom Cayman L.P.:    Yes      No 
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.
Broadcom Limited:        Yes      No         Broadcom Cayman L.P.:    Yes      No 
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
Broadcom Limited:        Yes      No         Broadcom Cayman L.P.:    Yes      No 
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).
Broadcom Limited:        Yes      No         Broadcom Cayman L.P.:    Yes      No 
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.
Broadcom Limited                    Broadcom Cayman L.P.:     
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act. (Check one):
Broadcom Limited:
Large accelerated filer 
     Accelerated filer 
Non-accelerated filer 
Smaller reporting company 
Emerging growth company 
Broadcom Cayman L.P.:
Large accelerated filer 
     Accelerated filer 
Non-accelerated filer 
Smaller reporting company 
Emerging growth company 
 
 
(Do not check if a smaller reporting company)     
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). 
Broadcom Limited:        Yes      No          Broadcom Cayman L.P.:    Yes      No 
State the aggregate market value of Broadcom Limited’s voting and non-voting ordinary shares held by non-affiliates as of the last business day of the Registrant’s most recently completed second fiscal quarter: As of April 30, 2017, the last business day of our most recently completed second fiscal quarter, the aggregate market value of Broadcom Limited’s ordinary shares held by non-affiliates of Broadcom Limited (based upon the closing sale price of such shares on the Nasdaq Global Select Market on April 28, 2017, the last trading day prior to our fiscal quarter end) was approximately $89.2 billion.
As of November 24, 2017, Broadcom Limited had 409,362,475 of its ordinary shares, no par value per share, outstanding. As of November 24, 2017, Broadcom Cayman L.P. had 390,900,560 common partnership units outstanding (all of which are owned by Broadcom Limited) and 22,141,886 restricted exchangeable partnership units outstanding.
Documents Incorporated by Reference
Information required in response to Part III of this Annual Report on Form 10-K is hereby incorporated by reference from Broadcom Limited’s definitive Proxy Statement for its 2018 Annual General Meeting of Shareholders. Except as expressly incorporated by reference, Broadcom Limited’s Proxy Statement shall not be deemed to be a part of this Annual Report on Form 10-K. Broadcom Limited intends to file its definitive Proxy Statement within 120 days after its fiscal year ended October 29, 2017.



Table of Contents

EXPLANATORY NOTE
This report combines the annual reports on Form 10-K for the fiscal year ended October 29, 2017 of Broadcom Limited and Broadcom Cayman L.P. Unless stated otherwise or the context otherwise requires, references to “Broadcom,” “we,” “our” and “us” mean Broadcom Limited and its consolidated subsidiaries, including Broadcom Cayman L.P. References to the “Partnership” mean Broadcom Cayman L.P. and its consolidated subsidiaries. Financial information and results of operations presented in the Form 10-K for the periods prior to February 1, 2016 relate to Avago Technologies Limited, our predecessor, and relate to Broadcom and the Partnership for the periods after February 1, 2016. Broadcom Corporation was indirectly acquired by Broadcom on February 1, 2016 (refer to Note 1. “Overview and Basis of Presentation” included in Part II, Item 8 of this Form 10-K for additional information).
As of October 29, 2017, Broadcom Limited owned approximately 95% of the Partnership (represented by common partnership units, or Common Units) and is the sole general partner of the Partnership, or the General Partner. The balance of the interest in the Partnership is held by the limited partners, or the Limited Partners, in the form of restricted exchangeable limited partnership units, or Partnership REUs. As the General Partner, Broadcom has the exclusive right, power and authority to manage, control, administer and operate the business and affairs and to make decisions regarding the undertaking and business of the Partnership in accordance with the amended and restated exempted limited partnership agreement, as amended from time to time, and applicable laws. There is no board of directors of the Partnership.
Shareholders’ equity, partners’ capital and the Limited Partners’ noncontrolling interest in Broadcom are the primary areas of difference between the consolidated financial statements of Broadcom and those of the Partnership. The Partnership’s capital consists of Common Units owned by Broadcom and Partnership REUs owned by the Limited Partners. The Partnership REUs are accounted for in partners’ capital in the Partnership’s financial statements and as noncontrolling interest in shareholders’ equity in Broadcom’s financial statements.
The material differences between Broadcom and the Partnership are discussed in various sections in this report, including separate financial statements (but combined footnotes), separate disclosure controls and procedures sections, separate certifications of periodic report under Section 302 of the Sarbanes-Oxley Act of 2002 and separate certifications pursuant to 18 U.S.C Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002. In the sections that combine disclosure for Broadcom and the Partnership, this report refers to actions or holdings as being actions or holdings of Broadcom.
Broadcom consolidates the Partnership for financial reporting purposes, and neither Broadcom nor the Partnership has material assets other than its interests in their subsidiaries. Therefore, while shareholders’ equity and partners’ capital differ as discussed above, the assets of Broadcom and the Partnership are materially the same on their respective financial statements.


Table of Contents

BROADCOM LIMITED AND BROADCOM CAYMAN L.P.
2017 ANNUAL REPORT ON FORM 10-K

TABLE OF CONTENTS
 
 
Page
 
 
 



Table of Contents

PART I
The following discussion should be read in conjunction with the consolidated financial statements and notes thereto included elsewhere in this Annual Report on Form 10-K. This Annual Report on Form 10-K contains forward-looking statements within the meaning of the federal securities laws and particularly in Item 1: “Business,” Item 1A: “Risk Factors,” Item 3: “Legal Proceedings” and Item 7: “Management’s Discussion and Analysis of Financial Condition and Results of Operations” of this Annual Report on Form 10-K. These statements are indicated by words or phrases such as “anticipate,” “expect,” “estimate,” “seek,” “plan,” “believe,” “could,” “intend,” “will,” and similar words or phrases. These forward-looking statements may include the proposed transaction involving Broadcom and Qualcomm Incorporated, or Qualcomm, and the expected benefits of the proposed transaction; projections of financial information; statements about historical results that may suggest trends for our business; statements of the plans, strategies, and objectives of management for future operations; statements of expectation or belief regarding future events (including any acquisitions we may make), technology developments, our products, product sales, expenses, liquidity, cash flow and growth rates, or enforceability of our intellectual property rights; and the effects of seasonality on our business. Such statements are based on current expectations, estimates, forecasts and projections of our or industry performance and macroeconomic conditions, based on management’s judgment, beliefs, current trends and market conditions, and involve risks and uncertainties that may cause actual results to differ materially from those contained in the forward-looking statements. We derive most of our forward-looking statements from our operating budgets and forecasts, which are based upon many detailed assumptions. While we believe that our assumptions are reasonable, we caution that it is very difficult to predict the impact of known factors, and it is impossible for us to anticipate all factors that could affect our actual results. Accordingly, we caution you not to place undue reliance on these statements. Important factors that could cause actual results to differ materially from our expectations are disclosed under “Risk Factors” in Part I, Item 1A of this Annual Report on Form 10-K. These factors include risks associated with our proposal to acquire Qualcomm, including: (i) the ultimate outcome of any possible transaction between Broadcom and Qualcomm; (ii) uncertainties as to whether Qualcomm will cooperate with us regarding the proposed transaction; (iii) the effects of the announcement of the proposed transaction on the ability of Broadcom and Qualcomm to retain customers, to retain and hire key personnel and to maintain favorable relationships with suppliers or customers; (iv) the timing of the proposed transaction; (v) the ability to obtain regulatory approvals and satisfy other closing conditions to the completion of the proposed transaction (including shareholder approval); and (vi) other risks related to the completion of the proposed transaction and actions related thereto; any loss of our significant customers and fluctuations in the timing and volume of significant customer demand; our dependence on contract manufacturing and outsourced supply chain; our dependency on a limited number of suppliers; any acquisitions we may make, such as delays, challenges and expenses associated with receiving governmental and regulatory approvals and satisfying other closing conditions, and with integrating acquired companies with our existing businesses and our ability to achieve the growth prospects and synergies expected by such acquisitions; our ability to accurately estimate customers’ demand and adjust our manufacturing and supply chain accordingly; our significant indebtedness, including the need to generate sufficient cash flows to service and repay such debt; dependence on a small number of markets and the rate of growth in these markets; dependence on and risks associated with distributors of our products; dependence on senior management; quarterly and annual fluctuations in our operating results; global economic conditions and concerns; our proposed redomiciliation of our ultimate parent company to the United States; our competitive performance and ability to continue achieving design wins with our customers, as well as the timing of any design wins; prolonged disruptions of our or our contract manufacturers' manufacturing facilities or other significant operations; our ability to improve our manufacturing efficiency and quality; our dependence on outsourced service providers for certain key business services and their ability to execute to our requirements; our ability to maintain or improve gross margin; our overall cash tax costs, legislation that may impact our overall cash tax costs and our ability to maintain tax concessions in certain jurisdictions; our ability to protect our intellectual property and the unpredictability of any associated litigation expense; any expense or reputational damage associated with resolving customer product warranty and indemnification claims;  cyclicality in the semiconductor industry or in our target markets; our ability to sell to new types of customers and to keep pace with technological advances; market acceptance of the end products into which our products are designed; and other events and trends on a national, regional and global scale, including those of a political, economic, business, competitive and regulatory nature. All of the forward-looking statements in this Annual Report on Form 10-K are qualified in their entirety by reference to the factors listed above and those discussed under the heading “Risk Factors” in Part I, Item 1A of this Annual Report on Form 10-K. We caution you that the foregoing list of important factors may not contain all of the material factors that are important to you. In addition, in light of these risks and uncertainties, the matters referred to in the forward-looking statements contained in this Annual Report on Form 10-K may not in fact occur. We undertake no intent or obligation to publicly update or revise any forward-looking statement, whether as a result of new information, future events or otherwise, except as otherwise required by law.
Unless stated otherwise or the context otherwise requires, references to “Broadcom,” “we,” “our” and “us” mean Broadcom Limited and its consolidated subsidiaries, including Broadcom Cayman L.P. References to the “Partnership” mean Broadcom Cayman L.P. and its consolidated subsidiaries. Financial information and results of operations presented for the

1

Table of Contents

periods prior to February 1, 2016 relate to Avago Technologies Limited, our predecessor, and relate to Broadcom and the Partnership for the periods after February 1, 2016. Our fiscal year ends on the Sunday closest to October 31 in a 52-week year and the first Sunday in November in a 53-week year. We refer to our fiscal years by the calendar year in which they end. For example, the fiscal year ended October 29, 2017 is referred to as “fiscal year 2017.”

2

Table of Contents

ITEM 1.
BUSINESS
Overview
Broadcom Limited, or Broadcom, is the successor to Avago Technologies Limited, or Avago, as a result of the business combination between Avago and Broadcom Corporation, or BRCM, completed on February 1, 2016, or the Broadcom Transaction. We are a leading designer, developer and global supplier of a broad range of semiconductor devices with a focus on complex digital and mixed signal complementary metal oxide semiconductor, or CMOS, based devices and analog III-V based products. We have a history of innovation and offer thousands of products that are used in end products such as enterprise and data center networking, home connectivity, set-top boxes, broadband access, telecommunication equipment, mobile handsets and base stations, data center servers and storage systems, factory automation, power generation and alternative energy systems, and electronic displays. We differentiate ourselves through our high performance design and integration capabilities and focus on developing products for target markets where we believe we can earn attractive margins. We have four reportable segments: wired infrastructure, wireless communications, enterprise storage, and industrial & other, which align with our principal target markets.
The Partnership is an exempted limited partnership formed under the laws of the Cayman Islands. Broadcom is the sole General Partner and owns a majority interest (by vote and value) in the Partnership. As General Partner, Broadcom has the exclusive right, power and authority to manage, control, administer and operate the business and affairs and to make decisions regarding the undertaking and business of the Partnership in accordance with the Partnership’s amended and restated exempted partnership agreement, or the Partnership Agreement, and applicable laws. There is no board of directors of the Partnership.
Semiconductors are made by imprinting a network of electronic components onto a semiconductor wafer. These devices are designed to perform various functions such as processing, amplifying and selectively filtering electronic signals, controlling electronic system functions and processing, and transmitting and storing data. Our digital and mixed signal products are based on silicon wafers with CMOS transistors offering fast switching speeds and low power consumption, which are both critical design factors for the markets we serve. We also offer analog products, which are based on III-V semiconductor materials that have higher electrical conductivity than silicon, and thus tend to have better performance characteristics in radio frequency, or RF, and optoelectronic applications. III-V refers to elements from the 3rd and 5th groups in the periodic table of chemical elements. Examples of these materials used in our products are gallium arsenide, or GaAs, gallium nitride, and indium phosphide, or InP. Following the acquisition of Brocade Communications Systems, Inc., or Brocade, we also offer mission critical fibre channel storage area networking, or FC SAN, products in the form of modules, switches and subsystems incorporating multiple semiconductor products.
Our over 50-year history of innovation dates back to our diverse origins from Hewlett-Packard Company, AT&T, LSI Corporation, or LSI, and BRCM. Over the years, we have assembled a large team of digital, mixed signal and analog design engineers around the world. We maintain design and product development engineering resources at locations in the United States, Asia, Europe and Israel, providing us with engineering expertise worldwide. We strategically focus our research and development resources to address niche opportunities in our target markets and leverage our extensive portfolio of U.S. and other patents and other intellectual property, or IP, to integrate multiple technologies and create system-on-chip, or SoC, and component solutions that target growth opportunities. We design products that deliver high-performance and provide mission-critical functionality.
Original equipment manufacturers, or OEMs, or their contract manufacturers, and distributors typically account for the substantial majority of our sales. We have established strong relationships with leading OEM customers across multiple target markets. Many of our major customer relationships have been in place for many years and have often been built as a result of years of collaborative product development. This has enabled us to build our IP portfolio and develop critical expertise regarding our customers’ requirements, including substantial system level knowledge. This collaboration has provided us with key insights into our customers' businesses and has enabled us to be more efficient and productive and to better serve our target markets and customers. We have a direct sales force focused on supporting large OEMs. We also distribute a substantial portion of our products through our broad distribution network, and a significant amount of these sales are to large global electronic components distributors, including Avnet, Inc.
We focus on maintaining an efficient global supply chain and a variable, low-cost operating model. Accordingly, we outsource a majority of our manufacturing operations, utilizing third-party foundry and assembly and test capabilities, as well as some of our corporate infrastructure functions. We focus our internal fabrication capacity and capital expenditures on products utilizing our innovative and proprietary processes, to protect our IP and to accelerate time to market of our products, while outsourcing commodity processes such as standard CMOS. We also have a long history of operating in Asia, where approximately 38% of our employees are located and where we manufacture and source the majority of our products and materials. Our presence in Asia places us in close proximity to many of our customers’ manufacturing facilities and at the center of worldwide electronics manufacturing.

3

Table of Contents

Recent Developments
U.S. 2017 Tax Reform Act
On December 20, 2017, the Tax Cuts and Jobs Act, or the 2017 Tax Reform Act, was approved by Congress and is pending presidential approval. In general, the 2017 Tax Reform Act reduces the U.S. corporate income tax rate from 35% to 21%, effective in 2018. The 2017 Tax Reform Act moves from worldwide business taxation to a participation exemption regime. The 2017 Tax Reform Act also imposes base-erosion prevention measures on non-U.S. earnings of U.S. entities, as well as a one-time mandatory deemed repatriation tax on accumulated non-U.S. earnings of U.S. entities. The base-erosion prevention measures will have the effect of subjecting non-U.S. earnings of U.S. entities to taxation in the United States at an effective rate that is expected to be substantially lower than 21%. The 2017 Tax Reform Act will affect the tax position and cash taxes of our U.S. entities and will have a corresponding impact on our consolidated financial results starting in the first quarter of our fiscal year 2018.
Acquisition of Brocade
On November 17, 2017, we acquired Brocade for approximately $6.1 billion. Brocade’s networking solutions help the world’s leading organizations turn their networks into platforms for business innovation. With solutions spanning public and private data centers to the network edge, Brocade is a leader in FC SAN switching. We are in the process of integrating Brocade into our enterprise storage segment. In connection with the acquisition of Brocade, or the Brocade Merger, we incurred $4.0 billion of indebtedness.
Proposed Acquisition of Qualcomm
On November 6, 2017, we announced a proposal to acquire Qualcomm Incorporated, or Qualcomm, for $70 per share, consisting of $60 in cash and $10 in Broadcom ordinary shares. We stated that the proposal stands whether Qualcomm’s pending acquisition of NXP Semiconductors N.V., or NXP, is consummated on the then-disclosed terms of $110 per NXP share or is terminated. Including the assumption of net debt and giving effect to the pending NXP acquisition, the enterprise value of the proposed transaction is approximately $130 billion.
On November 13, 2017, Qualcomm’s board of directors rejected our proposal. In response, we announced that we remained fully committed to pursuing the acquisition of Qualcomm and reiterated our proposal.
On December 4, 2017, we announced that we had provided notice to Qualcomm of our intent to nominate 11 candidates for election to the Qualcomm board of directors at Qualcomm’s 2018 annual meeting of stockholders.
On December 11, 2017, we filed preliminary proxy materials with the U.S. Securities and Exchange Commission, or the SEC, in connection with our planned solicitation of proxies to elect 11 independent, highly qualified nominees to the Qualcomm board of directors at Qualcomm’s 2018 annual meeting of stockholders, which Qualcomm has announced will be held on March 6, 2018.
We also filed a premerger notification under the Hart-Scott-Rodino Antitrust Improvements Act of 1976 with the U.S. Department of Justice and the Federal Trade Commission regarding our proposed acquisition of Qualcomm.
No agreement has been reached with Qualcomm and there can be no assurance that any transaction will result from our proposal.
Redomiciliation to the United States from Singapore
On November 2, 2017, we announced our intention to initiate a process to change the ultimate parent company of the Broadcom group from a Singapore company to a U.S. corporation. The final form and timing of the redomiciliation has not yet been finalized and may be affected by the implementation of the 2017 Tax Reform Act. In addition, the redomiciliation is subject to the approval of our shareholders. We presently expect that our overall cash tax costs will approximately double, as compared to our fiscal year 2017 results, due to the redomiciliation and taking in account our initial estimates of the expected effects of the 2017 Tax Reform Act.
Products and Markets
Our product portfolio ranges from discrete devices to complex sub-systems that include multiple device types and may also incorporate firmware for interfacing between analog and digital systems. In some cases, our products include mechanical hardware that interfaces with optoelectronic or capacitive sensors. We focus on markets that require high quality and the technology leadership and integrated performance characteristic of our products. For the fiscal year ended October 29, 2017, or fiscal year 2017, our wired infrastructure segment contributed 48%, our wireless communications segment contributed 31%, our enterprise storage segment contributed 16%, and our industrial & other segment contributed 5% of our net revenue. For the fiscal year ended October 30, 2016, or fiscal year 2016, net revenue included contributions from BRCM commencing on February 1, 2016, which are included in the wired infrastructure and wireless communications segments. For the fiscal year

4

Table of Contents

ended November 1, 2015, or fiscal year 2015, net revenue included contributions from Emulex Corporation, or Emulex, commencing on May 6, 2015, which are included in the enterprise storage segment.
See discussion in the “Results of Operations” section included in Part II, Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations and Note 12. “Segment Information” included in Part II, Item 8. Financial Statements and Supplementary Data, of this Annual Report on Form 10-K for additional segment information.
The table below presents the major product families and their major applications in our reportable segments.
Segment
 
Major Applications
Major Product Families
Wired Infrastructure
 
•   Set-top Box (STB) and Broadband Access
•   STB SoCs
 
 
 
•   Cable, digital subscriber line (DSL) and passive optical networking (PON) central office/consumer premise equipment (CO/CPE) SoCs
 
 
•   Data center, Telecom, Enterprise and Small-and-Medium size Business/Remote-Office-Branch-Office (SMB)/(ROBO) Networking
•   Ethernet switching and routing application specific standard product (ASSP)
 
 
 
•   Embedded processors and controllers
 
 
 
•   Serializer/Deserializer (SerDes), application specific integrated circuits (ASICs)
 
 
 
•  Optical and copper, physical layer (PHYs)
 
 
 
•  Fiber optic laser and receiver components
 
 
 
 
Wireless Communications
 
•   mobile handsets
•   RF front end modules (FEMs), filters, power amplifiers
 
 
 
•   Wi-Fi, Bluetooth, global positioning system/global navigation satellite system (GPS/GNSS) SoCs
 
 
 
•   Custom touch controllers
 
 
 
 
Enterprise Storage
 
•   Servers and storage systems
•  Serial attached small computer system interface (SAS) and redundant array of independent disks (RAID) controllers and adapters

 
 
 
•  Peripheral component interconnect express (PCIe) switches
 
 
 
•   Fibre channel host bus adapters (HBA)
 
 
 
•   Fibre channel switches (starting fiscal year 2018)
 
 
•   Hard disk drives (HDD); Solid state drives (SSD)
•   Read channel based SoCs; Custom flash controllers
 
 
 
•   Preamplifiers
 
 
 
 
Industrial & Other
 
•   Power isolation, power conversion and renewable energy systems
•   Optocouplers
 
 
•   Factory automation, in-car infotainment and renewable energy systems
•   Industrial fiber optics
 
 
•   Motor controls and factory automation
•   Motion control encoders and subsystems
 
 
•   Displays and lighting
•   Light emitting diode (LEDs)
Wired Infrastructure Segment. We provide semiconductor solutions for enabling the STB and broadband access markets. We also provide a wide variety of semiconductor solutions which manage the movement of data in data center, telecom, enterprise and SMB/ROBO networking applications.
Set-Top Box Solutions: We offer complete SoC platform solutions for cable, satellite, Internet Protocol, over-the-top and terrestrial STBs. Our products enable global service providers to introduce new and enhanced technologies and services in STBs, including transcoding, digital video recording functionality, higher definition, increased networking capabilities, and more tuners to enable faster channel change and more simultaneous recordings. We are also enabling service providers in deploying High Efficiency Video Coding, or HEVC, a video compression format that is a successor to the H.264/MPEG-4 format. HEVC enables ultra-high definition, or Ultra HD, services by effectively doubling the capacity of existing networks to deploy new or existing content. Our families of STB solutions support the complete range of resolutions, from standard definition, to high definition, or HD, and Ultra HD.

