Document

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
 
FORM 10-K
 
ý
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 FOR THE FISCAL YEAR ENDED JUNE 30, 2018
OR
¨
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 FOR THE TRANSITION PERIOD FROM                      TO                     .
COMMISSION FILE NUMBER 0-23599
 
MERCURY SYSTEMS, INC.
(Exact name of registrant as specified in its charter)
 
MASSACHUSETTS
04-2741391
(State or other jurisdiction of incorporation or organization)
(I.R.S. Employer Identification No.)
 
 
50 MINUTEMAN ROAD
ANDOVER, MA
01810
(Address of principal executive offices)
(Zip Code)
978-256-1300
(Registrant’s telephone number, including area code)
 
 
SECURITIES REGISTERED PURSUANT TO SECTION 12(b) OF THE
SECURITIES EXCHANGE ACT OF 1934:
Title of Each Class
Name of Each Exchange on Which Registered
Common Stock, Par Value $0.01 Per Share

NASDAQ Global Select Market
SECURITIES REGISTERED PURSUANT TO SECTION 12(g) OF THE
SECURITIES EXCHANGE ACT OF 1934: NONE
 
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ý    No  ¨ 
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes  ¨    No  ý
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ý    No  ¨
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 229.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ý    No  ¨
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company” and "emerging growth company" in Rule 12b-2 of the Exchange Act.
Large accelerated filer  ý  Accelerated filer  ¨  Non-accelerated filer  ¨  Smaller reporting company  ¨
Emerging growth company  ¨
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨
Indicate by check mark whether the registrant is a shell company (as defined by Rule 12b-2 of the Exchange Act).    Yes  ¨    No  ý
The aggregate market value of the Common Stock held by non-affiliates of the registrant was approximately $2.5 billion based upon the closing price of the Common Stock as reported on the Nasdaq Global Select Market on December 29, 2017, the last business day of the registrant’s most recently completed second fiscal quarter.
Shares of Common Stock outstanding as of July 31, 2018: 48,221,418 shares.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the registrant’s definitive Proxy Statement for its 2018 Annual Meeting of Shareholders are incorporated by reference into Part III of this report.
Exhibit Index on Page 88

1


Table of Contents

MERCURY SYSTEMS, INC.
INDEX
 
 
 
PAGE
NUMBER
 
Item 1.
Item 1A.
Item 1B.
Item 2.
Item 3.
Item 4.
Item 4.1.
 
 
 
 
Item 5.
Item 6.
Item 7.
Item 7A.
Item 8.
Item 9.
Item 9A.
Item 9B.
 
 
 
 
Item 10.
Item 11.
Item 12.
Item 13.
Item 14.
 
 
 
 
Item 15.
 
 

2

Table of Contents

PART I
This Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. Actual results could differ materially from those set forth in the forward-looking statements. The reader may find discussions containing such forward-looking statements in the material set forth under "Management's Discussion and Analysis of Financial Conditions and Results of Operations" as well as elsewhere in this Annual Report on Form 10-K. Certain factors that might cause such a difference are discussed in this annual report on Form 10-K, including in the section entitled “Risk Factors.”

When used in this report, the terms “Mercury,” “we,” “our,” “us,” and “the Company” refer to Mercury Systems, Inc. and its consolidated subsidiaries, except where the context otherwise requires or as otherwise indicated. The term “fiscal” with respect to a year refers to the period from July 1 to June 30. For example, fiscal 2018 refers to the period from July 1, 2017 to June 30, 2018.
ITEM 1.
BUSINESS
Our Company
Mercury Systems, Inc. is a leading commercial provider of secure sensor and safety critical mission processing subsystems. Optimized for customer and mission success, our solutions power a wide variety of critical defense and intelligence programs. We are pioneering a next-generation defense electronics business model specifically designed to meet the industry’s current and emerging technology and business needs. We deliver affordable innovative solutions, rapid time-to-value and service and support to our defense prime contractor customers. Our products and solutions have been deployed in more than 300 programs with over 25 different defense prime contractors. Key programs include Aegis, Patriot, Surface Electronic Warfare Improvement Program (“SEWIP”), Gorgon Stare, Predator, F-35, Reaper, F-16 SABR, E2D Hawkeye, Paveway, Filthy Buzzard, PGK, ProVision, P1, and AIDEWS. Our organizational structure allows us to deliver capabilities that combine technology building blocks and deep domain expertise into electronic subsystem solutions primarily for the aerospace and defense sector.
Our technologies and capabilities include secure embedded processing modules and subsystems, mission computers, safety-critical avionics, radio frequency (“RF”) components, multi-function assemblies and subsystems. We utilize leading edge, high performance computing technologies architected by leveraging open standards and open architectures to address highly data-intensive applications that include data signal, sensor and image processing while also addressing the packaging ruggedization and cooling challenges, often referred to as “SWaP” (size, weight, and power), that are common in military applications. We have design, development, and manufacturing capabilities in mission computing, safety-critical avionics and platform management solutions. In addition, we design and manufacture RF, microwave and millimeter wave components and subsystems to meet the needs of the radar, electronic warfare (“EW”), signals intelligence (“SIGINT”) and other high bandwidth communications requirements and applications.
We also provide significant capabilities relating to pre-integrated EW, electronic attack (“EA”) and electronic counter measure (“ECM”) subsystems, SIGINT and electro-optical/infrared (“EO/IR”) processing technologies, and radar environment test and simulation systems. We deploy these solutions on behalf of defense prime contractors and the Department of Defense (“DoD”), leveraging commercially available technologies and solutions (or “building blocks”) from our business and other commercial suppliers. We leverage this technology to design, build and manufacture integrated sensor processing subsystems, often including classified application-specific software and intellectual property (“IP”) for the C4ISR (command, control, communications, computers, intelligence, surveillance and reconnaissance), EW, and ECM markets. We bring significant domain expertise to customers, drawing on over 25 years of experience in processing, radar, EW, SIGINT, and radar environment test and simulation.
Our consolidated revenues, net income, earnings per share ("EPS"), adjusted EPS and adjusted EBITDA for fiscal 2018 were $493.2 million, $40.9 million. $0.86, $1.42 and $115.4 million, respectively. Our consolidated revenues, net income, earnings per share, adjusted EPS and adjusted EBITDA for fiscal 2017 were $408.6 million, $24.9 million, $0.58, $1.15 and $93.9 million, respectively. See the Non-GAAP Financial Measures section of this annual report for a reconciliation of our adjusted EPS and adjusted EBITDA to the most directly comparable GAAP measures.
Our Business Strategy
Our strategy is built around our key strengths as a leading commercial provider of secure sensor and safety critical mission processing subsystems. Optimized for customer and mission success, our solutions power a wide variety of critical defense and intelligence programs. We are pioneering a next-generation defense electronics business model specifically designed to meet the industry’s current and emerging technology needs. By driving this strategy consistently, we are able to help our customers, mostly defense prime contractors, reduce program cost, minimize technical risk, and stay on schedule and on budget. Tactically, we have a reputation of relentless execution on behalf of our customers that supports the successful evolution of our strategy.

3

Table of Contents

We intend to accelerate our strategic direction through continued investment in advanced new products and solutions development in the fields of radio frequency, analog-to-digital and digital to analog conversion, advanced multi- and many-core sensor processing systems including GPUs, embedded security, digital storage, and digital radio frequency memory (“DRFM”) solutions, software defined communications capabilities, and advanced security technologies and capabilities. We leverage our engineering development capabilities including systems integration to accelerate our move to become a commercial outsourcing partner to the large defense prime contractors as they seek the more rapid design, development and delivery of affordable, commercially developed, open sensor processing solutions within the markets we serve. We invest in scalable manufacturing operations in the U.S. to enable rapid, cost-effective deployment of our microelectronics and secure processing solutions to our customers. Our engagement model can help lead to long-term production subsystem revenues that will continue long after the initial services are delivered.
This business model positions us to be paid for non-recurring engineering work we would have previously expensed through our own income statement, to team concurrently with multiple defense prime contractors as they pursue new business with the unique solutions they develop and market to the government, and to engage with our customers much earlier in the design cycle and ahead of our competition. Since July 2015, we have substantially added to our technology portfolio by adding capabilities in embedded security with the acquisitions of Lewis Innovative Technologies ("LIT") and the custom microelectronics, RF and microwave solutions, and embedded security operations of Microsemi Corporation (the “Carve-Out Business”), RF solutions and custom microelectronics solutions with the acquisitions of the Carve-Out Business and Delta Microwave, LLC (“Delta”), mission computing, safety-critical avionics and platform management with the CES Creative Electronic Systems, S.A. (“CES”) and Richland Technologies, LLC ("RTL") acquisitions, and rugged servers, computers and storage systems with the acquisitions of Themis Computer ("Themis") and Germane Systems, LC ("Germane").
Our Solutions and Products
Services
As part of our strategy, we are focusing on being a commercial outsourcing partner to the large defense prime contractors as they seek the more rapid design, development and delivery of affordable, commercially developed, specialized processing solutions within the markets we serve. We deliver subsystem level engineering expertise as well as ongoing systems integration services addressing our strategy to capitalize on the multi-billion dollar subsystem market within the defense embedded electronics market segment.
As the U.S. government mandates more outsourcing and open standards, a major shift is occurring within the defense prime contractor community towards procurement of integrated subsystems that enable quick application level porting through standards-based methodologies. We believe that our core expertise in this area is well aligned to capitalize on this trend. By leveraging our open architecture and high performance modular product set, we provide defense prime contractors with rapid deployment and quick reaction capabilities through our professional services and systems integration offerings. This results in less risk for the defense prime contractors, shortened development cycles, quicker solution deployment and reduced lifecycle costs.
We define service revenues as revenue from activities that are not associated with the design, development, production, or delivery of tangible assets, software or specific capabilities sold by us. Examples of our service revenues include: analyst services and systems engineering support, consulting, maintenance and other support, testing and installation. We combine our product and service revenues into a single class as services revenues do not exceed 10 percent of total revenues.
Software Products
We actively design, market and sell complete software and middleware environments to accelerate development and execution of complex signal and image processing applications on a broad range of heterogeneous, multi-computing platforms. Our software suite is based on open standards and includes heterogeneous processor support with extensive high performance math libraries, multi-computing fabric support, net-centric and system management enabling services, extended operating system services, board support packages and development tools.
Our software is developed using some of the most advanced integrated development environments ("IDE’s"), such as Eclipse, and our work is done on multiple platforms including open source platforms such as Linux. Our software development teams are schooled in the most up-to-date software development methodologies.
Our software and middleware provides customer application-level algorithm portability across rapidly evolving hardware processor types with math and input/output, or I/O, interfaces running at industry leading performance rates. In order to develop, test and integrate software ahead of hardware availability, we have invested in the notion of a Virtual Multi-Computer. The Virtual Multi-Computer model allows for concurrent engineering internally and with customers to accelerate time to deployment, improve quality and reduce development costs. In most cases, these software products are bundled together with broader solutions including hardware and/or services, while in other cases they are licensed separately.

4

Table of Contents

Our multi-computer software packages are marketed and licensed under the MultiCore Plus® registered trademark. These software products are a key differentiator for our systems business and represent only a modest amount of stand-alone revenue. We generally charge a user-based development license fee and bundle software run-time licenses with our hardware. We offer a standards-based software value proposition to our customers and provide this offer through several integrated software packages and service offerings.
Hardware Products
We offer a broad family of products designed to meet the full range of requirements in compute-intensive, signal processing and image processing applications, multi-computer interconnect fabrics, sensor interfaces and command and control functions. To maintain a competitive advantage, we seek to leverage technology investments across multiple product lines and product solutions. We are also influential in the industry-standard organizations associated with our market segments. For example, we started the OpenVPXTM initiative with the goal of providing customers with multi-vendor interoperable hardware built to well-defined system standards. We continue to leverage our embedded high performance processing technologies with our Intel server-class processing products as well as graphics based processor ("GPGPU") products. While this multi-computing and embedded processing technology is one of our core skills, the SWaP constraints that are encountered in connection with the high performance embedded processing applications create unique challenges. For example, to deal with the heat build-up involved in small subsystems, we introduced a key innovation designed to address this challenge. The technology is called Air-Flow-ByTM and it allows previously unattainable levels of processing power within a small footprint by effectively removing heat so the server-class processors can perform at maximum designed power limits. In rugged environments where air is limited, such as high altitude operations, our Liquid-Flow-ByTM technology has been successfully customer tested allowing maximum server-class processor performance in high altitude missions. These innovative cooling techniques for the first time allow full performance server-class processing in rugged environments enabling new and advanced modes of operation that enhance the multi-intelligence, situational awareness and EW capabilities in military platforms.
Our hardware products are typically compute-intensive and require extremely high inter-processor bandwidth and high I/O capacity. These systems often must also meet significant SWaP constraints for use in aircraft, UAVs, ships and other vehicles, and be ruggedized for use in highly demanding use environments. They can be used in both commercial industrial applications, such as transportation, exploration, communications, ground radar air traffic control, and advanced defense and intelligence applications, including space-time adaptive processing, synthetic aperture radar, airborne early warning, command, control, communication and information systems, mission planning, image intelligence and signal intelligence systems. Our products transform the massive streams of digital data created in these applications into usable information in real time. The systems can scale from a few processors to thousands of processors.
We group our products into the following categories:
Components. Components include technology elements typically performing a single, discrete technological function, which when physically combined with other components may be used to create a module or sub-assembly. Examples include but are not limited to power amplifiers and limiters, switches, oscillators, filters, equalizers, digital and analog converters, chips, MMICs (monolithic microwave integrated circuits), and memory and storage devices.
Modules and Sub-assemblies. Modules and sub-assemblies include combinations of multiple functional technology elements and/or components that work together to perform multiple functions but are typically resident on or within a single board or housing. Modules and sub-assemblies may in turn be combined to form an integrated subsystem. Examples of modules and sub-assemblies include but are not limited to embedded processing modules, embedded processing boards, switch fabric boards, high speed input/output boards, digital receiver boards, graphics and video processing and Ethernet and IO (input-output) boards, multi-chip modules, integrated radio frequency and microwave multi-function assemblies, tuners, and transceivers.
Integrated Subsystems. Integrated subsystems include multiple modules and/or sub-assemblies combined with a backplane or similar functional element and software to enable a solution. These are typically but not always integrated within a chassis and with cooling, power and other elements to address various requirements and are also often combined with additional technologies for interaction with other parts of a complete system or platform. Integrated subsystems also include spare and replacement modules and sub-assemblies sold as part of the same program for use in or with integrated subsystems sold by us.
To address the current challenges facing the war fighter, our government and defense prime contractors, we have developed a new product architecture that supports a more dynamic, iterative, spiral development process by leveraging open architecture standards and leading-edge commercial technologies and products. Configured and productized as integrated subsystems, customers can rapidly and cost-effectively port and adapt their applications to changing threats.
Our open architecture is carried throughout our entire Ensemble® product line from the very small form-factor subsystems to the high-end, where ultimate processing power and reliability is of paramount importance to the mission. Our commercially-developed hardware and software product capabilities cover the entire ISR spectrum from acquisition and digitization of the signal,

5

Table of Contents

to processing of the signal, through the exploitation and dissemination of the information. We work continuously to improve our hardware technology with an eye toward optimization of SWaP demands, as outlined above.
Embedded systems security has become a requirement for new and emerging military programs, and our security solutions are a critical differentiator from our traditional competition. Our security solutions, combined with our next-generation secure Intel server-class product line, together with increasingly frequent mandates from the government to secure electronic systems for domestic and foreign military sales, position us well to capitalize on DoD program protection security requirements. In the defense market, examples of our hardware intellectual property include scalable anti-tamper and information assurance products such as EnforcITTM, WhiteboxCRYPTOTM, and CodeSEALTM. In the commercial market, examples of our hardware intellectual property products include our CANGuardTM product, which provides advanced security for the electronic communications and control architectures on a wide variety of automotive vehicles.
Recent Acquisitions
Since 2011 we have successfully acquired ten businesses, successfully completing integration of the earlier acquired business with the integration of the more recent acquisitions progressing well. The seven acquisitions completed since July 1, 2015 are described below.
Acquisition of Lewis Innovative Technologies, Inc.
In December 2015, we acquired LIT. Embedded systems security has become a requirement for new and emerging military programs, and LIT’s security solutions significantly extend our capabilities and leadership in secure embedded computing, a critical differentiator from our traditional competition. LIT’s solutions, combined with our next-generation secure Intel server-class product line, together with increasingly frequent mandates from the government to secure electronic systems for domestic and foreign military sales, position us well to capitalize on DoD program protection security requirements.
Acquisition of the Microsemi Carve-Out Business
In May 2016, we acquired the Carve-Out Business from Microsemi Corporation. The Carve-Out Business is a leader in the design, development, and production of sophisticated electronic subsystems and components for use in high technology products for aerospace and defense markets. The Carve-Out Business’ defense electronics solutions include high-density rugged memory modules, secure solid-state drives, secure GPS receiver modules, high-power RF amplifiers, millimeter-wave modules and subsystems, and specialized software and firmware for embedded security applications. The Carve-Out Business’ customers, which include many significant defense prime contractors, outsource many of their electronic design and manufacturing requirements to the Carve-Out Business as a result of its specialized capabilities in packaging electronics for SWaP constrained environments, its focus on security and the unique requirements of defense applications, and its expertise in RF and microwave technologies. The Carve-Out Business’ products and technologies are used in a variety of defense applications, including missiles and precision-guided munitions, fighter and surveillance aircraft, airport security portals, and advanced electronic systems for radar and EW.
Acquisition of CES Creative Electronic Systems S.A.
In November 2016, we acquired CES. Based in Geneva, Switzerland, CES is a leading provider of embedded solutions for military and aerospace mission critical computing applications. CES specializes in the design, development and manufacture of safety-certifiable product and subsystems solutions including: primary flight control units, flight test computers, mission computers, command and control processors, graphics and video processing and avionics-certified Ethernet and IO. CES has decades of experience designing subsystems deployed in applications certified up to the highest levels of design assurance. CES products and solutions are used on platforms such as aerial refueling tankers and multi-mission aircraft, as well as several types of unmanned platforms.
The addition of CES adds important and complementary capabilities in mission computing, safety-critical avionics and platform management that are in demand from our customers. These new capabilities will also substantially expand our addressable market into commercial aerospace, defense platform management, C4I and mission computing markets that are aligned to our existing market focus. CES also expands our international presence and gives us better access to non-U.S. markets. Like Mercury, CES has exceptional technology, solid engineering talent and strong leadership, so we believe there is an excellent fit strategically, culturally and operationally between the CES business and Mercury.
Acquisition of Delta Microwave, LLC
In April 2017, we acquired Delta. Based in Oxnard, California, Delta is a leading designer and manufacturer of high-value RF, microwave and millimeter wave sub-assemblies and components for the military, aerospace, and space markets.
The acquisition of Delta is an excellent fit for our market and content expansion strategy. Delta’s strengths in high-power, high-frequency active and passive microwave components and sub-assemblies - particularly in GaN solid-state power amplifiers - are driving strong backlog and growth. These new capabilities add scale and breadth to our existing RF, microwave and millimeter wave portfolio, expand our addressable market into satellite communications, datalinks and space launch - markets that are well-