5

Table of Contents

Broadband Access Solutions: We offer complete SoC platform solutions for DSL, cable and fiber for both central office deployments and CPE. For CPE deployments, we support broadband modems, wireless local area network, or WLAN, routers as well as residential gateway solutions. For central office deployment, our solutions include cable modem termination systems, for cable, optical line termination, for fiber, and DSL Access Multiplexer for DSL. Our products enable global service providers to continue to deploy next generation broadband access technologies across multiple standards, including DSL, cable and fiber, to provide more bandwidth and faster speeds to consumers. Over the coming years, we expect to see global service providers moving toward new technologies, including data over cable service interface specification, 3.1 for cable modem technologies, G.Fast for DSL, and deploying more fiber-based solutions to increase speeds and bandwidth for customers.
Ethernet Switching and Routing: Ethernet is a ubiquitous interconnection technology that enables high performance and cost effective networking infrastructure. We offer a broad set of Ethernet switching and routing products that are optimized for data center implementations, service provider networks, enterprise, and SMB/ROBO. In the data center market, our high capacity, low latency, switching silicon supports advanced protocols around virtualization and multi-pathing. Our Ethernet switching fabric technologies provide the ability to build highly scalable flat networks supporting tens of thousands of servers. Our service provider switch portfolio enables carrier/service provider networks to support a large number of services in the wireless backhaul, access, aggregation and core of their networks. For enterprise and SMB/ROBO applications, we offer product families that combine multi-layer switching capabilities and support lower power modes that comply with industry standards around energy efficient Ethernet.
Embedded processors and controllers: Our embedded processors leverage our ARM central processing unit and Ethernet switching technology to deliver SoCs for high performance embedded applications in a wide range of communication products such as voice-over-internet-protocol, telephony, point-of-sale devices and enterprise and retail access points and gateways. We offer a range of knowledge-based processors to enable high-performance decision-making for packet processing in a variety of advanced devices in the enterprise, metro, access, edge and core networking spaces. We also offer a range of Ethernet controllers for servers and workstations supporting multiple generations of Ethernet technology.
SerDes ASICs: For data center and enterprise networking, and high performance compute applications, we supply high speed SerDes technology integrated into ASICs. These ASICs are custom products built to individual customers specifications. Our ASICs are designed on advanced CMOS process technologies, focused primarily on leading edge geometries.
Physical Layer Devices: These devices, also referred to as PHYs, are transceivers which enable the reception and transmission of Ethernet data packets over a physical medium such as copper wire or optical fibers. Our high performance Ethernet transceivers are built upon a proprietary digital signal processing communication architecture optimized for high-speed network connections and support the latest standards and advanced features, such as energy efficient Ethernet, data encryption and time synchronization. We also offer a range of automotive Ethernet products to meet growing consumer demand for in-vehicle connectivity.
Fiber optic components: We supply optical laser and receiver components to the Ethernet networking, storage, and access, metro- and long-haul telecommunication markets. Our optical components enable the high speed reception and transmission of data through optical fibers.
Wireless Communications Segment.  We support the wireless communications industry with a broad variety of RF semiconductor devices, connectivity solutions and custom touch controllers. Devices incorporating our wireless solutions include mobile handsets and tablets.
RF Semiconductor Devices: Our RF semiconductor devices selectively filter, as well as amplify, RF signals. Filters enable modern wireless communication systems to support a large number of subscribers simultaneously by ensuring that the multiple transmissions and receptions of voice and data streams do not interfere with each other. We were among the first to deliver commercial film bulk acoustic resonator, or FBAR, filters that offer technological advantages over competing filter technologies, to allow mobile handsets to function more efficiently in today's congested RF spectrum. FBAR technology has a significant market share within the cellular handset market. As cellular carriers continue to move to 4G/long-term evolution, or LTE, and LTE-advanced standards worldwide, we believe these technological advantages will continue to benefit our business. Our RF products include FEMs that incorporate multiple die into multi-function RF devices, duplexers and multiplexers, which are a combination of two or more transmit and receive filters in a single device, using our proprietary FBAR technology, discrete filters and discrete power amplifiers.
Our expertise in FBAR technology, amplifier design, and module integration enables us to offer industry-leading performance in cellular RF transceiver applications. Our proprietary GaAs wafer manufacturing processes are critical to the production of power amplifier and low noise amplifier products.

6

Table of Contents

Connectivity solutions: Our connectivity solutions include discrete and integrated Wi-Fi and Bluetooth solutions, location (GPS/GNSS) controllers and touch controllers.
Wi-Fi allows devices on a local area network to communicate wirelessly, adding the convenience of mobility to the utility of high-speed data networks. We offer a family of high performance, low power Wi-Fi chipsets. Bluetooth is a low power technology that enables direct connectivity between devices. We offer a complete family of Bluetooth silicon and software solutions that enable manufacturers to easily and cost-effectively add Bluetooth functionality to virtually any device. These solutions include combination chips that offer integrated Wi-Fi and Bluetooth functionality, which provides significant performance advantages over discrete solutions.
We also offer a family of GPS, assisted-GPS (A-GPS) and GNSS semiconductor products, software and data services. These products are part of a broader location platform that leverages a broad range of communications technologies, including Wi-Fi, Bluetooth and GPS, to provide more accurate location and navigation capabilities.
Custom Touch Controllers: Our touch controllers process signals from touch screens in mobile handsets and tablets.
Enterprise Storage Segment.  Our enterprise storage products enable secure movement of digital data to and from host machines such as servers, personal computers and storage systems to the underlying storage devices such as HDDs and SSDs.
Fibre Channel Switch Products: The Fibre Channel switch products we acquired in connection with our acquisition of Brocade provide interconnection, bandwidth, and high-speed switching between servers and storage devices which are in a FC SAN. FC SANs are networks dedicated to mission critical storage traffic, and enable simultaneous high speed and secure connections among multiple host computers and multiple storage arrays.
SAS, RAID and PCIe Products: We provide SAS and RAID controller and adapter solutions to server and storage system OEMs. These solutions enable secure and high speed data transmission between a host computer, such as a server, and storage peripheral devices, such as HDD, SSD and optical disk drives and disk and tape-based storage systems. Some of these solutions are delivered as stand-alone semiconductors, typically as a controller. Other solutions are delivered as circuit boards, known as adapter products, which incorporate our semiconductors onto a circuit board with other features. RAID technology is a critical part of our server storage connectivity solutions as it provides protection against the loss of critical data resulting from HDD failures.
We also provide interconnect semiconductors that support the PCI and PCIe communication standards. PCIe is the primary interconnection mechanism inside computing systems today. 
Fibre Channel Products: We provide Fibre Channel HBAs, which connect host computers such as servers to FC SANs.
HDD and SSD products: We provide read channel-based SoCs and preamplifiers to HDD OEMs. These are the critical chips required to read, write and protect data. An HDD SoC is an integrated circuit, or IC, that combines the functionality of a read channel, serial interface, memory and a hard disk controller in a small, high-performance, low-power and cost-effective package. Read channels convert analog signals that are generated by reading the stored data on the physical media into digital signals. In addition, we sell preamplifiers, which are used to amplify the initial signal to and from the drive disk heads so the signal can be processed by the read channel.
We also provide custom flash controllers to SSD OEMs. An SSD stores data in flash memory instead of on a hard disk, providing high speed access to the data. Flash controllers manage the underlying flash memory in SSDs, performing critical functions such as reading and writing data to and from the flash memory and performing error correction, wear leveling and bad block management.
Industrial & Other.  We provide a broad variety of products for the general industrial and automotive markets. This segment also includes IP licensing revenue.
Optocouplers: We offer optical isolators, or optocouplers, which provide electrical insulation and signal isolation for signaling systems that are susceptible to electrical noise or interference. Optocouplers are used in a diverse set of applications, including industrial motors, automotive systems including those used in hybrid engines, power generation and distribution systems, switching power supplies, motion sensors, telecommunications equipment, computers and office equipment, plasma displays, and military electronics.
Industrial Fiber Optics: For industrial networking, we provide fast optical transceivers using plastic optical fiber that enable quick and interoperable networking and factory automation.
Motion Encoders: For industrial motors and robotic motion control, we supply optical encoders, as well as ICs for the controller and decoder functions.
LEDs: For electronic signs and signals, we supply LED assemblies that offer high brightness and stable light output over thousands of hours, enabling us to support traffic signals, large commercial signs and other displays.

7

Table of Contents

Research and Development
We are committed to continuous investment in product development, with a focus on rapidly introducing new, proprietary products. Many of our products have grown out of our own research and development efforts, and have given us competitive advantages in certain target markets due to performance differentiation. However, from time to time we also seek to enhance our capabilities through the acquisition of engineers with complementary research and development skills and complementary technologies and businesses. We focus our research and development efforts on the development of innovative, sustainable and higher value product platforms. We leverage our design capabilities in markets where we believe our innovation and reputation will allow us to earn attractive margins by developing high value-add products.
We plan to continue investing in product development, both organically and through acquisition, to drive growth in our business. We also invest in process development and fabrication capabilities to optimize processes for devices that are manufactured internally. Our field application engineers and design engineers are located in many places around the world, and in many cases near our top customers. This enhances our customer reach and our visibility into new product opportunities and enables us to support our customers in each stage of their product development cycle, from early stages of production design through to volume manufacturing and future growth. By collaborating with our customers, we have opportunities to develop high value-added, customized products for them that leverage our existing technologies. Research and development expense was $3.3 billion, $2.7 billion and $1.0 billion for fiscal years 2017, 2016 and 2015, respectively. These amounts included share-based compensation expense of $636 million, $430 million and $107 million for fiscal years 2017, 2016 and 2015, respectively. We anticipate that we will continue to make significant research and development expenditures in order to maintain our competitive position, and with a continuous flow of innovative and sustainable product platforms.
Customers, Sales and Distribution
We sell our products to a wide variety of OEMs or their contract manufacturers, distributors and end customers. Certain customers require us to contract with them directly and with specified intermediaries, such as contract manufacturers, and both they and their contract manufacturers often require time-critical delivery of our products to multiple locations around the world. Historically, a relatively small number of customers have accounted for a significant portion of our net revenue. Sales to distributors accounted for 28% and 30% of our net revenue for fiscal years 2017 and 2016, respectively. Direct sales to Foxconn Technology Group companies (including Hon Hai Precision Industries), together referred to as Foxconn, accounted for 14% of our net revenue for both fiscal years 2017 and 2016. We believe our aggregate sales to our top five end customers, through all channels, accounted for more than 40% of our net revenue for fiscal year 2017 and more than 30% for fiscal year 2016. We believe aggregate sales to Apple, Inc., through all channels, accounted for more than 20% of our net revenue for fiscal year 2017 and approximately 15% for fiscal year 2016. We expect to continue to experience significant customer concentration in future periods. The loss of, or significant decrease in demand from, any of our top five end customers could have a material adverse effect on our business, results of operations and financial condition.
We sell our products through our direct sales force and a select network of distributors globally. Our direct sales force is focused on supporting our large OEM customers. Our sales force has specialized product and service knowledge that enables us to sell specific offerings at key levels throughout a customer’s organization.
We have sales offices located in various countries, with a significant presence in Asia, which is a key center of the worldwide electronics supply chain. Many of our customers design products in North America or Europe that are then manufactured in Asia. We also maintain dedicated regional customer support call centers, where we address customer issues and handle logistics and other order fulfillment requirements.
We have strategically developed distributor relationships to serve thousands of customers around the world. A significant amount of our sales are to large global electronic components distributors, including Avnet, Inc., complemented by a number of regional distributors with customer relationships based on their respective product ranges.
We believe we are well-positioned to support our customers throughout the design, technology transfer and manufacturing stages across all geographies.
Operations
The majority of our front-end wafer manufacturing operations is outsourced to external foundries, including Taiwan Semiconductor Manufacturing Company Limited, or TSMC, primarily, as well as United Microelectronics Corporation, Semiconductor Manufacturing International Corporation, GlobalFoundries Inc., TowerJazz and WIN Semiconductors Corp. We use third-party contract manufacturers for a significant majority of our assembly and test operations, including Advanced Semiconductor Engineering, Inc., Amkor Technology, Inc., Siliconware Precision Industries Co., Ltd., Inari Technology SDN BHD and Flextronics Telecom Systems, Ltd. We use our internal fabrication facilities for products utilizing our innovative and proprietary processes, to protect our IP and to accelerate time to market for our products. Examples of internally fabricated

8

Table of Contents

semiconductors include our FBAR filters for wireless communications and our vertical-cavity surface emitting laser-based and InP-based lasers for fiber optic communications. The majority of our internal III-V semiconductor wafer fabrication is done in the United States and Singapore. Many of our products are designed to be manufactured in a specific process, typically at one particular foundry, either our own or with a particular contract manufacturer, and in some instances, we may only qualify one contract manufacturer to manufacture certain of our products.
We store the majority of our product inventory in our warehouse in Malaysia. However, for selected customers, we maintain finished goods inventory near or at customer manufacturing sites to support their just-in-time production.
Materials and Suppliers
Our manufacturing operations employ a wide variety of semiconductors, electromechanical components and assemblies and raw materials. We purchase materials from hundreds of suppliers on a global basis. These supply relationships are generally conducted on a purchase order basis. While we have not experienced any significant difficulty in obtaining the materials used in the conduct of our business and we believe that no single supplier is material, some of the parts are not readily available from alternate suppliers due to their unique design or the length of time necessary for re-design or qualification. Our long-term relationships with our suppliers allow us to proactively manage our technology development and product discontinuance plans, and to monitor our suppliers' financial health. Some suppliers may, nonetheless, extend their lead times, limit supplies, increase prices or cease to produce necessary parts for our products. If these are unique or highly specialized components, we may not be able to find a substitute quickly, or at all. To address the potential disruption in our supply chain, we may use a number of techniques, including, in some cases, qualifying more than one source of supply, redesigning products for alternative components and incremental, or in some cases "lifetime," purchases of affected parts for supply buffer.
Competition
The global semiconductor market is highly competitive. Our competitors range from large, international companies offering a wide range of products to smaller companies specializing in narrow markets. We compete with integrated device manufacturers, or IDMs, and fabless semiconductor companies, as well as the internal resources of large, integrated OEMs. The competitive landscape is changing as a result of a trend toward consolidation within the industry, as some of our competitors have merged with or been acquired by other competitors while others have begun collaborating with each other. We expect this consolidation trend to continue. We expect competition in the markets in which we participate to continue to increase as existing competitors improve or expand their product offerings and as new companies enter the market. Additionally, our ability to compete effectively depends on a number of factors, including: quality, technical performance, price, product features, product system compatibility, system-level design capability, engineering expertise, responsiveness to customers, new product innovation, product availability, delivery timing and reliability, and customer sales and technical support.
Our primary competitors in the wired infrastructure segment are Cavium Inc., Intel Corp., Finisar Corp., GlobalFoundries, HiSilicon Technologies Co. Ltd., Lumentum Operations LLC, MACOM Technology Solutions Holdings, Inc., Marvell Corp., Mediatek Inc., Mellanox Technologies, Mitsubishi Electric Corporation, NXP Semiconductors N.V., Quantenna Inc., ST Microelectronics N.V., and Sumitomo Corporation. We compete based on the strength of our high speed proprietary design expertise, our customer relationships, and broad product portfolio.
Our primary competitors in the wireless communications segment are Murata Manufacturing Co., Ltd., Qorvo, Inc., Qualcomm, Skyworks Solutions, Inc., and TDK-EPC Corporation. We compete based on our expertise in FBAR technology, amplifier design, module integration and proprietary material processes.
Our primary competitors in the enterprise storage segment include Cavium Inc., Marvell Technology Group, Ltd., Microsemi Corp., and Texas Instruments, Inc. We compete based on our expertise in multiple storage protocols and mixed-signal design. With the acquisition of Brocade, we will also compete with Cisco Systems, Inc. with respect to our Fibre Channel switch products.
Our primary competitors in the industrial & other segment are Analog Devices, Inc., Cree, Inc., Hamamatsu Photonics K.K., Heidenhain Corporation, Renesas Electronics Corporation and Toshiba Corporation. We compete based on our design expertise, broad product portfolio, reputation for quality products and large customer base.
Intellectual Property
Our success depends in part upon our ability to protect our IP. To accomplish this, we rely on a combination of IP rights, including patents, copyrights, trademarks, service marks, trade secrets and similar IP, as well as customary contractual protections with our customers, suppliers, employees and consultants, and through security measures to protect our trade secrets. We believe our current product expertise, key engineering talent and IP portfolio provide us with a strong platform from which to develop application specific products in key target markets.

9

Table of Contents

As of October 29, 2017, we had 24,250 U.S. and other patents and 2,061 U.S. and other pending patent applications. Our research and development efforts are presently resulting in approximately 150 new patent applications per year, relating to a wide range of ASIC, isolation, encoder, LED, RF and optoelectronic components, enterprise storage products, HDD silicon, PCIe, USB and other standard I/O devices, Ethernet and Fibre-Channel connectivity and controllers, set-top box SoCs, cable modem SoCs, broadband access SoCs, wireless connectivity SoCs, switching/routing SoCs, high performance processor SoCs and associated applications. The expiration dates of our patents range from 2018 to 2036, with a small number of patents expiring in the near future, none of which are expected to be material to our IP portfolio. We are not substantially dependent on any single patent or group of related patents.
We focus our patent application program to a greater extent on those inventions and improvements that we believe are likely to be incorporated into our products, as contrasted with more basic research. However, we do not know how many of our pending patent applications will result in the issuance of patents or the extent to which the examination process could require us to narrow our claims.
We and our predecessors have also entered into a variety of IP licensing and cross-licensing arrangements that have both benefited our business and enabled some of our competitors. A portion of our revenue comes from IP licensing royalty payments and from technology claim settlements relating to such IP. We also license in third-party technologies that are incorporated into some elements of our design activities, products and manufacturing processes. Historically, licenses of the third-party technologies used by us have generally been available to us on acceptable terms.
The semiconductor industry is characterized by the existence of a large number of patents, copyrights, trademarks and trade secrets and by the vigorous pursuit, protection and enforcement of IP rights, including by patent holding companies that do not make or sell products. Many of our customer agreements require us to indemnify our customers for third-party IP infringement claims. Claims of this sort could harm our relationships with our customers and might deter future customers from doing business with us. With respect to any IP rights claims against us or our customers or distributors, we may be required to cease manufacture of the infringing product, pay damages, expend resources to develop non-infringing technology, seek a license which may not be available on commercially reasonable terms or at all, or relinquish patents or other IP rights.
Employees
As of October 29, 2017, we had approximately 14,000 employees worldwide. By geography, approximately 55% of our employees are located in North America, 38% in Asia, and 7% in Europe, the Middle East and Africa. In the United States, none of our employees are represented by a labor union. In Singapore, approximately 270 of our 829 employees are subject to a collective bargaining agreement. A small number of our employees in other countries is represented by workers' councils or labor unions.
Environmental and Other Regulation
Our research and development and manufacturing operations involve the use of hazardous substances and are regulated under international, federal, state and local laws governing health, safety and the environment. These regulations include limitations on discharge of pollutants to air, water, and soil; remediation requirements; product chemical content limitations; manufacturing chemical use and handling restrictions; pollution control requirements; waste minimization considerations; and treatment, transport, storage and disposal of solid and hazardous wastes. We are also subject to regulation by the United States Occupational Safety and Health Administration and similar health and safety laws in other jurisdictions.
We believe that our properties and operations at our facilities comply in all material respects with applicable environmental laws and worker health and safety laws. However, the risk of environmental liabilities cannot be completely eliminated and there can be no assurance that the application of environmental, health and safety laws to our business will not require us to incur significant expenditures.
We are also regulated under a number of international, federal, state and local laws regarding recycling, product packaging and product content requirements, including legislation enacted in the United States, European Union and China, among a growing number of jurisdictions, which have placed greater restrictions on the use of lead, among other chemicals, in electronic products, which affects materials composition and semiconductor packaging. These laws are becoming more stringent and may in the future cause us to incur significant expenditures.
Backlog
Our sales are generally made pursuant to short-term purchase orders. These purchase orders are made without deposits and may be, and often are, rescheduled, canceled or modified on relatively short notice, without substantial penalty. Therefore, we believe that purchase orders or backlog are not necessarily a reliable indicator of future sales.

10

Table of Contents

Seasonality
Historically, our net revenue has typically been higher in the second half of the fiscal year than in the first half, primarily due to seasonality in our wireless communications segment. This segment has historically experienced seasonality due to launches of new mobile handsets manufactured by our OEM customers. However, from time to time, typical seasonality and industry cyclicality are overshadowed by other factors such as wider macroeconomic effects, the timing of significant product transitions and launches by large OEMs, particularly in the wireless communications segment. We have a diversified business portfolio and our wired infrastructure segment represents the largest portion of our net revenue. We believe that our overall revenue is less susceptible to seasonal variations as a result of the diversification of our business portfolio.
Financial Information about Geographic Areas
For information on the geographic concentration of our net revenue and long-lived assets, please see Note 12. “Segment Information” included in Part II, Item 8. of our consolidated financial statements, included elsewhere in the Annual Report on Form 10-K.
Other Information
Broadcom Limited was incorporated under the laws of the Republic of Singapore in March 2015 and is successor to Avago Technologies Limited, which was incorporated under the laws of the Republic of Singapore in August 2005. Our Singapore company registration number is 201505572G. The address of our registered office and our principal executive offices is 1 Yishun Avenue 7, Singapore 768923, and our telephone number there is +65-6755-7888. Our ordinary shares are listed on the Nasdaq Global Select Market under the trading symbol “AVGO”.
Broadcom Cayman, L.P. was formed under the laws of the Cayman Islands in May 2015. The address of the Partnership’s registered office is P.O. Box 309, Ugland House, Grand Cayman, KY1-104, Cayman Islands. The address of the Partnership’s principal executive offices is 1 Yishun Avenue 7, Singapore 768923, and the telephone number there is +65-6755-7888.
Broadcom Limited is subject to the information and periodic reporting requirements of the Securities Exchange Act of 1934, or Exchange Act, and, in accordance therewith, files periodic reports, proxy statements and other information with the SEC. In addition, the Partnership restricted exchangeable units, or Partnership REUs, are deemed to be registered under Section 12(b) of the Exchange Act and the Partnership is subject to the informational requirements of the Exchange Act and the rules and regulations promulgated thereunder.
Such periodic reports, proxy statements and other information is available for inspection and copying at the SEC’s Public Reference Room at 100 F Street, NE, Washington, DC 20549 or may be obtained by calling the SEC at 1–800–SEC–0330. In addition, the SEC maintains a website at http://www.sec.gov that contains reports, proxy statements and other information regarding issuers that file electronically with the SEC. We maintain a website at www.broadcom.com. You may access our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and other reports (and amendments thereto) filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act with the SEC, as well as, proxy statements filed by Broadcom Limited, free of charge at the “Investor Center — SEC Filings” section of our website at www.broadcom.com, as soon as reasonably practicable after such material is electronically filed with, or furnished to, the SEC. The reference to our website address does not constitute incorporation by reference of the information contained on or accessible through our website.

11

Table of Contents

ITEM 1A.
RISK FACTORS
As noted above, Broadcom is the successor to Avago. Following the acquisition of BRCM, on February 1, 2016, Broadcom became the ultimate parent company of Avago and BRCM. Financial information and results of operations presented in this Annual Report on Form 10-K for periods prior to February 1, 2016 relate to Avago and relate to us for the periods after February 1, 2016.
Our business, operations and financial results are subject to various risks and uncertainties, including those described below, that could adversely affect our business, financial condition, results of operations, cash flows, and the trading price of our ordinary shares. The following important factors, among others, could cause our actual results to differ materially from historical results and those expressed in forward-looking statements made by us or on our behalf in filings with the SEC, press releases, communications with investors and oral statements.
Risks Related to Our Business
The majority of our sales comes from a small number of customers and a reduction in demand or loss of one or more of our significant customers may adversely affect our business.
We are dependent on a small number of end customers, OEMs, their respective contract manufacturers, and certain distributors for a majority of our business, revenue and results of operations. Sales to distributors accounted for 28% and 30% of our net revenue for fiscal years 2017 and 2016, respectively. Direct sales to Foxconn accounted for 14% of our net revenue for both fiscal years 2017 and 2016. We believe our aggregate sales to our top five end customers, through all channels, accounted for more than 40% of our net revenue for fiscal year 2017 and more than 30% for fiscal year 2016. We believe aggregates sales to Apple, Inc., through all channels, accounted for more than 20% of our net revenue for fiscal year 2017 and approximately 15% for fiscal year 2016. This customer concentration increases the risk of quarterly fluctuations in our operating results and our sensitivity to any material, adverse developments experienced by our significant customers.
In addition, our top customers’ purchasing power has, in some cases, given them the ability to make greater demands on us with regard to pricing and contractual terms in general. We expect this trend to continue, which may adversely affect our gross margin on certain products and, should we fail to comply with such terms, might also result in substantial liability that could harm our business, financial condition and results of operations.
Moreover, the terms and conditions under which we do business with most of our customers generally do not include commitments by those customers to purchase any specific quantities of products from us. Even in those instances where we enter into an arrangement under which a customer agrees to source an agreed portion of its product needs from us (provided that we are able to meet specified development, supply and quality commitments), the arrangement often includes pricing schedules or methodologies that apply regardless of volume of products purchased, and those customers may not purchase the amount of product we expect. As a result, we may not generate the amount of revenue or the level of profitability we expect under such arrangements. If we do not perform under these arrangements, we could also be liable for significant monetary damages.
The loss of, or any substantial reduction in sales to, any of our major customers could have a material adverse effect on our business, financial condition and results of operations and cash flows.
Dependence on contract manufacturing and suppliers of critical components within our supply chain may adversely affect our ability to bring products to market, damage our reputation and adversely affect our results of operations.
We operate a primarily outsourced manufacturing business model that principally utilizes third-party wafer foundry and module assembly and test capabilities, referred to as contract manufacturers. Our products require semiconductor wafer manufacturers with state-of-the-art fabrication equipment and techniques, and most of our products are designed to be manufactured in a specific process, typically at one particular fab or foundry, either our own or with a particular contract manufacturer.
We depend on our contract manufacturers to allocate sufficient manufacturing capacity to meet our needs, to produce products of acceptable quality at acceptable yields, and to deliver those products to us on a timely basis. Although we often have long-term contracts with our contract manufacturers, we do not generally have long-term capacity commitments. We obtain substantially all of our manufacturing services on a purchase order basis and our contract manufacturers have no obligation to provide us with any specified minimum quantities of product. Further, from time to time our contract manufacturers will cease to, or will become unable to, manufacture a component for us. As the lead time needed to identify, qualify and establish reliable production, at acceptable yields, with a new contract manufacturer is typically lengthy, there is often no readily available alternative source for the wafers or other contract manufacturing services we require, and there may be other constraints on our ability to change contract manufacturers. In addition, qualifying such manufacturers is often expensive, and they may not produce products as cost-effectively as our current suppliers, which would reduce our margins. In any such circumstances, we may be unable to meet our customer demand and may fail to meet our contractual obligations.