6

Table of Contents

aligned with our existing market focus - and deepen our penetration into our core radar, EW, and precision-guided munitions markets.
Additionally, Delta has a strong position on a number of franchise U.S. and international defense programs such as F-35, Paveway, MALD, and Rivet Joint that complement our presence. Delta has strong relationships with space OEMs, supplying future manned spaceflight missions as well as military and commercial satellite programs, representing a new growth area for Mercury.
Acquisition of Richland Technologies L.L.C.
In July 2017, we acquired RTL. Based in Duluth, Georgia, RTL specializes in safety-critical and high integrity systems, software, and hardware development as well as safety-certification services for mission-critical applications. In addition, RTL is a leader in safety-certifiable embedded graphics software for commercial and military aerospace applications. The acquisition complements our acquisition of CES in November 2016 by providing additional capabilities in safety-critical markets as well as the opportunity to leverage RTL's U.S. presence and expertise. Together, the RTL and CES acquisitions position us uniquely as a leading provider of secure and safety-critical processing subsystems for aerospace and defense customers.
We gained a European footprint in safety-critical avionics with the acquisition of CES. The combination of RTL with CES strengthens our U.S. presence in the safety-critical avionics market, adding significant systems engineering, safety-critical software and hardware development and certification expertise to our existing mission computing portfolio. These new capabilities enhance our market penetration in commercial aerospace, defense platform management, C4I and mission computing - markets that are very closely aligned with our existing market focus.
Acquisitions of Themis Computer and Germane Systems, LC
In February 2018, we acquired Themis. Based in Fremont, California, Themis is a leading designer, manufacturer and integrator of commercial, SWaP-optimized rugged servers, computers and storage systems for U.S. and international markets.
In July 2018, we acquired Germane. Based in Chantilly, Virginia, Germane is a leading provider of rugged servers for command, control and intelligence ("C2I") applications.
Themis and Germane have a highly complementary market focus and a strategic program portfolio with programs spanning from airborne to ground to undersea. Approximately 80% of Germane programs by revenue are subsurface and airborne while approximately 80% of Themis revenue is surface Navy and ground. With these two acquisitions, we have created a C2I rugged server business of over $100 million in annual revenues with programs across multiple platform domains in less than six months. We intend to drive incremental growth combining the Themis and Germane channels, particularly where the government has authority over compute architecture. With our existing processing and embedded security capabilities, we can increase value-add and content expansion opportunities by adding security, storage and other technologies and capabilities to the Themis and Germane solution sets, providing the end-customer with options for good, better and best offerings to suit the customer’s processing, security and budget requirements. These two acquisitions further provide us with opportunities to rationalize product portfolio and costs in order to optimize operations, improve competitiveness and achieve cost synergies.
Our Market Opportunity
Our market opportunity is defined by the growing demand for domestically designed and manufactured secure sensor and safety critical mission processing capabilities for critical aerospace, defense and intelligence applications. Historically, our primary market has been centered on bringing commercially available technologies to the defense sector, specifically C4I systems, sensor processing and EW systems; and commercial markets, which include commercial aerospace communications and other commercial computing applications. We believe we are well-positioned in growing, sustainable market segments of the defense sector that rely on advanced technologies to improve warfighter capability and provide enhanced force protection capabilities. The acquisitions of the Carve-Out Business and Delta further improved our ability to compete successfully in these market segments by allowing us to offer an even more comprehensive set of closely related capabilities. The CES and RTL acquisitions provided us new capabilities that substantially expand our addressable market into commercial aerospace, defense platform management and mission computing markets that are aligned to our existing market focus. The additions of Themis and Germane provide us with new capabilities and position us with a significant footprint within the C2I rugged server business.
We believe there are a number of evolving trends that are reshaping our target markets and accordingly provide us with attractive growth opportunities. These trends include:
The aerospace and defense electronics market is expected to grow in 2018 and beyond. According to Renaissance Strategic Advisors (“RSA”), the global aerospace and defense electronics market is estimated to be $103 billion in 2018, growing to $117 billion by 2022. Within this global market, RSA estimates that the U.S. defense electronics market will be approximately $51 billion in 2018, growing to $57 billion in 2022. Within the context of the overall U.S. defense budget and spending for defense electronics specifically, we believe the ISR, EW, guided missiles and precision munitions, and ballistic missile defense market segments have a high priority for future DoD spending. We continue to build on our strengths in the design and development of performance optimized electronic subsystems for these markets, and often

7

Table of Contents

team with multiple defense prime contractors as they bid for projects, thereby increasing our chance of a successful outcome.
The rapidly expanding demand for tactical ISR is leading to significant growth in sensor data being generated, leading to even greater demand for the capability of our products to securely store and process data onboard platforms. An increase in the prevalence and resolution of ISR sensors is generating significant growth in the associated data that needs to be stored and turned into information for the warfighter in a timely manner. In addition, several factors are driving the defense and intelligence industries to demand greater capability to collect, store, and process data onboard the aircraft, UAVs, ships and other vehicles, which we refer to collectively as platforms. These factors include the limited communications bandwidth of existing platforms, the need for platforms that can operate more autonomously and possibly in denied communications environments, the need for platforms with increased persistence to enable them to remain in or fly above the battlefield for extended periods, and the need for greater onboard processing capabilities.
Rogue nations’ missile programs and threats from peer nations are causing greater investment in advanced new radar, EW and ballistic missile defense capabilities. There are a number of new and emerging threats, such as peer nations developing stealth technologies, including stealth aircraft, new anti-ship ballistic missiles that potentially threaten the U.S. naval fleet, and a variety of other advanced missile capabilities. Additionally, U.S. armed forces require enhanced signals intelligence and jamming capabilities. In response to these emerging threats, we have participated in key DoD programs, including Aegis, Patriot, SEWIP, a large ground-based radar, F-22 Raptor, F-35 Joint Strike Fighter and upgrade programs for the F-15 and F-16.
The long-term DoD budget pressure is pushing more dollars toward upgrades of the electronic subsystems on existing platforms, which may increase demand for our products. The DoD is moving from major new weapons systems developments to upgrades of the electronic subsystems on existing platforms. These upgrades are expected to include more sensors, signal processing, ISR algorithms, multi-intelligence fusion and exploitation, computing and communications. We believe that upgrades to provide new urgent war fighting capability, driven by combatant commanders, are occurring more rapidly than traditional defense prime contractors can easily react to. We believe these trends will cause defense prime contractors to increasingly seek out our high-performance, cost-effective open architecture products.
Defense procurement reform is causing the defense prime contractors to outsource more work to commercial companies. RSA estimates that in 2018 the U.S. defense tier 2 embedded computing and RF market addressable by suppliers such as Mercury is approximately $16 billion. RSA estimates that the U.S. defense prime contractors currently outsource only a small percentage of their work. On a global basis the tier 2 embedded computing and RF market in 2018 is estimated by RSA to be $32 billion. The U.S. government is intensely focused on making systems more affordable and shortening their development time. As a company that provides commercial items to the defense industry, we believe our products and subsystem solutions are often more affordable than solutions with the same functionality developed by a defense prime contractor. Several factors are providing incentives for defense prime contractors to outsource more work to subcontractors with significant expertise and cost-effective technology capabilities and solutions, and we have transformed our business model over the last several years to address these long-term outsourcing trends and other needs.
DoD security and program protection requirements are creating new opportunities for our advanced secure processing capabilities. The government is focused on ensuring that the U.S. military protects its defense electronic systems and the information held within them from nefarious activities such as tampering, reverse engineering, and other forms of advanced attacks, including cyber. The requirement to add security comes at a time when the commercial technology world continues to offshore more of the design, development, manufacturing, and support of such capabilities, making it more difficult to protect against embedded vulnerabilities, tampering, reverse engineering and other undesired activities. The DoD has a mandate to ensure both the provenance and integrity of the technology and its associated supply chain. These factors have created a unique opportunity for us to expand beyond sensor processing into the provision of advanced secure processing subsystems and capabilities for other on-board critical computing applications designed, developed, manufactured, and supported in the U.S.A. In addition, advanced systems sold to foreign military buyers also require protection so that the technologies, techniques and data associated with them do not become more widely available, which further enhances our market opportunity.
Our Competitive Strengths
We believe the following competitive strengths will allow us to take advantage of the evolving trends in our industry and successfully pursue our business strategy:
Subsystem Solutions Provider for the C4ISR and EW Markets. Through our commercially developed, specialized processing subsystem solutions, we address the challenges associated with the collection and processing of massive, continuous streams of data and dramatically shorten the time that it takes to give information to U.S. armed forces at the tactical edge. Our solutions are specifically designed for flexibility and interoperability, allowing our products to be easily

8

Table of Contents

integrated into larger system-level solutions. Our ability to integrate subsystem-level capabilities allows us to provide solutions that most effectively address the mission-critical challenges within the C4ISR market, including multi-intelligence data fusion and intelligence processing onboard the platform. We leverage our deep expertise in embedded multicomputing, embedded sensor processing, with the addition of our RF microwave and millimeter subsystems and components, along with strategic investments in research and development to provide solutions across the sensor processing chain.
Our deep domain knowledge within our company rounds out our capabilities and services to our prime contractor and DoD customers. The acquisitions of the Carve-Out Business and Delta further improved our ability to compete successfully in these market segments by allowing us to offer an even more comprehensive set of closely related capabilities. The CES and RTL acquisitions provided us new capabilities that substantially expand our addressable market into commercial aerospace, defense platform management and mission computing markets that are aligned to our existing market focus. The additions of Themis and Germane provide us with new capabilities and position us with a significant footprint within the C2I rugged server business.
Diverse Mix of Stable, Growth Programs Aligned with DoD Funding Priorities. Our products and solutions have been deployed on more than 300 different programs and over 25 different defense prime contractors. We serve high priority markets for the DoD and foreign militaries, such as UAVs, ballistic missile defense, guided missiles and precision munitions, airborne reconnaissance, EW, and have secured positions on mission-critical programs including Aegis, Predator and Reaper UAVs, F-35 Joint Strike Fighter, Patriot missile, SEWIP, and Paveway. In addition, we consistently leverage our technology and capabilities across multiple programs, providing significant operating leverage and cost savings. Our recent acquisitions allow us to participate in a broader array of programs, many with customers that are already key strategic customers of ours.
We are a leading commercial provider of secure processing subsystems designed and made in the U.S.A. We have a portfolio of open standards architecture (“OSA”) technology building blocks across the entire sensor processing chain. We offer embedded secure processing capabilities with advanced packaging and cooling technologies that ruggedize commercial technologies while allowing them to stay cool for reliable operation. These capabilities allow us to help our customers meet the demanding SWaP requirements of today’s defense platforms. Our pre-integrated subsystems improve affordability by substantially reducing customer system integration costs and time-to-market for our solutions. System integration costs are one of the more substantial costs our customers bear in developing and deploying technologies in defense programs and platforms. Our pre-integrated solutions approach allows for more rapid and affordable modernization of existing platforms and faster deployment of new platforms.
Our strengths in this area include our position as an early and leading advocate for OSA in defense, offering Intel server class processing form factors across 3/6U OpenVPX, ATCA and rack-mount architectures, and high density, secure solutions across multiple hardware architectures to seamlessly scale to meet our customers’ SWaP requirements. In addition, we have a 30-year legacy of system management and system integration expertise that allows us to reduce technical risk, while improving affordability and interoperability. Our system integration expertise is a cornerstone in helping us support our customers in deploying pre-integrated, OSA subsystems.
We provide advanced, integrated security features for our products and subsystems, addressing an increasingly prevalent requirement for DoD program security. We offer secure processing expertise that is built-in to our pre-integrated subsystems, not bolted on. By doing this we are able to provide secure building blocks that allow our customers to also incorporate their own security capabilities. This assists our customers in ensuring program protection as they deploy critical platforms and programs, all in support of DoD missions. The Carve-Out Acquisition brought us new security technologies and also allowed us to provide enhanced security capabilities in areas such as memory and storage devices. The Carve-Out Acquisition also provided us with a DMEA (“Defense Micro-Electronics Association”) certified trusted manufacturing facility for microelectronics in our Phoenix, Arizona facility.
We are pioneering a next generation business model. The DoD and the defense industrial base is currently undergoing a major transformation. Domestic political and budget uncertainty, geopolitical instability and evolving global threats have become constants. The defense budget, while stabilized in the short term, remains under pressure and R&D and technology spending are often in budgetary competition with the increasing costs of military personnel requirements, health care costs, and other important elements within the DoD and the federal budget generally. Finally, defense acquisition reform calls for the continued drive for innovation and competition within the defense industrial base, while also driving down acquisition costs. Our approach is built around a few key pillars:
We continue to leverage our expertise in building pre-integrated subsystems in support of critical defense programs, driving out procurement costs by lowering integration expenses of our customers.
We have been a pioneer in driving OSA for both embedded computing and RF.
The DoD has asked defense industry participants to invest their own resources into R&D. This approach is a pillar of our business model.

9

Table of Contents

Security and program protection are now critical considerations for both program modernizations as well as for new program deployment. We are now in our third generation of building secure embedded processing solutions.
We have a next generation business model built to meet the emerging needs of the DoD.
Value-Added Subsystem Solution Provider for Defense Prime Contractors. Because of the DoD’s continuing shift toward a firm fixed price contract procurement model, an increasingly uncertain budgetary and procurement environment, and increased budget pressures from both the U.S. and allied governments, defense prime contractors are accelerating their move toward outsourcing opportunities to help mitigate the increased program and financial risk. Our differentiated secure sensor and safety-critical processing solutions offer meaningful capabilities upgrades for our customers and enable the rapid, cost-effective deployment of systems to the end customer. We believe our open architecture subsystems offer differentiated sensor processing and data analytics capabilities that cannot be easily replicated. Our solutions minimize program risk, maximize application portability, and accelerate customers’ time to market, all within a fixed-pricing contracting environment.
Delivery of Platform-Ready Solutions for Classified Programs. We believe our integration work through our Cypress, California facility provides us with critical insights as we implement and incorporate key classified government intellectual property, including critical intelligence and signal processing algorithms, into advanced systems. This integration work provides us the opportunity to combine directly and integrate our technology building blocks along with our intellectual property into our existing embedded processing products and solutions, enabling us to deliver more affordable, platform-ready integrated ISR subsystems that leverage our OSA and address key government technology and procurement concerns. Our operations in this environment also help us identify emerging needs and opportunities to influence our future product development, so that critical future needs can be met in a timely manner with commercially-developed products and solutions.
Advanced Microelectronics Centers. Our Advanced Microelectronics Centers (“AMCs”) in Hudson, New Hampshire and West Caldwell, New Jersey, design, build and test RF components and subsystems in support of a variety of key customer programs. With our fiscal 2014 move into our new AMC in Hudson, New Hampshire, including the installation of integrated business systems into both our AMCs, we have a platform for scalable, continued growth in our RF product lines. Our scalable microelectronics manufacturing operations at our AMCs enable rapid, cost-effective deployment of RF solutions to our customers. The acquisitions of the Carve-Out Business and Delta have provided us with west coast RF manufacturing locations providing similar advanced capabilities and better proximity to certain key customer locations.
United States Manufacturing Operations. Our United States Manufacturing Operations (“USMO”) in Phoenix, Arizona is built around scalable, repeatable, secure, affordable, and predictable manufacturing. The facility is a DMEA certified secure trusted site, certified to AS9100 quality standards and it utilizes Lean Six Sigma methodologies throughout manufacturing. The USMO is designed for efficient manufacture, enabling our customers to access the best proven technology and high performing, secure processing solutions. This allows for the most repeatable product performance, while optimizing affordability and production responsiveness.
Long-Standing Industry Relationships. We have established long-standing relationships with defense prime contractors, the U.S. government and other key organizations in the defense industry over our 30 years in the defense electronics industry. Our customers include Airbus, BAE Systems, Boeing, Harris, L3 Technologies, Leonardo, Lockheed Martin, Northrop Grumman, and Raytheon. Over this period, we have become recognized for our ability to develop new technologies and meet stringent program requirements. We believe we are well-positioned to maintain these high-level customer engagements and enhance them through the additional relationships that our recently acquired businesses have with many of the same customers.
Proven Management Team. Over the past several years, our senior management team has refocused the Company on its economic core, developed a long-term compelling strategy for the defense markets and restored profitability to the business. Our senior management team has a history of identifying and evaluating successful business acquisition opportunities, performing in-depth due diligence, negotiating with owners and management, structuring, financing, and closing transactions and then integrating the acquired business resulting in the creation of synergies and enhanced overall returns. Having completed these critical steps to rebuild the Company and with a senior management team with significant experience in growing, scaling and acquiring businesses, we believe that we have demonstrated our operational capabilities and we are well-positioned to continue growing and scaling our business.
Competition
We operate in a highly competitive marketplace characterized by rapidly changing technology, frequent product performance improvements, increasing speed of deployment to align with warfighters’ needs, and evolving industry standards and requirements coming from our customers or the DoD. Competition typically occurs at the design stage of a prospective customer’s product, where the customer evaluates alternative technologies and design approaches. We work with defense prime contractors as well as directly with the DoD. We help drive subsystem development and deployment in both classified and unclassified environments.