12

Table of Contents

This could result in the payment of significant damages by us to our customers, and our net revenue could decline, adversely affecting our business, financial condition and results of operations.
We utilize TSMC to produce the substantial majority of our semiconductor wafers. TSMC manufactured approximately three-quarters of the wafers manufactured by our contract manufacturers during the fiscal year ended October 29, 2017. Our wafer requirements represent a significant portion of the total production capacity of TSMC. However, TSMC also fabricates wafers for other companies, including certain of our competitors, and could choose to prioritize capacity for other users or reduce or eliminate deliveries to us on short notice, or raise their prices to us, all of which could harm our business, results of operations and gross margin.
Any substantial disruption in TSMC’s supply of wafers to us, or in the other contract manufacturing services that we utilize, as a result of a natural disaster, political unrest, economic instability, equipment failure or other cause, could materially harm our business, customer relationships and results of operations.
We also depend on our third-party contract manufacturers to timely develop new, advanced manufacturing processes, including, in the case of wafer fabrication, transitions to smaller geometry process technologies. If these new processes are not timely developed or we do not have sufficient access to them, we may be unable to maintain or increase our manufacturing efficiency to the same extent as our competitors or deliver products to our customers, which could result in loss of revenue opportunities and damage our relationships with our customers.
We purchase a significant amount of the materials used in our products from a limited number of suppliers.
Our manufacturing processes rely on many materials, including silicon, GaAs and InP wafers, copper lead frames, precious and rare earth metals, mold compound, ceramic packages and various chemicals and gases. We purchase a significant portion of our semiconductor materials and finished goods used in our products from a few materials providers, some of which are single source suppliers. During the fiscal year ended October 29, 2017, we purchased approximately two-thirds of the materials for our manufacturing processes from five materials providers. Substantially all of our purchases are on a purchase order basis, and we do not generally have long-term contracts with our materials providers. Suppliers may extend lead times, limit supplies or increase prices due to commodity price increases, capacity constraints or other factors, which may lead to interruption of supply or increased demand in the industry. In the event that we cannot timely obtain sufficient quantities of materials or at reasonable prices, the quality of the material deteriorates or we are not able to pass on higher materials or energy costs to our customers, our business, financial condition and results of operations could be adversely impacted.
We may pursue acquisitions, investments, joint ventures and dispositions, which could adversely affect our results of operations.
Our growth strategy includes the acquisition of, and investment in, businesses that offer complementary products, services and technologies, augment our market coverage, or enhance our technological capabilities, such as our acquisition of Brocade. We may also enter into strategic alliances or joint ventures to achieve these goals. We may not be able to identify suitable acquisition, investment, alliance, or joint venture opportunities, or to consummate any such transactions. In addition, our original estimates and assumptions used in assessing any transaction that we make may be inaccurate and we may not realize the expected financial or strategic benefits of any such transaction, including our acquisition of Brocade.
Any acquisitions we may undertake involve risks and uncertainties, such as unexpected delays, challenges and related expenses, and diversion of management’s attention. For example, regulatory approvals required in connection with an acquisition, such as those from the U.S. Department of Justice or the Federal Trade Commission, may take longer than anticipated to obtain, may not be obtained at all or may contain materially burdensome conditions. If any conditions or changes to the structure of an acquisition are required to obtain these regulatory approvals, they may have the effect of jeopardizing or delaying completion of such acquisition or reducing our anticipated benefits of the transaction. If we agree to any material conditions in order to obtain any such approvals or if we fail to comply with any such conditions, our business and results of operations may be adversely affected. For example, if we do not complete our redomiciliation within one year from the closing, we agreed to initiate a process to separate and divest the Brocade SAN business. If we fail to complete an acquisition, our share price could fall to the extent the price reflects an assumption that such acquisition will be completed, and we may have incurred significant unrecoverable costs. Further, the failure to consummate an acquisition may result in negative publicity and adversely impact our relationships with our customers, vendors and employees. We may become subject to legal proceedings relating to the acquisition and the integration of acquired businesses may not be successful. The integration of an acquired business involves significant challenges, including, among others: minimizing the disruption of our business, diversion of management’s attention from daily operations and integrating the personnel of acquired businesses; incurring significant restructuring charges and amortization expense, assuming liabilities and ongoing lawsuits, potential impairment of acquired goodwill and other intangible assets, and increasing our expenses and working capital requirements; and implementing our management information systems, operating systems and internal controls over the acquired operations. These difficulties may be complicated by factors such as the size of the business or entity acquired, geographic

13

Table of Contents

distances and cultural differences, lack of experience operating in the geographic markets or industry sectors of the acquired business, potential loss of key employees and customers, the potential for deficiencies in internal controls at the acquired or combined business, performance problems with the acquired business’ technology, exposure to unanticipated liabilities of the acquired business, insufficient revenue to offset increased expenses associated with the acquisition, adverse tax consequences and our potential inability to achieve the growth prospects or synergies expected from any such acquisition.
Failure to manage and successfully integrate the acquisitions we make, or to improve margins of the acquired businesses and products, could materially harm our business, operating results and margins.
Any future acquisitions we make may require significant additional debt or equity financing, which, in the case of debt financing, would increase our leverage and potentially negatively affect our credit ratings, and in the case of an equity or equity-linked financing, would be dilutive to our existing shareholders. Any downgrades in our credit ratings could adversely affect our ability to borrow by resulting in more restrictive borrowing terms or increased borrowing costs. As a result, we may be unable to complete acquisitions or other strategic transactions in the future to the same extent as in the past, or at all. These and other factors could harm our ability to achieve anticipated levels of profitability of acquired businesses or realize other anticipated benefits of an acquisition, and could adversely affect our business, financial condition and results of operations.
We recently made an offer to acquire all of the outstanding shares of Qualcomm. We do not yet know the outcome of this proposed acquisition. However, any such transaction will be subject to all of the risks discussed above, and we will need to incur a significant amount of indebtedness to fund the transaction.
From time to time, we may also seek to divest or wind down portions of our business that are not strategically important, both acquired or otherwise, such as the Brocade IP Networking business, or we may exit minority investments, each of which could materially affect our cash flows and results of operations. Any future dispositions we may make could involve risks and uncertainties, including our ability to sell such businesses on terms acceptable to us, or at all. In addition, any such dispositions could result in disruption to other parts of our business, potential loss of employees or customers, exposure to unanticipated liabilities or result in ongoing obligations and liabilities to us following any such dispositions. For example, in connection with such dispositions, we often enter into transition services agreements or other strategic relationships, including long-term research and development arrangements, sales arrangements or agree to provide certain indemnities to the purchaser in any such transaction, which may result in additional expense and may adversely affect our financial condition and results of operations. In addition, dispositions may include the transfer of technology and/or the licensing of certain IP rights to third-party purchasers, which could limit our ability to assert our IP rights against such third-party purchasers.
Failure to adjust our manufacturing and supply chain to accurately meet customers demand could adversely affect our results of operations.
We make significant decisions, including determining the levels of business that we will seek and accept, production schedules, levels of reliance on contract manufacturing and outsourcing, internal fabrication utilization and other resource requirements, based on our estimates of customer requirements. Factors that can impact our ability to accurately estimate future customer requirements include the short-term nature of many customers’ commitments, our customers’ ability to reschedule, cancel and modify orders with little or no notice and without significant penalty, the accuracy of our customers’ forecasts and the possibility of rapid changes in demand for our customers’ products, as well as seasonal or cyclical trends in their industries or the semiconductor industry.
To ensure availability of our products, particularly for our largest customers, we typically start manufacturing our relevant products based on our customers’ forecasts, which are not binding. As a result, we incur inventory and manufacturing costs in advance of anticipated sales that may never materialize or which may be substantially lower than expected. If actual demand for our products is lower than forecast, we may also experience higher inventory carrying and operating costs and product obsolescence. Because certain of our sales, research and development, and internal manufacturing overhead expenses are relatively fixed, a reduction in customer demand may also decrease our gross margin and operating income.
Conversely, customers often require rapid increases in production on short notice. We may be unable to secure sufficient materials or contract manufacturing capacity to meet such increases in demand. This could damage our customer relationships, reduce revenue growth and margins, subject us to additional liabilities, harm our reputation, and prevent us from taking advantage of opportunities.
We are dependent on a limited number of markets, and dynamics in these markets could negatively impact our business or results of operations. 
We operate in a limited number of markets. If demand in these markets declines or grows at a significantly slower pace than expected, our results may be adversely affected. The success of our wired infrastructure segment is primarily dependent on information technology, or IT, and data center spending, which can vary dramatically from quarter to quarter, consumer

14

Table of Contents

demand for traditional pay-TV services, capital expenditures on the installation of broadband capacity and our ability to transition our products to increasingly smaller line width geometries. Our wireless communications segment is primarily dependent on the mobile handset market, which is characterized by intense competition, rapidly evolving technologies and changing consumer preferences, and our success is dependent on the overall demand for mobile handsets and macroeconomic conditions in general, as well as the relative success of the mobile handsets into which our products are incorporated.
Similar to our wired infrastructure segment, our enterprise storage segment is dependent on data center spending, as well as HDD-related sales. In addition, the shift to cloud-based IT solutions and services, such as hyperscale computing, may adversely affect both our wired infrastructure and enterprise storage segments. We currently sell a substantial portion of our products for use in traditional enterprise data centers. As cloud-based IT solutions become more prevalent, our results of operations will suffer if we are unable to increase sales of our products to cloud-based data center providers.
We are subject to risks associated with our distributors, including product inventory levels and product sell-through.
We sell many of our products through distributors who maintain their own inventory of our products for sale to dealers and end customers. Sales to distributors accounted for 28% of our net revenue in the fiscal year ended October 29, 2017. If our distributors are unable to sell an adequate amount of their inventory of our products in a given quarter or if they decide to decrease their inventories for any reason, our sales to these distributors and our revenue may decline. We also face the risk that our distributors may increase inventory levels of our products in any particular quarter in excess of future anticipated sales. If such sales do not occur in the time frame anticipated by these distributors for any reason, these distributors may substantially decrease the amount of product they order from us in subsequent periods until their inventory levels realign with end customer demand, which would harm our business and could adversely affect our revenue in such subsequent periods. We have streamlined the number of distributors we use, making us increasingly dependent on our remaining distributors, which may exacerbate the foregoing risks and increase our related credit risk.
We do not always have a direct relationship with the end customers of our products sold through distributors. As a result, our products may be used in applications for which they were not necessarily designed or tested, including, for example, medical devices, and they may not perform as anticipated in such applications. In such event, failure of even a small number of parts could result in significant liabilities to us, damage our reputation and harm our business and results of operations.
Our business would be adversely affected by the departure of existing members of our senior management team.
Our success depends, in large part, on the continued contributions of our senior management team, and in particular, the services of Mr. Hock E. Tan, our President and Chief Executive Officer. None of our senior management is bound by written employment contracts. In addition, we do not currently maintain key person life insurance covering our senior management. The loss of any of our senior management could harm our ability to implement our business strategy and respond to the rapidly changing market conditions in which we operate.
Our operating results are subject to substantial quarterly and annual fluctuations.
Our revenue and operating results have fluctuated in the past and are likely to fluctuate in the future. These fluctuations may occur on a quarterly and annual basis and are due to a number of factors, many of which are beyond our control. These factors include, among others:
customer concentration and the gain or loss of significant customers;
the timing of launches by our customers of new products, such as mobile handsets, in which our products are included and changes in end-user demand for the products manufactured and sold by our customers;
changes in our product mix or customer mix and their effect on our gross margin;
the timing of receipt, reduction or cancellation of significant orders by customers;
fluctuations in the levels of component inventories held by our customers;
utilization of our internal manufacturing facilities and fluctuations in manufacturing yields;
our ability to successfully and timely integrate, and realize the benefits of acquisitions we may make and the timing of acquisitions or dispositions of, or making and exiting investments in, other entities, businesses or technologies;
changes in our tax structure or incentive arrangements, which may adversely affect our net tax expense and our cash flow in any quarter in which such an event occurs;
our ability to develop, introduce and market new products and technologies on a timely basis;

15

Table of Contents

the timing and extent of our non-product revenue, such as product development revenue and royalty and other payments from IP sales and licensing arrangements;
new product announcements and introductions by us or our competitors;
seasonality or other fluctuations in our markets;
IP disputes and associated litigation expense;
timing and amount of research and development and related new product expenditures, and the timing of receipt of any research and development grant monies;
significant warranty claims, including those not covered by our suppliers or our insurers;
availability and cost of raw materials and components from our suppliers;
timing of any regulatory updates, particularly with respect to tax reform;
fluctuations in currency exchange rates;
loss of key personnel or the shortage of available skilled workers; and
the effects of competitive pricing pressures, including decreases in average selling prices of our products.
The foregoing factors are often difficult to predict, and these, as well as other factors, could materially adversely affect our quarterly or annual operating results. In addition, a significant amount of our operating expenses are relatively fixed in nature due to our significant sales, research and development and internal manufacturing overhead costs. Any failure to adjust spending quickly enough to compensate for a revenue shortfall could magnify the adverse impact of such revenue shortfall on our results of operations. As a result, we believe that quarter-to-quarter comparisons of our revenue and operating results may not be meaningful or a reliable indicator of our future performance. If our operating results in one or more future quarters fail to meet the expectations of securities analysts or investors, an immediate and significant decline in the trading price of our ordinary shares may occur.
If we are unable to attract and retain qualified personnel, especially our design and technical personnel, we may not be able to execute our business strategy effectively.
Our future success depends on our ability to retain, attract and motivate qualified personnel. We also seek to acquire talented engineering and technical personnel through acquisitions we may make from time to time or otherwise. We have historically encountered some difficulties in hiring and retaining qualified engineers, particularly in Silicon Valley and Southeast Asia where qualified engineers are in high demand. In addition, our employees, including employees whom we have retained as a result of an acquisition, may decide not to continue working for us and may leave with little or no notice. As the source of our technological and product innovations, our design and technical personnel represent a significant asset. Any inability to retain, attract or motivate such personnel could have a material adverse effect on our business, financial condition and results of operations.
Adverse global economic conditions could have a negative effect on our business, results of operations and financial condition and liquidity.
Adverse global economic conditions have from time to time caused or exacerbated significant slowdowns in the semiconductor industry generally, as well as in our target markets, which have adversely affected our business and results of operations. In recent periods, investor and customer concerns about the global economic outlook have adversely affected market and business conditions in general. Macroeconomic weakness and uncertainty also make it more difficult for us to accurately forecast revenue, gross margin and expenses. Sustained uncertainty about, or worsening of, current global economic conditions may cause our customers and consumers to reduce or delay spending, could lead to the insolvency of key suppliers and customers, and could intensify pricing pressures. Any or all of these factors could negatively affect demand for our products and our business, financial condition and result of operations.
We operate in the highly cyclical semiconductor industry, which is subject to significant downturns.
The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change and price erosion, evolving technical standards, frequent new product introductions, short product life cycles (for semiconductors and for many of the end products in which they are used) and wide fluctuations in product supply and demand. From time to time, these factors, together with changes in general economic conditions, cause significant upturns and downturns in the industry in general, and in our business in particular. Periods of industry downturns have been characterized by diminished demand for end-user products, high inventory levels and periods of inventory adjustment, under-utilization of manufacturing capacity, changes in revenue mix and accelerated erosion of average selling prices, resulting in an adverse effect on our business, financial condition and results of operations. We expect our business to continue to be subject to cyclical downturns even

16

Table of Contents

when overall economic conditions are relatively stable. If we cannot offset industry or market downturns, our net revenue may decline and our financial condition and results of operations may suffer.
Our proposed redomiciliation may adversely impact our overall cash tax costs. If we do not complete the redomiciliation within one year of the Brocade Merger, we may be required to divest our Brocade SAN business.
On November 2, 2017, we announced our intention to initiate a process to change the ultimate parent company of the Broadcom group from a Singapore company to a U.S. corporation. The final form and the timing of the redomiciliation has not yet been finalized and may be affected by the 2017 Tax Reform Act. In addition, the redomiciliation is subject to the approval of our shareholders. We presently expect our overall cash tax costs will approximately double, as compared to our fiscal year 2017 results, due to the redomiciliation and taking in account the expected effects of the 2017 Tax Reform Act.
Furthermore, in connection with the completion of the Brocade Merger, we agreed to initiate a process to separate and divest the Brocade SAN business if we do not complete this redomiciliation within one year after the Brocade Merger. Any such divestiture could materially and adversely affect our business and results of operations.
Winning business is subject to lengthy, competitive bid selection processes that often require us to incur significant expense, from which we may ultimately generate no revenue.
Our business is dependent on us winning competitive bid selection processes, known as “design wins”. These selection processes are typically lengthy and can require us to dedicate significant development expenditures and scarce engineering resources in pursuit of a single customer opportunity. Failure to obtain a particular design win may prevent us from obtaining design wins in subsequent generations of a particular product. This can result in lost revenue and could weaken our position in future competitive bid selection processes.
Winning a product design does not guarantee sales to a customer or that we will realize as much revenue as anticipated, if any. A delay or cancellation of a customer’s plans could materially and adversely affect our financial results, as we incur significant expense in the design process and may generate little or no revenue from it. In addition, the timing of design wins is unpredictable and implementing production for a major design win, or multiple design wins occurring at the same time, may strain our resources and those of our contract manufacturers. In such event, we may be forced to dedicate significant additional resources and incur additional, unanticipated costs and expenses. Often customers will only purchase limited numbers of evaluation units from us until they qualify the products and/or the manufacturing line for those products. The qualification process can take significant time and resources and we may not always be able to satisfy customers’ qualification requirements. Delays in qualification or failure to qualify our products may cause a customer to discontinue use of our products and result in a significant loss of revenue. Finally, customers could choose at any time to stop using our products or may fail to successfully market and sell their products, which could reduce demand for our products, and cause us to hold excess inventory, materially adversely affecting our business, financial condition and results of operations. These risks are exacerbated by the fact that many of our products, and the end products into which our products are incorporated, often have very short life cycles.
Competition in our industry could prevent us from growing our revenue.
The global semiconductor market is highly competitive. We expect competition in the markets in which we participate to continue to increase as existing competitors improve or expand their product offerings. Competition may further increase as companies not currently in direct competition with us may introduce competing products in the future. In addition, the competitive landscape is changing as a result of a trend toward consolidation within the industry, as some of our direct competitors have merged with or been acquired by other competitors while others have begun collaborating with each other. We expect this consolidation trend to continue.
Some of our competitors may have greater resources for manufacturing, distribution, financial, research and development or marketing resources than us. In addition, some of our competitors may also have a greater presence in key markets, a larger customer base or more comprehensive IP portfolio and patent protection than us. We compete with IDMs and fabless semiconductor companies, as well as the internal resources of large, integrated OEMs. Because our products are often building block semiconductors, providing functions that in some cases can be integrated into more complex ICs we also face competition from manufacturers of ICs, as well as customers that may develop their own IC products. Our competitors in these markets range from large, international companies offering a wide range of semiconductor products and devices to smaller companies specializing in niche markets and new technologies.
If we are unable to compete successfully, we may lose market share for our products or incur significant reduction in our gross margins, any of which could have a material adverse effect on our business and results of operations.

17

Table of Contents

A prolonged disruption of our manufacturing facilities, research and development facilities or other significant operations, or those of our suppliers, could have a material adverse effect on our business, financial condition and results of operations.
Although we operate a primarily outsourced manufacturing business model, we also rely on our own manufacturing facilities, in particular in Fort Collins, Colorado, Singapore, and Breinigsville, Pennsylvania. We use these internal fabrication facilities for products utilizing our innovative and proprietary processes, to protect our IP, to accelerate time to market of our products and to ensure supply of certain components. Our Fort Collins and Breinigsville facilities are the sole sources for our FBAR components used in many of our wireless devices and for the InP-based wafers used in our fibre optics products, respectively. Many of our facilities, and those of our contract manufacturers and suppliers, are located in California and the Pacific Rim region, which has above average seismic activity and severe weather activity. In addition, our research and development personnel are primarily concentrated in China, India, Israel, Malaysia, Singapore, South Korea, Taiwan, Fort Collins, Colorado, San Jose, California, Southern California and Breinigsville and Allentown, Pennsylvania, with the expertise of the personnel at each such location tending to be focused on one or two specific areas.
A prolonged disruption at one or more of our manufacturing or research facilities for any reason, especially our Fort Collins, Singapore and Breinigsville facilities, or those of our contract manufacturers or suppliers, due to natural- or man-made disasters or other events outside of our control, such as equipment malfunction or widespread outbreaks of acute illness at one or more of these facilities, would limit our capacity to meet customer demands and delay new product development until a replacement facility and equipment, if necessary, were found. Any such event would likely disrupt our operations, delay production, shipments and revenue, result in us being unable to timely satisfy customer demand, expose us to claims by our customers resulting in significant expense to repair or replace our affected facilities, and in some instances could significantly curtail our research and development efforts in a particular product area or target market. As a result, we could forgo revenue opportunities, potentially lose market share, damage our customer relationships and be subject to litigation and additional liabilities, all of which could materially and adversely affect our business. Although we purchase insurance to mitigate certain losses, such insurance often carries a high deductible amount and any such uninsured losses could negatively affect our operating results. In addition, even if we were able to promptly resume production of our affected products, if our customers cannot timely resume their own manufacturing following such an event, they may cancel or scale back their orders from us and this may in turn adversely affect our results of operations. Such events could also result in increased fixed costs relative to the revenue we generate and adversely affect our results of operations.
We may be unable to maintain appropriate manufacturing capacity at our own manufacturing facilities, which could adversely affect our relationships with our customers, and our business, financial condition and results of operations.
We must maintain appropriate capacity at our own manufacturing facilities to meet anticipated customer demand for our proprietary products. From time to time, this requires us to invest in expansion or improvements of those facilities, which often involves substantial cost and other risks, such as delays in completion. Such expanded manufacturing capacity may still be insufficient, or may not come online soon enough, to meet customer demand and we may have to put customers on product allocation, forgo sales or lose customers as a result. Conversely, if we overestimate customer demand, we would experience excess capacity and fixed costs at these facilities, all of which could adversely affect our results of operations.
Any failure of our IT systems or one or more of our corporate infrastructure vendors to provide necessary services could have a material adverse effect on our business.
We depend on various IT systems, including networks, applications, internal IT systems and personnel, and outsourced services for, among other things, financial reporting and product orders and shipments. We rely on third-party vendors to provide critical corporate infrastructure services, including certain services related to accounting, billing, shipping, human resources, benefit plan administration, IT network development and network monitoring. While we may be entitled to damages if our vendors fail to perform under their agreements with us, we may be unable to collect on any award of damages and any award may be insufficient to cover the actual costs we may incur as a result of a vendor’s failure to perform under its agreement with us. Upon expiration or termination of any of our third-party vendor agreements we may not be able to timely replace the vendor on terms and conditions, including service levels and cost, that are favorable to us. In addition, a transition from one vendor to another vendor could subject us to operational delays and inefficiencies until the transition is complete.
Any failure of these internal or third-party systems and services to operate effectively could disrupt our operations and could have a material adverse effect on our business, financial condition and results of operations by harming our ability to accurately forecast sales demand, manage our supply chain and production facilities, fulfill customer orders, and report financial and other information on a timely and accurate basis.
Our gross margin is dependent on a number of factors, including our product mix, price erosion, acquisitions we may make, level of capacity utilization and commodity prices.
Our gross margin is highly dependent on product mix, which is susceptible to seasonal and other fluctuations in our markets. A shift in sales mix away from our higher margin products, as well as the timing and amount of our non-product and

18

Table of Contents

IP-related revenue, could adversely affect our future gross margin percentages. Although our non-product revenue is generally high margin, it fluctuates significantly from quarter to quarter. In addition, increased competition and the existence of product alternatives, more complex engineering requirements, lower demand or reductions in our technological lead, compared to our competitors, and other factors may lead to further price erosion, lower revenue and lower margin for us in the future.
Our gross margin may also be adversely affected by expenses related to the acquisitions of businesses, such as amortization of intangible assets and restructuring and impairment charges. Furthermore, businesses or companies that we acquire may have different gross margin profiles than us and could, therefore, also affect our overall gross margin.
In addition, semiconductor manufacturing requires significant capital investment, leading to high fixed costs, including depreciation expense. If we are unable to utilize our owned manufacturing facilities at a high level, the fixed costs associated with these facilities, such as depreciation expense, will not be fully absorbed, resulting in higher average unit costs and a lower gross margin. Furthermore, fluctuations in commodity prices, either directly in the price of the raw materials we buy, or as a result of price increases passed on to us by our suppliers, could negatively impact our margins. We do not hedge our exposure to commodity prices, some of which (including gold and fuel prices) are very volatile, and sudden or prolonged increases in commodities prices may adversely affect our gross margin.
The enactment of legislation implementing changes in taxation of international business activities, the adoption of other corporate tax reform policies, or changes in tax legislation or policies could materially impact our financial position and results of operations.
Corporate tax reform, base-erosion efforts and tax transparency continue to be high priorities in many tax jurisdictions where we have business operations. As a result, policies regarding corporate income and other taxes in numerous jurisdictions are under heightened scrutiny and tax reform legislation is being proposed or enacted in a number of jurisdictions. For example, the 2017 Tax Reform Act, adopting broad U.S. corporate income tax reform will, among other things, reduce the U.S. corporate income tax rate, but will impose base-erosion prevention measures on non-U.S. earnings of U.S. entities as well as a one-time mandatory deemed repatriation tax on accumulated non-U.S. earnings of U.S. entities. The 2017 Tax Reform Act will affect the tax position reflected on our consolidated balance sheet and our obligations for cash taxes of our U.S. entities and will have a corresponding impact on our consolidated financial results starting in the first quarter of our fiscal year 2018.
In addition, many countries are beginning to implement legislation and other guidance to align their international tax rules with the Organisation for Economic Co-operation’s Base Erosion and Profit Shifting recommendations and action plan that aim to standardize and modernize global corporate tax policy, including changes to cross-border tax, transfer-pricing documentation rules, and nexus-based tax incentive practices. As a result of the heightened scrutiny of corporate taxation policies, prior decisions by tax authorities regarding treatments and positions of corporate income taxes could be subject to enforcement activities, and legislative investigation and inquiry, which could also result in changes in tax policies or prior tax rulings. Any such changes in policies or rulings may also result in the taxes we previously paid being subject to change.
Due to the large scale of our international business activities any substantial changes in international corporate tax policies, enforcement activities or legislative initiatives may materially and adversely affect our business, the amount of taxes we are required to pay and our financial condition and results of operations generally.
If the tax incentive or tax holiday arrangements we have negotiated in Singapore and other jurisdictions change or cease to be in effect or applicable, in part or in whole, for any reason, or if our assumptions and interpretations regarding tax laws and incentive or holiday arrangements prove to be incorrect, the amount of corporate income taxes we have to pay could significantly increase.
Our operations are currently structured to benefit from the various tax incentives and tax holidays extended to us in various jurisdictions to encourage investment or employment. For example, we have obtained tax incentives from the Singapore Economic Development Board, an agency of the Government of Singapore, which provide that qualifying income we earn in Singapore is subject to tax holiday or reduced rates of Singapore income tax. Subject to our compliance with the conditions specified in these incentives and legislative developments, the Singapore tax incentives are presently expected to expire at various dates generally between 2020 and 2021, subject in certain cases to potential extensions, which we may or may not be able to obtain, and any subsequent changes in incentive scope. Absent these tax incentives, the corporate income tax rate that would otherwise apply to our Singapore taxable income would be 17%. We also have tax holidays on our qualifying income in Malaysia, which are scheduled to expire between 2018 and 2028. The tax incentives and tax holidays that we have obtained are also subject to our compliance with various operating and other conditions and may, in some instances, be amended or terminated prior to their scheduled termination date by the relevant governmental authority. If we cannot, or elect not to, comply with the operating conditions included in any particular tax incentive, we could, in some instances, be required to refund previously realized material tax benefits, or if such tax incentive or tax holiday is terminated prior to its expiration absent a new incentive applying, we will lose the related tax benefits earlier than scheduled. Depending on the incentive at issue, we could also be required to modify our operational structure and tax strategy, which may not be as

19

Table of Contents

beneficial to us as the benefits provided under the present arrangements. The effect of all these tax incentives and tax holidays, in the aggregate, was to reduce the overall provision for income taxes by approximately $237 million, $169 million and $207 million, for fiscal years 2017, 2016 and 2015, respectively, to increase diluted net income per share by $0.56 and $0.74 in fiscal years 2017 and 2015, respectively, and to reduce diluted net loss per share by $0.44 for fiscal year 2016.
Our interpretations and conclusions regarding the tax incentives are not binding on any taxing authority, and if our assumptions about tax and other laws are incorrect or if these tax incentives are substantially modified or rescinded we could suffer material adverse tax and other financial consequences, which would increase our expenses, reduce our profitability and adversely affect our cash flows.
Our overall cash tax costs are affected by a number of factors, including reorganizations or restructurings of our businesses or assets, jurisdictional revenue mix and changes in tax regulations or policy, and may be further impacted if our ultimate parent company redomiciles from Singapore to the U.S., all of which could materially, adversely affect financial results.
We are currently a Singapore-based multinational company subject to tax in various tax jurisdictions. Significant judgment is required in determining our worldwide provision for income taxes. In the ordinary course of our business, there are many transactions where the ultimate tax determination is uncertain. Additionally, our calculations of income taxes payable currently and on a deferred basis are based on our interpretations of applicable tax laws in the jurisdictions in which we are required to file tax returns.
Our provision for income taxes is subject to volatility and could be adversely affected by numerous factors including:
reorganization or restructuring of our businesses, tangible and intangible assets, outstanding indebtedness and corporate structure, including the planned redomiciliation of our ultimate parent company from Singapore to the U.S.;
jurisdictional mix of our income and assets, and the resulting tax effects of differing tax rates in different countries;
changes in the allocation of income and expenses, including adjustments related to changes in our corporate structure, acquisitions or tax law;
changes in transfer pricing rules or methods of applying these rules;
changes in tax laws, including in the U.S., changes to the taxation of earnings of foreign subsidiaries, the deductibility of expenses attributable to income and foreign tax credit rules;
tax effects of increases in non-deductible employee compensation;
changes in tax accounting rules or principles and in the valuation of deferred tax assets and liabilities;
outcomes of income tax audits; and
modifications, expiration, lapses or termination of tax credits or incentives.
At the time we completed our acquisition of BRCM, or the Broadcom Merger, in connection with the preliminary allocation of the purchase price, we established a deferred tax liability on our balance sheet. This liability is associated with our potential tax liability arising from our planned integration of BRCM’s IP, which was completed in November 2016. This deferred tax liability was established using an assumed effective U.S. corporate income tax rate of 35%. However, the 2017 Tax Reform Act lowers this rate to 21%, which will result in a material reduction in the amount of other long-term liabilities on our balance sheet. In addition, prior to the adoption of the 2017 Tax Reform Act, this tax liability would have become payable in the U.S. as earnings resulting from this integration of IP were distributed over time. However, under the 2017 Tax Reform Act, we will be required to recognize all of these earnings in our fiscal year 2018 as a deemed repatriation of foreign earnings, subject to a one-time mandatory deemed repatriation tax. This repatriation tax, which we preliminarily estimate to be approximately $1.3 billion to $2.5 billion in the aggregate, will be payable over eight years starting in fiscal year 2018. This repatriation tax will increase the amount of our cash taxes payable by an initial amount of at least $100 million to $200 million per year, starting in fiscal year 2018. Our initial estimates of the financial impact of the 2017 Tax Reform Act may change as we refine our analysis and as additional guidance becomes available.
We have also adopted transfer pricing policies between our affiliated entities. Our policies call for the provision of services, the sale of products, the advance of financing and grant of licenses from one affiliate to another at prices that we believe are negotiated on an arm’s length basis. Our taxable income in any jurisdiction is dependent upon acceptance of our operational practices and intercompany transfer pricing by local tax authorities as being on an arm’s length basis. Due to inconsistencies in application of the arm’s length standard among taxing authorities, as well as lack of adequate treaty-based protection, transfer pricing challenges by tax authorities could, if successful, result in adjustments for prior or future years. As a result of these adjustments, we could become subject to higher taxes and our earnings and results of operations would be adversely affected in any period in which such determination is made.

20

Table of Contents

Although we believe our tax estimates are reasonable, there is no assurance that the final determination of our income tax liability will not be materially different than what is reflected in our income tax provisions and accruals. Significant judgment is required to determine the recognition and measurement of tax liabilities prescribed in the relevant accounting guidance for uncertainty in income taxes. The accounting guidance for uncertainty in income taxes applies to all income tax positions, which, if resolved unfavorably, could adversely impact our provision for income taxes and our payment obligation with respect to any such taxes.
In addition, we are subject to, and are under, tax audit in various jurisdictions, and such jurisdictions may assess additional income tax against us. Although we believe our tax positions are reasonable, the final determination of tax audits could be materially different from our income tax provisions and accruals. The ultimate result of an audit could have a material adverse effect on our results of operations and cash flows in the period or periods for which that determination is made.
We may be involved in legal proceedings, including IP, anti-competition and securities litigation, employee-related claims and governmental investigations, which could, among other things, divert efforts of management and result in significant expense and loss of our IP rights.
We are often involved in legal proceedings, including cases involving our IP rights and those of others, anti-competition and commercial matters, merger-related suits, securities class action suits, employee-related claims and other actions. Some of these actions may seek injunctive relief, including injunctions or exclusion orders against the sale of our products and substantial monetary damages, which if granted or awarded could materially harm our business, financial condition and results of operations. From time to time, we may also be involved or required to participate in governmental investigations. Litigation or settlement of such actions, regardless of their merit, or involvement in governmental investigations, can be complex, can extend for a protracted period of time, may divert the efforts and attention of our management and technical personnel, is frequently costly and the related expenditures unpredictable. An unfavorable resolution of a governmental investigation may include, among others, fines or other orders to pay money, and/or the issuance of orders to cease certain conduct and/or modify our business practices.
The semiconductor industry is characterized by companies holding large numbers of patents, copyrights, trademarks and trade secrets and by the vigorous pursuit, protection and enforcement of IP rights, including actions by patent-holding companies that do not make or sell products. From time to time, third parties assert against us and our customers and distributors their patent, copyright, trademark, trade secret and other IP rights to technologies that are important to our business.
Many of our customer agreements, and in some cases our asset sale agreements, require us to indemnify our customers or purchasers for third-party IP infringement claims, including costs to defend those claims, and payment of damages in the case of adverse rulings. Claims of this sort could also harm our relationships with our customers and might deter future customers from doing business with us. We do not know whether we will prevail in such proceedings, given the complex technical issues and inherent uncertainties in IP litigation. If any pending or future proceedings result in an adverse outcome, we could be required to:
cease the manufacture, use or sale of the infringing products, processes or technology and/or make changes to our processes or products;
pay substantial damages for past, present and future use of the infringing technology;
expend significant resources to develop non-infringing technology;
license technology from the third-party claiming infringement, which license may not be available on commercially reasonable terms, or at all;
enter into cross-licenses with our competitors, which could weaken our overall IP portfolio and our ability to compete in particular product categories;
indemnify our customers or distributors and/or recall, or accept the return of, infringing products;
pay substantial damages to our direct or end customers to discontinue use or replace infringing technology with non-infringing technology; or
relinquish IP rights associated with one or more of our patent claims, if such claims are held invalid or otherwise unenforceable.
Any of the foregoing results could have a material adverse effect on our business, financial condition and results of operations.
In addition, we may be obligated to indemnify our current or former directors or employees, or former directors or employees of companies that we have acquired, in connection with litigation or regulatory investigations. These liabilities

21

Table of Contents

could be substantial and may include, among other things, the cost of defending lawsuits against these individuals, as well as stockholder derivative suits; the cost of government, law enforcement or regulatory investigations; civil or criminal fines and penalties; legal and other expenses; and expenses associated with the remedial measure, if any, which may be imposed.
We utilize a significant amount of IP in our business. If we are unable or fail to protect our IP, our business could be adversely affected.
Our success depends in part upon protecting our IP. To accomplish this, we rely on a combination of IP rights, including patents, copyrights, trademarks and trade secrets, as well as customary contractual protections with our customers, suppliers, employees and consultants. We may be required to spend significant resources to monitor and protect our IP rights, and even with significant expenditures we may not be able to protect our IP rights that are valuable to our business. We are unable to predict or assure that:
IP rights that we presently employ in our business will not lapse or be invalidated, circumvented, challenged, or, in the case of third-party IP rights licensed to us, be licensed to others;
our IP rights will provide competitive advantages to us;
rights previously granted by third parties to IP rights licensed or assigned to us, including portfolio cross-licenses, will not hamper our ability to assert our IP rights against potential competitors or hinder the settlement of currently pending or future disputes;
any of our pending or future patent, trademark or copyright applications will be issued or have the coverage originally sought; 
our IP rights will be enforced in certain jurisdictions where competition may be intense or where legal protection may be weak; or
we have sufficient IP rights to protect our products or our business.
In addition, our competitors or others may develop products or technologies that are similar or superior to our products or technologies, duplicate our products or technologies or design around our protected technologies. Effective patent, trademark, copyright and trade secret protection may be unavailable or more limited in other jurisdictions, relative to those protections available in the United States, may not be applied for or may be abandoned in one or more relevant jurisdictions. We may elect to abandon or divest patents or otherwise not pursue prosecution of certain pending patent applications, due to strategic concerns or other factors. In addition, when patents expire, we lose the protection and competitive advantages they provided to us.
We also generate some of our revenue from licensing royalty payments and from technology claim settlements relating to certain of our IP. Licensing of our IP rights, particularly exclusive licenses, may limit our ability to assert those IP rights against third parties, including the licensee of those rights. In addition, we may acquire companies with IP that is subject to licensing obligations to other third parties. These licensing obligations may extend to our own IP following any such acquisition and may limit our ability to assert our IP rights. From time to time we pursue litigation to assert our IP rights, including, in some cases, against third parties with whom we have ongoing relationships, such as customers and suppliers. Claims of this sort could also harm our relationships with our customers and might deter future customers from doing business with us. Conversely, third parties may pursue IP litigation against us, including as a result of our IP licensing business. An adverse decision in such types of legal action could limit our ability to assert our IP rights and limit the value of our technology, including the loss of opportunities to sell or license our technology to others or to collect royalty payments based upon successful protection and assertion of our IP against others. In addition, such legal actions or adverse decisions could otherwise negatively impact our business, financial condition and results of operations.
From time to time we may need to obtain additional IP licenses or renew existing license agreements. We are unable to predict whether these license agreements can be obtained or renewed on acceptable terms or at all.
We are subject to warranty claims, product recalls and product liability.
From time to time, we may be subject to warranty or product liability claims that may in the future lead to significant expense. Our customer contracts typically contain warranty and indemnification provisions, and in certain cases may also contain liquidated damages provisions, relating to product quality issues. The potential liabilities associated with such provisions are significant, and in some cases, including in agreements with some of our largest customers, are potentially unlimited. Any such liabilities may greatly exceed any revenue we receive from the relevant products. Costs, payments or damages incurred or paid by us in connection with warranty and product liability claims and product recalls could materially and adversely affect our financial condition and results of operations. We may also be exposed to such claims as a result of any acquisition we may undertake in the future.

22

Table of Contents

Product liability insurance is subject to significant deductibles and there is no guarantee that such insurance will be available or adequate to protect against all such claims, or we may elect to self-insure with respect to certain matters. It is possible for one of our customers to recall a product containing one of our devices. In such an event, we may incur significant costs and expenses, including among others, replacement costs, contract damage claims from our customers and reputational harm. Although we maintain reserves for reasonably estimable liabilities and purchase product liability insurance, our reserves may be inadequate to cover the uninsured portion of such claims. Conversely, in some cases, amounts we reserve may ultimately exceed our actual liability for particular claims and may need to be reversed.
The complexity of our products could result in unforeseen delays or expense or undetected defects or bugs, which could adversely affect the market acceptance of new products, damage our reputation with current or prospective customers, and materially and adversely affect our operating costs.
Highly complex products, such as those we offer, may contain defects and bugs when they are first introduced or as new versions are released, or their release may be delayed due to unforeseen difficulties during product development. If any of our products, including products of companies we have acquired, or third-party components used in our products, contain defects or bugs, or have reliability, quality or compatibility problems, we may not be able to successfully design workarounds. Furthermore, if any of these problems are not found until after we have commenced commercial production of a new product, we may be required to incur additional development costs and product recall, repair or replacement costs. Consequently, our reputation may be damaged and customers may be reluctant to buy our products, which could materially and adversely affect our ability to retain existing customers and attract new customers. To resolve these problems, we may have to invest significant capital and other resources. These problems may also result in claims against us by our customers or others. For example, if a delay in the manufacture and delivery of our products causes the delay of a customer’s end-product delivery, we may be required, under the terms of our agreement with that customer, to compensate the customer for the adverse effects of such delays. In addition, these problems may divert our technical and other resources from other development efforts, and we would likely lose, or experience a delay in, market acceptance of the affected product or products. As a result, our financial results could be materially and adversely affected.
We make substantial investments in research and development to enhance existing and develop new technologies to keep pace with technological advances and to remain competitive in our business, and unsuccessful investments could materially adversely affect our business, financial condition and results of operations.
The semiconductor industry is characterized by rapid technological change, changes in customer requirements, frequent new product introductions and enhancements, short product cycles and evolving industry standards, and requires substantial investment in our research and development in order to develop and bring to market new and enhanced technologies and products. In addition, semiconductor products transition over time to increasingly smaller line width geometries. This requires us to adapt our products and manufacturing processes to these new technologies, which requires expertise in new procedures. Our failure to successfully transition to smaller geometry process technologies could impair our competitive position. In order to remain competitive, we have made, and expect to continue to make, significant investments in research and development. We expect the dollar amount of research and development expenses to increase for the foreseeable future, due to the increasing complexity and number of products we plan to develop. If we fail to develop new and enhanced products and technologies, if we focus on technologies that do not become widely adopted, or if new competitive technologies that we do not support, become widely accepted, demand for our products may be reduced. Significant investments in unsuccessful research and development efforts could materially adversely affect our business, financial condition and results of operations. In addition, increased investments in research and development could cause our cost structure to fall out of alignment with demand for our products, which would have a negative impact on our financial results.
Our business, financial condition and results of operations could be adversely affected by the political and economic conditions of the countries in which we conduct business and other factors related to our international operations.
A majority of our products are produced and sourced in Asia, including China, India, Malaysia, the Philippines, Singapore, South Korea, Taiwan and Thailand, and we sell our products throughout the world. In addition, as of October 29, 2017, approximately 38% of our employees are located in Asia. Multiple factors relating to our international operations and to particular countries in which we operate could have a material adverse effect on our business, financial condition and results of operations. These factors include:
changes in political, regulatory, legal or economic conditions or geopolitical turmoil, including terrorism, war or political or military coups, or civil disturbances or political instability;
restrictive governmental actions, such as restrictions on the transfer or repatriation of funds and foreign investments and trade protection measures, including import/export restrictions, import/export duties and quotas, and customs duties and tariffs, all of which could increase under the current administration in the United States;

23

Table of Contents

disruptions of capital and trading markets and currency fluctuations, which may result in our products becoming too expensive for foreign customers or foreign-sourced materials and services becoming more expensive for us;
difficulty in obtaining product distribution and support, and transportation delays;
difficulty in conducting due diligence with respect to business partners in certain international markets;
public health or safety concerns;
nationalization of businesses and expropriation of assets; and
changes in tax laws.
A significant legal risk associated with conducting business internationally is compliance with the various and differing laws and regulations, including anti-corruption and anti-bribery laws and regulations, of the countries in which we do business, antitrust and competition laws, data privacy laws and export regulations. In addition, the laws in various countries are constantly evolving and may, in some cases, conflict with each other. Although our Code of Ethics and Business Conduct and other policies prohibit us, our employees and our agents from engaging in unethical business practices, there can be no assurance that all of our employees or agents will refrain from acting in violation of our related anti-corruption policies and procedures. Any such violation could have a material adverse effect on our business.
Our business is subject to various governmental regulations, and compliance with these regulations may cause us to incur significant expense. If we fail to maintain compliance with applicable regulations, we may be forced to cease the manufacture and distribution of certain products, and we could be subject to civil or criminal penalties.
Our business is subject to various international laws and other legal requirements, including packaging, product content, labor and import/export regulations, such as the U.S. Export Administration Regulations, and many of our products are regulated or sold into regulated industries. These laws and regulations are complex, change frequently, have generally become more stringent over time and may intensify under the current U.S. administration. We may be required to incur significant expense to comply with, or to remedy violations of, these regulations. In addition, if our customers fail to comply with these regulations, we may be required to suspend sales to these customers, which could negatively impact our results of operations.
In addition, the manufacture and distribution of our semiconductors must comply with various laws and adapt to changes in regulatory requirements as they occur. For example, if a country in which our products are manufactured or sold sets technical standards that are not widely shared, it may require us to stop distributing our products commercially until they comply with such new standards, lead certain of our customers to suspend imports of their products into that country, require manufacturers in that country to manufacture products with different technical standards and disrupt cross-border manufacturing relationships, any of which could have a material adverse effect on our business, financial condition and results of operations. If we fail to comply with these requirements, we could also be required to pay civil penalties or face criminal prosecution. In addition, it is expected that the current U.S. administration’s trade policy will promote U.S. manufacturing and manufacturers. It is unclear what effect this will have on us as a multinational company that conducts business world-wide, or on our suppliers, customers, contract manufacturers and OEMs.
Our products and operations are also subject to the rules of industrial standards bodies, like the International Standards Organization, as well as regulation by other agencies, such as the U.S. Federal Communications Commission. If we fail to adequately address any of these rules or regulations, our business could be harmed.
We are subject to environmental, health and safety laws, which could increase our costs, restrict our operations and require expenditures that could have a material adverse effect on our results of operations and financial condition.
We are subject to a variety of international laws and regulations relating to the use, disposal, clean-up of and human exposure to, hazardous materials. Compliance with environmental, health and safety requirements could, among other things, require us to modify our manufacturing processes, restrict our ability to expand our facilities, or require us to acquire pollution control equipment, all of which can be very costly. Any failure by us to comply with such requirements could result in the limitation or suspension of the manufacture of our products, and could result in litigation against us and the payment of significant fines and damages by us in the event of a significant adverse judgment. In addition, complying with any cleanup or remediation obligations for which we are or become responsible could be costly and have a material adverse effect on our business, financial condition and results of operations.
Changing requirements relating to the materials composition of our products, including the restrictions on lead and certain other substances in electronics that apply to specified electronics products sold in various countries, including the United States, China, Japan, and in the European Union, increase the complexity and costs of our product design and procurement operations and may require us to re-engineer our products. Such re-engineering may result in excess inventory or other additional costs and could have a material adverse effect on our results of operations. We may also experience claims