10

Table of Contents

The principal competitive factors in our market are price/performance value proposition, available new products at the time of design win engagement, services and systems integration capability, effective marketing and sales efforts, and reputation in the market. Our competitive strengths include rapid, innovative engineering in both hardware and software products, subsystem design expertise, advanced packaging capability to deliver the most optimized SWaP solution possible, our ability to respond rapidly to varied customer requirements, and a track record of successfully supporting many high profile programs in the defense market. There are a limited number of competitors across the market segments and application types in which we compete. Some of these competitors are larger and have greater resources than us. Some of these competitors compete against us at purely a component or board-level, others at a subsystem level. We also compete with in-house design teams at our customers. The DoD as well as the defense prime contractors are pushing for more outsourcing of subsystem designs to mitigate risk and to enable concurrent design of the platform which ultimately leads to faster time to deployment. We have aligned our strategy to capitalize on that trend and are leveraging our long standing subsystem expertise to provide this value to our customers.
Research and Product Development
Our research and development efforts are focused on developing new products and systems as well as enhancing existing hardware and software products in mission, signal and image processing. Our research and development goal is to fully exploit and maintain our technological lead in the high-performance, real-time sensor processing industry and in mission computing, platform management and other safety-critical applications. Expenditures for research and development amounted to $58.8 million, $54.1 million, and $36.4 million in fiscal 2018, 2017, and 2016, respectively. As of June 30, 2018, we had 446 employees, including hardware and software architects and design engineers, primarily engaged in engineering and research and product development activities. These individuals, in conjunction with our sales team, also devote a portion of their time to assisting customers in utilizing our products, developing new uses for these products and anticipating customer requirements for new products.
Manufacturing
The majority of our sales are produced in AS9100 quality system certified facilities. The current scope of delivered hardware products includes commercial and industrial class printed circuit board assemblies (modules), complex chassis subsystems, and RF and microwave components and subsystems.
Our Phoenix, Arizona facility manufactures our custom microelectronics products in an AS9100 quality system certified facility. This is a DMEA certified trusted manufacturing facility and is primarily focused on advanced secure system-on-chip design, assembly, packaging, and test. Our Oxnard and Camarillo, California facilities manufacture radio frequency and microwave products in AS9100 quality system certified facilities. Our Cypress, California, West Lafayette, Indiana, and Huntsville, Alabama facilities are AS9100 quality systems certified facilities as well. Our Freemont, California facility is ISO 9001:2015 quality systems certified. Our Chantilly, Virginia facility is AS9100 quality systems certified. Our Andover, Massachusetts and Hudson, New Hampshire facilities design and assemble our processing products and are AS9100 quality systems certified facilities. Our Andover, Massachusetts facility is also a DMEA certified trusted design facility and is primarily focused on advanced security features for the processing product line.
We rely on both vertical integration and subcontracting to contract manufacturers to meet our manufacturing needs. Our USMO has the manufacturing capabilities to complete the assembly and testing for certain of our embedded multi-computing products. We subcontract a portion of the assembly and testing for our other embedded multi-computing products to contract manufacturers in the U.S. to build to our specifications. Our printed circuit board assemblies and chassis subsystems' manufacturing operations also consist of materials planning and procurement, final assembly and test and logistics (inventory and traffic management). Our vertically integrated subsystem product solutions rely on strong relationships with strategic suppliers to ensure on-time delivery and high quality products. We manage supplier performance and capability through quality audits and stringent source, incoming and/or first article inspection processes. We have a comprehensive quality and process control plan for each of our products, which include an effective supply chain management program and the use of automated inspection and test equipment to assure the quality and reliability of our products. We perform most post sales service obligations (both warranty and other lifecycle support) in-house through a dedicated service and repair operation. We periodically review our contract manufacturing capabilities to ensure we are optimized for the right mix of quality, affordability, performance and on-time delivery.
Our USMO in Phoenix, Arizona is built around scalable, repeatable, secure, affordable, and predictable manufacturing. The facility is a DMEA certified secure trusted site, certified to AS9100 quality standards and it utilizes Lean Six Sigma methodologies throughout manufacturing. The USMO is designed for efficient manufacture, enabling our customers to access the best proven technology and high performing, secure processing solutions. This allows for the most repeatable product performance, while optimizing affordability and production responsiveness.
We built out a new microelectronics facility in Hudson, New Hampshire that opened during fiscal 2014. This facility consolidated the former microelectronics operations in Salem, New Hampshire and Hudson, New Hampshire as well as the former facilities in Ewing, New Jersey and Monroe, Connecticut. This facility is specifically aimed at providing scalable manufacturing within our critical RF and microwave businesses. We leverage best practices in design, development, manufacturing and materials handling at this facility. The facility is one of our Advanced Microelectronics Centers, which includes our RF/microwave subsystems

11

Table of Contents

group in West Caldwell, New Jersey. The Advanced Microelectronics Centers design, build and test both RF and microwave components and subsystems in support of a variety of key customer programs.
Although we generally use standard parts and components for our products, certain components, including custom designed ASICs, static random access memory, FPGAs, microprocessors and other third-party chassis peripherals (single board computers, power supplies, blowers, etc.), are currently available only from a single source or from limited sources. With the exception of certain components that have gone “end of life”, we strive to maintain minimal supply commitments from our vendors and generally purchase components on a purchase order basis as opposed to entering into long-term procurement agreements with vendors. We have generally been able to obtain adequate supplies of components in a timely manner from current vendors or, when necessary to meet production needs, from alternate vendors. We believe that, in most cases, alternate vendors can be identified if current vendors are unable to fulfill needs.
We also design, develop, and manufacture DRFM units for a variety of modern EW applications, as well as radar environment simulation and test systems for defense and intelligence applications. We develop high performance SIGINT payloads and EO/IR technologies for small UAV platforms as well as powerful onboard UAV processor systems for real-time Wide Area Motion Imagery.
Intellectual Property and Proprietary Rights
As of June 30, 2018, we held 72 patents of varying duration issued in the United States. We file U.S. patent applications and, where appropriate, foreign patent applications. We also file continuations to cover both new and improved designs and products. At present, we have several U.S. and foreign patent applications in process.
We also rely on a combination of trade secret, copyright, and trademark laws, as well as contractual agreements, to safeguard our proprietary rights in technology and products. In seeking to limit access to sensitive information to the greatest practical extent, we routinely enter into confidentiality and assignment of invention agreements with each of our employees and consultants and nondisclosure agreements with our key customers and vendors.
Backlog
As of June 30, 2018, we had a backlog of orders aggregating approximately $447.1 million, of which $328.5 million is expected to be delivered within the next twelve months. As of June 30, 2017, backlog was approximately $357.0 million. We include in our backlog customer orders for products and services for which we have accepted signed purchase orders, as long as that order is scheduled to ship or invoice in whole, or in part, within the next 24 months. Orders included in backlog may be canceled or rescheduled by customers, although the customer may incur cancellation penalties depending on the timing of the cancellation. A variety of conditions, both specific to the individual customer and generally affecting the customer’s industry, may cause customers to cancel, reduce or delay orders that were previously made or anticipated. We cannot assure the timely replacement of canceled, delayed or reduced orders. Significant or numerous cancellations, reductions or delays in orders by a customer or group of customers could materially and adversely affect our results of operations or our ability to predict future revenues. Backlog should not be relied upon as indicative of our revenues for any future period.
Employees
At June 30, 2018, we employed a total of 1,320 people excluding contractors, including 446 in research and development, 112 in sales and marketing, 567 in manufacturing and customer support and 195 in general and administrative functions. We have 100 employees located in Europe, seven located in Canada, and one located in Japan, and 1,212 located in the United States. We do not have any employees represented by a labor organization, and we believe that our relations with our employees are good. We also use contractors on an as needed basis.
Customers
Our revenues are concentrated in three defense prime contractors including Lockheed Martin Corporation, Raytheon Company and Northrop Grumman Corporation for the years ended June 30, 2018, 2017 and 2016. These three defense prime contractors comprised an aggregate of 47%, 44% and 51% of our revenues in each of the years ended June 30, 2018, 2017 and 2016, respectively. While sales to each of these customers typically compose 10% or more of our revenue, the sales to these customers are spread across multiple programs and platforms.
Corporate Headquarters and Incorporation
Our corporate headquarters is located in Andover, Massachusetts. In 2017, we relocated our corporate headquarters into a more modern facility in Andover, Massachusetts, investing in communications, media and collaborative capabilities, engineering labs and security infrastructure.
Mercury Systems, Inc. was incorporated in Massachusetts in 1981.

12

Table of Contents

Financial Information about Geographic Scope
Information about revenue we receive within and outside the U.S. can be found in Note P - Operating Segment, Geographic Information and Significant Customers - to the accompanying Consolidated Financial Statements included elsewhere in this Annual Report on Form 10-K.
WEBSITE
We maintain a website at www.mrcy.com. We make available on our website, free of charge, our annual report on Form 10-K, quarterly reports on Form 10-Q, and current reports on Form 8-K, including exhibits and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as soon as reasonably practicable after such reports are electronically filed with, or furnished to, the Securities and Exchange Commission (“SEC”). Our code of business conduct and ethics is also available on our website. We intend to disclose any future amendments to, or waivers from, our code of business conduct and ethics within four business days of the waiver or amendment through a website posting or by filing a current report on Form 8-K with the SEC. Information contained on our website does not constitute part of this report. Our reports filed with, or furnished to, the SEC are also available on the SEC’s website at www.sec.gov.
OTHER INFORMATION
EchoCore, Echotek, Ensemble, PowerStream, RACE++, and MultiCore Plus and ASSURE-Stor are registered trademarks, and Mercury Systems, Innovation that Matters, Air Flow-By, Liquid Flow-By, POET, CANGuard, WhiteboxCRYPTO, CodeSEAL, EnforcIT-S, and SecureBootFPGA are trademarks of Mercury Systems, Inc. OpenVPX is a trademark of the VMEbus International Trade Association. All other trademarks and registered trademarks are the property of their respective holders, and are hereby acknowledged.
ITEM 1A.    RISK FACTORS:
We depend heavily on defense electronics programs that incorporate our products and services, which may be only partially funded and are subject to potential termination and reductions and delays in government spending.
Sales of our products and related services, primarily as an indirect subcontractor or team member with defense prime contractors, and in some cases directly, to the U.S. government and its agencies, as well as foreign governments and agencies, accounted for approximately 96%, 96%, and 98% of our total net revenues in fiscal 2018, 2017, and 2016, respectively. Our products and services are incorporated into many different domestic and international defense programs. Over the lifetime of a defense program, the award of many different individual contracts and subcontracts may impact our products’ requirements. The funding of U.S. government programs is subject to Congressional appropriations. Although multiple-year contracts may be planned in connection with major procurements, Congress generally appropriates funds on a fiscal year basis even though a program may continue for many years. Consequently, programs are often only partially funded initially, and additional funds are committed only as Congress makes further appropriations and prime contracts receive such funding. The reduction or delay in funding or termination of a government program in which we are involved would result in a loss of or delay in receiving anticipated future revenues attributable to that program and contracts or orders received. The U.S. government could reduce or terminate a prime contract under which we are a subcontractor or team member irrespective of the quality of our products or services. The termination of a program or the reduction in or failure to commit additional funds to a program in which we are involved could negatively impact our revenues and have a material adverse effect on our financial condition and results of operations. The U.S. defense budget frequently operates under a continuing budget resolution, which increases revenue uncertainty and volatility. During fiscal 2014, the Presidential election, gridlock in Congress, a continuing budget resolution, and the implementation of defense budget sequestration impacted our revenues and increased uncertainty in our business and financial planning. For fiscal 2019 and beyond, the potential for further gridlock in Congress, another continuing budget resolution, or the defense industry operating under sequestration could adversely impact our revenues and increase uncertainty in our business and financial planning. In addition, delays in the funding for new or existing programs, or in defense appropriation generally could negatively impact our revenues and have a material adverse effect on our financial condition and results of operations for the period in which such revenues were originally anticipated. Further, oil price volatility and the decline in oil prices may negatively impact foreign military sales funding program size due to oil's impact on foreign budgets.
Economic conditions could adversely affect our business, results of operations and financial condition.
The world’s financial markets have, at times, experienced turmoil which could have material adverse impacts on our financial condition or our ability to achieve targeted results of operations due to:
reduced and delayed demand for our products;
increased risk of order cancellations or delays;
downward pressure on the prices of our products;

13

Table of Contents

greater difficulty in collecting accounts receivable; and
risks to our liquidity, including the possibility that we might not have access to our cash and short-term investments or to our line of credit when needed.
Further, the funding of the defense programs that incorporate our products and services is subject to the overall U.S. government budget and appropriation decisions and processes, which are driven by numerous factors beyond our control, including geo-political, macroeconomic, and political conditions. Increased federal budget deficits could result in reduced Congressional appropriations, such as defense budget sequestration, for the defense programs that use our defense electronics products and services. Reduced baseline defense budgets could reduce the number of funded programs in which we participate. In addition, the effects of any U.S. Federal government shutdown or extended continuing resolution could potentially reduce or delay the demand for our products. We are unable to predict the likely duration and severity of adverse economic conditions in the United States and other countries, but the longer the duration or the greater the severity, the greater the risks we face in operating our business.
We face other risks and uncertainties associated with defense-related contracts, which may have a material adverse effect on our business.
Whether our contracts are directly with the U.S. government, a foreign government, or one of their respective agencies, or indirectly as a subcontractor or team member, our contracts and subcontracts are subject to special risks. For example:
Changes in government administration and national and international priorities, including developments in the geo-political environment, could have a significant impact on national or international defense spending priorities and the efficient handling of routine contractual matters. These changes could have a negative impact on our business in the future.
Our contracts with the U.S. and foreign governments and their defense prime contractors and subcontractors are subject to termination either upon default by us or at the convenience of the government or contractor if, among other reasons, the program itself has been terminated. Termination for convenience provisions generally entitle us to recover costs incurred, settlement expenses and profit on work completed prior to termination, but there can be no assurance in this regard.
Because we contract to supply goods and services to the U.S. and foreign governments and their prime and subcontractors, we compete for contracts in a competitive bidding process. We may compete directly with other suppliers or align with a prime or subcontractor competing for a contract.  We may not be awarded the contract if the pricing or product offering is not competitive, either at our level or the prime or subcontractor level.  In addition, in the event we are awarded a contract, we are subject to protests by disappointed bidders of contract awards that can result in the reopening of the bidding process and changes in governmental policies or regulations and other political factors. In addition, we may be subject to multiple rebid requirements over the life of a defense program in order to continue to participate on such program, which can result in the loss of the program or significantly reduce our revenue or margin from the program. The government’s requirements for more frequent technology refreshes on defense programs may lead to increased costs and lower long term revenues.
Consolidation among defense industry contractors has resulted in a few large contractors with increased bargaining power relative to us. The increased bargaining power of these contractors may adversely affect our ability to compete for contracts and, as a result, may adversely affect our business or results of operations in the future.
Our customers include U.S. government contractors who must comply with and are affected by laws and regulations relating to the formation, administration, and performance of U.S. government contracts. In addition, when we contract with the U.S. government, we must comply with these laws and regulations, including the organizational conflict-of-interest regulations. A violation of these laws and regulations could result in the imposition of fines and penalties to us or our customers or the termination of our or their contracts with the U.S. government. As a result, there could be a delay in our receipt of orders from our customers, a termination of such orders, or a termination of contracts between us and the U.S. government.
We sell many products to U.S. and international defense contractors and also directly to the U.S. government as a commercial supplier such that cost data is not supplied. To the extent that there are interpretations or changes in the Federal Acquisition Regulations ("FAR") regarding the qualifications necessary to be a commercial item supplier, there could be a material adverse effect on our business and operating results. For example, there have been legislative proposals to narrow the definition of a “commercial item” (as defined in the FAR) that could limit our ability to contract as a commercial item supplier. In addition, growth in our defense sales relative to our commercial sales could adversely impact our status as a commercial supplier, which could adversely affect our business and operating results. Changes in our mix of business, in federal regulations, or in the interpretation of federal regulations, may subject us to audit by the Defense Contract Audit Agency ("DCAA") for certain of our products or services. Operating under a cost-accounting business

14

Table of Contents

model rather than our historical commercial item business model could adversely impact our revenues and profitability. It could also trigger contract coverage under the Cost Accounting Standards (CAS), further impacting the commercial operating model and requiring compliance with a defined set of business systems criteria. Failure to comply with applicable CAS requirements could adversely impact our ability to win future CAS-type contracts.
During fiscal 2018, we ceased to qualify as a “small business” for government contracts purposes under the definition of that term in an applicable NAICS code because we had more than 1,250 employees. Loss of our small business status could negatively impact us since our customers purchases from us would not qualify as purchases from a small business, customers may flow down additional FAR clauses in their contracts with us that are less favorable than our existing contract terms and conditions, and that we may need to implement a sub-contracting plan with other companies that qualify as a small business.
We are subject to the Defense Federal Acquisition Regulations Supplement, referred to as DFARS, in connection with our defense work for the U.S. government and defense prime contractors. Amendments to the DFARS, such as the amendment to the DFARS specialty metals clause requiring that the specialty metals in specified items be smelted or produced in the U.S. or other qualifying countries, may increase our costs for certain materials or result in supply-chain difficulties or production delays due to the limited availability of compliant materials. Compliance with the conflict minerals regulations enacted pursuant to the Dodd Frank legislation may pose similar risks and increase our costs. The new DFARS cyber-security requirements may increase our costs or delay the award of contracts if we are unable to certify that we satisfy such cyber-security requirements.
The U.S. government or a defense prime contractor customer could require us to relinquish data rights to a product in connection with performing work on a defense contract, which could lead to a loss of valuable technology and intellectual property in order to participate in a government program.
The U.S. government or a defense prime contractor customer could require us to enter into a firm fixed price or cost-plus contract that could negate our cost efficiency initiatives.
We are subject to various U.S. federal export-control statutes and regulations which affect our business with, among others, international defense customers. In certain cases the export of our products and technical data to foreign persons, and the provision of technical services to foreign persons related to such products and technical data, may require licenses from the U.S. Department of Commerce or the U.S. Department of State. The time required to obtain these licenses, and the restrictions that may be contained in these licenses, may put us at a competitive disadvantage with respect to competing with international suppliers who are not subject to U.S. federal export control statutes and regulations. In addition, violations of these statutes and regulations can result in civil and, under certain circumstances, criminal liability as well as administrative penalties which could have a material adverse effect on our business and operating results.
We anticipate that sales to our U.S. prime defense contractor customers as part of foreign military sales (“FMS”) programs will be an increasing part of our business going forward. These FMS sales combine several different types of risks and uncertainties highlighted above, including risks related to government contracts, risks related to defense contracts, timing and budgeting of foreign governments, and approval from the U.S. and foreign governments related to the programs, all of which may be impacted by macroeconomic and geopolitical factors outside of our control. For example, the decline in oil prices may negatively impact foreign defense budgets.
Certain of our employees with appropriate security clearances may require access to classified information in connection with the performance of a U.S. government contract. We must comply with security requirements pursuant to the National Industrial Security Program Operating Manual, or NISPOM, and other U.S. government security protocols when accessing sensitive information. Failure to comply with the NISPOM or other security requirements may subject us to civil or criminal penalties, loss of access to sensitive information, loss of a U.S. government contract, or potentially debarment as a government contractor.
We may need to invest additional capital to build out higher level security infrastructure at certain of our facilities to capture new design wins on defense programs with higher level security requirements. Failure to invest in such infrastructure may limit our ability to obtain new design wins on defense programs. In addition, we may need to invest in additional secure laboratory space to efficiently integrate subsystem level solutions and maintain quality assurance on current and future programs.

15

Table of Contents

The loss of one or more of our largest customers, programs, or applications could adversely affect our results of operations.
We are dependent on a small number of customers for a large portion of our revenues. A significant decrease in the sales to or loss of any of our major customers would have a material adverse effect on our business and results of operations. In fiscal 2018, both Lockheed Martin Corporation and Raytheon Company accounted for 19% of our total net revenues. In fiscal 2017, Lockheed Martin Corporation accounted for 20% of our total net revenues and Raytheon Company accounted for 16% of our total net revenues. In fiscal 2016, Lockheed Martin Corporation accounted for 23% of our total net revenues and Raytheon Company accounted for 20% of our total net revenues. Customers in the defense market generally purchase our products in connection with government programs that have a limited duration, leading to fluctuating sales to any particular customer in this market from year to year. In addition, our revenues are largely dependent upon the ability of customers to develop and sell products that incorporate our products. No assurance can be given that our customers will not experience financial, technical or other difficulties that could adversely affect their operations and, in turn, our results of operations. Additionally, on a limited number of programs the customer has co-manufacturing rights which could lead to a shift of production on such a program away from us which in turn could lead to lower revenues.
We are dependent on sales for radar applications for a large portion of our revenues. Sales related to radar applications accounted for 32%, 37%, and 52% of our total net revenues for fiscal 2018, 2017, and 2016, respectively. While our radar sales relate to multiple different platforms and defense programs, our revenues are largely dependent upon our customers incorporating our products into radar applications. For the fiscal years ended June 30, 2018 and 2017, no single program individually comprised ten percent or more of our revenues. For the fiscal year ended June 30, 2016, the Surface Electronic Warfare Improvement Program ("SEWIP") and Aegis programs comprised 12% and 10% of our revenues, respectively. Loss of a significant radar program could adversely affect our results of operations.
Going forward, we believe the SEWIP, Aegis, F-35, F-16 and the Patriot missile defense programs could be a large portion of our future revenues in the coming years, and the loss or cancellation of these programs could adversely affect our future results. In addition, as we shift our business mix toward more services-led engagements with legacy product revenues becoming a lesser amount of our total revenues, we could experience downward pressure on margins and reduced profitability. Further, new programs may yield lower margins than legacy programs, which could result in an overall reduction in gross margins.
If we are unable to respond adequately to our competition or to changing technology, we may lose existing customers and fail to win future business opportunities.
The markets for our products are highly competitive and are characterized by rapidly changing technology, frequent product performance improvements and evolving industry standards. Competitors may be able to offer more attractive pricing or develop products that could offer performance features that are superior to our products, resulting in reduced demand for our products. We may be unable to keep pace with competitors’ marketing and the lack of visibility in the marketplace may negatively impact design wins, bookings, and revenues. Customers may also decide to reduce costs and accept the least costly technically acceptable alternative to our products or services. In addition, customers may decide to insource products that they have traditionally outsourced to us. Due to the rapidly changing nature of technology, we may not become aware in advance of the emergence of new competitors into our markets. The emergence of new competitors into markets targeted by us could result in the loss of existing customers and may have a negative impact on our ability to win future business opportunities. In addition to adapting to rapidly changing technology, we must also develop a reputation as a best-of-breed technology provider. Competitors may be perceived in the market as being more brand-based providers of open-source architectures versus Mercury. Perceptions of Mercury as a high-cost provider, or as having stale technology could cause us to lose existing customers or fail to win new business. Further, our lack of strong engagements with important government-funded laboratories (e.g. DARPA, MIT Lincoln Labs, MITRE) may inhibit our ability to become subsystem solution design partners with our defense prime customers.
With continued microprocessor evolution, low-end systems could become adequate to meet the requirements of an increased number of the lesser-demanding applications within our target markets. Workstation or blade center computer manufacturers and other low-end single-board computer, or new competitors, may attempt to penetrate the high-performance market for defense electronics systems, which could have a material adverse effect on our business. In addition, our customers provide products to markets that are subject to technological cycles. Any change in the demand for our products due to technological cycles in our customers’ end markets could result in a decrease in our revenues.

16

Table of Contents

Competition from existing or new companies could cause us to experience downward pressure on prices, fewer customer orders, reduced margins, the inability to take advantage of new business opportunities, and the loss of market share.
We compete in highly competitive industries, and our customers generally extend the competitive pressures they face throughout their respective supply chains. Additionally, our markets are facing increasing industry consolidation, resulting in larger competitors who have more market share to put more downward pressure on prices and offer a more robust portfolio of products and services. We are subject to competition based upon product design, performance, pricing, quality and services. Our product performance, engineering expertise, and product quality have been important factors in our growth. While we try to maintain competitive pricing on those products that are directly comparable to products manufactured by others, in many instances our products will conform to more exacting specifications and carry a higher price than analogous products. Many of our customers and potential customers have the capacity to design and internally manufacture products that are similar to our products. We face competition from research and product development groups and the manufacturing operations of current and potential customers, who continually evaluate the benefits of internal research, product development, and manufacturing versus outsourcing. Our defense prime contractor customers could decide to pursue secure processing as one of their core competencies and insource that technology development and production rather than purchase that capability from us as a supplier. This competition could result in fewer customer orders and a loss of market share.
Our sales in the defense market could be adversely affected by the emergence of commodity-type products as acceptable substitutes for certain of our products and by uncertainty created by emerging changes in standards that may cause customers to delay purchases or seek alternative solutions.
Our products for the defense market are designed for operating under physical constraints such as limited space, weight, and electrical power. Furthermore, these products are often designed to be “rugged,” that is, to withstand enhanced environmental stress such as extended temperature range, shock, vibration, and exposure to sand or salt spray. Historically these requirements have often precluded the use of less expensive, readily available commodity-type systems typically found in more benign non-military settings. Factors that may increase the acceptability of commodity-type products in some defense platforms that we serve include improvements in the physical properties and durability of such alternative products, combined with the relaxation of physical and ruggedness requirements by the military due to either a reevaluation of those requirements or the installation of products in a more highly environmentally isolated setting. These developments could negatively impact our revenues and have a material adverse effect on our business and operating results.
If we fail to respond to commercial industry cycles in terms of our cost structure, manufacturing capacity and/or personnel need, our business could be seriously harmed.
The timing, length, and severity of the up-and-down cycles in the commercial and defense industries are difficult to predict. This cyclical nature of the industries in which we operate affects our ability to accurately predict future revenue, and in some cases, future expense levels. During down cycles in our industry, the financial results of our customers may be negatively impacted, which could result not only in a decrease in orders but also a weakening of their financial condition that could impair our ability to recognize revenue or to collect on outstanding receivables. When cyclical fluctuations result in lower than expected revenue levels, operating results may be adversely affected and cost reduction measures may be necessary in order for us to remain competitive and financially sound. We must be in a position to adjust our cost and expense structure to reflect prevailing market conditions and to continue to motivate and retain our key employees. If we fail to respond, then our business could be seriously harmed. In addition, during periods of rapid growth, we must be able to increase engineering and manufacturing capacity and personnel to meet customer demand. We can provide no assurance that these objectives can be met in a timely manner in response to industry cycles. Each of these factors could adversely impact our operating results and financial condition.
Implementation of our growth strategy may not be successful, which could affect our ability to increase revenues.
Our growth strategy includes developing new products, adding new customers within our existing markets, and entering new markets, developing our manufacturing capabilities, as well as identifying and integrating acquisitions and achieving revenue and cost synergies and economies of scale. Our ability to compete in new markets will depend upon a number of factors including, among others:
our ability to create demand for products in new markets;
our ability to respond to changes in our customers’ businesses by updating existing products and introducing, in a timely fashion, new products which meet the needs of our customers;
our ability to increase our market visibility and penetration with the prime defense contractors;
our ability to develop a reputation as a best-of-breed technology provider;
the quality of our new products;
our ability to respond rapidly to technological change;

17

Table of Contents

our ability to increase our in-house manufacturing capacity and utilization; and
our ability to successfully integrate any acquisitions that we make and achieve revenue and cost synergies and economies of scale.
The failure to do any of the foregoing could have a material adverse effect on our business, financial condition and results of operations. In addition, we may face competition in these new markets from various companies that may have substantially greater research and development resources, marketing and financial resources, manufacturing capability, and/or customer support organizations.
Growing our business, in particular by providing services and products such as sophisticated subsystems for major defense programs could strain our operational capacity and working capital demands if not properly anticipated and managed. Pursuing such growth could result in our operational and infrastructure resources being spread too thin, which could negatively impact our ability to deliver quality product on schedule and on budget. Providing quality services for subsystem level products is a key driver of our growth strategy and the failure to properly scale our capabilities to support our customers at a subsystem level could result in lost opportunities and revenues. Failure to implement consistent management systems across our entire platform, to increase the level of automation to scale our operations and to establish a uniform program management process for lifecycle management could negatively impact our ability to generate efficiencies to achieve cost reduction objectives.
Future acquisitions may adversely affect our financial condition.
As part of our strategy for growth, we expect to continue to explore acquisitions or strategic alliances, which ultimately may not be completed or be beneficial to us.
Acquisitions may pose risks to our operations, including:
problems and increased costs in connection with the integration of the personnel, operations, technologies, or products of the acquired businesses;
layering of integration activity due to multiple overlapping acquisitions;
unanticipated costs;
failure to achieve anticipated increases in revenues and profitability;
diversion of management’s attention from our core business;
adverse effects on business relationships with suppliers and customers and those of the acquired company;
acquired assets becoming impaired as a result of technical advancements or worse-than-expected performance by the acquired company;
failure to rationalize manufacturing capacity, locations, and operating models to achieve anticipated economies of scale, or disruptions to manufacturing and product design operations during the combination of facilities;
failure to rationalize business and information systems and to expand the IT infrastructure and security protocols throughout the enterprise;
volatility associated with accounting for earn-outs in a given transaction;
entering markets in which we have no, or limited, prior experience;
potential loss of key employees; and
adversely affect our internal control over financial reporting before the acquiree's complete integration into our control environment.
In addition, in connection with any acquisitions or investments we could:
issue stock that would dilute our existing shareholders’ ownership percentages;
incur debt and assume liabilities;
obtain financing on unfavorable terms, or not be able to obtain financing on any terms at all;
incur amortization expenses related to acquired intangible assets or incur large and immediate write-offs;
incur large expenditures related to office closures of the acquired companies, including costs relating to the termination of employees and facility and leasehold improvement charges resulting from our having to vacate the acquired companies’ premises; and
reduce the cash that would otherwise be available to fund operations or for other purposes.

18

Table of Contents

The failure to successfully integrate any acquisitions in an efficient or timely manner may negatively impact our financial condition and operating results, or we may not be able to fully realize anticipated savings. In addition, our competitors could try to emulate our acquisition strategy, leading to greater competition for scarce acquisition targets and could lead to larger competitors if they succeed in emulating our strategy.
We may not realize the expected benefits, including synergies, of the recent acquisitions of Themis Computer and Germane Systems because of integration difficulties and other challenges.
While we expect the Themis and Germane acquisitions to result in synergies and other financial and operational benefits, we may be unable to realize these synergies or other benefits in the timeframe that we expect or at all. The success of the acquisitions will depend, in part, on our ability to realize the anticipated benefits from integrating such businesses with our existing business. The integration process may be complex, costly and time consuming.
The difficulties of integrating the operations of Themis and Germane include, among others:
failure to implement our business plan for the combined business;
unanticipated issues in integrating manufacturing, logistics, business systems, information and communications systems, and other infrastructure items;
unanticipated changes in applicable laws and regulations;
failure to retain key employees;
failure to retain key customers;
failure to rationalize our supply chain;
operating risks inherent in Themis and Germane and our business;
the impact of any assumed legal proceedings;
the impact on our internal controls and compliance with the regulatory requirements under the Sarbanes-Oxley Act of 2002; and
unanticipated issues, expenses, charges and liabilities related to the acquisitions of Themis and Germane.
We may not be able to maintain the levels of revenue, earnings or operating efficiency that Mercury and its recent acquisitions of Themis and Germane had achieved or might achieve separately. In addition, we may not accomplish the integration of these businesses smoothly, successfully or within the anticipated costs or timeframe. Further, we will incur implementation costs relative to these anticipated cost synergies, and our expectations with respect to integration or synergies as a result of these acquisitions may not materialize. Accordingly, you should not place undue reliance on our anticipated synergies.
The market price of our common stock may decline as a result of our M&A activity.
The market price of our common stock may decline as a result of our merger and acquisition activity if, among other things, we are unable to achieve the expected growth in earnings, or if the operational cost savings estimates in connection with the integration of Themis and Germane are not realized. The market price of our common stock also may decline if we do not achieve the perceived benefits of the acquisitions as rapidly or to the extent anticipated by financial or industry analysts or if the effect of the acquisitions on our financial results is not consistent with the expectations of financial or industry analysts.
We may incur substantial indebtedness.
In June 2017, we amended our revolving credit facility, increasing and extending the facility into a $400.0 million, 5-year revolving credit line expiring in June 2022 ("the Revolver"). In connection with the amendment, we repaid the remaining principal on our term loan using cash on hand. At June 30, 2018, drawings on the Revolver were $195.0 million and we drew an additional $45.0 million on the Revolver for our acquisition of Germane in July 2018.
Subject to the limits contained in the Revolver, we may incur substantial additional debt from time to time to finance working capital, capital expenditures, investments or acquisitions, or for other purposes. If we do so, the risks related to our debt could intensify. Specifically, our debt could have important consequences to our investors, including the following:
making it more difficult for us to satisfy our obligations under our debt instruments, including, without limitation, the Revolver; and if we fail to comply with these requirements, an event of default could result;
limiting our ability to obtain additional financing to fund future working capital, capital expenditures, acquisitions or other general corporate requirements;

19

Table of Contents

requiring a substantial portion of our cash flows to be dedicated to debt service payments instead of other purposes, thereby reducing the amount of cash flows available for working capital, capital expenditures, acquisitions and other general corporate purposes;
increasing our vulnerability to general adverse economic and industry conditions;
exposing us to the risk of increased interest rates as certain of our borrowings have variable interest rates, which could increase the cost of servicing our financial instruments and could materially reduce our profitability and cash flows;
limiting our flexibility in planning for and reacting to changes in the industry in which we compete;
placing us at a disadvantage compared to other, less leveraged competitors; and
increasing our cost of borrowing.
In addition, the Revolver contains restrictive covenants that may limit our ability to engage in activities that are in our long term best interest. Our failure to comply with those covenants could result in an event of default which, if not cured or waived, could result in the acceleration of all our debt. And, if we were unable to repay the amounts due and payable, the lenders under the Revolver could proceed against the collateral granted to them to secure that indebtedness.
In addition, increases in interest rates will increase the cost of servicing our financial instruments with exposure to interest rate risk and could materially reduce our profitability and cash flows.
We have a significant amount of goodwill and intangible assets on our consolidated financial statements that are subject to impairment based upon future adverse changes in our business or prospects.
At June 30, 2018, the carrying values of goodwill and identifiable intangible assets on our balance sheet were $497.4 million and $177.9 million, respectively. We evaluate indefinite lived intangible assets and goodwill for impairment annually in the fourth quarter, or more frequently if events or changes in circumstances indicate that the asset might be impaired. Indefinite lived intangible assets are impaired and goodwill impairment is indicated when their book value exceeds fair value. We also review finite-lived intangible assets and long-lived assets when indications of potential impairment exist, such as a significant reduction in undiscounted cash flows associated with the assets. Should the fair value of our long-lived assets decline because of reduced operating performance, market declines, or other indicators of impairment, a charge to operations for impairment may be necessary. The value of goodwill and intangible assets from the allocation of purchase price from our recent acquisitions will be derived from our business operating plans and is susceptible to an adverse change in demand, input costs or general changes in our business or industry and could require an impairment charge in the future.
We may be unable to obtain critical components from suppliers, which could disrupt or delay our ability to deliver products to our customers.
Several components used in our products are currently obtained from sole-source suppliers. We are dependent on key vendors like LSI Logic Corporation, Xilinx, Inc., and IBM Corporation for custom-designed application-specific integrated circuits (“ASICs”) and field programmable gate arrays (“FPGAs”), Freescale Semiconductor, Inc. and IBM Corporation for PowerPC microprocessors, Intel Corporation for our next generation processors, IBM Corporation for a specific SRAM, Curtiss Wright Corporation and Motorola, Inc. for chassis and chassis components, Micron Technology, Inc. for specific memory products, and Benchmark Electronics, Inc. for board assembly, test and integration. Generally, suppliers may terminate their contracts with us without cause upon 30 days’ notice and may cease offering their products upon 180 days’ notice. If any of our sole-source suppliers limits or reduces the sale of these components, we may be unable to fulfill customer orders in a timely manner or at all. In addition, if these or other component suppliers, some of which are small companies, experienced financial difficulties or other problems that prevented them from supplying us with the necessary components, we could experience a loss of revenues due to our inability to fulfill orders. These sole-source and other suppliers are each subject to quality and performance issues, materials shortages, excess demand, reduction in capacity and other factors that may disrupt the flow of goods to us or to our customers, which would adversely affect our business and customer relationships. We have no guaranteed supply arrangements with our suppliers and there can be no assurance that these suppliers will continue to meet our requirements. If supply arrangements are interrupted, we may not be able to find another supplier on a timely or satisfactory basis. We may incur significant set-up costs and delays in manufacturing should it become necessary to replace any key vendors due to work stoppages, shipping delays, financial difficulties, natural or manmade disasters or other factors.

20

Table of Contents

We may not be able to effectively manage our relationships with contract manufacturers.
We may not be able to effectively manage our relationship with contract manufacturers, and the contract manufacturers may not meet future requirements for timely delivery. We rely on contract manufacturers to build hardware sub-assemblies for our products in accordance with our specifications. During the normal course of business, we may provide demand forecasts to contract manufacturers up to five months prior to scheduled delivery of our products to customers. If we overestimate requirements, the contract manufacturers may assess cancellation penalties or we may be left with excess inventory, which may negatively impact our earnings. If we underestimate requirements, the contract manufacturers may have inadequate inventory, which could interrupt manufacturing of our products and result in delays in shipment to customers and revenue recognition. Contract manufacturers also build products for other companies, and they may not have sufficient quantities of inventory available or sufficient internal resources to fill our orders on a timely basis or at all.
In addition, there have been a number of major acquisitions within the contract manufacturing industry in recent periods. While there has been no significant impact on our contract manufacturers to date, future acquisitions could potentially have an adverse effect on our working relationships with contract manufacturers. Moreover, we currently rely primarily on two contract manufacturers, Benchmark Electronics, Inc. and Omega Electronics Manufacturing Services. The failure of these contract manufacturers to fill our orders on a timely basis or in accordance with our customers’ specifications could result in a loss of revenues and damage to our reputation. We may not be able to replace these contract manufacturer in a timely manner or without significantly increasing our costs if such contract manufacturer were to experience financial difficulties or other problems that prevented it from fulfilling our order requirements.
With the expansion of our microelectronics and RF and microwave product lines in recent years, primarily related to the acquisitions of Delta in fiscal 2017 and the Carve-Out Business in fiscal 2016, as well as our earlier acquisitions of Micronetics, Inc., KOR Electronics, and LNX Corporation, the mix and volume of products that we manufacture in-house has increased. With the building of our Advanced Microelectronics Center in Hudson, New Hampshire during fiscal 2014, we are becoming more vertically integrated in our microwave and RF product lines. This vertical integration could lead to higher capital intensity, labor utilization rate volatility which could affect our profitability, and higher fixed costs. Also, the changes to business processes and IT systems required to combine two locations into a single site like our Advanced Microelectronics Center may interrupt our operations for a period of time resulting in higher costs, lower revenues and missed opportunities for design wins. In addition, Benchmark Electronics, Inc. notified us in 2016 that they would no longer contract manufacture certain of our digital processing products at their Huntsville, Alabama facility due to internal integration planning at Benchmark. As a result, we began to internally manufacture the impacted Huntsville, Alabama digital processing product line at our Phoenix, Arizona facility. With our build out of a surface mount technology manufacturing capability in our Phoenix, Arizona facility, which we refer to as our USMO, we are developing a second source for our digital processing product manufacturing needs to complement our contract manufacturing relationship with Benchmark Electronics. With a source of internal manufacturing to meet an increasing portion of our digital processing product manufacturing needs, we will need to effectively manage our relationship with our contract manufacturers to manage our order volumes, scale production to meet volume requirements, and maintain necessary inventory levels.
We are exposed to risks associated with international operations and markets.
We market and sell products in international markets, have established sales offices and subsidiaries in the United Kingdom and Japan and, as part of the acquisitions of CES, RTL, and Themis, we now have manufacturing and/or engineering facilities and subsidiaries in Switzerland, Spain, Canada, and France. Revenues from international operations accounted for 9%, 7%, and 4% of our total net revenues in fiscal 2018, 2017, and 2016, respectively. We also ship directly from our U.S. operations to international customers. There are inherent risks in transacting business internationally, including:
changes in applicable laws and regulatory requirements;
export and import restrictions;
export controls relating to technology;
tariffs and other trade barriers;
less favorable intellectual property laws;
difficulties in staffing and managing foreign operations;
longer payment cycles;
problems in collecting accounts receivable;
adverse economic conditions in foreign markets;
political instability;
fluctuations in currency exchange rates;