24

Table of Contents

from employees from time to time with regard to exposure to hazardous materials or other workplace related environmental claims.
Social and environmental responsibility regulations, policies and provisions, as well as customer demand, may make our supply chain more complex and may adversely affect our relationships with customers.
There is an increasing focus on corporate social and environmental responsibility in the semiconductor industry, particularly with OEMs that manufacture consumer electronics. A number of our customers have adopted, or may adopt, procurement policies that include social and environmental responsibility provisions that their suppliers should comply with, or they seek to include such provisions in their procurement terms and conditions. An increasing number of participants in the semiconductor industry are also joining voluntary social responsibility initiatives such as the U.N. Global Compact, a voluntary initiative for businesses to develop, implement and disclose sustainability policies and practices. These social and environmental responsibility provisions and initiatives are subject to change, can be unpredictable, and may be difficult and expensive for us to comply with, given the complexity of our supply chain and our significant outsourced manufacturing. If we are unable to comply, or are unable to cause our suppliers or contract manufacturers to comply, with such policies or provisions, a customer may stop purchasing products from us, and may take legal action against us, which could harm our reputation, revenue and results of operations.
In addition, as part of their corporate social and environmental responsibility programs, an increasing number of OEMs are seeking to source products that do not contain minerals sourced from areas where proceeds from the sale of such minerals are likely to be used to fund armed conflicts, such as in the Democratic Republic of Congo. This could adversely affect the sourcing, availability and pricing of minerals used in the manufacture of semiconductor devices, including our products. Since our supply chain is complex, we are not currently able to definitively ascertain the origins of all of these minerals and metals used in our products. As a result, we may face difficulties in satisfying these customers’ demands, which may harm our sales and operating results.
The average selling prices of products in our markets have often decreased rapidly and may do so in the future, which could harm our revenue and gross profit.
The products we develop and sell are used for high volume applications. As a result, the prices of those products have often decreased rapidly. Gross profit on our products may be negatively affected by, among other things, pricing pressures from our customers. In the past, we have reduced the average selling prices of our products in anticipation of future competitive pricing pressures, new product introductions by us or our competitors and other factors. In addition, some of our customer agreements provide for volume-based pricing and product pricing roadmaps, which can also reduce the average selling prices of our products over time. Our margins and financial results will suffer if we are unable to offset any reductions in our average selling prices by increasing our sales volumes, reducing manufacturing costs, or developing new and higher value-added products on a timely basis.
A breach of our security systems may have a material adverse effect on our business.
Our security systems are designed to maintain the physical security of our facilities and protect our customers’, suppliers’ and employees’ confidential information, as well as our own proprietary information. However, we are also dependent on a number of third-party cloud-based and other service providers of critical corporate infrastructure services relating to, among other things, human resources, electronic communication services and certain finance functions, and we are, of necessity, dependent on the security systems of these providers. Accidental or willful security breaches or other unauthorized access by third parties or our employees or contractors of our facilities, our information systems or the systems of our cloud-based or other service providers, or the existence of computer viruses or malware in our or their data or software could expose us to a risk of information loss and misappropriation of proprietary and confidential information, including information relating to our products or customers and the personal information of our employees. In addition, we have, from time to time, also been subject to unauthorized network intrusions and malware on our own IT networks. Any theft or misuse of confidential, personal or proprietary information as a result of such activities could result in, among other things, unfavorable publicity, damage to our reputation, loss of our trade secrets and other competitive information, difficulty in marketing our products, allegations by our customers that we have not performed our contractual obligations, litigation by affected parties and possible financial obligations for liabilities and damages related to the theft or misuse of such information, as well as fines and other sanctions resulting from any related breaches of data privacy regulations, any of which could have a material adverse effect on our reputation, business, profitability and financial condition. Since the techniques used to obtain unauthorized access or to sabotage systems change frequently and are often not recognized until launched against a target, we may be unable to anticipate these techniques or to implement adequate preventative measures.

25

Table of Contents

We are required to assess our internal control over financial reporting on an annual basis and any adverse findings from such assessment could result in a loss of investor confidence in our financial reports, significant expense to remediate any internal control deficiencies and ultimately have an adverse effect on our share price.
We are required to assess the effectiveness of our internal control over financial reporting annually, as required by Section 404 of the Sarbanes-Oxley Act. Even though, as of October 29, 2017, we concluded that our internal control over financial reporting was effective, we need to maintain our processes and systems and adapt them as our business grows and changes, including to reflect our integration of Brocade, as well as any future acquisitions we may undertake. This continuous process of maintaining and adapting our internal controls and complying with Section 404 is expensive, time consuming and requires significant management attention. We cannot be certain that our internal control measures will continue to provide adequate control over our financial processes and reporting and ensure compliance with Section 404. Furthermore, as we grow our business or acquire other businesses, our internal controls may become more complex and we may require significantly more resources to ensure they remain effective. Failure to implement required new or improved controls, or difficulties encountered in the implementation of such controls, either in our existing business or in businesses that we acquire, could harm our operating results or cause us to fail to meet our reporting obligations. If we or our independent registered public accounting firm identify material weaknesses in our internal controls, the disclosure of that fact, even if quickly remedied, may cause investors to lose confidence in our financial statements and the trading price of our ordinary shares may decline.
Remediation of a material weakness could require us to incur significant expenses and if we fail to remedy any material weakness, our financial statements may be inaccurate, we may be required to restate our financial statements, our ability to report our financial results on a timely and accurate basis may be adversely affected, our access to the capital markets may be restricted, the trading price of our ordinary shares may decline, and we may be subject to sanctions or investigation by regulatory authorities, including the SEC or The Nasdaq Global Select Market.
Our financial condition and results of operations could be adversely affected by employee-benefit related costs and expense.
We sponsor several defined benefit plans and post-retirement medical benefit plans. We are required to make contributions to these plans to comply with minimum funding requirements imposed by laws governing these employee benefit plans. The difference between the obligations and assets of these plans, or the funded status of these plans, is a significant factor in determining our pension expense and the ongoing funding requirements of these plans. The projected benefit obligations under these pension plans exceeded the value of the assets of those plans by approximately $82 million at the end of fiscal year 2017. We expect to have additional funding requirements in future years and we may make additional, voluntary contributions to the plans. Depending on our cash position at the time, any such funding or contributions to our pension plans could impact our operating flexibility and financial position, including adversely affecting our cash flow for the quarter in which they are made.
Furthermore, in order to reduce the expenses associated with these programs, where practicable, we are seeking to move defined benefit plans to defined contribution plans, or to cash out future retirees not yet receiving benefits, and to replace existing pension obligations with annuities. Any such changes may adversely affect our results of operations, including our profitability and cash flows. Weak economic conditions and related under-performance of asset markets could also lead to an increase in post-retirement benefit expense.
The Internal Revenue Service may not agree that Broadcom Limited should be treated as a foreign corporation for U.S. federal income tax purposes.
A corporation is generally considered a tax resident in the jurisdiction of its organization or incorporation for U.S. federal income tax purposes. Because Broadcom is currently a Singapore entity, it would generally be classified as a foreign corporation (and, therefore, not a U.S. tax resident) under these rules. Even so, the Internal Revenue Service, or IRS, may assert that we should be treated as a U.S. corporation (and, therefore, a U.S. tax resident) for U.S. federal income tax purposes pursuant to Section 7874 of the Internal Revenue Code of 1986, as amended, or the Code.
Under Section 7874 of the Code, if the former shareholders of BRCM hold 80% or more of the vote or value of the ordinary shares of Broadcom, by reason of their former holding of BRCM common shares (the percentage (by vote and value) of our ordinary shares considered to be held (for purposes of Section 7874 of the Code) by former BRCM shareholders immediately after the Broadcom Merger by reason of holding BRCM common shares is referred to in this disclosure as the “Section 7874 Percentage”), and our expanded affiliated group after the Broadcom Transaction does not have substantial business activities in Singapore relative to our worldwide business activities, Broadcom would be treated as a U.S. corporation for U.S. federal income tax purposes. If the Section 7874 Percentage were determined to be at least 60% (but less than 80%), Section 7874 of the Code would cause Broadcom to be treated as a “surrogate foreign corporation” if we did not have substantial business activities in Singapore relative to our worldwide business activities.

26

Table of Contents

Under current law, Broadcom should not be treated as a U.S. corporation for U.S. federal income tax purposes. However, determining the Section 7874 Percentage is complex and is subject to factual and legal uncertainties, including that such determination takes into account several factors other than the ratio of ownership of our ordinary shares by former BRCM shareholders following the Broadcom Merger. While we believe the Section 7874 Percentage to be significantly less than 60% (and therefore that Section 7874 should not apply to Broadcom or BRCM), there can be no assurance that the IRS will agree with the position that the Section 7874 Percentage is less than 60%.
If the Section 7874 Percentage were determined to be at least 60% (but less than 80%), several limitations could apply to BRCM. For example, BRCM would be prohibited from using its net operating losses, foreign tax credits or other tax attributes to offset the income or gain recognized by reason of the transfer of property to a foreign related person during the 10-year period following the Broadcom Merger or any income received or accrued during such period by reason of a license of any property by BRCM to a foreign related person. In addition, the IRS has announced that it will promulgate new rules, which, in that situation, may limit the ability to restructure the non-U.S. members of the BRCM tax group or access cash earned in its non-U.S. subsidiaries. Moreover, in such case, Section 4985 of the Code and rules related thereto would impose an excise tax on the value of certain stock compensation held directly or indirectly by certain BRCM “disqualified individuals” (including former officers and directors of BRCM) at a rate equal to 15%, but only if a gain is otherwise recognized by BRCM shareholders as a result of the Broadcom Merger.
Risks Relating to Our Indebtedness
Our substantial indebtedness could adversely affect our financial health and our ability to raise additional capital to fund our operations, limit our ability to react to changes in the economy or our industry and prevent us from fulfilling our obligations under our indebtedness.
As of October 29, 2017, our total consolidated indebtedness under our senior unsecured notes that were issued and sold in January 2017, or the January 2017 Senior Notes, and our senior unsecured notes that were issued and sold in October 2017, or the October 2017 Senior Note, collectively the Senior Notes, was $17,689 million. Subject to restrictions in the indentures governing our Senior Notes, or the Indentures, we have the ability to incur a significant amount of additional indebtedness in the future.
Our substantial indebtedness could have important consequences including:
increasing our vulnerability to adverse general economic and industry conditions;
requiring us to dedicate a substantial portion of our cash flow from operations to payments on our indebtedness, thereby reducing the availability of our cash flow to fund working capital, capital expenditures, research and development efforts, execution of our business strategy, acquisitions and other general corporate purposes;
limiting our flexibility in planning for, or reacting to, changes in the economy and the semiconductor industry;
placing us at a competitive disadvantage compared to our competitors with less indebtedness; and
making it more difficult to borrow additional funds in the future to fund growth, acquisitions, working capital, capital expenditures and other purposes; and
exposing us to interest rate risk to the extent we incur any variable rate indebtedness, and we do not typically hedge against changes in interest rates.
The Indentures also place limitations on our ability to incur certain secured debt, enter into certain sale and lease-back transactions and consolidate, merge, sell or otherwise dispose of all or substantially all of our assets. In addition, the Indentures contain customary events of default upon the occurrence of which, after any applicable grace period, the noteholders would have the ability to immediately declare the debt due and payable. In such event, we may not have sufficient available cash to repay such debt at the time it becomes due, or be able to refinance such debt on acceptable terms or at all. Any of the foregoing could materially and adversely affect our business, financial condition and results of operations.
We receive debt ratings from the major credit rating agencies in the United States. Credit rating agencies regularly revise their ratings for companies they follow, including us. Factors that may impact our credit ratings include debt levels, planned asset purchases or sales and near-term and long-term production growth opportunities. Liquidity, asset quality, cost structure, reserve mix and commodity pricing levels could also be considered by the rating agencies. A ratings downgrade could adversely affect the trading price of our Senior Notes or the trading market for our Senior Notes. Any credit rating downgrade could adversely impact our ability to access debt markets in the future or to refinance our outstanding indebtedness at similar rates or at all, increase the cost of current or future debt and significantly harm our financial condition and results of operations.

27

Table of Contents

Servicing our debt requires a significant amount of cash, and we may not have sufficient cash flow from our business to pay our substantial debt.
Our ability to make scheduled payments of the principal of, to pay interest on, and to refinance our debt, depends on our future performance, which is subject to economic, financial, competitive and other factors beyond our control. Our business may not continue to generate cash flow from operations in the future sufficient to satisfy our obligations under the Senior Notes and any future indebtedness we may incur and to make necessary capital expenditures. If we are unable to generate such cash flow, we may be required to adopt one or more alternatives, such as reducing or delaying investments or capital expenditures, selling assets, refinancing or obtaining additional equity capital on terms that may be onerous or highly dilutive. Our ability to refinance our outstanding indebtedness or future indebtedness will depend on the capital markets and our financial condition at such time. We may not be able to engage in any of these activities or engage in these activities on desirable terms when needed, which could result in a default on our indebtedness.
The trading prices of the Senior Notes may be volatile.
The trading prices of the Senior Notes could be subject to significant fluctuation in response to, among other factors, changes in our operating results, interest rates, the market for debt securities, general economic conditions and securities analysts’ recommendations, if any, regarding our securities.
Risks Relating to Investments in Singapore Companies
It may be difficult to enforce a judgment of U.S. courts for civil liabilities under U.S. federal securities laws against us or our directors in Singapore.
Broadcom is incorporated under the laws of the Republic of Singapore, and certain of our directors are resident outside the United States. Moreover, a majority of our consolidated assets are located outside the United States. Although Broadcom is incorporated outside the United States, we have agreed to accept service of process in the United States through our agent designated for certain purposes. Nevertheless, since a majority of the consolidated assets owned by us are located outside the United States, any judgment obtained in the United States against us may not be collectible within the United States.
There is no ratified treaty between the United States and Singapore providing for the reciprocal recognition and enforcement of judgments in civil and commercial matters. A final judgment for the payment of money rendered by any federal or state court in the United States based on civil liability, whether or not predicated solely upon the federal securities laws, would, therefore, not be automatically enforceable in Singapore. There is doubt whether a Singapore court may impose civil liability on Broadcom or our directors and officers who reside in Singapore in a suit brought in the Singapore courts against us or such persons with respect to a violation solely of the federal securities laws of the United States. Consequently, there can be no assurance as to whether Singapore courts will enter judgments in actions brought in Singapore courts based upon the civil liability provisions of the federal securities laws of the United States.
Broadcom is incorporated in Singapore and our shareholders may have more difficulty in protecting their interest than they would as shareholders of a corporation incorporated in the United States, and we may have more difficulty attracting and retaining qualified board members and executives.
Broadcom’s corporate affairs are governed by its Constitution and by the laws governing corporations incorporated in Singapore. The rights of our shareholders and the responsibilities of the members of our Board under Singapore law are different from those applicable to a corporation incorporated in the United States. Therefore, our public shareholders may have more difficulty in protecting their interest in connection with actions taken by our management or members of our Board than they would as shareholders of a corporation incorporated in the United States.
In addition, being a public company incorporated in Singapore may make it more expensive for Broadcom to obtain director and officer liability insurance, and we may be required to accept reduced coverage or incur substantially higher costs to obtain coverage. These factors could also make it more difficult for us to attract and retain qualified executive officers and members of our Board, particularly to serve on committees of our Board.
For a limited period of time, our directors have general authority to allot and issue new ordinary shares on such terms and conditions as may be determined by our Board in its sole discretion.
Under Singapore law, we may only allot and issue new ordinary shares with the prior approval of Broadcom’s shareholders in a general meeting. At our 2017 annual general meeting, Broadcom’s shareholders provided our directors with the general authority to allot and issue any number of new ordinary shares, which will continue in force until the earlier of (i) the conclusion of our annual general meeting in 2018, (ii) the expiration of the period within which the next annual general meeting is required by law to be held (i.e., within 15 months after the conclusion of the last general meeting) or (iii) the subsequent revocation or modification of such general authority by our shareholders at a duly convened general meeting. Subject to the general authority to allot and issue new ordinary shares provided by our shareholders, the provisions of the

28

Table of Contents

Singapore Companies Act and Broadcom’s Constitution, our Board may allot and issue new ordinary shares on such terms and conditions as they may think fit to impose. Any additional issuances of new ordinary shares by our directors may adversely impact the market price of our ordinary shares and dilute your share ownership.
Risks Relating to Owning Our Ordinary Shares
At times, Broadcom’s share price has been volatile and it may fluctuate substantially in the future, which could result in substantial losses for our investors as well as class action litigation against us and our management which could cause us to incur substantial costs and divert our management’s attention and resources.
The trading price of Broadcom ordinary shares has, at times, fluctuated significantly and could be subject to wide fluctuations in response to any of the risk factors listed in this “Risk Factors” section, and others, including:
actual or anticipated fluctuations in our financial condition and operating results;
issuance of new or updated research or reports by securities analysts;
fluctuations in the valuation and results of operations of our significant customers as well as companies perceived by investors to be comparable to us;
announcements of proposed acquisitions by us or our competitors;
announcements of, or expectations of additional debt or equity financing efforts;
share price and volume fluctuations attributable to inconsistent trading volume levels of our shares; 
issuance of ordinary shares upon exchange of Partnership REUs; and
changes in our dividend or share repurchase policies.
These fluctuations are often unrelated or disproportionate to our operating performance. These broad market and industry fluctuations, as well as general economic, political and market conditions such as recessions, interest rate changes or currency fluctuations, may negatively impact the market price of our ordinary shares. You may not realize any return on your investment in us and may lose some or all of your investment. In the past, companies that have experienced volatility in the market price of their stock have been subject to securities class action litigation. We may be the target of this type of litigation in the future. We are also the subject of a number of lawsuits stemming from our acquisitions of PLX Technology, Inc., or PLX, Emulex and Brocade. Securities litigation against us, including the lawsuits related to such transactions, could result in substantial costs and divert our management’s attention from other business concerns, which could seriously harm our business.
A substantial amount of our shares is held by a small number of large investors and significant sales of our ordinary shares in the public market by one or more of these holders could cause our share price to fall.
As of September 30, 2017, we believe that our two largest shareholders, Capital World Investors and Capital Research Global Investors, held approximately 17% of Broadcom outstanding ordinary shares in the aggregate. These investors may sell their shares at any time for a variety of reasons and such sales could depress the market price of our ordinary shares. In addition, any such sales of our ordinary shares by these entities could also impair our ability to raise capital through the sale of additional equity securities.
There can be no assurance that we will continue to declare cash dividends.
Our Board has adopted a dividend policy pursuant to which we currently pay a cash dividend on Broadcom ordinary shares on a quarterly basis. The declaration and payment of any dividend is subject to the approval of our Board and our dividend may be discontinued or reduced at any time. There can be no assurance that we will declare cash dividends in the future in any particular amounts, or at all. Furthermore, we may declare dividends as interim dividends, which are wholly provisional under Singapore law and may be revoked by our Board at any time prior to the payment thereof.
Future dividends, if any, and their timing and amount, may be affected by, among other factors: management’s views on potential future capital requirements for strategic transactions, including acquisitions; earnings levels; contractual restrictions; cash position and overall financial condition; and changes to our business model. The payment of cash dividends is restricted by applicable law, contractual restrictions and our corporate structure. Pursuant to Singapore law and Broadcom’s Constitution, no dividends may be paid except out of our profits or expected profits, based on Singapore accounting standards. Because we are a holding company, our ability to pay cash dividends on Broadcom ordinary shares is also limited by restrictions on our ability to obtain sufficient funds through dividends from subsidiaries.

29

Table of Contents

Singapore corporate law may impede a takeover of our company by a third-party, which could adversely affect the value of our ordinary shares.
The Singapore Code on Take-overs and Mergers contains provisions that may delay, deter or prevent a future takeover or change in control of our company for so long as we remain a public company with more than 50 shareholders and net tangible assets of S$5 million or more. Any person acquiring an interest, whether by a series of transactions over a period of time or not, either on their own or together with parties acting in concert with such person, in 30% or more of our voting shares, or, if such person holds, either on their own or together with parties acting in concert with such person, between 30% and 50% (both inclusive) of our voting shares, and such person (or parties acting in concert with such person) acquires additional voting shares representing more than 1% of our voting shares in any six-month period, must, except with the consent of the Securities Industry Council in Singapore, extend a mandatory takeover offer for the remaining voting shares in accordance with the provisions of the Singapore Code on Take-overs and Mergers. While the Singapore Code on Take-overs and Mergers seeks to ensure equality of treatment among shareholders, its provisions may discourage or prevent certain types of transactions involving an actual or threatened change of control of our company. These legal requirements may impede or delay a takeover of our company by a third-party, which could adversely affect the value of our ordinary shares.
Our actual operating results may differ significantly from our guidance.
From time to time, we release guidance regarding our future performance that represents our management’s estimates as of the date of release. This guidance, which consists of forward-looking statements, is prepared by our management and is qualified by, and subject to, the assumptions and the other information contained or referred to in the release. Our guidance is not prepared with a view toward compliance with published guidelines of the American Institute of Certified Public Accountants, and neither any independent registered public accounting firm nor any other independent expert or outside party compiles, examines or reviews the guidance and, accordingly, no such person expresses any opinion or any other form of assurance with respect thereto.
Guidance is based upon a number of assumptions and estimates that, while presented with numerical specificity, is inherently subject to significant business, economic and competitive uncertainties and contingencies, many of which are beyond our control and are based upon specific assumptions with respect to future business decisions, some of which will change. We generally state possible outcomes as high and low ranges which are intended to provide a sensitivity analysis as variables are changed but are not intended to represent that actual results could not fall outside of these ranges. The principal reason that we release this data is to provide a basis for our management to discuss our business outlook with analysts and investors. We do not accept any responsibility for any projections or reports published by any such persons.
Guidance is necessarily speculative in nature, and it can be expected that some or all of the assumptions of the guidance furnished by us will not materialize or will vary significantly from actual results, particularly any guidance relating to the results of operations of acquired businesses or companies as our management will, necessarily, be less familiar with their business, procedures and operations. Accordingly, our guidance is only an estimate of what management believes is realizable as of the date of release. Actual results will vary from the guidance and the variations may be material. Investors should also recognize that the reliability of any forecasted financial data will diminish the farther in the future that the data are forecast. In light of the foregoing, investors are urged to put the guidance in context and not to place undue reliance on it.
Any failure to successfully implement our operating strategy or the occurrence of any of the events or circumstances set forth in this Annual Report on Form 10-K could result in the actual operating results being different than the guidance, and such differences may be adverse and material.
Risks Relating to Restricted Exchangeable Units
The exchange of the Partnership REUs into Broadcom ordinary shares is subject to significant restrictions, including the right of Broadcom in its sole discretion to cause the Partnership to repurchase such Partnership REUs for cash instead of Broadcom ordinary shares.
Holders of Partnership REUs, or Limited Partners, may, subject to compliance with the procedures set forth in the Partnership’s amended and restated exempted limited partnership agreement, as amended from time to time, or the Partnership Agreement, require the Partnership to repurchase all or any portion of such Limited Partner’s Partnership REUs in exchange for Broadcom ordinary shares, at a ratio of one Broadcom ordinary share for each Partnership REU, or the Exchange Right. However, Broadcom, in its sole discretion as General Partner, has the right to cause the Partnership to repurchase the Partnership REUs for cash (in an amount determined in accordance with the terms of the Partnership Agreement based on the market price of Broadcom ordinary shares) in lieu of Broadcom ordinary shares. Although we are currently issuing Broadcom ordinary shares upon exchange of Partnership REUs, Broadcom, in its sole discretion as General Partner, may choose to cause the Partnership to repurchase the Partnership REUs for cash at any time and without notice. The payment of cash upon exchange of Partnership REUs could result in, among other things, tax consequences that differ from those that would have resulted if the holder of such Partnership REUs had received Broadcom ordinary shares.