21

Table of Contents

expatriation controls; and
potential adverse tax consequences.
There can be no assurance that one or more of these factors will not have a material adverse effect on our future international activities and, consequently, on our business and results of operations.
With the acquisition of CES in fiscal 2017, we acquired a pension plan (the "Plan") for Swiss employees, mandated by Swiss law. Since participants of the Plan are entitled to a defined rate of interest on contributions made, the Plan meets the criteria for a defined benefit plan under U.S. GAAP. The Plan, an independent pension fund, is part of a multi-employer plan with unrestricted joint liability for all participating companies and the economic interest in the Plan’s overfunding or underfunding is allocated to each participating company based on an allocation key determined by the Plan. U.S. GAAP requires an employer to recognize the funded status of the defined benefit plan on the balance sheet, which we have presented in other long-term liabilities on our consolidated balance sheet at June 30, 2018. The funded status may vary from year to year due to changes in the fair value of Plan’s assets and variations on the underlying assumptions in the Plan and we may have to record an increased liability as a result of fluctuations in the value of the Plan’s assets. As of June 30, 2018, we had a liability of $6.1 million in other non-current liabilities representing the net under-funded status of the Plan.
In addition, we must comply with the Foreign Corrupt Practices Act, or the FCPA. The FCPA generally requires companies to maintain adequate record-keeping and internal accounting practices to accurately reflect the transactions of the company and prohibits U.S. companies and their intermediaries from making corrupt payments to foreign officials for the purpose of obtaining or keeping business or otherwise obtaining favorable treatment. Under the FCPA, U.S. companies may be held liable for actions taken by strategic or local partners or representatives. If we or our intermediaries fail to comply with the requirements of the FCPA, governmental authorities in the United States could seek to impose civil and criminal penalties, which could have a material adverse effect on our business, results of operations, financial conditions and cash flows.
We may be exposed to unfavorable currency exchange rate fluctuations, which may lead to lower operating margins, or may cause us to raise prices which could result in reduced revenues.
Currency exchange rate fluctuations could have an adverse effect on our net revenues and results of operations. Unfavorable currency fluctuations could require us to increase prices to foreign customers, which could result in lower net revenues from such customers. Alternatively, if we do not adjust the prices for our products in response to unfavorable currency fluctuations, our results of operations could be adversely affected. In addition, most sales made by our foreign subsidiaries are denominated in the currency of the country in which these products are sold, and the currency they receive in payment for such sales could be less valuable at the time of receipt as a result of exchange rate fluctuations. We do not currently hedge our foreign currency exchange rate exposure.
If we are unable to respond to technological developments and changing customer needs on a timely and cost-effective basis, our results of operations may be adversely affected.
Our future success will depend in part on our ability to enhance current products and to develop new products on a timely and cost-effective basis in order to respond to technological developments and changing customer needs. Defense customers, in particular, demand frequent technological improvements as a means of gaining military advantage. Military planners have historically funded significantly more design projects than actual deployments of new equipment, and those systems that are deployed tend to contain the components of the subcontractors selected to participate in the design process. In order to participate in the design of new defense electronics systems, we must demonstrate the ability to deliver superior technological performance on a timely and cost-effective basis. There can be no assurance that we will secure an adequate number of defense design wins in the future, that the equipment in which our products are intended to function will eventually be deployed in the field, or that our products will be included in such equipment if it eventually is deployed.
Customers in our commercial markets also seek technological improvements through product enhancements and new generations of products. OEMs historically have selected certain suppliers whose products have been included in the OEMs’ machines for a significant portion of the products’ life cycles. We may not be selected to participate in the future design of any commercial equipment, or if selected, we may not generate any revenues for such design work.
The design-in process is typically lengthy and expensive, and there can be no assurance that we will be able to continue to meet the product specifications of customers in a timely and adequate manner. In addition, any failure to anticipate or respond adequately to changes in technology, customer preferences and future order demands, or any significant delay in product developments, product introductions or order volume, could negatively impact our financial condition and results of operations, including the risk of inventory obsolescence. Because of the complexity of our products, we have experienced delays from time to time in completing products on a timely basis. If we are unable to design, develop or introduce competitive new products on a timely basis, our future operating results may be adversely affected.

22

Table of Contents

Our products are complex, and undetected defects may increase our costs, harm our reputation with customers or lead to costly litigation.
Our products are extremely complex and must operate successfully with complex products of our customers and their other vendors. Our products may contain undetected errors when first introduced or as we introduce product upgrades. The pressures we face to be the first to market new products or functionality and the lapsed time before our products are integrated into our customer's systems increases the possibility that we will offer products in which we or our customers later discover problems. We have experienced new product and product upgrade errors in the past and expect similar problems in the future. These problems may cause us to incur significant warranty costs and costs to support our service contracts and divert the attention of personnel from our product development efforts. Undetected errors may adversely affect our product’s ease of use and may create customer satisfaction issues. If we are unable to repair these problems in a timely manner, we may experience a loss of or delay in revenue and significant damage to our reputation and business prospects. Many of our customers rely upon our products for mission-critical applications. Because of this reliance, errors, defects, or other performance problems in our products could result in significant financial and other damage to our customers. Our customers could attempt to recover those losses by pursuing products liability claims against us which, even if unsuccessful, would likely be time-consuming and costly to defend and could adversely affect our reputation.
We may be unsuccessful in protecting our intellectual property rights which could result in the loss of a competitive advantage.
Our ability to compete effectively against other companies in our industry depends, in part, on our ability to protect our current and future proprietary technology under patent, copyright, trademark, trade secret and unfair competition laws. We cannot assure that our means of protecting our proprietary rights in the United States or abroad will be adequate, or that others will not develop technologies similar or superior to our technology or design around our proprietary rights. In addition, we may incur substantial costs in attempting to protect our proprietary rights.
Also, despite the steps taken by us to protect our proprietary rights, it may be possible for unauthorized third parties to copy or reverse-engineer aspects of our products, develop similar technology independently or otherwise obtain and use information from our supply chain that we regard as proprietary and we may be unable to successfully identify or prosecute unauthorized uses of our technology. Furthermore, with respect to our issued patents and patent applications, we cannot assure you that any patents from any pending patent applications (or from any future patent applications) will be issued, that the scope of any patent protection will exclude competitors or provide competitive advantages to us, that any of our patents will be held valid if subsequently challenged or that others will not claim rights in or ownership of the patents (and patent applications) and other proprietary rights held by us.
If we become subject to intellectual property infringement claims, we could incur significant expenses and could be prevented from selling specific products.
We may become subject to claims that we infringe the intellectual property rights of others in the future. We cannot assure that, if made, these claims will not be successful. Any claim of infringement could cause us to incur substantial costs defending against the claim even if the claim is invalid, and could distract management from other business. Any judgment against us could require substantial payment in damages and could also include an injunction or other court order that could prevent us from offering certain products.
Our need for continued or increased investment in research and development may increase expenses and reduce our profitability.
Our industry is characterized by the need for continued investment in research and development. If we fail to invest sufficiently in research and development, our products could become less attractive to potential customers and our business and financial condition could be materially and adversely affected. As a result of the need to maintain or increase spending levels in this area and the difficulty in reducing costs associated with research and development, our operating results could be materially harmed if our research and development efforts fail to result in new products or if revenues fall below expectations. As a result of our commitment to invest in research and development, spending levels of research and development expenses as a percentage of revenues may fluctuate in the future. In addition, defense prime contractors could increase their requirement for sub-contractors, such as Mercury, to increase their share in the research and development costs for new programs and design wins.

23

Table of Contents

Our results of operations are subject to fluctuation from period to period and may not be an accurate indication of future performance.
We have experienced fluctuations in operating results in large part due to the sale of products and services in relatively large dollar amounts to a relatively small number of customers. Customers specify delivery date requirements that coincide with their need for our products and services. Because these customers may use our products and services in connection with a variety of defense programs or other projects with different sizes and durations, a customer’s orders for one quarter generally do not indicate a trend for future orders by that customer. As such, we have not been able in the past to consistently predict when our customers will place orders and request shipments so that we cannot always accurately plan our manufacturing, inventory, and working capital requirements. As a result, if orders and shipments differ from what we predict, we may incur additional expenses and build excess inventory, which may require additional reserves and allowances and reduce our working capital and operational flexibility. Any significant change in our customers’ purchasing patterns could have a material adverse effect on our operating results and reported earnings per share for a particular quarter. Thus, results of operations in any period should not be considered indicative of the results to be expected for any future period.
High quarterly book-ship ratios may pressure inventory and cash flow management, necessitating increased inventory balances to ensure quarterly revenue attainment. Increased inventory balances tie up additional capital, limiting our operational flexibility. Some of our customers may have become conditioned to wait until the end of a quarter to place orders in the expectation of receiving a discount. Customers conditioned to seek quarter-end discounts increase risk and uncertainty in our financial forecasting and decrease our margins and profitability.
Our quarterly results may be subject to fluctuations resulting from a number of other factors, including:
delays in completion of internal product development projects;
delays in shipping hardware and software;
delays in acceptance testing by customers;
a change in the mix of products sold to our served markets;
changes in customer order patterns;
production delays due to quality problems with outsourced components;
inability to scale quick reaction capability products due to low product volume;
shortages and costs of components;
delays due to the implementation of new tariffs or other trade barriers;
the timing of product line transitions;
declines in quarterly revenues from previous generations of products following announcement of replacement products containing more advanced technology;
inability to realize the expected benefits from acquisitions and restructurings, or delays in realizing such benefits;
potential asset impairment, including goodwill and intangibles, or restructuring charges; and
changes in estimates of completion on fixed price service engagements.
In addition, from time to time, we have entered into contracts, referred to as development contracts, to engineer a specific solution based on modifications to standard products. Gross margins from development contract revenues are typically lower than gross margins from standard product revenues. We intend to continue to enter into development contracts and anticipate that the gross margins associated with development contract revenues will continue to be lower than gross margins from standard product sales.
Another factor contributing to fluctuations in our quarterly results is the fixed nature of expenditures on personnel, facilities and marketing programs. Expense levels for these programs are based, in significant part, on expectations of future revenues. If actual quarterly revenues are below management’s expectations, our results of operations will likely be adversely affected.
Further, the preparation of financial statements in conformity with accounting principles generally accepted in the United States requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the dates of the financial statements and the reported amounts of revenues and expenses during the reporting periods. Actual results could differ from those estimates, and changes in estimates in subsequent periods could cause our results of operations to fluctuate.

24

Table of Contents

Changes in regulations could materially adversely affect us.
Our business, results of operations, or financial condition could be materially adversely affected if laws, regulations, or standards relating to us or our products are newly implemented or changed. In addition, our compliance with existing regulations may have a material adverse impact on us. Under applicable federal securities laws, we are required to evaluate and determine the effectiveness of our internal control structure and procedures for financial reporting. Should we or our independent registered public accounting firm determine that we have material weaknesses in our internal controls, our results of operations or financial condition may be materially adversely affected or our stock price may decline.
We rely on the significant experience and specialized expertise of our senior management, engineering and operational staff and must retain and attract qualified and highly skilled personnel in order to grow our business successfully.
Our performance is substantially dependent on the continued services and performance of our senior management and our highly qualified team of engineers, many of whom have numerous years of experience, specialized expertise in our business, and security clearances required for certain defense projects. If we are not successful in hiring and retaining highly qualified engineers, we may not be able to extend or maintain our engineering expertise, and our future product development efforts could be adversely affected. Competition for hiring these employees is intense, especially with regard to engineers with specialized skills and security clearances required for our business, and we may be unable to hire and retain enough engineers to implement our growth strategy. Like our defense prime contractor customers, we face the potential for knowledge drain due to the impending retirement of the older members of our engineering workforce in the coming years.
We may be unable to deliver subsystem level products and related services on time and on budget with our limited engineering resources. Without sufficient resources in hardware, software, and mechanical engineering and quality assurance we may be unable to adequately scale our business and deliver the subsystem solutions that our customers expect. We must also develop new engineering talent in our engineering base to contain high engineering costs to alleviate pressures on our margins and price points.
Increased workloads and responsibilities due to cost containment measures in recent years has led to a leaner employee base, increasing our risk of employee and organizational fatigue. Resulting lower morale and organizational disruption could lead to execution issues, missed commitments, and general employee attrition.
Our future success also depends on our ability to timely identify, attract, hire, train, retain and motivate highly skilled managerial and operational personnel as we continue our pace of growth. In addition, our ability to maintain growth as a portion of our workforce nears retirement is dependent upon our ability to adapt to the pending changes in our workforce demographics. If we fail to attract, integrate and retain the necessary personnel, our ability to maintain and grow our business could suffer significantly. Further, stock price volatility and improvements in the economy could impact our ability to attract and retain key personnel.
If we experience a disaster or other business continuity problem, we may not be able to recover successfully, which could cause material financial loss, loss of human capital, regulatory actions, reputational harm, or legal liability.
If we experience a local or regional disaster or other business continuity problem, such as an earthquake, terrorist attack, pandemic or other natural or man-made disaster, our continued success will depend, in part, on the availability of our personnel, our office facilities, and the proper functioning of our computer, telecommunication and other related systems and operations. As we attempt to grow our operations, the potential for particular types of natural or man-made disasters, political, economic or infrastructure instabilities, or other country- or region-specific business continuity risks increases.
If we are unable to continue to obtain U.S. federal government authorization regarding the export of our products, or if current or future export laws limit or otherwise restrict our business, we could be prohibited from shipping our products to certain countries, which would harm our ability to generate revenue.
We must comply with U.S. laws regulating the export of our products and technology. In addition, we are required to obtain a license from the U.S. federal government to export certain of our products and technical data as well as to provide technical services to foreign persons related to such products and technical data. We cannot be sure of our ability to obtain any licenses required to export our products or to receive authorization from the U.S. federal government for international sales or domestic sales to foreign persons including transfers of technical data or the provision of technical services. Likewise, our international operations are subject to the export laws of the countries in which they conduct business. Moreover, the export regimes and the governing policies applicable to our business are subject to change. We cannot assure you of the extent that such export authorizations will be available to us, if at all, in the future. If we cannot obtain required government approvals under applicable regulations in a timely manner or at all, we could be delayed or prevented from selling our products in certain jurisdictions, which could adversely affect our business and financial results.

25

Table of Contents

If we are unable to obtain or maintain appropriate government security clearances for our facilities or personnel, we may be precluded from bidding on certain opportunities.
We must comply with security requirements pursuant to the National Industrial Security Program Operating Manual, or NISPOM, and other U.S. government security protocols when accessing sensitive information. Several of our facilities maintain a facility security clearance and many of our employees maintain a personal security clearance in order to access sensitive information necessary to the performance of our work on certain government contracts and subcontracts.  Failure to comply with the NISPOM or other security requirements may subject us to civil or criminal penalties, loss of access to sensitive information, loss of a U.S. government contract or subcontract, or potentially debarment as a government contractor.
If we suffer any data breaches involving the designs, schematics, or source code for our products or other sensitive information, our business and financial results could be adversely affected.
As a leading commercial provider to critical defense programs, our business may be subject to heightened risks of cyber intrusion as nation-state hackers seek access to technology used in U.S. defense programs. Like all DOD contractors that process, store or transmit controlled unclassified information, we must meet DFARS minimum security standards or risk losing our DOD contracts. We securely store our designs, schematics, and source code for our products as they are created. A breach, whether physical, electronic or otherwise, of the systems on which this sensitive data is stored could lead to damage or piracy of our products. If we are subject to data security breaches from external sources or from an insider threat, we may have a loss in sales or increased costs arising from the restoration or implementation of additional security measures, either of which could adversely affect our business and financial results. Other potential costs could include loss of brand value, incident response costs, loss of stock market value, regulatory inquiries, litigation, and management distraction. In addition, a security breach that involved classified information could subject us to civil or criminal penalties, loss of a government contract, loss of access to classified information, or debarment as a government contractor. Similarly, a breach that involved loss of customer-provided data could subject us to loss of a customer, loss of a contract, litigation costs and legal damages, and reputational harm.
The highly-publicized cyber-attack on Sony Pictures Entertainment demonstrates the vulnerability of companies to cyber-attacks and the severe impact these attacks can have. In addition to the potential costs discussed above, the Sony cyber-attack illustrates that such attacks can also damage physical infrastructure (e.g. corrupted servers) and destroy all copies of company intellectual property on a company's network.
We may need to invest in new information technology systems and infrastructure to scale our operations.
We may need to adopt new information technology systems and infrastructure to scale our business and obtain the synergies from prior and future business acquisitions. Our older information technology systems and infrastructure could create product development or production work stoppages, unnecessarily increase our inventory, negatively impact product delivery times and quality, and increase our compliance costs. Failure to invest in newer information technology systems and infrastructure may lead to operational inefficiencies and increased compliance costs and risks. In addition, an inability to maximize the utility and benefit of our current information technology tools could impact our ability to meet cost reduction and planned efficiency and operational improvement goals.
Our income tax provision and other tax liabilities may be insufficient if taxing authorities are successful in asserting tax positions that are contrary to our position. Increases in tax rates could impact our financial performance.
From time to time, we are audited by various federal, state and local authorities regarding income tax matters. Significant judgment is required to determine our provision for income taxes and our liabilities for federal, state, local and other taxes. Although we believe our approach to determining the appropriate tax treatment is supportable and in accordance with relevant authoritative guidance it is possible that the final tax authority will take a tax position that is materially different than that which is reflected in our income tax provision. Such differences could have an adverse effect on our income tax provision or benefit, in the reporting period in which such determination is made and, consequently, on our results of operations, financial position and/or cash flows for such period. Further, future increases in tax rates may adversely affect our financial results.
Provisions in our organizational documents and Massachusetts law and other actions we have taken could make it more difficult for a third party to acquire us.
Provisions of our charter and by-laws could have the effect of discouraging a third party from making a proposal to acquire our company and could prevent certain changes in control, even if some shareholders might consider the proposal to be in their best interest. These provisions include a classified board of directors, advance notice to our board of directors of shareholder proposals and director nominations, and limitations on the ability of shareholders to remove directors and to call shareholder meetings. In addition, we may issue shares of any class or series of preferred stock in the future without shareholder approval upon such terms as our board of directors may determine. The rights of holders of common stock will be subject to, and may be adversely affected by, the rights of the holders of any such class or series of preferred stock that may be issued.