30

Table of Contents

In addition, prior to February 1, 2019, following the effective time of the Broadcom Merger, it is a condition precedent to the obligation of the Partnership to repurchase such Partnership REUs, and the holder of such Partnership REUs shall not be permitted to exercise the Exchange Right, unless (i) Broadcom has received a written opinion from an independent nationally recognized law or accounting firm that the Exchange Right should not cause Broadcom to be treated as (a) a “surrogate foreign corporation” (within the meaning of Section 7874(a)(2)(B) of the Code) or (b) a “domestic corporation” (within the meaning of Section 7874(b) of the Code) and (ii) Broadcom’s independent auditor has determined that no reserve shall be required for financial accounting purposes relating to Section 7874 of the Code as a result of the exercise of such Exchange Right. Although Limited Partners are currently permitted to exercise their Exchange Rights, no assurance can be provided as to whether the above conditions precedent will be satisfied in the future.
The exchange of Partnership REUs is a U.S. taxable event.
The exchange of Partnership REUs will be treated for U.S. tax purposes as a taxable sale of the Partnership REUs by the Limited Partner making the exchange. A Limited Partner will recognize gain or loss for U.S. income tax purposes in an amount equal to the fair market value of our ordinary shares or the cash amount received in the exchange, plus the amount of the Partnership’s liabilities allocable to the Partnership REUs being exchanged, less the Limited Partner’s adjusted tax basis in the Partnership REUs exchanged. The recognition of any loss resulting from an exchange of Partnership REUs is subject to a number of limitations set forth in the Code. It is possible that the amount of gain recognized or even the tax liability resulting from the gain could exceed the value of our ordinary shares or cash amount received upon the exchange. In addition, a Limited Partner may have difficulty finding buyers for a substantial number of ordinary shares in order to raise cash to pay tax liabilities associated with the exchange of their Partnership REUs and may not receive a price for the ordinary shares equal to the value of the Partnership REUs at the time of the exchange.
An active trading market for Partnership REUs is not expected to develop.
The Partnership REUs are not listed on a national exchange in the United States or on a foreign exchange. An active trading market for the Partnership REUs is not expected to develop. In addition, although the Partnership REUs are registered under the Exchange Act, Broadcom, as General Partner, is under no obligation to continue such registration and is authorized to deregister the Partnership REUs at any time such registration is not legally required. As a result, it will be very difficult to sell the Partnership REUs at a price that is attractive, or at all.
Future sales of Broadcom ordinary shares in the public market could cause the value of Partnership REUs to fall.
Sales of a substantial number of Broadcom ordinary shares in the public market, or the perception that these sales might occur, could depress the value of the Partnership REUs because the value of the Partnership REUs is derivative of the value of Broadcom ordinary shares.
The value of the Broadcom ordinary shares received in any exchange of the Partnership REUs, or the cash amount to be paid by us in lieu thereof, may fluctuate.
The value of the Broadcom ordinary shares into which the Partnership REUs may be exchanged, or the cash amount to be paid by the Partnership in lieu thereof, may be subject to significant fluctuations for many reasons.
Consequently, due to these potential fluctuations in value of Broadcom ordinary shares, at the time that the Exchange Right is exercised, the Broadcom ordinary shares into which Partnership REUs may be exchanged, or the cash amount to be paid in lieu thereof, may have a value that differs from the value of Broadcom ordinary shares as of the effective time of the Broadcom Merger. Also see “At times, Broadcom’s share price has been volatile and it may fluctuate substantially in the future, which could result in substantial losses for our investors as well as class action litigation against us and our management which could cause us to incur substantial costs and divert our management’s attention and resources.” regarding fluctuations in the value of Broadcom ordinary shares.
There can be no assurance that the Partnership will continue to declare cash distributions.
Pursuant to the terms of the Partnership Agreement, Broadcom, as General Partner, and our Limited Partners are entitled to receive distributions from the Partnership if and when Broadcom pays dividends to holders of its ordinary shares. There can be no assurance that Broadcom will declare cash dividends in the future in any particular amounts, or at all. Also see “There can be no assurance that we will continue to declare cash dividends.” regarding factors that may affect the timing and amount of dividends paid by Broadcom.
In certain circumstances, a Limited Partner may lose its limited liability status.
The Exempted Limited Partnership Law, 2014 of the Cayman Islands, as amended and any successor to such statute, or the Cayman Islands Limited Partnerships Act, provides a limited partner with the benefits of limited liability unless, in addition to exercising rights and powers as a limited partner, such limited partner takes part in the control or conduct of the business of the limited partnership (subject to certain qualifications and exceptions). Subject to the provisions of the Cayman Islands

31

Table of Contents

Limited Partnerships Act and of similar legislation in other jurisdictions, the liability of each limited partner for the debts, liabilities and obligations of the Partnership will be limited to the limited partner’s capital contribution, plus the limited partner’s share of any undistributed income of the Partnership. However, pursuant to the Cayman Islands Limited Partnerships Act, where a limited partner has received a payment representing the return of all or part of that limited partner’s capital contribution or is released from any outstanding obligation in respect of his commitment and, at the time that payment was made or release effected, (i) the limited partnership is insolvent; and (ii) the limited partner had actual knowledge of the insolvency of the limited partnership, then for a period of six months, but not thereafter, such limited partner would be liable to the Partnership or, where the Partnership is dissolved, to its creditors, to repay such payment or perform the released obligation with interest to the extent that such contribution or part thereof is, necessary to discharge the liabilities of the Partnership to all creditors who extended credit or whose claims otherwise arose before the return of the capital contribution.
The limitation of liability conferred under the Cayman Islands Limited Partnerships Act may be ineffective outside the Cayman Islands except to the extent it is given extra-territorial recognition or effect by the laws of other jurisdictions. There may also be requirements to be satisfied in each jurisdiction to maintain limited liability. If limited liability is lost, limited partners may be considered to be general partners (and therefore be subject to unlimited liability) in such jurisdiction by creditors and others having claims against the Partnership.
Under certain circumstances, the voting rights of the Partnership REUs will be limited.
Each holder of Partnership REUs has the benefit of a voting trust agreement dated February 1, 2016, among the Partnership, Broadcom and the voting trustee, or the Voting Trust Agreement. Pursuant to the terms of the Voting Trust Agreement, the voting trustee holds non-economic voting preference shares of Broadcom, or Special Voting Shares, that entitle the voting trustee to a number of votes equal to the number of votes that would attach to the Broadcom ordinary shares receivable upon the exchange of the Partnership REUs as of the record date of a Broadcom shareholder meeting. Holders of Partnership REUs are entitled to direct the voting trustee under the Voting Trust Agreement to vote the number of Special Voting Shares equal to the number of Partnership REUs held by such holder in substantially all votes that are presented to the holders of Broadcom ordinary shares. However, in the event that, under applicable law, any matter requires the approval of the holder of record of a Special Voting Share, voting separately as a class, the Voting Trust Agreement restricts the ability of holders of Partnership REUs to exercise such voting rights.

ITEM 1B.
UNRESOLVED STAFF COMMENTS
None.
ITEM 2.
PROPERTIES
We are co-headquartered in Yishun, Singapore and San Jose, California. We conduct our administration, manufacturing, research and development, sales and marketing in both owned and leased facilities. We believe that our owned and leased facilities are adequate for our present operations. We do not identify or allocate assets by operating segment.
As of October 29, 2017, our principal facilities consisted of:
(Square Feet)
 
Singapore
 
United States
 
Other Countries
 
Total
Owned facilities 1
 
37,352

 
1,998,866

 
493,000

 
2,529,218

Leased facilities 2
 
260,843

 
1,638,362

 
1,419,474

 
3,318,679

Total facilities
 
298,195

 
3,637,228

 
1,912,474

 
5,847,897

_______________
 
 
 
 
 
 
 
 
1 Includes 37,352 square feet of property owned in Singapore subject to 30-year land lease with the state authority expiring in September 2029, subject to renewal at our option. Also includes 318,000 square feet and 158,000 square feet of property owned in Malaysia subject to a 60-year land lease with the state authority expiring in May 2051 and October 2077, respectively, subject to renewal at our option.
2 Building leases expire on varying dates through October 2030 and generally include renewals at our option.
ITEM 3.
LEGAL PROCEEDINGS
The information set forth under Note 14. “Commitments and Contingencies” included in Part II, Item 8. of this Annual Report on Form 10-K, is incorporated herein by reference. For an additional discussion of certain risks associated with legal proceedings, see “Risk Factors” above.
ITEM 4.
MINE SAFETY DISCLOSURES
None.

32

Table of Contents

PART II
ITEM 5.
MARKET FOR THE REGISTRANT’S COMMON EQUITY, RELATED SHAREHOLDER MATTERS AND ISSUER SALE AND PURCHASES OF EQUITY SECURITIES
Market Information
Broadcom ordinary shares are listed on The Nasdaq Global Select Market under the symbol “AVGO”. The following table sets forth, for each quarterly period presented, the high and low sales prices of our ordinary shares as reported by The Nasdaq Global Select Market:
 
Market Prices
 
High
 
Low
Fiscal Year ended October 30, 2016:
 
 
 
First Quarter (ended February 1, 2016)
$
149.72

 
$
115.21

Second Quarter (ended May 1, 2016)
$
159.65

 
$
114.25

Third Quarter (ended July 31, 2016)
$
167.60

 
$
139.18

Fourth Quarter (ended October 30, 2016)
$
179.42

 
$
158.75

Fiscal Year ended October 29, 2017:
 
 
 
First Quarter (ended January 29, 2017)
$
205.79

 
$
160.62

Second Quarter (ended April 30, 2017)
$
227.75

 
$
198.86

Third Quarter (ended July 30, 2017)
$
258.49

 
$
219.91

Fourth Quarter (ended October 29, 2017)
$
259.36

 
$
231.53

Holders
As of November 24, 2017, there were 301 holders of record of Broadcom ordinary shares. A substantially greater number of shareholders are “street name” or beneficial holders, whose shares are held of record by banks, brokers and other financial institutions.
As of November 24, 2017, there were 633 holders of record of the Partnership REUs.
Dividends and Distributions
In fiscal years 2017 and 2016, Broadcom declared and paid the following quarterly cash dividends, on a per share basis:
 
Fiscal Year
 
2017
 
2016
First Quarter
$
1.02

 
$
0.44

Second Quarter
$
1.02

 
$
0.49

Third Quarter
$
1.02

 
$
0.50

Fourth Quarter
$
1.02

 
$
0.51

Pursuant to the Partnership Agreement, starting in the second quarter of fiscal year 2016 and onwards, a cash distribution per Partnership REU was declared and paid equal to, and simultaneously with, that of the Broadcom quarterly cash dividend per ordinary share.
On December 4, 2017, the Board declared an interim cash dividend of $1.75 per Broadcom ordinary share, payable on December 29, 2017 to shareholders of record at the close of business (Eastern Time) on December 19, 2017, or the Broadcom Dividend. Broadcom paid aggregate cash dividends and distributions of $1,745 million and $750 million in fiscal years 2017 and 2016, respectively.
The Partnership will pay a cash distribution in an amount equal to the aggregate amount of the Broadcom Dividend to Broadcom, as General Partner, and a $1.75 distribution per Partnership REU, payable on December 29, 2017, to limited partners of record at the close of business (Eastern Time) on December 19, 2017. The Partnership made aggregate distributions of $92 million and $34 million on its Partnership REUs during fiscal years 2017 and 2016, respectively.
Our Board reviews our dividend policy annually targeting a projected quarterly per share dividend amount for the full fiscal year. However, the declaration and payment of any future cash dividends (and therefore any future cash distributions) are at the discretion and approval of our Board and subject to our Board’s continuing determination that they are in our best

33

Table of Contents

interests. Future dividend payments will also depend upon factors such as our earnings level, capital requirements, contractual restrictions, cash position, overall financial condition and any other factors deemed relevant by our Board.
The payment of cash dividends on Broadcom ordinary shares is restricted under applicable law and our corporate structure. Pursuant to Singapore law and Broadcom’s Constitution, no cash dividends may be paid except out of our profits, or expected profits. Also, because we are a holding company, our ability to pay cash dividends on Broadcom ordinary shares and cash distributions on our Partnership REUs may be limited by restrictions on our ability to obtain sufficient funds through dividends from subsidiaries, including restrictions under the terms of agreements governing our indebtedness.
Recent Sales of Unregistered Equity Securities
None.
Issuer Purchases of Equity Securities
None.
Share Performance Graph
The following graph shows a comparison of cumulative total return for our ordinary shares, the Standard & Poor’s 500 Stock Index, or S&P 500 Index, and the Philadelphia Semiconductor Index, or PHLX Semiconductor Index. The graph covers the period from October 26, 2012 (the last trading day of our fiscal year 2012) to October 27, 2017 (the last trading day of our fiscal year 2017). The total return graph and table assume that $100 was invested on October 26, 2012 in Avago Technologies Limited ordinary shares for each of the S&P 500 Index and the PHLX Semiconductor Index and assumes all dividends are reinvested. Indexes are calculated on a month-end basis.
The comparisons in the graph below are based on historical data and are not indicative of, or intended to forecast, the possible future performance of our ordinary shares.

34

Table of Contents

Comparison of Five Year Cumulative Total Return
Among Broadcom Limited, the S&P 500 Index and the PHLX Semiconductor Index
avgo-102920_chartx42076a01.jpg
 
 
October 28, 2012
 
November 3, 2013
 
November 2, 2014
 
November 1, 2015
 
October 30, 2016
 
October 29, 2017
Broadcom Limited
 
$
100.00

 
$
135.09

 
$
264.91

 
$
382.93

 
$
533.27

 
$
811.36

S&P 500 Index
 
$
100.00

 
$
127.58

 
$
149.18

 
$
156.94

 
$
164.03

 
$
203.21

PHLX Semiconductor Index
 
$
100.00

 
$
140.10

 
$
180.71

 
$
191.38

 
$
241.17

 
$
378.46

The graph and the table above shall not be deemed “filed” with the SEC for the purposes of Section 18 of the Exchange Act or otherwise subject to the liabilities of that section, nor shall it be deemed incorporated by reference in any filing made by us with the SEC, regardless of any general incorporation language in such filing.
Securities Authorized for Issuance Under Equity Compensation Plans
The information required by this item regarding securities authorized for issuance under equity compensation plans is incorporated herein by reference to the definitive Proxy Statement for our 2018 annual general meeting of shareholders to be filed with the SEC within 120 days after the end of fiscal year 2017.

35

Table of Contents

ITEM 6.
SELECTED FINANCIAL DATA
The following table sets forth the selected consolidated financial data for Broadcom and the Partnership. We report financial results on a 52-or 53-week fiscal year. Our fiscal year ends on the Sunday closest to October 31 in a 52-week year and on the first Sunday in November in a 53-week year. Our fiscal year 2013 was a 53-week fiscal year. You should read the following selected consolidated financial data together with the information included under the headings “Risk Factors” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our historical financial statements and related notes included elsewhere in this Annual Report on Form 10-K.
Summary of Five Year Selected Financial Data
 
 
 
 
 
 
 
 
 
 
 
 
Fiscal Year Ended
 
 
October 29,
2017
 
October 30,
2016
 
November 1,
2015
 
November 2,
2014
 
November 3,
2013
 
 
 
 
 
 
 
 
 
 
 
 
 
(In millions, except per share amounts)
Statement of Operations Data: (1)
 
 
 
 

 
 

 
 

 
 

Net revenue
 
$
17,636

 
$
13,240

 
$
6,824

 
$
4,269

 
$
2,520

Cost of products sold:
 
 
 
 
 
 

 
 

 
 

Cost of products sold (2)
 
6,593

 
5,295

 
2,750

 
1,911

 
1,251

Purchase accounting effect on inventory
 
4

 
1,185

 
30

 
210

 
9

Amortization of acquisition-related intangible assets
 
2,511

 
763

 
484

 
249

 
61

Restructuring charges (3)
 
19

 
57

 
7

 
22

 
1

Total cost of products sold
 
9,127

 
7,300

 
3,271

 
2,392

 
1,322

Gross margin
 
8,509

 
5,940

 
3,553

 
1,877

 
1,198

Research and development
 
3,292

 
2,674

 
1,049

 
695

 
398

Selling, general and administrative (2)
 
787

 
806

 
486

 
407

 
222

Amortization of acquisition-related intangible assets
 
1,764

 
1,873

 
249

 
197

 
24

Restructuring, impairment and disposal charges (3)
 
161

 
996

 
137

 
140

 
2

Litigation settlements (4)
 
122

 

 

 

 

Total operating expenses
 
6,126

 
6,349

 
1,921

 
1,439

 
646

Operating income (loss) (5)
 
2,383

 
(409
)
 
1,632

 
438

 
552

Interest expense (6)
 
(454
)
 
(585
)
 
(191
)
 
(110
)
 
(2
)
Loss on extinguishment of debt (7)
 
(166
)
 
(123
)
 
(10
)
 

 

Other income, net
 
62

 
10

 
36

 
14

 
18

Income (loss) from continuing operations before income taxes
 
1,825

 
(1,107
)
 
1,467

 
342

 
568

Provision for income taxes (8)
 
35

 
642

 
76

 
33

 
16

Income (loss) from continuing operations
 
1,790

 
(1,749
)
 
1,391

 
309

 
552

Loss from discontinued operations, net of income taxes (9)
 
(6
)
 
(112
)
 
(27
)
 
(46
)
 

Net income (loss)
 
1,784

 
(1,861
)
 
1,364

 
263

 
552

Net income (loss) attributable to noncontrolling interest (10)
 
92

 
(122
)
 

 

 

Net income (loss) attributable to ordinary shares
 
$
1,692

 
$
(1,739
)
 
$
1,364

 
$
263

 
$
552

 
 
 
 
 
 
 
 
 
 
 
Income (loss) per ordinary share (diluted):
 
 
 
 
 
 

 
 

 
 

Income (loss) per share from continuing operations
 
$
4.03

 
$
(4.57
)
 
$
4.95

 
$
1.16

 
$
2.19

Loss per share from discontinued operations
 
(0.01
)
 
(0.29
)
 
(0.10
)
 
(0.17
)
 

Net income (loss) per share
 
$
4.02

 
$
(4.86
)
 
$
4.85

 
$
0.99

 
$
2.19

 
 
 
 
 
 
 
 
 
 
 
Cash dividend declared and paid per ordinary share
 
$
4.08

 
$
1.94

 
$
1.55

 
$
1.13

 
$
0.80


36

Table of Contents

 
 
October 29,
2017
 
October 30,
2016
 
November 1,
2015
 
November 2,
2014
 
November 3,
2013
 
 
 
 
 
 
 
 
 
 
 
 
 
(In millions)
Balance Sheet Data: (1)
 
 
 
 

 
 

 
 

 
 

Cash and cash equivalents (11)
 
$
11,204

 
$
3,097

 
$
1,822

 
$
1,604

 
$
985

Total assets
 
$
54,418

 
$
49,966

 
$
10,515

 
$
10,376

 
$
3,415

Debt and capital lease obligations
 
$
17,569

 
$
13,642

 
$
3,872

 
$
5,395

 
$
2

Total shareholders' equity
 
$
23,186

 
$
21,876

 
$
4,714

 
$
3,243

 
$
2,886

Other Financial Data:
 
 
 
 
 
 
 
 
 
 
Earnings to fixed charges ratio (12)
 
4.20

 

 
7.60

 
3.70

 
94.40

Shareholders’ equity, partners’ capital and the Limited Partners’ noncontrolling interest in Broadcom are the primary areas of difference between the consolidated financial statements of Broadcom and those of the Partnership. The following table sets forth certain Partnership data, as well as these primary differences.
 
 
Fiscal Year Ended
 
 
October 29,
2017
 
October 30,
2016
 
November 1,
2015
 
November 2,
2014
 
November 3,
2013
 
 
 
 
 
 
 
 
 
 
 
 
 
(In millions, except per share amounts)
Partnership Data:
 
 
 
 
 
 
 
 
 
 
General Partner's interest in net income (loss)
 
$
1,692

 
$
(2,116
)
 
$

 
$

 
$

Limited Partners' interest in net income (loss)
 
$
92

 
$
(122
)
 
$

 
$

 
$

Net income attributable to ordinary shareholders
 
$

 
$
377

 
$
1,364

 
$
263

 
$
552

 
 
 
 
 
 
 
 
 
 
 
Cash distribution paid per restricted exchangeable partnership unit
 
$
4.08

 
$
1.50

 
$

 
$

 
$

Cash distribution paid to General Partner
 
$
1,756

 
$
594

 
$

 
$

 
$

Cash dividends paid per ordinary share
 
$

 
$
0.44

 
$
1.55

 
$
1.13

 
$
0.80

 
 
 
 
 
 
 
 
 
 
 
Total partners’ capital/shareholders’ equity
 
$
23,083

 
$
21,876

 
$
4,714

 
$
3,243

 
$
2,886

_______________________________________
(1)
On February 1, 2016, we acquired BRCM for total consideration of approximately $35.7 billion. On May 5, 2015, we acquired Emulex for total consideration of approximately $587 million. On August 12, 2014, we acquired PLX for total consideration of approximately $308 million. On May 6, 2014, we acquired LSI for total consideration of approximately $6.5 billion. On June 28, 2013, we acquired CyOptics, Inc. for total consideration of approximately $380 million. The results of operations of the acquired companies and estimated fair value of assets acquired and liabilities assumed were included in our financial statements from the respective acquisition dates.
(2)
We incurred acquisition-related costs of $98 million, $139 million, $74 million and $74 million in fiscal years 2017, 2016, 2015 and 2014, respectively, of which $97 million, $138 million, $71 million and $67 million were presented as part of operating expenses, and the remainder was presented as part of cost of products sold.
(3)
Fiscal years 2017, 2016, 2015 and 2014 restructuring charges primarily reflect actions taken to implement planned cost reduction and restructuring activities in connection with the acquisitions. We also incurred $56 million, $590 million and $61 million in-process research and development and other asset impairment charges in fiscal years 2017, 2016 and 2015, respectively.
(4)
Primarily represents litigation charges associated with certain legal settlement agreements.
(5)
Includes share-based compensation expense of $920 million, $664 million, $232 million, $153 million and $77 million for fiscal years 2017, 2016, 2015, 2014 and 2013, respectively. Share-based compensation expense includes the impact of equity awards assumed as part of the acquisitions, as well as the impact of special long-term compensation and retention equity awards.
(6)
Interest expense in fiscal years 2017 and 2016 includes coupon and contractual interest, accretion of the original issue discount, amortization of debt issuance costs related to our outstanding debt and debt modification fees

37

Table of Contents

related to financing the Broadcom Merger. Interest expense in fiscal years 2015 and 2014 includes interest on the 2.0% Convertible Senior Notes due 2021.
(7)
Loss on extinguishment of debt was primarily due to the debt issuance cost write-off that resulted from repayments of certain debt.
(8)
Our provision for income taxes for fiscal year 2017 primarily relates to income from continuing operations, partially offset by $273 million of excess tax benefits from share-based awards recognized upon adoption of an accounting standards update. Our provision for income taxes for fiscal year 2016 included $93 million of expenses related to the undistributed earnings of foreign operations that were previously considered indefinitely reinvested, partially offset by income tax benefits from losses on continuing operations and the recognition of previously unrecognized tax benefits as a result of audit settlements. For fiscal years 2015, 2014, 2013 our provision for income taxes fluctuates mainly based on changes in jurisdictional mix of income. 
(9)
During fiscal years 2016, 2015 and 2014, we sold certain businesses related to the acquisitions of BRCM, Emulex and LSI for a gain of $36 million, a loss of $14 million and a gain of $18 million, respectively.
(10)
As a result of Broadcom’s controlling interest in the Partnership, we consolidate the financial results of the Partnership and present a noncontrolling interest for the portion of the Partnership it does not own in our consolidated financial statements. This represents the portion of net income (loss) attributable to the economic interest in the Partnership owned by the Limited Partners.
(11)
The Partnership’s cash and cash equivalents at October 29, 2017 and October 30, 2016 were $11.0 billion and $3.0 billion, respectively. The balance differences result from the timing of capital contributions from Broadcom to the Partnership and distributions from the Partnership to Broadcom.
(12)
Fixed charges consist of interest expense on all indebtedness plus amortization of debt issuance costs and accretion of debt discount, capitalized interest and an estimate of interest expense within rental expense. Earnings consist of income from continuing operations before income taxes plus fixed charges and amortization of capitalized interest less capitalized interest. Earnings for the fiscal year 2016 were inadequate to cover fixed charges as the coverage deficiency was $1,123 million.