26

Table of Contents

We also are subject to the Massachusetts General Laws which, subject to certain exceptions, prohibit a Massachusetts corporation from engaging in a broad range of business combinations with any “interested shareholder” for a period of three years following the date that such shareholder becomes an interested shareholder. These provisions could discourage a third party from pursuing an acquisition of our company at a price considered attractive by many shareholders.
The Massachusetts Business Corporation Act permits directors to look beyond the interests of shareholders and consider other constituencies in discharging their duties.  In determining what the director of a Massachusetts corporation reasonably believes to be in the best interests of the corporation, a director may consider the interests of the corporation's employees, suppliers, creditors and customers, the economy of the state, the region and the nation, community and societal considerations, and the long-term and short-term interests of the corporation and its shareholders, including the possibility that these interests may be best served by the continued independence of the corporation.  This provision of Massachusetts law could reduce the likelihood that we may be acquired in a transaction that our shareholders consider to be attractive.    
Our profits may decrease and/or we may incur significant unanticipated costs if we do not accurately estimate the costs of fixed-price engagements.
A significant number of our system integration projects are based on fixed-price contracts, rather than contracts in which payment to us is determined on a time and materials or other basis. Our failure to estimate accurately the resources and schedule required for a project, or our failure to complete our contractual obligations in a manner consistent with the project plan upon which our fixed-price contract was based, could adversely affect our overall profitability and could have a material adverse effect on our business, financial condition and results of operations. We are consistently entering into contracts for large projects that magnify this risk. We have been required to commit unanticipated additional resources to complete projects in the past, which has occasionally resulted in losses on those contracts. We will likely experience similar situations in the future. In addition, we may fix the price for some projects at an early stage of the project engagement, which could result in a fixed price that is too low. Therefore, any changes from our original estimates could adversely affect our business, financial condition and results of operations.
The trading price of our common stock may continue to be volatile, which may adversely affect our business, and investors in our common stock may experience substantial losses.
Our stock price, like that of other technology companies, has been volatile. The stock market in general and technology companies in particular may continue to experience volatility. The stock prices for companies in the defense technology industry may continue to remain volatile given the uncertainty and timing of funding for defense programs. This volatility may or may not be related to our operating performance. Our operating results, from time to time, may be below the expectations of public market analysts and investors, which could have a material adverse effect on the market price of our common stock. Our low stock trading volume and small cap status could hamper existing and new shareholders from gaining a meaningful position in our stock. In addition, the continued threat of terrorism in the United States and abroad and the resulting military action and heightened security measures undertaken in response to threats may cause continued volatility in securities markets. Market rumors or the dissemination of false or misleading information may impact our stock price. When the market price of a stock has been volatile, holders of that stock will sometimes issue securities class action litigation against the company that issued the stock. If any shareholders were to issue a lawsuit, we could incur substantial costs defending the lawsuit. Also, the lawsuit could divert the time and attention of management.
We have never paid dividends on our capital stock and we do not anticipate paying any dividends in the foreseeable future. Consequently, any gains from an investment in our common stock will likely depend on whether the price of our common stock increases.
We have not declared or paid cash dividends on any of our classes of capital stock to date and we currently intend to retain our future earnings, if any, to fund the development and growth of our business. As a result, capital appreciation, if any, of our common stock will be your sole source of gain for the foreseeable future. Furthermore, we may in the future become subject to contractual restrictions on, or prohibitions against, the payment of dividends. Consequently, in the foreseeable future, you will likely only experience a gain from your investment in our common stock if the price of our common stock increases. There is no guarantee that our common stock will appreciate in value or even maintain the price at which you purchased your shares, and you may not realize a return on your investment in our common stock.
If our internal controls over financial reporting are not considered effective, our business and stock price could be adversely affected.
Section 404 of the Sarbanes-Oxley Act of 2002 requires us to evaluate the effectiveness of our internal controls over financial reporting as of the end of each fiscal year, and to include a management report assessing the effectiveness of our internal controls over financial reporting in our annual report on Form 10-K for that fiscal year. Section 404 also requires our independent registered public accounting firm to attest to, and report on, management’s assessment of our internal controls over financial reporting.

27

Table of Contents

Our management, including our chief executive officer and chief financial officer, does not expect that our internal controls over financial reporting will prevent or detect all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud involving a company have been, or will be, detected. The design of any system of controls is based in part on certain assumptions about the likelihood of future events, and we cannot assure you that any design will succeed in achieving its stated goals under all potential future conditions. Over time, controls may become ineffective because of changes in conditions or deterioration in the degree of compliance with policies or procedures. In addition, as part of our growth strategy, we may continue to explore acquisitions or strategic alliances that could adversely affect internal control over financial reporting during the integration period until the acquired business has been fully incorporated into our internal control environment. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and may not be detected. We cannot assure you that we or our independent registered public accounting firm will not identify a material weakness in our internal controls in the future. A material weakness in our internal controls over financial reporting would require management and our independent registered public accounting firm to consider our internal controls as ineffective. If our internal controls over financial reporting are not considered effective, we may experience a loss of public confidence, which could have an adverse effect on our business and on the market price of our common stock.
If equity research analysts do not publish research or reports about our business or if they issue unfavorable commentary or downgrade our common stock, the price of our common stock could decline.
The trading market for our common stock relies in part on the research and reports that equity research analysts publish about us and our business. We do not control these analysts. The price of our common stock could decline if one or more equity analysts downgrade our common stock or if analysts issue other unfavorable commentary or cease publishing reports about us or our business.
We may need additional capital and may not be able to raise funds on acceptable terms, if at all. In addition, any funding through the sale of additional common stock or other equity securities could result in additional dilution to our stockholders and any funding through indebtedness could restrict our operations.
We may require additional cash resources to finance our continued growth or other future developments, including any investments or acquisitions we may decide to pursue. The amount and timing of such additional financing needs will vary principally depending on the timing of new product and service launches, investments and/or acquisitions, and the amount of cash flow from our operations. If our resources are insufficient to satisfy our cash requirements, we may seek to sell additional equity or debt securities or obtain a larger credit facility. The sale of additional equity securities or securities convertible into our ordinary shares could result in additional dilution to our stockholders. The incurrence of additional indebtedness would result in increased debt service obligations and could result in operating and financing covenants that would restrict our operations.
Our ability to obtain additional capital on acceptable terms is subject to a variety of uncertainties, including:
investors’ perception of, and demand for, securities of defense technology companies;
conditions of the United States and other capital markets in which we may seek to raise funds;
our future results of operations, financial condition and cash flows; and
prevailing interest rates.
We cannot assure that financing will be available in amounts or on terms acceptable to us, if at all. If we fail to raise additional funds, we may need to sell debt or additional equity securities or to reduce our growth to a level that can be supported by our cash flow. Without additional capital, we may not be able to:
further develop or enhance our customer base;
acquire necessary technologies, products or businesses;
expand operations in the United States and elsewhere;
hire, train and retain employees;
market our software solutions, services and products; or
respond to competitive pressures or unanticipated capital requirements.
ITEM 1B.
UNRESOLVED STAFF COMMENTS
None.

28

Table of Contents

ITEM 2.
PROPERTIES    
The following table sets forth our significant properties as of June 30, 2018: 
Location
 
Size in
Sq. Feet
 
Commitment
Andover, MA
 
145,262
 
Leased, expiring 2029
Hudson, NH
 
100,111
 
Leased, expiring 2024
Phoenix, AZ
 
73,729
 
Leased, expiring 2020
Oxnard, CA
 
72,673
 
Leased, expiring 2025
Fremont, CA
 
53,713
 
Leased, expiring 2023
Cypress, CA
 
42,770
 
Leased, expiring 2021
Geneva, CH
 
27,287
 
Leased, expiring 2027
Camarillo, CA
 
25,017
 
Leased, expiring 2020
The Company actively manages its facilities and is in pursuit of lease extensions or alternative locations for facilities with expiration dates in 2020. In addition, we lease a number of smaller offices around the world primarily for sales. For financial information regarding obligations under our leases, see Note K to the consolidated financial statements.
ITEM 3.
LEGAL PROCEEDINGS
We are subject to litigation, claims, investigations, and audits arising from time to time in the ordinary course of our business. Although legal proceedings are inherently unpredictable, we believe that we have valid defenses with respect to those matters currently pending against us and intend to defend our self vigorously. The outcome of these matters, individually and in the aggregate, is not expected to have a material impact on our cash flows, results of operations, or financial position.
On July 10, 2018, a securities class action complaint was filed against us, Mark Aslett, and Gerald M. Haines II in the U.S. District Court for the District of Massachusetts. The complaint asserts Section 10(b) and 20(a) securities fraud claims on behalf of a purported class of purchasers and sellers of our stock from October 24, 2017 to April 24, 2018.  The complaint alleges that our public disclosures in SEC filings and on earnings calls were false and/or misleading.  We believe the claims in the complaint are without merit and intend to defend our self vigorously.
ITEM 4.
MINE SAFETY DISCLOSURES
Not Applicable.
ITEM 4.1.
EXECUTIVE OFFICERS OF THE REGISTRANT
Our executive officers are appointed to office by the Board of Directors at the first board meeting following the Annual Meeting of Shareholders or at other board meetings as appropriate, and hold office until the first board meeting following the next Annual Meeting of Shareholders and until a successor is chosen, subject to prior death, resignation or removal. Information regarding our executive officers as of the date of filing of this Annual Report on Form 10-K is presented below.
Mark Aslett, age 50, joined Mercury in 2007 and has served as the President and Chief Executive Officer and as a member of the Board since 2007. Prior to joining Mercury, he was Chief Operating Officer and Chief Executive Officer of Enterasys Networks from 2003 to 2006, and held various positions with Marconi plc and its affiliated companies, including Executive Vice President of Marketing, Vice President of Portfolio Management, and President of Marconi Communications- North America, from 1998 to 2002. Mr. Aslett has also held positions at GEC Plessey Telecommunications, as well as other telecommunications-related technology firms.
Christopher C. Cambria, age 60, joined Mercury in 2016 as Senior Vice President, General Counsel, and Secretary and was appointed Executive Vice President, General Counsel, and Secretary in 2017. Prior to joining Mercury, he was Vice President, General Counsel, and Secretary of Aerojet Rocketdyne Holdings, Inc. from 2012 to 2016 and Vice President, General Counsel from 2011 to 2012. He was with L-3 Communications Holdings, Inc. from 1997 through 2009 serving as Senior Vice President and Senior Counsel, Mergers and Acquisitions from 2006 to 2009, Senior Vice President, Secretary and General Counsel from 2001 to 2006, and Vice President, General Counsel and Secretary from 1997 to 2001. Prior to L-3, Mr. Cambria was an Associate with Fried, Frank, Harris, Shriver & Jacobson and Cravath, Swaine & Moore.
Michael D. Ruppert, age 44, joined Mercury in 2014 as Senior Vice President, Strategy and Corporate Development and in 2017 was named Executive Vice President, Strategy and Corporate Development. In 2018 Mr. Ruppert was appointed the Company’s Executive Vice President, Chief Financial Officer and Treasurer. Prior to joining Mercury, from 2013 to 2014, Mr. Ruppert was Co-Founder and Managing Partner of RS Partners, LLC, a boutique advisory firm focused on the aerospace & defense

29


Table of Contents

industries. Prior to that, he was a Managing Director at UBS Investment Bank where he led the defense investment banking practice from 2011 to 2013. Mr. Ruppert also held positions in the investment banking divisions at Lazard Freres & Co from 2008 to 2011 and at Lehman Brothers from 2000 to 2008.
Didier M.C. Thibaud, age 57, joined Mercury in 1995, and has served as our Executive Vice President, Chief Operating Officer since 2016. He served as the President of our Mercury Commercial Electronics business unit from 2012 to 2016 and the President of our Advanced Computing Solutions business unit from 2007 to 2012. Prior to that, he was Senior Vice President, Defense & Commercial Businesses from 2005 to 2007 and Vice President and General Manager, Imaging and Visualization Solutions Group, from 2000 to 2005 and served in various capacities in sales and marketing from 1995 to 2000.

30

Table of Contents

PART II
ITEM 5.
MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
Our common stock is listed and traded on the Nasdaq Global Select Market under the symbol MRCY. The following table sets forth, for the fiscal periods indicated, the high and low sale prices per share for our common stock during such periods. Such market quotations reflect inter-dealer prices without retail markup, markdown or commission.
 
High
 
Low
2018 Fourth quarter
$
49.35

 
$
30.11

  Third quarter
$
52.59

 
$
41.64

  Second quarter
$
55.00

 
$
47.69

  First quarter
$
52.00

 
$
39.96

2017 Fourth quarter
$
43.15

 
$
36.09

  Third quarter
$
40.86

 
$
29.31

  Second quarter
$
32.75

 
$
22.31

  First quarter
$
26.37

 
$
21.52

As of July 31, 2018, we had 312 record shareholders and 20,920 nominee holders.
Dividend Policy
We have never declared or paid cash dividends on shares of our common stock. We currently intend to retain any earnings for future growth. Accordingly, we do not anticipate that any cash dividends will be declared or paid on our common stock in the foreseeable future.
Net Share Settlement Plans
The following table includes information with respect to net share settlements we made of our common stock during the fiscal year ended June 30, 2018:
Period of Net Share Settlement
 
Total Number of Shares Net Settled (1)
 
Average Price Per Share
July 1, 2017 - September 30, 2017
 
295

 
$
46.96

October 1, 2017 - December 31, 2017
 
19

 
$
51.24

January 1, 2018 - March 31, 2018
 
4

 
$
48.16

April 1, 2018 - June 30, 2018
 
11

 
$
34.93

Total
 
329

 
 
(1) Represents shares we net settled in connection with the surrender of shares to cover the minimum taxes on vesting of restricted stock.
Share Repurchase Plans
During fiscal 2018, we had no active share repurchase programs.
Equity Compensation Plans
The information required by this item is incorporated by reference to our Proxy Statement for the Shareholders Meeting.

31

Table of Contents

ITEM 6.
SELECTED FINANCIAL DATA
The following table summarizes certain historical consolidated financial data, restated for discontinued operations, which should be read in conjunction with the consolidated financial statements and related notes included elsewhere in this report (in thousands, except per share data):
 
For the Years Ended June 30,
 
2018
 
2017
 
2016
 
2015
 
2014
Statement of Operations Data:
 
 
 
 
 
 
 
 
 
Net revenues
$
493,184

 
$
408,588

 
$
270,154

 
$
234,847

 
$
208,729

Income (loss) from operations
$
46,985

 
$
37,403

 
$
23,973

 
$
18,355

 
$
(7,405
)
Income (loss) from continuing operations
$
40,883

 
$
24,875

 
$
19,742

 
$
14,429

 
$
(4,072
)
Adjusted EBITDA(1)
$
115,362

 
$
93,921

 
$
57,274

 
$
44,414

 
$
23,522

Net earnings (loss) per share from continuing operations:
 
 
 
 
 
 
 
 
 
Basic
$
0.88

 
$
0.59

 
$
0.58

 
$
0.45

 
$
(0.13
)
Diluted
$
0.86

 
$
0.58

 
$
0.56

 
$
0.44

 
$
(0.13
)
 
As of June 30,
 
2018
 
2017
 
2016
 
2015
 
2014
Balance Sheet Data:
 
 
 
 
 
 
 
 
 
Working capital
$
260,063

 
$
173,351

 
$
177,748

 
$
142,472

 
$
127,375

Total assets
$
1,064,480

 
$
815,745

 
$
736,496

 
$
386,880

 
$
373,712

Long-term obligations
$
220,909

 
$
17,483

 
$
195,808

 
$
3,457

 
$
13,635

Total shareholders’ equity
$
771,891

 
$
725,417

 
$
473,044

 
$
350,138

 
$
327,147

(1)
In our periodic communications, we discuss a key measure that is not calculated according to U.S. generally accepted accounting principles (“GAAP”), adjusted EBITDA. Adjusted EBITDA is defined as income from continuing operations before interest income and expense, income taxes, depreciation, amortization of intangible assets, restructuring and other charges, impairment of long-lived assets, acquisition and financing costs, fair value adjustments from purchase accounting, litigation and settlement income and expense, and stock-based and other non-cash compensation expense. We use adjusted EBITDA as an important indicator of the operating performance of our business. We use adjusted EBITDA in internal forecasts and models when establishing internal operating budgets, supplementing the financial results and forecasts reported to our board of directors, determining components of bonus and equity compensation for executive officers based on operating performance and evaluating short-term and long-term operating trends in our operations. We believe the adjusted EBITDA financial measure assists in providing a more complete understanding of our underlying operational measures to manage our business, to evaluate our performance compared to prior periods and the marketplace, and to establish operational goals. We believe that these non-GAAP financial adjustments are useful to investors because they allow investors to evaluate the effectiveness of the methodology and information used by management in our financial and operational decision-making.
Adjusted EBITDA is a non-GAAP financial measure and should not be considered in isolation or as a substitute for financial information provided in accordance with GAAP. This non-GAAP financial measure may not be computed in the same manner as similarly titled measures used by other companies. We expect to continue to incur expenses similar to the adjusted EBITDA financial adjustments described above, and investors should not infer from our presentation of this non-GAAP financial measure that these costs are unusual, infrequent or non-recurring. See the Non-GAAP Financial Measures section of this annual report for a reconciliation of our adjusted EBITDA to income from continuing operations.
ITEM 7.
MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
FORWARD-LOOKING STATEMENTS
From time to time, information provided, statements made by our employees or information included in our filings with the Securities and Exchange Commission ("SEC") may contain statements that are not historical facts but that are “forward-looking statements,” which involve risks and uncertainties. You can identify these statements by the use of the words “may,” “will,” “could,” “should,” “would,” “plans,” “expects,” “anticipates,” “continue,” “estimate,” “project,” “intend,” “likely,” “forecast,” “probable,”

32

Table of Contents

“potential,” and similar expressions. These forward-looking statements involve risks and uncertainties that could cause actual results to differ materially from those projected or anticipated. Such risks and uncertainties include, but are not limited to, continued funding of defense programs, the timing and amounts of such funding, general economic and business conditions, including unforeseen weakness in the Company’s markets, effects of any U.S. Federal government shutdown or extended continuing resolution, effects of continued geopolitical unrest and regional conflicts, competition, changes in technology and methods of marketing, delays in completing engineering and manufacturing programs, changes in customer order patterns, changes in product mix, continued success in technological advances and delivering technological innovations, changes in, or in the U.S. Government’s interpretation of, federal export control or procurement rules and regulations, market acceptance of the Company's products, shortages in components, production delays or unanticipated expenses due to performance quality issues with outsourced components, inability to fully realize the expected benefits from acquisitions and restructurings, or delays in realizing such benefits, challenges in integrating acquired businesses and achieving anticipated synergies, increases in interest rates, changes to cyber-security regulations and requirements, changes in tax rates or tax regulations, changes to generally accepted accounting principles, difficulties in retaining key employees and customers, unanticipated costs under fixed-price service and system integration engagements, and various other factors beyond our control. These risks and uncertainties also include such additional risk factors as set forth under Part I-Item 1A (Risk Factors) in this Annual Report on Form 10-K. We caution readers not to place undue reliance upon any such forward-looking statements, which speak only as of the date made. We undertake no obligation to update any forward-looking statement to reflect events or circumstances after the date on which such statement is made.
OVERVIEW
Mercury Systems, Inc. is a leading commercial provider of secure sensor and safety critical mission processing subsystems. Optimized for customer and mission success, our solutions power a wide variety of critical defense and intelligence programs. Headquartered in Andover, Massachusetts, we are pioneering a next-generation defense electronics business model designed to meet the industry's current and emerging business needs. We deliver affordable innovative solutions, rapid time-to-value and service and support to our defense prime contractor customers. Our products and solutions have been deployed in more than 300 programs with over 25 different defense prime contractors. Key programs include Aegis, Patriot, Surface Electronic Warfare Improvement Program (“SEWIP”), Gorgon Stare, Predator, F-35, Reaper, F-16 SABR, E2D Hawkeye, Paveway, Filthy Buzzard, Precision Guidance Kit ("PGK"), ProVision, P1, and AIDEWS. Our organizational structure allows us to deliver capabilities that combine technology building blocks and deep domain expertise in the defense sector.
Our technologies and capabilities include secure embedded processing modules and subsystems, mission computers, safety-critical avionics, radio frequency (“RF”) components, multi-function assemblies and subsystems. We utilize leading edge, high performance computing technologies architected by leveraging open standards and open architectures to address highly data-intensive applications that include data signal, sensor and image processing while addressing the packaging challenges, often referred to as “SWaP” (size, weight, and power), that are common in military applications. We have design, development, and manufacturing capabilities in mission computing, safety-critical avionics and platform management. In addition, we design and manufacture RF, microwave and millimeter wave components and subsystems to meet the needs of the radar, electronic warfare (“EW”), signals intelligence (“SIGINT”) and other high bandwidth communications requirements and applications.
We also provide significant capabilities relating to pre-integrated EW, electronic attack (“EA”) and electronic counter measure (“ECM”) subsystems, SIGINT and electro-optical/infrared (“EO/IR”) processing technologies, and radar environment test and simulation systems. We deploy these solutions on behalf of defense prime contractors and the Department of Defense (“DoD”), leveraging commercially available technologies and solutions (or “building blocks”) from our business and other commercial suppliers. We leverage this technology to design and build integrated sensor processing subsystems, often including classified application-specific software and intellectual property (“IP”) for the C4ISR (command, control, communications, computers, intelligence, surveillance and reconnaissance), EW, and ECM markets. We bring significant domain expertise to customers, drawing on over 25 years of experience in EW, SIGINT, and radar environment test and simulation.
Since we conduct much of our business with our defense customers via commercial items, requests by customers are a primary driver of revenue fluctuations from quarter to quarter. Customers specify delivery date requirements that coincide with their need for our products. Because these customers may use our products in connection with a variety of defense programs or other projects of different sizes and durations, a customer’s orders for one quarter generally do not indicate a trend for future orders by that customer. Additionally, order patterns do not necessarily correlate amongst customers and, therefore, we generally cannot identify sequential quarterly trends.
As of June 30, 2018, we had 1,320 employees. During 2018, the growth in our headcount resulted in us exceeding the threshold for qualifying as a "small business" for government contract purposes. The revenues received as a result of small business set aside funding are not considered material.
Our consolidated revenues, net income, earnings per share ("EPS"), adjusted EPS and adjusted EBITDA for fiscal 2018 were $493.2 million, $40.9 million. $0.86, $1.42 and $115.4 million, respectively. See the Non-GAAP Financial Measures section for a reconciliation to our most directly comparable GAAP financial measures.

33

Table of Contents

BUSINESS DEVELOPMENTS:
FISCAL 2018
On February 1, 2018, we acquired Themis Computer ("Themis"). Themis is a leading designer, manufacturer and integrator of commercial, SWaP-optimized rugged servers, computers and storage systems for U.S. and international markets. The acquisition and transaction related expenses were funded with borrowings obtained under our existing revolving credit facility ("the Revolver").
On July 3, 2017, we acquired Richland Technologies, LLC ("RTL"). RTL specializes in safety-critical and high integrity systems, software and hardware development as well as safety-certification services for mission-critical applications, and is a leader in safety-certifiable embedded graphics software for commercial and military aerospace applications. The acquisition and transaction related expenses were funded with cash on hand. The acquisition had an immaterial impact to the Company’s results of operations.
FISCAL 2017
On June 27, 2017, we amended our revolving credit facility ("Revolving Credit Facility"), increasing and extending the facility into a $400.0 million, 5-year revolving credit line expiring in June 2022. In connection with the amendment, we repaid the remaining principal on our term loan using cash on hand. The Revolving Credit Facility remained undrawn at June 30, 2017, other than for outstanding letters of credit.
On April 3, 2017, we acquired Delta Microwave, LLC ("Delta"). Delta is a leading designer and manufacturer of high-value RF, microwave and millimeter wave sub-assemblies and components for the military, aerospace and space markets. The acquisition and transaction related expenses were funded with cash on hand.
On January 26, 2017, we announced the commencement of an underwritten public offering of our common stock, par value $0.01 per share. On February 1, 2017, we closed the offering, including the full over-allotment allocation, selling an aggregate of 6.9 million shares of common stock at a price to the public of $33.00 for total net proceeds of $215.7 million.
On November 4, 2016, we acquired CES Creative Electronic Systems, S.A. ("CES"). Based in Geneva, Switzerland, CES is a leading provider of embedded solutions for military and aerospace mission-critical computing applications. CES specializes in the design, development and manufacture of safety-certifiable product and subsystems solutions including: primary flight control units, flight test computers, mission computers, command and control processors, graphics and video processing and avionics-certified Ethernet and IO. CES has decades of experience designing subsystems deployed in applications certified up to the highest levels of design assurance. CES products and solutions are used on platforms such as aerial refueling tankers and multi-mission aircraft, as well as several types of unmanned platforms.
FISCAL 2016
On May 2, 2016, we acquired the custom microelectronics, RF and microwave solutions, and embedded security operations of Microsemi Corporation (the “Carve-Out Business”), resulting in the entities comprising the Carve-Out Business becoming 100% owned direct or indirect subsidiaries of Mercury (the “Acquisition”).
The Carve-Out Business is a leader in the design, development, and production of sophisticated electronic subsystems and components for use in high-technology products for defense and aerospace markets. The Carve-Out Business’ defense electronics solutions include high-density memory modules, secure solid-state drives, secure GPS receiver modules, high-power RF amplifiers, millimeter-wave modules and subsystems, and specialized software and firmware for anti-tamper applications. The Carve-Out Business’ customers, which include many significant defense prime contractors, outsource many of their electronic design and manufacturing requirements to the Carve-Out Business as a result of its specialized capabilities in packaging electronics for SWaP-constrained environments, its focus on security and the unique requirements of defense applications, and its expertise in RF and microwave technologies. The Carve-Out Business’ products and technologies are used in a variety of defense applications, including missiles and precision munitions, fighter and surveillance aircraft, airport security portals, and advanced electronic systems for radar and EW.
On December 16, 2015, we acquired Lewis Innovative Technologies, Inc. (“LIT”). Embedded systems security has become a requirement for new and emerging military programs, and LIT’s security solutions significantly extend our capabilities and leadership in secure embedded computing, a critical differentiator from our traditional competition. LIT’s solutions, combined with our next-generation secure Intel server-class product line, together with increasingly frequent mandates from the government to secure electronic systems for domestic and foreign military sales, position us well to capitalize on DoD program protection security requirements.

34

Table of Contents

RESULTS OF OPERATIONS:
FISCAL 2018 VS. FISCAL 2017
Results of operations for the twelve month period ended June 30, 2017 includes only results from the acquisition dates for CES and Delta. Results of operations for the twelve month period ended June 30, 2018 includes only results from the acquisition dates for RTL and Themis, which were acquired subsequent to June 30, 2017. Accordingly, the periods presented below are not directly comparable.
The following tables set forth, for the periods indicated, financial data from the consolidated statements of operations:
(In thousands)
Fiscal 2018
 
As a % of
Total Net
Revenue
 
Fiscal 2017
 
As a % of
Total Net
Revenue
Net revenues
$
493,184

 
100.0
 %
 
$
408,588

 
100.0
 %
Cost of revenues
267,326

 
54.2

 
217,045

 
53.1

Gross margin
225,858

 
45.8

 
191,543

 
46.9

Operating expenses:
 
 
 
 
 
 
 
Selling, general and administrative
88,365

 
17.9

 
76,491

 
18.7

Research and development
58,807

 
11.9

 
54,086

 
13.2

Amortization of intangible assets
26,004

 
5.3

 
19,680

 
4.8

Restructuring and other charges
3,159

 
0.7

 
1,952

 
0.5

Acquisition costs and other related expenses
2,538

 
0.5

 
1,931

 
0.5

Total operating expenses
178,873

 
36.3

 
154,140

 
37.7

Income from operations
46,985

 
9.5

 
37,403

 
9.2

Interest income
32

 

 
462

 
0.1

Interest expense
(2,850
)
 
(0.6
)
 
(7,568
)
 
(1.9
)
Other (expense) income, net
(1,594
)
 
(0.3
)
 
771

 
0.2

Income before income taxes
42,573

 
8.6

 
31,068

 
7.6

Tax provision
1,690

 
0.3

 
6,193

 
1.5

Net income
$
40,883

 
8.3
 %
 
$
24,875

 
6.1
 %
REVENUES
(In thousands)
Fiscal 2018
 
As a % of
Total Net
Revenue
 
Fiscal 2017
 
As a % of
Total Net
Revenue
 
$ Change
 
% Change
Organic revenue
$
433,438

 
88
%
 
$
404,632

 
99
%
 
$
28,806

 
7
%
Acquired revenue
59,746

 
12
%
 
3,956

 
1
%
 
55,790

 
1,410
%
Total revenues
$
493,184

 
100
%
 
$
408,588

 
100
%
 
$
84,596

 
21
%
Total revenues increased $84.6 million, or 21%, to $493.2 million during fiscal 2018 compared to $408.6 million during fiscal 2017 including "Acquired revenue" which represents net revenue from acquired businesses that have been part of Mercury for completion of four full quarters or less (and excludes any intercompany transactions). After the completion of four fiscal quarters, acquired businesses will be treated as organic for current and comparable historical periods. The increase in total revenues is primarily attributed to higher revenues associated with the F-35, Aegis, MoDREx, PGK, and E2D Hawkeye programs and the increase of $55.8 million of Acquired revenue. These increases were partially offset by lower revenues from a large ground based radar program.
International revenues, which consist of foreign military sales through the U.S. government, sales to prime defense contractor customers where the end user is known to be outside of the U.S., and direct sales to non-U.S. based customers, increased $16.2 million to $83.1 million during fiscal 2018 compared to $66.9 million during fiscal 2017. International revenues represented 17% and 16% of total revenues during fiscal 2018 and 2017, respectively.
Revenues from Command, Control, Communications, Computers, and Intelligence ("C4I"), Other Sensor and Effector, Radar and Electronic Warfare ("EW") increased by $55.7 million, $20.4 million, $9.3 million and $8.4 million, respectively, during fiscal 2018 as compared to fiscal 2017. The C4I increase was driven primarily by the F-35 program as well as Acquired revenue from

35

Table of Contents

the Themis acquisition, partially offset by lower revenue from the ProVision program. The Other Sensor and Effector increase was driven primarily by the Digital Electronic Warfare System ("DEWS") and Advanced Medium Range Air to Air Missile ("AMRAAM") programs. The Radar increase was primarily driven by the Aegis and E2D Hawkeye programs, partially offset by lower revenues from a large ground based radar program. The EW increase was primarily driven by the MoDREx and Surface Electronic Warfare Improvement Program ("SEWIP") programs, partially offset by lower revenues from the Miniature Air Launched Decoy ("MALD") program. These end application increases were partially offset by a decrease of $9.2 million related to component and other sales where the end use is not specified during fiscal 2018 as compared to fiscal 2017.
Revenues from components, modules and sub-assemblies, and integrated subsystems increased by $37.3 million, $32.8 million, and $14.5 million, respectively, during fiscal 2018 as compared to fiscal 2017. The components increase was driven primarily by the PGK and F-35 programs. The increase in modules and sub-assemblies was driven by the SEWIP and MoDREx programs, partially offset by lower revenues from the DEWS program. The increase in integrated subsystems was primarily due to higher revenues from the Aegis and E2D Hawkeye programs, as well as Acquired revenue from the Themis acquisition, partially offset by lower revenues from a large ground based radar program.
GROSS MARGIN
Gross margin was 45.8% for fiscal 2018, a decrease of 110 basis points from the 46.9% gross margin achieved in fiscal 2017. The lower gross margin in fiscal 2018 was primarily due to lower margin product mix, which was partially offset by lower inventory step-up amortization of $1.7 million related to our acquired businesses compared to fiscal 2017.
SELLING, GENERAL AND ADMINISTRATIVE
Selling, general and administrative expenses increased $11.9 million, or 16%, to $88.4 million during fiscal 2018 as compared to $76.5 million during fiscal 2017. The increase was primarily due to added headcount from our recent acquisitions of Delta, RTL and Themis and higher compensation related costs. Selling, general and administrative expenses decreased as a percentage of revenue to 17.9% during fiscal 2018 from 18.7% during fiscal 2017 due to higher revenues and improved operating leverage in fiscal 2018 compared to fiscal 2017.
RESEARCH AND DEVELOPMENT
Research and development expenses increased $4.7 million, or 9%, to $58.8 million during fiscal 2018 compared to $54.1 million for fiscal 2017. The increase was primarily due to added headcount from our recent acquisitions of Delta, RTL and Themis and higher compensation related costs. These increases were partially offset by increased customer funded development. Research and development expenses accounted for 11.9% and 13.2% of our revenues during fiscal 2018 and fiscal 2017, respectively. The decrease was primarily driven due to higher revenues in fiscal 2018 compared to fiscal 2017.
AMORTIZATION OF INTANGIBLE ASSETS
Amortization of intangible assets increased $6.3 million to $26.0 million during fiscal 2018 compared to $19.7 million for fiscal 2017, primarily due to the full year impact of amortization from the acquisitions of CES and Delta, as well as the amortization from the RTL and Themis acquisitions.
RESTRUCTURING AND OTHER CHARGES
Restructuring and other charges increased $1.2 million, or 62%, to $3.2 million during fiscal 2018 compared to $2.0 million in fiscal 2017. The increase was primarily driven by higher severance costs related to the separation of 38 employees primarily in R&D and operations functions. Fiscal 2017 included severance related activities associated with the closure of our former Manteca, California location and facility related charges from our former Chelmsford, Massachusetts headquarters facility, which was relocated to Andover, Massachusetts during fiscal 2017. Restructuring and other charges are typically related to acquisitions and organizational redesign programs initiated as part of discrete post-acquisition integration activities.
ACQUISITION COSTS AND OTHER RELATED EXPENSES
We incurred $2.5 million of acquisition costs and other related expenses during fiscal 2018, compared to $1.9 million during fiscal 2017. The acquisition costs and other related expenses incurred during fiscal 2018 primarily related to the acquisitions of Themis and RTL during fiscal 2018, as well as expenses associated with the acquisition of Germane Systems ("Germane") in early fiscal 2019. The acquisition costs and other related expenses incurred during fiscal 2017 primarily related to the acquisitions of both CES and Delta. We expect to incur acquisition costs and other related expenses periodically in the future as we continue to seek acquisition opportunities to expand our capabilities within the entire sensor processing chain.
INTEREST INCOME
Interest income decreased to less than $0.1 million in fiscal 2018, compared to $0.5 million in fiscal 2017 due to lower average balances of cash on hand throughout the year.

36

Table of Contents

INTEREST EXPENSE
Interest expense for fiscal 2018 decreased $4.7 million to $2.9 million compared to fiscal 2017 interest expense of $7.6 million. Fiscal 2017 included a $5.8 million cash interest expense and $1.8 million of amortization of debt issuance costs related to the full year impact of our former term loan, which was repaid in the fourth quarter. During fiscal 2018, we incurred $2.9 million in cash interest expense on the Revolver in order to facilitate the acquisition of Themis.
OTHER (EXPENSE) INCOME, NET
Other (expense) income, net decreased $2.4 million to $(1.6) million during fiscal 2018 compared to $0.8 million in fiscal 2017. The increase in other expense, net was primarily due to $2.4 million in financing and registration fees incurred during fiscal 2018 compared to $0.6 million in fiscal 2017. Other income, net in fiscal 2017 includes $0.9 million related to the amortization of the gain on the sale leaseback of our former corporate headquarters. The decrease in other (expense) income, net was offset by $0.6 million foreign exchange gain compared to a $0.3 million gain during the same period in fiscal 2017.
INCOME TAXES
On December 22, 2017, the Tax Cuts and Jobs Act of 2017 (the “Tax Act”) was enacted by the U.S. government. The Tax Act has impacted the U.S. corporate tax rate that we will use going forward, which has been reduced to 21% from 35%. As we have a June 30 fiscal year-end, the lower U.S. corporate tax rate will be phased in, resulting in a U.S. corporate tax rate of approximately 28% for our fiscal year ending June 30, 2018, and 21% for subsequent fiscal years. In addition to the reduced U.S. corporate tax rate we also expect to benefit from the immediate deduction for certain new investments. The Tax Act also includes items that we expect will increase our tax expense including, but not limited to, the elimination of the domestic manufacturing deduction and increased limitations on deductions for executive compensation. To transition to the reduced U.S. corporate tax rate, adjustments were required to be made to our U.S. deferred tax assets and liabilities, as well as discrete tax items recorded prior to the Tax Act. For the year ended June 30, 2018, these adjustments resulted in a tax benefit of $0.9 million. The Tax Act also provided for a one-time deemed mandatory repatriation of post-1986 undistributed foreign subsidiary earnings and profits (“E&P”) through December 31, 2017. We had an estimated $5.6 million of undistributed foreign E&P subject to the deemed mandatory repatriation and recognized a provisional $0.8 million of income tax expense for the year ended June 30, 2018. The actual effective tax rate may be materially different than the U.S. corporate tax rate (including being higher) based on the availability and impact of various other adjustments including but not limited to state taxes, Federal research and development credits, discrete tax benefits related to stock compensation, and the inclusion or exclusion of various items in taxable income which may differ from GAAP income.
The effective tax rate for fiscal 2018 differed from the federal statutory rate primarily due to benefits related to research and development tax credits, domestic manufacturing deductions, excess tax benefits for equity compensation, and acquired tax attributes. These benefits are partially offset by additional tax expense for state and local income taxes, non-deductible officer compensation and non-deductible equity compensation. During fiscal 2018 and 2017, we recognized a discrete tax benefit of $7.9 million and $4.1 million, respectively, related to excess tax benefits on stock-based compensation. The discrete tax benefit for fiscal 2018 included the enactment of the Tax Act. The benefit is the result of the increase in value from the stock award between the grant date and the vest date. Fiscal 2018 also included discrete tax benefits of $3.7 million derived from new information obtained about net operating loss carry-forwards of the Carve-Out Business acquired from Microsemi Corporation in May 2016. The discrete items disclosed above for fiscal 2018 included the effect of the Tax Act.
Within the calculation of our annual effective tax rate we have used assumptions and estimates that may change as a result of future guidance and interpretation from the Internal Revenue Service, the SEC, and the FASB. The Tax Act contains many significant changes to the U.S. tax laws, the consequences of which have not yet been fully determined, primarily related to the changes in the taxation of foreign earnings and the deductibility of expenses. These changes contained in the Tax Act could have a material impact on our future U.S. tax expense.
FISCAL 2017 VS. FISCAL 2016
Results of operations for the twelve month period ended June 30, 2016 does not include results for CES and Delta since both businesses were acquired subsequent to June 30, 2016 and includes only two months results for the Carve-Out Business. Accordingly, the periods presented below are not directly comparable.