38

Table of Contents

ITEM 7.
MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
This Management’s Discussion and Analysis of Financial Condition and Results of Operations should be read in conjunction with “Selected Financial Data” and our consolidated financial statements and notes thereto which appear elsewhere in this Annual Report on Form 10-K. This discussion may contain forward-looking statements based upon current expectations that involve risks and uncertainties. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of various factors, including those set forth under the caption “Risk Factors” or in other parts of this Annual Report on Form 10-K.
Overview
Broadcom Limited, or Broadcom, is the successor to Avago Technologies Limited, or Avago, as a result of its acquisition of Broadcom Corporation, or BRCM. We are a leading designer, developer and global supplier of a broad range of semiconductor devices with a focus on complex digital and mixed signal complementary metal oxide semiconductor based devices and analog III-V based products. We have a history of innovation and offer thousands of products that are used in end products such as enterprise and data center networking, home connectivity, set-top boxes, broadband access, telecommunication equipment, mobile handsets and base stations, data center servers and storage systems, factory automation, power generation and alternative energy systems, and electronic displays. We have four reportable segments: wired infrastructure, wireless communications, enterprise storage, and industrial & other, which align with our principal target markets.
Broadcom Cayman L.P., or the Partnership, is an exempted limited partnership formed under the laws of the Cayman Islands. Pursuant to the amended and restated exempted limited partnership agreement, or the Partnership Agreement, it authorized its common partnership units and restricted exchangeable limited partnership units, or Partnership REUs. The Partnership REUs are deemed to be registered under Section 12(b) of the Securities Exchange Act of 1934, as amended, or the Exchange Act, and the Partnership is subject to the informational requirements of the Exchange Act and the rules and regulations promulgated thereunder. Broadcom, its General Partner, has the exclusive right, power and authority to manage, control, administer and operate the business and affairs and to make decisions regarding the undertaking and business of the Partnership in accordance with the Partnership Agreement, and applicable laws. There is no board of directors of the Partnership.
Original equipment manufacturers, or OEMs, or their contract manufacturers, and distributors typically account for the substantial majority of our sales. We have established strong relationships with leading OEM customers across multiple target markets and we have a direct sales force focused on supporting large OEMs. We also distribute a substantial portion of our products through our broad distribution network, and a significant amount of these sales are to large global electronic components distributors, including Avnet, Inc.
The demand for our products has been affected in the past, and is likely to continue to be affected in the future, by various factors, including the following:
general economic and market conditions in the semiconductor industry and in our target markets;
our ability to define specifications for, develop or acquire, complete, introduce and market, new products and technologies in a cost-effective and timely manner;
the timing, rescheduling or cancellation of expected customer orders;
the rate at which our present and future customers and end-users adopt our products and technologies in our target markets, and the rate at which our customers' products that include our technology are accepted in their markets; and
the qualification, availability and pricing of competing products and technologies and the resulting effects on sales and pricing of our products.
Uncertainty in global economic conditions poses significant risks to our business. For example, customers may defer purchases in response to tighter credit and negative financial news, which would in turn adversely affect product demand and our results of operations.
Fiscal Year Highlights
Highlights during fiscal year 2017 include the following:
Our cash and cash equivalents were $11,204 million at October 29, 2017, compared with $3,097 million at October 30, 2016, which primarily included the net proceeds from the issuance of the October 2017 Senior Notes (defined below).

39

Table of Contents

We generated $6,551 million of cash from operations during fiscal year 2017.
Broadcom paid aggregate cash dividends on its ordinary shares of $1,653 million, and the Partnership made aggregate distributions of $92 million on its Partnership REUs during fiscal year 2017.
On January 19, 2017, we completed the issuance and sale of senior unsecured notes, or the January 2017 Senior Notes, in an aggregate principal amount of $13,550 million. The net proceeds, together with cash on hand, were used to repay all of the outstanding term loans under our guaranteed, collateralized credit agreement entered into on February 1, 2016, or the 2016 Credit Agreement, in the aggregate amount of $13,555 million. In addition, on October 17, 2017, we completed the issuance and sale of senior unsecured notes, or the October 2017 Senior Notes, in an aggregate principal amount of $4,000 million. The net proceeds, together with cash on hand, were used to finance the acquisition of Brocade Communication Systems, Inc., or Brocade, as discussed in detail below.
Recent Developments
U.S. 2017 Tax Reform Act
On December 20, 2017, the Tax Cuts and Jobs Act, or the 2017 Tax Reform Act, was approved by Congress and is pending presidential approval. In general, the 2017 Tax Reform Act reduces the U.S. corporate income tax rate from 35% to 21%, effective in 2018. The 2017 Tax Reform Act moves from worldwide business taxation to a participation exemption regime. The 2017 Tax Reform Act also imposes base-erosion prevention measures on non-U.S. earnings of U.S. entities, as well as a one-time mandatory deemed repatriation tax on accumulated non-U.S. earnings of U.S. entities. The base-erosion prevention measures will have the effect of subjecting non-U.S. earnings of U.S. entities to taxation in the United States at an effective rate that is expected to be substantially lower than 21%. The 2017 Tax Reform Act will affect the tax position and cash taxes of our U.S. entities and will have a corresponding impact on our consolidated financial results starting in the first quarter of our fiscal year 2018.
Acquisition of Brocade Communications Systems, Inc.
On November 17, 2017, pursuant to the Agreement and Plan of Merger, by and among Broadcom, BRCM, Brocade, and Bobcat Merger Sub, Inc., or Merger Sub, which BRCM subsequently assigned to LSI Corporation on December 18, 2016, Merger Sub merged with and into Brocade with Brocade as the surviving corporation, or the Brocade Merger. As a result, Brocade stockholders who did not perfect their appraisal rights with respect to the Brocade Merger received, in aggregate, approximately $5.3 billion in cash in exchange for all shares of Brocade common stock issued and outstanding immediately prior to the effective time of the Brocade Merger. We also paid $701 million to retire Brocade’s term loan. In addition, we assumed certain vested (to the extent not in-the-money) and all unvested Brocade stock options, restricted stock units, or RSUs, and performance stock units, or PSUs, held by continuing employees and service providers. All vested in-the-money Brocade stock options, after giving effect to any acceleration, and all other RSUs and PSUs were cashed out upon the Brocade Merger. As a result of the Brocade Merger, Brocade became an indirect subsidiary of the Partnership.
We financed the Brocade Merger with the net proceeds from the October 2017 Senior Notes as discussed in further detail below under “Indebtedness,” as well as cash on hand.
Divestiture of Brocade’s IP Networking Business
Following the Brocade Merger, on December 1, 2017, we sold Brocade’s IP Networking business, including the Ruckus Wireless and ICX Switch businesses, to ARRIS International plc for cash consideration of $800 million, plus unvested assumed employee stock awards.
Proposed Acquisition of Qualcomm Incorporated
On November 6, 2017, we announced a proposal to acquire Qualcomm Incorporated, or Qualcomm, for $70.00 per share, consisting of $60.00 in cash and $10.00 in Broadcom ordinary shares. We stated that the proposal stands whether Qualcomm’s pending acquisition of NXP Semiconductors N.V., or NXP, is consummated on the then-disclosed terms of $110.00 per NXP share or is terminated. Including the assumption of net debt and giving effect to the pending NXP acquisition, the enterprise value of the proposed transaction is approximately $130 billion.
On November 13, 2017, Qualcomm’s board of directors rejected our proposal. In response, we announced that we remained fully committed to pursuing the acquisition of Qualcomm and reiterated our proposal.
On December 4, 2017, we announced that we had provided notice to Qualcomm of our intent to nominate 11 candidates for election to the Qualcomm board of directors at Qualcomm’s 2018 annual meeting of stockholders.
On December 11, 2017, we filed preliminary proxy materials with the Securities and Exchange Commission, or the SEC, in connection with our planned solicitation of proxies to elect 11 independent, highly qualified nominees to the Qualcomm

40

Table of Contents

board of directors at Qualcomm’s 2018 annual meeting of stockholders, which Qualcomm has announced will be held on March 6, 2018.
We also filed a premerger notification under the Hart-Scott-Rodino Antitrust Improvements Act of 1976 with the U.S. Department of Justice and the Federal Trade Commission regarding our proposed acquisition of Qualcomm.
No agreement has been reached with Qualcomm and there can be no assurance that any transaction will result from our proposal.
Redomiciliation to the United States from Singapore
On November 2, 2017, we announced our intention to initiate a process to change the ultimate parent company of the Broadcom group from a Singapore company to a U.S. corporation. The final form and timing of the redomiciliation has not yet been finalized and may be affected by the implementation of the 2017 Tax Reform Act. In addition, the redomiciliation is subject to the approval of our shareholders. We presently expect that our overall cash tax costs will approximately double, as compared to our fiscal year 2017 results, due to the redomiciliation and taking in account our initial estimates of the expected effects of the 2017 Tax Reform Act.
Acquisitions and Divestitures
The discussion and analysis in this section and the accompanying consolidated financial statements include the results of operations of acquired companies commencing on their respective acquisition dates.
Broadcom Corporation
On February 1, 2016, Broadcom became the successor to Avago and acquired BRCM, or the Broadcom Merger, in which, Avago shareholders exchanged their shares on a one-for-one basis for newly issued Broadcom ordinary shares and BRCM shareholders received, in aggregate, approximately $16.8 billion in cash, 112 million Broadcom ordinary shares and 23 million Partnership REUs in exchange for all shares of BRCM common stock, par value $0.0001 per share, issued and outstanding immediately prior to the effective time of the Broadcom Merger. In addition, we also paid $137 million in cash for vested BRCM equity awards. Broadcom also assumed unvested RSUs originally granted by BRCM and converted them into 6 million Broadcom RSUs.
The aggregate consideration for the Broadcom Merger was approximately $35.7 billion. We funded the cash portion of the Broadcom Merger with net proceeds from the issuance of $15.6 billion in term loans under the 2016 Credit Agreement, that we entered into at the time of closing of the Broadcom Merger, as well as cash on hand of the combined companies. The financial results provided in this Annual Report on Form 10-K include the results of operations of BRCM commencing as of February 1, 2016, or the Acquisition Date.
During fiscal year 2016, we completed the sales of certain non-core BRCM businesses for aggregate cash proceeds of $830 million and recognized an aggregate gain of $36 million from the sales.
Emulex Corporation
In fiscal year 2015, we acquired Emulex Corporation, or Emulex, a leader in network connectivity, monitoring and management, for a purchase price of $587 million.
Net Revenue
Substantially all of our net revenue is derived from sales of semiconductor devices that are incorporated into electronic products, as well as from modules, switches and subsystems. Our four reportable segments are wired infrastructure, wireless communications, enterprise storage and industrial & other, which align with our target markets. Applications for our products in these segments include enterprise and data center networking, home connectivity, set-top boxes, broadband access, telecommunication equipment, mobile handsets and base stations, data center servers and storage systems, factory automation, power generation and alternative energy systems, and electronic displays.
Our overall net revenue, as well as the percentage of total net revenue generated by sales in each of our segments, has varied from quarter to quarter, due largely to fluctuations in end-market demand, including the effects of seasonality, which are discussed in detail below under “Seasonality”.
We use distributors for a significant portion of our business and recognize revenue upon delivery of product to the distributors, which can cause our quarterly net revenue to fluctuate significantly. Such revenue is reduced for estimated returns and distributor allowances. We also sell products directly to OEMs and other end customers, many of which also purchase product from our distributors and who direct contract manufacturers to purchase product from us. Historically, a relatively small number of customers has accounted for a significant portion of our net revenue. Sales to distributors accounted for 28% and 30% of our net revenue for fiscal years 2017 and 2016, respectively. Direct sales to Foxconn Technology Group companies (including Hon Hai Precision Industries), together referred to as Foxconn, accounted for 14% of our net

41

Table of Contents

revenue for both fiscal years 2017 and 2016. We believe our aggregate sales to our top five end customers, through all channels, accounted for more than 40% of our net revenue for fiscal year 2017 and more than 30% for fiscal year 2016. We believe aggregate sales to Apple, Inc., through all channels, accounted for more than 20% of our net revenue for fiscal year 2017 and approximately 15% for fiscal year 2016. We expect to continue to experience significant customer concentration in future periods. The loss of, or significant decrease in demand from, any of our top five end customers could have a material adverse effect on our business, results of operations and financial condition.
From time to time, some of our key customers place large orders or delay orders, causing our quarterly net revenue to fluctuate significantly. This is particularly true in our wireless communications segment as fluctuations may be magnified by the launches of, and seasonal variations in, sales of mobile handsets, as well as changes in the overall economic environment.
In recent years, approximately 50% of our net revenue has come from sales to distributors, OEMs or contract manufacturers located in China. However, the end customers for our products, or for the end products into which our products are incorporated, are frequently located in countries other than China. As a result, we believe that a substantially smaller percentage of our net revenue is ultimately dependent on sales of either our product, or our customers’ product incorporating our product, to end customers located in China.
Costs and Expenses
Total cost of products sold.  Cost of products sold consists primarily of the cost of semiconductor wafers and other materials, and the cost of assembly and testing of those products. Cost of products sold also includes: personnel costs and overhead related to our manufacturing operations, including share-based compensation expense, and related occupancy, computer services and equipment costs; manufacturing quality, order fulfillment, warranty and inventory adjustments, including write-downs for inventory obsolescence; energy costs; other manufacturing expenses and acquisition-related costs. Acquisition-related costs include direct transaction costs and integration-related costs. Total cost of products sold also includes the purchase accounting effect on inventory, amortization of acquisition-related intangible assets and restructuring charges.
Although we outsource a significant portion of our manufacturing activities, we also have some proprietary semiconductor fabrication facilities. If we are unable to utilize our owned fabrication facilities at a desired level, the fixed costs associated with these facilities will not be fully absorbed, resulting in higher average unit costs and lower gross margins.
Research and development.  Research and development expense consists primarily of personnel costs for our engineers engaged in the design and development of our products and technologies, including share-based compensation expense. These expenses also include project material costs, third-party fees paid to consultants, prototype development expense, allocated facilities costs and other corporate expenses and computer services costs related to supporting computer tools used in the engineering and design process.
Selling, general and administrative.  Selling expense consists primarily of compensation and associated costs for sales and marketing personnel, including share-based compensation expense, sales commissions paid to our independent sales representatives, costs of advertising, trade shows, corporate marketing, promotion, travel related to our sales and marketing operations, related occupancy and equipment costs, and other marketing costs. General and administrative expense consists primarily of compensation and associated costs for executive management, finance, human resources and other administrative personnel, outside professional fees, allocated facilities costs, acquisition-related costs and other corporate expenses.
Amortization of acquisition-related intangible assets.  In connection with our acquisitions, we recognized intangible assets that are being amortized over their estimated useful lives of 1 year to 25 years. We also recognized goodwill and in-process research and development, which are not amortized, in connection with acquisitions.
Restructuring, impairment and disposal charges. Restructuring, impairment and disposal charges consist primarily of compensation costs associated with employee exit programs, alignment of our global manufacturing operations, rationalizing product development program costs, in-process research and development impairment, fixed asset impairment, facility and lease abandonments and other exit costs, including curtailment of service or supply agreements.
Interest expense.  Interest expense includes coupon interest, commitment fees, accretion of the original issue discount and amortization of debt issuance costs related to our outstanding debt, expenses related to debt modification and ticking fees.
Other income, net.  Other income, net includes interest income, gains (losses) on foreign currency remeasurement, and other miscellaneous items.
Provision for income taxes.  We have structured our operations to maximize the benefit from tax incentives extended to us in various jurisdictions to encourage investment or employment. For example, we have obtained several tax incentives from the Singapore Economic Development Board, an agency of the Government of Singapore, which provide that qualifying

42

Table of Contents

income we earn in Singapore is subject to tax holiday or reduced rates of Singapore income tax. Subject to our compliance with the conditions specified in these incentives and legislative developments, the Singapore tax incentives are presently expected to expire at various dates generally between 2020 and 2021, subject in certain cases to potential extensions, which we may or may not be able to obtain. Absent such tax incentives, the corporate income tax rate in Singapore that would otherwise apply to us would be 17%. We also have tax holidays on our qualifying income in Malaysia, which are scheduled to expire between 2018 and 2028. The tax incentives that we have negotiated are also subject to our compliance with various operating and other conditions. If we cannot, or elect not to, comply with the operating conditions included in any particular tax incentive, we will lose the related tax benefits and we could be required to refund previously realized material tax benefits. Depending on the incentive at issue, we could also be required to modify our operational structure and tax strategy, which may not be as beneficial to us as the benefits provided under the present tax concession arrangements. For fiscal years 2017, 2016 and 2015, the effect of all these tax incentives was to reduce the overall provision for income taxes by approximately $237 million, $169 million and $207 million, respectively.
Our interpretations and conclusions regarding the tax incentives are not binding on any taxing authority, and if our assumptions about tax and other laws are incorrect or if these tax incentives are substantially modified or rescinded we could suffer material adverse tax and other financial consequences, which would increase our expenses, reduce our profitability and adversely affect our cash flows. In addition, taxable income in any jurisdiction is dependent upon acceptance of our operational practices and intercompany transfer pricing by local tax authorities as being on an arm’s length basis. Due to inconsistencies in application of the arm’s length standard among taxing authorities, as well as lack of adequate treaty-based protection, transfer pricing challenges by tax authorities could, if successful, substantially increase our income tax expense.
On November 2, 2017, we announced our intention to initiate a process to change the ultimate parent company of the Broadcom group from a Singapore company to a U.S. corporation. We would expect our overall cash tax costs to approximately double, as compared to our fiscal year 2017 results, due to the redomiciliation and taking in account our initial estimates of the effects of the 2017 Tax Reform Act.
Going forward, our overall cash tax costs will vary based on a variety of factors in addition to the impact caused by the redomiciliation of our ultimate parent company from Singapore to the U.S., including reorganizations or restructurings of our businesses or assets, overall profitability, the jurisdictional mix of income before income taxes and changes in tax regulations or policy, and discrete events, such as settlements of future audits and acquisitions we may make from time to time. Our actual effective tax costs and overall effective rate may vary from our expectations and that variance may be material. In particular, we may owe significant taxes in jurisdictions outside our country of domicile during periods when we are profitable in those jurisdictions even though we may be experiencing low operating profit or operating losses on a consolidated basis, potentially resulting in significant tax liabilities on a consolidated basis during those periods. Our historical provision for income taxes is not necessarily reflective of our future results of operations.
Critical Accounting Estimates
The preparation of financial statements in accordance with generally accepted accounting principles in the United States, or GAAP, requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the reporting period. We base our estimates and assumptions on current facts, historical experience and various other factors that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities and the accrual of costs and expenses that are not readily apparent from other sources. Our actual financial results may differ materially and adversely from our estimates. Our critical accounting policies are those that affect our historical financial statements materially and involve difficult, subjective or complex judgments by management. Those policies include revenue recognition, business combinations, valuation of long-lived assets, intangible assets and goodwill, inventory valuation, income taxes, retirement and post-retirement benefit plan assumptions, share-based compensation and employee bonus programs. See Note 2. “Summary of Significant Accounting Policies” included in Part II, Item 8. of this Annual Report on Form 10-K for further information on our critical accounting policies and estimates.
Revenue recognition.  We recognize revenue from sales of our products to distributors upon delivery of product to the distributors. An allowance for distributor credits covering price adjustments is made based on our estimate of historical experience rates as well as considering economic conditions and contractual terms. To date, actual distributor claims activity has been materially consistent with the provisions we have made based on our historical estimates. However, because of the inherent nature of estimates, there is always a risk that there could be significant differences between actual amounts and our estimates. Different judgments or estimates could result in variances that might be significant to reported operating results. We also record reductions of revenue for rebates, in the same period that the related revenue is recorded. We accrue 100% of potential rebates at the time of sale and do not apply a breakage factor. We reverse the accrual of unclaimed rebate amounts as specific rebate programs contractually end and when we believe unclaimed rebates are no longer subject to payment and

43

Table of Contents

will not be paid. Thus the reversal of unclaimed rebates may have a positive impact on our net revenue and net income in subsequent periods.
Business combinations. Accounting for business combinations requires our management to make significant estimates and assumptions, especially at the acquisition date, including our estimates for intangible assets, contractual obligations assumed, restructuring liabilities, pre-acquisition contingencies and contingent consideration, where applicable. Although we believe the assumptions and estimates we have made in the past have been reasonable and appropriate, they are based, in part, on historical experience and information obtained from the management of the acquired companies and are inherently uncertain. Critical estimates in valuing certain of the intangible assets we have acquired include, but are not limited to: future expected cash flows from product sales, customer contracts and acquired technologies, expected costs to develop in-process research and development into commercially viable products, estimated cash flows from the projects when completed, and discount rates. The discount rates used to discount expected future cash flows to present value are typically derived from a weighted-average cost of capital analysis and adjusted to reflect inherent risks. Unanticipated events and circumstances may occur that may affect the accuracy or validity of such assumptions, estimates or actual results.
Valuation of goodwill and long-lived assets.  We perform an annual impairment review of our goodwill during the fourth fiscal quarter of each year, and more frequently if we believe indicators of impairment exist. The process of evaluating the potential impairment of goodwill is highly subjective and requires significant judgment. To review for impairment we first assess qualitative factors to determine whether events or circumstances lead to a determination that it is more likely than not that the fair value of any of our reporting units is less than its carrying amount. Our qualitative assessment of the recoverability of goodwill, whether performed annually or based on specific events or circumstances, considers various macroeconomic, industry-specific and company-specific factors. Those factors include: (i) severe adverse industry or economic trends; (ii) significant company-specific actions, including exiting an activity in conjunction with restructuring of operations; (iii) current, historical or projected deterioration of our financial performance; or (iv) a sustained decrease in our market capitalization below our net book value. After assessing the totality of events and circumstances, if we determine that it is not more likely than not that the fair value of any of our reporting units is less than its carrying amount, no further assessment is performed. If we determine that it is more likely than not that the fair value of any of our reporting units is less than its carrying amount, we calculate the fair value of that reporting unit and compare the fair value to the reporting unit’s net book value.
Determining the fair value of a reporting unit involves the use of significant estimates and assumptions. Our goodwill impairment test uses both the income approach and the market approach to estimate a reporting unit's fair value. The income approach is based on the discounted cash flow method that uses the reporting unit estimates for forecasted future financial performance including revenues, operating expenses, and taxes, as well as working capital and capital asset requirements. These estimates are developed as part of our long-term planning process based on assumed market segment growth rates and our assumed market segment share, estimated costs based on historical data and various internal estimates. Projected cash flows are then discounted to a present value employing a discount rate that properly accounts for the estimated market weighted-average cost of capital, as well as any risk unique to the subject cash flows. The market approach is based on weighting financial multiples of comparable companies and applies a control premium. A reporting unit's carrying value represents the assignment of various assets and liabilities, excluding certain corporate assets and liabilities, such as cash and debt.
We assess the impairment of long-lived assets including purchased in-process research and development, assets, property, plant and equipment, and intangible assets, whenever events or changes in circumstances indicate that the carrying value of such assets may not be recoverable. Factors we consider important which could trigger an impairment review include (i) significant under-performance relative to historical or projected future operating results, (ii) significant changes in the manner of our use of the acquired assets or the strategy for our overall business, or (iii) significant negative industry or economic trends. The process of evaluating the potential impairment of long-lived assets under the accounting guidance on property, plant and equipment and other intangible assets is also highly subjective and requires significant judgment. In order to estimate the fair value of long-lived assets, we typically make various assumptions about the future prospects about our business or the part of our business that the long-lived asset relates to, consider market factors specific to the business and estimate future cash flows to be generated by the business, which requires significant judgment as it is based on assumptions about market demand for our products over a number of future years. Based on these assumptions and estimates, we determine whether we need to take an impairment charge to reduce the value of the long-lived asset stated on our consolidated balance sheet to reflect its estimated fair value. Assumptions and estimates about future values and remaining useful lives are complex and often subjective. They can be affected by a variety of factors, including external factors, such as the real estate market, industry and economic trends, and internal factors, such as changes in our business strategy and our internal forecasts. Although we believe the assumptions and estimates we have made in the past have been reasonable and appropriate, changes in assumptions and estimates could materially impact our reported financial results.

44

Table of Contents

Inventory valuation.  We regularly review inventory quantities on hand and record a provision for excess and obsolete inventory based primarily on our forecast of product demand and production requirements. Demand for our products can fluctuate significantly from period to period. A significant decrease in demand could result in an increase in the amount of excess inventory quantities on hand. In addition, our industry is characterized by rapid technological change, frequent new product development and rapid product obsolescence that could result in an increase in the amount of obsolete inventory quantities on hand. Additionally, our estimates of future product demand may prove to be inaccurate, which may cause us to understate or overstate both the provision required for excess and obsolete inventory and cost of products sold. Therefore, although we make every effort to ensure the accuracy of our forecasts of future product demand, any significant unanticipated changes in demand or technological developments could have a significant impact on the value of our inventory and our results of operations.
Income taxes.  Significant management judgment is required in developing our provision for income taxes, including the determination of deferred tax assets and liabilities and any valuation allowances that might be required against the deferred tax assets. We have considered projected future taxable income and ongoing prudent and feasible tax planning strategies in assessing the need for valuation allowances. If we determine, in the future, that a valuation allowance is required, such adjustment to the deferred tax assets would increase our tax expense in the period in which such determination is made. Conversely, if we determine, in the future, a valuation allowance exceeds our requirement, such adjustment to the deferred tax assets would decrease tax expense in the period in which such determination is made. In evaluating the exposure associated with various tax filing positions, we accrue an income tax liability when such positions do not meet the more-likely-than-not threshold for recognition.
The calculation of our tax liabilities involves dealing with uncertainties in the application of complex tax law and regulations in a multitude of jurisdictions. We recognize potential liabilities for anticipated tax audit issues in Singapore and other tax jurisdictions based on our estimate of whether, and the extent to which, additional taxes and interest will be due. If our estimate of income tax liabilities proves to be less than the actual amount ultimately assessed, a further charge to tax expense would be required. If the payment of these amounts ultimately proves to be unnecessary, the reversal of the accrued liabilities would result in tax benefits being recognized in the period when we determine the liabilities no longer exist.
Retirement and post-retirement benefit plan assumptions.  Retirement and post-retirement benefit plan costs are a significant cost of doing business. They represent obligations that will ultimately be settled sometime in the future and therefore are subject to estimation. Pension accounting is intended to reflect the recognition of future retirement and post-retirement benefit plan costs over the employees' average expected future service to us, based on the terms of the plans and investment and funding decisions. To estimate the impact of these future payments and our decisions concerning funding of these obligations, we are required to make assumptions using actuarial concepts within the framework of GAAP. One critical assumption is the discount rate used to calculate the estimated costs. Other important assumptions include the expected long-term return on plan assets, the health care cost trend rate, expected future salary increases, expected future increases to benefit payments, expected retirement dates, employee turnover, retiree mortality rates, and portfolio composition. We evaluate these assumptions at least annually.
The discount rate is used to determine the present value of future benefit payments at the relevant measurement dates — October 29, 2017 and October 30, 2016, for both U.S. and non-U.S. plans, in fiscal years 2017 and 2016, respectively. For fiscal years 2017 and 2016, the U.S. discount rates were based on the results of matching expected plan benefit payments with cash flows from a hypothetical yield curve constructed with high-quality corporate bond yields. The discount rate for non-U.S. plans was based either on published rates for government bonds or use of a hypothetical yield curve constructed with high- quality corporate bond yields, depending on the availability of sufficient quantities of quality corporate bonds. Lower discount rates increase present values of the pension liabilities and subsequent year pension expense; higher discount rates decrease present values of the pension liabilities and subsequent year pension expense.
We base our salary increase assumptions on historical experience and future expectations. In developing the expected rate of return, we consider long-term compound annualized returns based on historical market data, historical and expected returns on the various categories of plan assets, and the target investment portfolio allocation among debt, equity securities and other investments.
Actuarial assumptions are based on our best estimates and judgment. Material changes may occur in retirement benefit costs in the future if these assumptions differ from actual events or experience. We performed a sensitivity analysis on the discount rate, which is the key assumption in calculating U.S. pension and post-retirement benefit obligations as of October 29, 2017. Each change of 25 basis points in the discount rate assumption would have had an estimated $41 million impact on the benefit obligations as of October 29, 2017. Each change of 25 basis points in the discount rate assumption and expected rate of return assumption would have an estimated change of $1 million and $4 million, respectively, on annual net retirement benefit costs for fiscal year 2018.

45

Table of Contents

Share-based compensation expense.  Share-based compensation expense consists of expense for share options and RSUs granted to employees and non-employees or assumed from acquisitions as well as expense associated with Broadcom employee share purchase plan, or ESPP. We recognize compensation expense for time-based options and ESPP rights based on the estimated grant-date fair value method required under the authoritative guidance using the Black-Scholes valuation model.
Certain equity awards include both time-based and market-based conditions and are accounted for as market-based awards. The fair value of these market-based awards is estimated on the date of grant using a Monte Carlo simulation model. Assumptions utilized in the Monte Carlo simulation model follow the same methodology as our time-based option awards.
Employee Bonus Programs. Our employee bonus programs, which are overseen by our Compensation Committee or our Board, in the case of our Chief Executive Officer, provide for variable compensation based on the attainment of overall corporate annual targets and functional performance metrics. In the first fiscal quarter of the year, if management determines that it is probable that the targets and metrics will be achieved and the amounts can be reasonably estimated, a variable, proportional compensation accrual is recognized based on an assumed 100% achievement of the targets and metrics. The bonus payout levels can be greater if attainment of metrics and targets is greater than 100% and a portion of the payouts may not occur if a minimum floor of performance is not achieved. In subsequent quarters, we monitor and accrue for variable compensation expense based on our actual progress toward the achievement of the annual targets and metrics. The actual achievement of target metrics at the end of the fiscal year, which is subject to approval by our Compensation Committee, may result in the actual variable compensation amounts being significantly higher or lower than the relevant estimated amounts accrued in earlier quarters, which would result in a corresponding adjustment in the fourth fiscal quarter.
Fiscal Year Presentation
We operate on a 52- or 53-week fiscal year ending on the Sunday closest to October 31 in a 52-week year and the first Sunday in November in a 53-week year. Each of fiscal years 2017, 2016 and 2015 consisted of 52 weeks.
The financial statements included in Part II, Item 8. of this Annual Report on Form 10-K are presented in accordance with GAAP and expressed in U.S. dollars.


46

Table of Contents

Results of Operations
Fiscal Year 2017 Compared to Fiscal Year 2016
 
 
Fiscal Year Ended
 
 
October 29,
2017
 
October 30,
2016
 
October 29,
2017
 
October 30,
2016
 
 
 
 
 
 
 
 
 
 
 
(In millions)
 
(As a percentage of net revenue)
Statements of Operations Data:
 
 
 
 
 
 
 
 
Net revenue
 
$
17,636

 
$
13,240

 
100
%
 
100
 %
Cost of products sold:
 
 
 
 
 
 
 
 
Cost of products sold
 
6,593

 
5,295

 
38

 
40

Purchase accounting effect on inventory
 
4

 
1,185

 

 
9

Amortization of acquisition-related intangible assets
 
2,511

 
763

 
14

 
6

Restructuring charges
 
19

 
57

 

 

Total cost of products sold
 
9,127

 
7,300

 
52

 
55

Gross margin
 
8,509

 
5,940

 
48

 
45

Research and development
 
3,292

 
2,674

 
19

 
20

Selling, general and administrative
 
787

 
806

 
4

 
6

Amortization of acquisition-related intangible assets
 
1,764

 
1,873

 
10

 
14

Restructuring, impairment and disposal charges
 
161

 
996

 
1

 
8

Litigation settlements
 
122

 

 
1

 

Total operating expenses
 
6,126

 
6,349

 
35

 
48

Operating income (loss)
 
$
2,383

 
$
(409
)
 
13
%
 
(3
)%
Net Revenue
 
 
Fiscal Year Ended
 
 
 
 
Net Revenue by segment
 
October 29,
2017
 
October 30,
2016
 
$ Change
 
% Change
 
 
 
 
 
 
 
 
 
 
 
(In millions, except for percentages)
Wired infrastructure
 
$
8,549

 
$
6,582

 
$
1,967

 
30
%
Wireless communications
 
5,404

 
3,724

 
1,680

 
45
%
Enterprise storage
 
2,799

 
2,291

 
508

 
22
%
Industrial & other
 
884

 
643

 
241

 
37
%
Total net revenue
 
$
17,636

 
$
13,240

 
$
4,396

 
33
%
 
 
Fiscal Year Ended
Net Revenue by segment
 
October 29, 2017
 
October 30, 2016
 
 
 
 
 
 
 
(As a percentage of net revenue)
Wired infrastructure
 
48
%
 
50
%
Wireless communications
 
31

 
28

Enterprise storage
 
16

 
17

Industrial & other
 
5

 
5

Total net revenue
 
100
%
 
100
%
Our total net revenue increased primarily due to the full year contribution from acquired BRCM products in fiscal year 2017 compared to only three quarters in fiscal year 2016, as well as due to strong organic year-over-year growth.
Net revenue from our wired infrastructure segment increased primarily due to the full year contribution from acquired BRCM products, as well as strong organic year-over-year growth. Net revenue from our wireless communications segment increased primarily due to an increase in our wireless content in handsets, as well as the full year contribution from acquired BRCM products. Net revenue from our enterprise storage segment increased primarily due to strength in demand for our hard

47

Table of Contents

disk drive, or HDD, products, as well as increased demand for our custom solid state drive, or SSD, controller, and server storage and connectivity products. The demand for our HDD products was higher in fiscal year 2017 than in fiscal year 2016 due to shortages in the SSD supply chain during fiscal year 2017.
Gross Margin
Gross margin increased by $2,569 million in fiscal year 2017. Gross margin as a percentage of net revenue increased to 48% in fiscal year 2017 from 45% for fiscal year 2016. These increases were primarily attributable to a $1,181 million reduction in acquisition purchase accounting effect on inventory, as well as a more favorable product mix, partially offset by a $1,748 million increase in amortization of acquisition-related intangible assets resulting from the Broadcom Merger. The 33% increase in net revenue was the primary reason for the increase in gross margin dollars. We expect to incur additional amortization of acquisition-related intangible assets in future periods as a result of the Brocade Merger which closed on November 17, 2017, and any further acquisitions.
Research and Development Expense
Research and development expense increased $618 million, or 23%, in fiscal year 2017. Research and development expense remained relatively flat as a percentage of net revenue at 19% and 20% for fiscal years 2017 and 2016, respectively. The increase in research and development expense dollars for fiscal year 2017 was primarily due to a full year of expense resulting from the acquired BRCM businesses and higher share-based compensation expense, partially offset by benefits from restructuring actions that we initiated following the Broadcom Merger. Share-based compensation expense was higher in fiscal year 2017 due to equity awards granted to employees from the acquired BRCM businesses, as well as annual employee equity awards granted at higher grant-date fair values.
Selling, General and Administrative Expense
Selling, general and administrative expense decreased $19 million, or 2%, in fiscal year 2017. Selling, general and administrative expense as a percentage of net revenue was 4% and 6% for fiscal years 2017 and 2016, respectively. The decrease in selling, general and administrative expense dollars for fiscal year 2017 was primarily due to a decrease in acquisition-related costs and benefits from restructuring actions that we initiated following the Broadcom Merger, partially offset by higher share-based compensation expense. Share-based compensation expense was higher in fiscal year 2017 due to annual employee equity awards granted at higher grant-date fair values.
Amortization of Acquisition-Related Intangible Assets
Amortization of acquisition-related intangible assets recognized in operating expenses decreased $109 million, or 6%, in fiscal year 2017, due to a decrease in amortization of intangible assets acquired in the Broadcom Merger. We expect to incur additional amortization of acquisition-related intangible assets in future periods as a result of the Brocade Merger.
Restructuring, Impairment and Disposal Charges
Restructuring, impairment and disposal charges included in operating expenses decreased $835 million, or 84%, in fiscal year 2017 compared to fiscal year 2016 primarily due to a decrease in the impairment of in-process research and development projects. The decrease was also due to lower employee termination costs as the majority of restructuring activities resulting from the Broadcom Merger were undertaken in fiscal year 2016. We expect to incur additional restructuring charges in future periods as a result of the Brocade Merger.
Litigation Settlements
During fiscal year 2017, we incurred $122 million of litigation charges associated with certain legal settlement agreements.

48

Table of Contents

Segment Operating Results
 
 
Fiscal Year Ended
 
 
 
 
Operating Income (Loss)
 
October 29, 2017
 
October 30, 2016
 
$ Change
 
% Change
 
 
 
 
 
 
 
 
 
 
 
(In millions, except for percentages)
Wired infrastructure
 
$
3,853

 
$
2,664

 
$
1,189

 
45
 %
Wireless communications
 
2,155

 
1,282

 
873

 
68
 %
Enterprise storage
 
1,527

 
995

 
532

 
53
 %
Industrial & other
 
447

 
327

 
120

 
37
 %
Unallocated expenses
 
(5,599
)
 
(5,677
)
 
78

 
(1
)%
Total operating income (loss)
 
$
2,383

 
$
(409
)
 
$
2,792

 
683
 %
Operating income from our wired infrastructure segment increased primarily due to a full year of revenue contributions from acquired BRCM products, as well as due to strong organic year-over-year growth, partially offset by a full year of research and development expense related to the acquired BRCM businesses. Operating income from our wireless communications segment increased primarily due to an increase in our wireless content in handsets, as well as the full year contribution from acquired BRCM products. These increases were partially offset by a full year of research and development expense related to the acquired BRCM businesses. Operating income from our enterprise storage segment increased primarily due to strength in demand for our HDD products, as well as increased demand for our custom SSD controller, and server storage connectivity products. We expect contributions from the Brocade SAN business to increase operating income in the enterprise storage segment in future periods. Operating income for the wired infrastructure, wireless communications and enterprise storage segments also benefited from lower operating expenses following our restructuring actions. Operating income from our industrial & other segment increased primarily due to an increase in revenue dollars from our optocoupler products and licensing of intellectual property, or IP, partially offset by an increase in legal expense.
Unallocated expenses include amortization of acquisition-related intangible assets, share-based compensation expense, restructuring, impairment and disposal charges, acquisition-related costs, charges for litigation settlement, and other costs that are not used in evaluating the results of, or in allocating resources to, our segments. Unallocated expenses decreased 1% in fiscal year 2017 primarily due to significant reductions in the purchase accounting effect on inventory and restructuring, impairment and disposal charges, partially offset by increases in amortization of acquisition-related intangible assets and charges for litigation settlement. Additionally, share-based compensation was higher in fiscal year 2017 due to equity awards granted to employees from the acquired BRCM businesses, as well as annual employee equity awards granted at higher grant-date fair values. We expect the factors noted above to increase as a result of the Brocade Merger.
Overall, operating income also benefited from reductions in operating expenses related to our restructuring actions following the Broadcom Merger.
Non-Operating Income and Expenses
Interest expense. Interest expense was $454 million and $585 million for fiscal years 2017 and 2016, respectively. Interest expense was higher in fiscal year 2016 due primarily to one-time debt-related expenses associated with the financing of the Broadcom Merger. We expect interest expense to increase in fiscal year 2018 due to the issuance of the October 2017 Senior Notes.
Loss on extinguishment of debt. During fiscal year 2017, we issued the January 2017 Senior Notes to refinance all of the term loans outstanding under the 2016 Credit Agreement. We terminated the 2016 Credit Agreement, and the revolving credit facility thereunder, in connection with the issuance of the October 2017 Senior Notes, the proceeds of which were used to finance the Brocade Merger. As a result, we wrote off $166 million of outstanding debt issuance costs, which were included in loss on extinguishment of debt. During fiscal year 2016, we made prepayments on our term loan borrowings under the 2016 Credit Agreement and, as a result, recognized $123 million of losses on extinguishment of debt.
Other income, net. Other income net was $62 million and $10 million in fiscal years 2017 and 2016, respectively. Other income, net for fiscal year 2017 primarily comprised a gain on disposal of assets and interest income.
Provision for income taxes. Our provisions for income taxes were $35 million and $642 million in fiscal years 2017 and 2016, respectively. The provision for income taxes in fiscal year 2017 was primarily due to an increase in profit before tax and a discrete expense of $76 million resulting from entity reorganizations, partially offset by the recognition of $273 million of excess tax benefits from share-based equity awards that vested or were exercised during fiscal year 2017 and, to a lesser extent, the recognition of previously unrecognized tax benefits primarily as a result of audit settlements.

49

Table of Contents

The income tax provision for fiscal year 2016 was primarily the result of an increase in tax associated with our undistributed earnings, partially offset by income tax benefits from losses from continuing operations and the recognition of previously unrecognized tax benefits as a result of audit settlements.
At the time we completed the Broadcom Merger, in connection with the allocation of the purchase price, we established a deferred tax liability associated with our potential tax liability arising from our planned integration of BRCM’s IP, which was completed in November 2016. Prior to the adoption of the 2017 Tax Reform Act, this tax liability will become payable as earnings resulting from this integration of IP are distributed over time. However, under the 2017 Tax Reform Act, we will be required to recognize all of these earnings in our fiscal year 2018 as a deemed repatriation of foreign earnings, subject to a one-time mandatory deemed repatriation tax.
As a result of these events, the amount of our income taxes payable could vary materially and consume an increasing amount of our cash. In addition, our provision for income taxes in future periods is likely to change as a result of the impact of internal restructurings and reorganizations which could also affect our overall effective tax rate.
Fiscal Year 2016 Compared to Fiscal Year 2015
 
 
Fiscal Year Ended
Statements of Operations Data:
 
October 30, 2016
 
November 1, 2015
 
October 30, 2016
 
November 1, 2015
 
 
 
 
 
 
 
 
 
 
 
(In millions)
 
(As a percentage of net revenue)
Net revenue
 
$
13,240

 
$
6,824

 
100
 %
 
100
%
Cost of products sold:
 
 
 
 

 
 
 
 
Cost of products sold
 
5,295

 
2,750

 
40

 
41

Purchase accounting effect on inventory
 
1,185

 
30

 
9

 

Amortization of acquisition-related intangible assets
 
763

 
484

 
6

 
7

Restructuring charges
 
57

 
7

 

 

Total cost of products sold
 
7,300

 
3,271

 
55

 
48

Gross margin
 
5,940

 
3,553

 
45

 
52

Research and development
 
2,674

 
1,049

 
20

 
15

Selling, general and administrative
 
806

 
486

 
6

 
7

Amortization of acquisition-related intangible assets
 
1,873

 
249

 
14

 
4

Restructuring, impairment and disposal charges
 
996

 
137

 
8

 
2

Total operating expenses
 
6,349

 
1,921

 
48

 
28

Operating income (loss)
 
$
(409
)
 
$
1,632

 
(3
)%
 
24
%
Net Revenue
 
 
Fiscal Year Ended
 
 
 
 
Net Revenue by Segment
 
October 30, 2016
 
November 1, 2015
 
$ Change
 
% Change
 
 
 
 
 
 
 
 
 
 
 
(In millions, except for percentages)
Wired infrastructure
 
$
6,582

 
$
1,479

 
$
5,103

 
345
%
Wireless communications
 
3,724

 
2,536

 
1,188

 
47
%
Enterprise storage
 
2,291

 
2,180

 
111

 
5
%
Industrial & other
 
643

 
629

 
14

 
2
%
Total net revenue
 
$
13,240

 
$
6,824

 
$
6,416

 
94
%

50

Table of Contents

 
 
Fiscal Year Ended
Net Revenue by Segment
 
October 30, 2016
 
November 1, 2015
 
 
 
 
 
 
 
(As a percentage of net revenue)
Wired infrastructure
 
50
%
 
22
%
Wireless communications
 
28

 
37

Enterprise storage
 
17

 
32

Industrial & other
 
5

 
9

Total net revenue
 
100
%
 
100
%
Our overall net revenue increased in fiscal year 2016, compared to fiscal year 2015, primarily due to the contributions from acquired BRCM products since the Acquisition Date. As a result of the Broadcom Merger, our wired infrastructure segment constituted our largest segment.
Net revenue from our wired infrastructure segment increased primarily due to the contributions since the Acquisition Date from acquired BRCM products included in this segment. Net revenue from our wireless communications segment increased primarily due to revenue contributions of approximately $1.8 billion from sales of acquired BRCM wireless connectivity and related products since the Acquisition Date, partially offset by a decrease in sales of approximately $525 million in sales of our radio frequency, or RF, components due to reduced demand from a key North American mobile handset customer. Net revenue from our enterprise storage segment increased primarily due to the additional revenue resulting from a full year of contributions from the Emulex business that we acquired in May 2015, as well as strength in demand for our HDD products, partially offset by a decrease in demand for our server and storage connectivity products. Net revenue from our industrial & other segment remained essentially flat compared to fiscal year 2015. Our net revenue in fiscal year 2016 also included $450 million from development arrangements and sales and licensing of IP, compared to $313 million in fiscal year 2015, which primarily benefited our wired infrastructure and industrial & other segments.
Gross Margin
Gross margin was $5.9 billion for fiscal year 2016 compared to $3.6 billion for fiscal year 2015. The increase in gross margin was primarily due to contributions to our wired infrastructure and wireless communications segments from the BRCM businesses acquired in February 2016. As a percentage of net revenue, gross margin was 45% and 52% for fiscal years 2016 and 2015, respectively. The 7% decrease in gross margin as a percentage of net revenue was largely due to $1.2 billion of costs resulting from the step-up of inventory to fair value and the increase in amortization of acquisition-related intangible assets associated with the Broadcom Merger.
Research and Development Expense
Research and development expense increased $1.6 billion, or 155%, in fiscal year 2016. Research and development expense as a percentage of net revenue was 20% and 15% for fiscal years 2016 and 2015, respectively. The overall increase in research and development expense dollars and as a percentage of net revenue for fiscal year 2016 was primarily due to the acquisition of BRCM. Share-based compensation included in research and development expense increased due to RSUs assumed in connection with, and integration equity awards granted to employees acquired in, the Broadcom Merger, as well as annual employee equity awards granted at higher grant-date fair values.
Selling, General and Administrative Expense
Selling, general and administrative expense increased $320 million, or 66%, in fiscal year 2016. Selling, general and administrative expense as a percentage of net revenue was 6% and 7% for fiscal years 2016 and 2015, respectively. The overall increase in selling, general and administrative expense dollars for fiscal year 2016 was primarily due to the impact of the acquired BRCM businesses and the acquisition-related costs. The decrease as a percentage of revenue was due to the realization of synergies resulting from the integration of BRCM. Share-based compensation included in selling, general and administrative expense increased due to RSUs assumed in connection with, and integration equity awards granted to employees acquired in, the Broadcom Merger, as well as annual employee equity awards granted at higher grant-date fair values.
Amortization of Acquisition-Related Intangible Assets
Total amortization of acquisition-related intangible assets was $2.6 billion for fiscal year 2016, compared to $733 million for fiscal year 2015. The increase in amortization expense in fiscal year 2016 was primarily attributable to an increase in amortizable intangible assets resulting from the Broadcom Merger.

51

Table of Contents

Restructuring, Impairment and Disposal Charges
Restructuring, impairment and disposal charges, recognized primarily in operating expenses, were $1.1 billion for fiscal year 2016 compared to $144 million in fiscal year 2015. The increase was due primarily to the Broadcom Merger, including impairment charges of $417 million for termination of in-process research and development projects and $173 million for property, plant and equipment. Restructuring charges were due primarily to employee termination costs of approximately $418 million, and lease termination and other exit costs of $29 million, primarily resulting from the Broadcom Merger.
Segment Operating Results
 
 
Fiscal Year Ended
 
 
 
 
Operating Income (Loss)
 
October 30, 2016
 
November 1, 2015
 
$ Change
 
% Change
 
 
 
 
 
 
 
 
 
 
 
(In millions, except for percentages)
Wired infrastructure
 
$
2,664

 
$
478

 
$
2,186