37

Table of Contents

The following tables set forth, for the periods indicated, financial data from the consolidated statement of operations: 
(In thousands)
Fiscal 2017
 
As a % of
Total Net
Revenue
 
Fiscal 2016
 
As a % of
Total Net
Revenue
Net revenues
$
408,588

 
100.0
 %
 
$
270,154

 
100.0
 %
Cost of revenues
217,045

 
53.1

 
142,535

 
52.8

Gross margin
191,543

 
46.9

 
127,619

 
47.2

Operating expenses:
 
 
 
 
 
 
 
Selling, general and administrative
76,491

 
18.7

 
52,952

 
19.6

Research and development
54,086

 
13.2

 
36,388

 
13.4

Amortization of intangible assets
19,680

 
4.8

 
8,842

 
3.2

Restructuring and other charges
1,952

 
0.5

 
1,240

 
0.5

Impairment of long-lived assets

 

 
231

 
0.1

Acquisition costs and other related expenses
1,931

 
0.5

 
3,993

 
1.5

Total operating expenses
154,140

 
37.7

 
103,646

 
38.3

Income from operations
37,403

 
9.2

 
23,973

 
8.9

Interest income
462

 
0.1

 
131

 

Interest expense
(7,568
)
 
(1.9
)
 
(1,172
)
 
(0.4
)
Other income, net
771

 
0.2

 
2,354

 
0.9

Income before income taxes
31,068

 
7.6

 
25,286

 
9.4

Tax provision
6,193

 
1.5

 
5,544

 
2.1

Net income
$
24,875

 
6.1
 %
 
$
19,742

 
7.3
 %
REVENUES
(In thousands)
Fiscal 2017
 
As a % of
Total Net
Revenue
 
Fiscal 2016
 
As a % of
Total Net
Revenue
 
$ Change
 
% Change
Organic revenue
$
277,699

 
68
%
 
$
253,516

 
94
%
 
$
24,183

 
10
%
Acquired revenue
130,889

 
32
%
 
16,638

 
6
%
 
114,251

 
687
%
Total revenues
$
408,588

 
100
%
 
$
270,154

 
100
%
 
$
138,434

 
51
%
Total revenues increased $138.4 million, or 51%, to $408.6 million during fiscal 2017 compared to $270.2 million during fiscal 2016 including "Acquired revenue" which represents net revenue from acquired businesses that have been part of Mercury for completion of four full quarters or less (which excludes any intercompany transactions). After the completion of four fiscal quarters, acquired businesses will be treated as organic for current and comparable historical periods. The increase in total revenues is primarily attributed to higher revenues associated with a large ground based radar program and ProVision program and the increase of $114.3 million of Acquired revenue. International revenues, which consist of foreign military sales through prime defense contractor customers and direct sales to non-U.S. based customers, increased by $17.0 million to $66.9 million during fiscal 2017 compared to $49.9 million during fiscal 2016. International revenues represented 16% and 19% of total revenues during fiscal 2017 and 2016, respectively.
GROSS MARGIN
Gross margin was 46.9% for fiscal 2017, a decrease of 30 basis points from the 47.2% gross margin achieved in fiscal 2016. The lower gross margin in fiscal 2017 was primarily due to inventory step-up amortization related to the Carve-Out Business, CES and Delta of $2.8 million, $0.7 million, and $0.2 million, respectively, partially offset by production cost efficiencies and acquisition integration synergies, as well as the continuing ramp up of our insourced U.S. manufacturing operations. The remaining $0.6 million of inventory step-up was amortized into cost of goods sold over the first four months of fiscal 2018.
SELLING, GENERAL AND ADMINISTRATIVE
Selling, general and administrative expenses increased $23.5 million, or 44%, to $76.5 million during fiscal 2017 as compared to $53.0 million during fiscal 2016. The increase was primarily due to increased headcount driven by the full year impact of the Carve-Out Business, as well as the acquisitions of CES and Delta in the second and fourth quarters of fiscal 2017, respectively,

38

Table of Contents

and higher compensation related costs. Selling, general and administrative expenses decreased as a percentage of revenue to 18.7% during fiscal 2017 from 19.6% during fiscal 2016 due to higher revenues in fiscal 2017.
RESEARCH AND DEVELOPMENT
Research and development expenses increased $17.7 million, or 49%, to $54.1 million during fiscal 2017 compared to $36.4 million for fiscal 2016. The increase was primarily due to increased headcount from the full year impact of the Carve-Out Business, as well as the acquisitions of CES and Delta in the second and fourth quarters of fiscal 2017, respectively. The increase was also due to higher compensation related costs, partially offset by increased customer funded development. Research and development expenses accounted for 13.2% and 13.4% of our revenues during fiscal 2017 and fiscal 2016, respectively.
AMORTIZATION OF INTANGIBLE ASSETS
Amortization of intangible assets increased $10.9 million to $19.7 million during fiscal 2017 compared to $8.8 million for fiscal 2016, primarily due to the full year impact of amortization from the acquisition of the Carve-Out Business, as well as the amortization from CES and Delta acquisitions.
RESTRUCTURING AND OTHER CHARGES
Restructuring and other charges increased $0.7 million, or 58%, to $1.9 million during fiscal 2017 compared to $1.2 million in fiscal 2016. The increase was driven by the severance related activities associated with the closure of our Manteca, California facility in fiscal 2018. We also incurred facility related charges through April 2017, as we were unable to sublease the unoccupied portion of our former Chelmsford, Massachusetts headquarters facility. We relocated our headquarters to Andover, Massachusetts in March 2017. Restructuring and other charges are typically related to acquisitions and organizational redesign programs initiated as part of discrete post-acquisition integration activities.
IMPAIRMENT OF LONG-LIVED ASSETS
We had no impairment charges during fiscal 2017, compared to an impairment charge of $0.2 million related to a pre-existing LIT relationship during fiscal 2016.
ACQUISITION COSTS AND OTHER RELATED EXPENSES
We incurred $1.9 million of acquisition costs and other related expenses during fiscal 2017, compared to $4.0 million during fiscal 2016. The acquisition costs and other related expenses incurred during fiscal 2017 relate to the acquisitions of both CES and Delta. $2.0 million of the fiscal 2016 costs related to the acquisition of the Carve-Out Business.
INTEREST INCOME
Interest income increased to $0.5 million in fiscal 2017, compared to $0.1 million in fiscal 2016 due to higher average balances of cash on hand throughout the year.
INTEREST EXPENSE
Interest expense for fiscal 2017 increased $6.4 million to $7.6 million compared to $1.2 million in fiscal 2016. The increase was driven by $5.8 million cash interest expense and $1.8 million of amortization of debt issuance costs related to our term loan, which was entered into during the fourth quarter of fiscal 2016, and repaid during June 2017 as noted above.
OTHER INCOME, NET
Other income, net decreased $1.6 million to $0.8 million during fiscal 2017 compared to $2.4 million in fiscal 2016. During fiscal 2016 we realized $1.9 million gain on the settlement of escrow litigation, which was associated with our fiscal 2012 acquisition of KOR Electronics. Other income includes $0.9 million and $1.2 million related to the amortization of the gain on the sale leaseback of our former corporate headquarters during fiscal 2017 and fiscal 2016, respectively. In fiscal 2017, we realized $0.3 million foreign exchange gain compared to $0.2 million loss during the same period in fiscal 2016. We incurred bank operating fees of $0.6 million and $0.4 million during fiscal 2017 and 2016, respectively.
INCOME TAXES
We recorded an income tax provision of $6.2 million in fiscal 2017 compared to $5.5 million in fiscal 2016. The effective tax rates for fiscal 2017 and fiscal 2016 were 19.9% and 21.9%, respectively.
Our effective tax rate for fiscal 2017 differed from the federal statutory rate primarily due to benefits related to research and development tax credits, domestic manufacturing deductions, excess tax benefits for equity compensation and releases for reserves for tax contingencies, partially offset by non-deductible equity compensation.

39

Table of Contents

The difference in the effective tax rates between fiscal 2017 and fiscal 2016 is mainly driven by additional excess tax benefits for equity compensation, and a portion of the legal settlement of the escrow litigation associated with our acquisition of KOR Electronics that was classified as a reduction of cost basis in an investment for income tax purposes which occurred in fiscal 2016.
LIQUIDITY AND CAPITAL RESOURCES
Our primary sources of liquidity come from existing cash and cash generated from operations, our revolving credit facility and our ability to raise capital under our universal shelf registration statement. Our near-term fixed commitments for cash expenditures consist primarily of payments under operating leases and inventory purchase commitments. We do not currently have any material commitments for capital expenditures. We plan to invest in improvements to our new facilities during fiscal 2019.
Based on our current plans and business conditions, we believe that existing cash and cash equivalents, our available revolving credit facility, cash generated from operations, and our financing capabilities will be sufficient to satisfy our anticipated cash requirements for at least the next twelve months.
Shelf Registration Statement
On August 28, 2017, we filed a shelf registration statement on Form S-3ASR with the SEC. The shelf registration statement, which was effective upon filing with the SEC, registered each of the following securities: debt securities, preferred stock, common stock, warrants and units. We intend to use the proceeds from financings using the shelf registration statement for general corporate purposes, which may include the following:
the acquisition of other companies or businesses;
the repayment and refinancing of debt;
capital expenditures;
working capital; and
other purposes as described in the prospectus supplement.
We have an unlimited amount available under the shelf registration statement. Additionally, as part of the shelf registration statement, we have entered into an equity distribution agreement which allows us to sell an aggregate of up to $200.0 million of our common stock from time to time through our agents. The actual dollar amount and number of shares of common stock we sell pursuant to the equity distribution agreement will be dependent on, among other things, market conditions and our fund raising requirements. The agents may sell the common stock by any method deemed to be an “at the market offering” as defined in Rule 415 of the Securities Act of 1933, as amended, including without limitation sales made directly on NASDAQ, on any other existing trading market for the common stock or to or through a market maker. In addition, our common stock may be offered and sold by such other methods, including privately negotiated transactions, as we and the agents may agree.
Follow-on Equity Offerings
On January 26, 2017, we announced the commencement of an underwritten public offering of our common stock, par value $0.01 per share. On February 1, 2017, we closed the offering, including the full over-allotment allocation, selling an aggregate of 6.9 million shares of common stock at a price to the public of $33.00 for total net proceeds of $215.7 million.
Revolving Credit Facilities
In June 2017, we amended the Revolver, increasing and extending it into a $400.0 million, 5-year revolving credit line expiring in June 2022. In connection with the amendment, we repaid the remaining outstanding principal and interest on our term loan using cash on hand. To facilitate the acquisition of Themis, we drew $195.0 million from the Revolver, with the higher amount reflecting an estimated adjustment for working capital. See Note L in the accompanying consolidated financial statements for further discussion of the Revolver.
Accounts Receivable Factoring
On December 21, 2017, we executed a Master Receivables Purchase Agreement (the “Purchase Agreement”) with Bank of America, N.A. (the “Bank”) for the sale of certain eligible accounts receivable balances of the Company, up to a maximum of $30.0 million. Factoring under the Purchase Agreement is treated as a true sale of accounts receivable by us. We have continued involvement in servicing accounts receivable under the Purchase Agreement, but have no significant retained interests related to the factored accounts receivable.
Proceeds from amounts factored are recorded as an increase to cash and a reduction to accounts receivable outstanding in the consolidated balance sheets. Cash flows attributable to factoring are reflected as cash flows from operating activities in our consolidated statements of cash flows. Factoring fees are included as selling, general, and administrative expenses in the Company’s consolidated statements of operations and comprehensive income.

40

Table of Contents

We factored accounts receivable and incurred factoring fees of $18.8 million and $0.1 million, respectively, during the second quarter of fiscal 2018. We did not factor any accounts receivable or incur any factoring fees during the second half of fiscal 2018.
CASH FLOWS
 
For the Years Ended June 30,
(In thousands)
June 30, 2018
 
June 30, 2017
 
June 30, 2016
Net cash provided by operating activities
$
43,321

 
$
59,146

 
$
36,940

Net cash used in investing activities
$
(200,877
)
 
$
(111,087
)
 
$
(318,208
)
Net cash provided by financing activities
$
182,937

 
$
11,338

 
$
284,894

Net increase (decrease) in cash and cash equivalents
$
24,884

 
$
(40,054
)
 
$
4,105

Cash and cash equivalents at end of year
$
66,521

 
$
41,637

 
$
81,691

Our cash and cash equivalents increased by $24.9 million during fiscal 2018 primarily as the result of $43.3 million provided by operating activities and net borrowings under the credit facility of $195.0 million. These increases were offset by $185.4 million used in acquisition activities, $15.5 million used in the retirement of common stock used to settle individual employees' tax liabilities associated with vesting of restricted stock awards and $15.1 million invested in purchases of property and equipment.
Operating Activities
During fiscal 2018, we generated $43.3 million in cash from operating activities compared to $59.1 million in cash generated from operating activities in fiscal 2017. The decrease was primarily a result of higher cash uses for income tax payables, accounts payables, accounts receivables and inventory. The decrease was partially offset by higher comparable net income, additional depreciation and amortization expense and deferred revenues and customer advances.
During fiscal 2017, we generated $59.1 million in cash from operating activities compared to $36.9 million in cash generated from operating activities in fiscal 2016. The increase was primarily a result of less cash used for income taxes payable as well as increased collections from accounts receivable. This increase was partially offset by higher cash uses for inventory purchases and a lower source of cash for accounts payable and accrued expenses.
Investing Activities
During fiscal 2018, we used cash of $200.9 million in investing activities compared to $111.1 million used during fiscal 2017. The increase was primarily driven by $185.4 million used in the acquisitions of Themis and RTL, during fiscal 2018 compared to $77.8 million primarily used in the acquisitions of CES and Delta during fiscal 2017. The increase in cash used for investing activities was partially offset by decreased purchases of property and equipment of $17.7 million.
During fiscal 2017, we used cash of $111.1 million in investing activities compared to $318.2 million used during fiscal 2016. The decrease is primarily due to the acquisition of the Carve-Out Business for $300.0 million during fiscal 2016 compared to $77.8 million primarily used in the acquisitions of CES and Delta during fiscal 2017. The decrease in cash used for investing activities was partially offset by increased purchases of property and equipment of $25.0 million.
Financing Activities
During fiscal 2018, we had $195.0 million of net borrowings that were drawn against the Revolver. These net borrowings were offset by $15.5 million in payments related to the retirement of common stock used to settle employees’ tax liabilities associated with vesting of restricted stock awards. As a result of these activities, we generated net cash of $182.9 million from financing activities during fiscal 2018.
During fiscal 2017, we closed a follow on offering which generated $215.7 million of cash.  We utilized a portion of these proceeds to pay down the remaining principal balance of the term loan. As a result of these activities, we generated net cash of $11.3 million from financing activities during fiscal 2017.
COMMITMENTS AND CONTRACTUAL OBLIGATIONS
The following is a schedule of our commitments and contractual obligations outstanding at June 30, 2018:
(In thousands)
Total
 
Less Than
1 Year
 
1-3
Years
 
3-5
Years
 
More Than
5 Years
Operating leases
$
62,612

 
$
8,790

 
$
16,762

 
$
14,196

 
$
22,864

Purchase obligations
50,285

 
50,285

 

 

 

 
$
112,897

 
$
59,075

 
$
16,762

 
$
14,196

 
$
22,864


41

Table of Contents

Purchase obligations represent open non-cancelable purchase commitments for certain inventory components and services used in normal operations. The purchase commitments covered by these agreements are for less than one year and aggregated $50.3 million at June 30, 2018.
We have a liability at June 30, 2018 of $1.0 million for uncertain tax positions that have been taken or are expected to be taken in various income tax returns. We do not know the ultimate resolution of these uncertain tax positions and as such, do not know the ultimate timing of payments related to this liability. Accordingly, these amounts are not included in the above table.
Our standard product sales and license agreements entered into in the ordinary course of business typically contain an indemnification provision pursuant to which we indemnify, hold harmless, and agree to reimburse the indemnified party for losses suffered or incurred by the indemnified party in connection with certain intellectual property infringement claims by any third party with respect to our products. Such provisions generally survive termination or expiration of the agreements. The potential amount of future payments we could be required to make under these indemnification provisions is, in some instances, unlimited.
As part of our strategy for growth, we continue to explore acquisitions or strategic alliances. The associated acquisition costs incurred in the form of professional fees and services may be material to the future periods in which they occur, regardless of whether the acquisition is ultimately completed.
We may elect from time to time to purchase and subsequently retire shares of common stock in order to settle individual employees’ tax liability associated with vesting of restricted stock awards. These transactions would be treated as a use of cash in financing activities in our statement of cash flows.
OFF-BALANCE SHEET ARRANGEMENTS
Other than our lease commitments incurred in the normal course of business and certain indemnification provisions, we do not have any off-balance sheet financing arrangements or liabilities, guarantee contracts, retained or contingent interests in transferred assets, or any obligation arising out of a material variable interest in an unconsolidated entity. We do not have any majority-owned subsidiaries that are not consolidated in the financial statements. Additionally, we do not have an interest in, or relationships with, any special purpose entities.
RELATED PARTY TRANSACTIONS
During fiscal 2018 and 2017, we did not engage in any related party transactions.
NON-GAAP FINANCIAL MEASURES
In our periodic communications, we discuss certain important measures that are not calculated according to U.S. generally accepted accounting principles (“GAAP”), including adjusted EBITDA, adjusted income from continuing operations, adjusted earnings per share ("adjusted EPS") and free cash flow.
Adjusted EBITDA is defined as income from continuing operations before interest income and expense, income taxes, depreciation, amortization of intangible assets, restructuring and other charges, impairment of long-lived assets, acquisition and financing costs, fair value adjustments from purchase accounting, litigation and settlement income and expense, and stock-based and other non-cash compensation expense. We use adjusted EBITDA as an important indicator of the operating performance of our business. We use adjusted EBITDA in internal forecasts and models when establishing internal operating budgets, supplementing the financial results and forecasts reported to our board of directors, determining a component of bonus and equity compensation for executive officers based on operating performance and evaluating short-term and long-term operating trends in our operations. We believe the adjusted EBITDA financial measure assists in providing a more complete understanding of our underlying operational measures to manage our business, to evaluate our performance compared to prior periods and the marketplace, and to establish operational goals. We believe that these non-GAAP financial adjustments are useful to investors because they allow investors to evaluate the effectiveness of the methodology and information used by management in our financial and operational decision-making.
Adjusted EBITDA is a non-GAAP financial measure and should not be considered in isolation or as a substitute for financial information provided in accordance with GAAP. This non-GAAP financial measure may not be computed in the same manner as similarly titled measures used by other companies. We expect to continue to incur expenses similar to the adjusted EBITDA financial adjustments described above, and investors should not infer from our presentation of this non-GAAP financial measure that these costs are unusual, infrequent or non-recurring.

42

Table of Contents

The following table reconciles our income from continuing operations, the most directly comparable GAAP financial measure, to our adjusted EBITDA:
 
Year Ended June 30,
(In thousands)
2018
 
2017
 
2016
Income from continuing operations
$
40,883

 
$
24,875

 
$
19,742

Interest expense, net
2,818

 
7,106

 
1,041

Tax provision
1,690

 
6,193

 
5,544

Depreciation
16,273

 
12,589

 
6,900

Amortization of intangible assets
26,004

 
19,680

 
8,842

Restructuring and other charges (1)
3,159

 
1,952

 
1,240

Impairment of long-lived assets

 

 
231

Acquisition and financing costs
4,928

 
2,389

 
4,701

Fair value adjustments from purchase accounting (2)
1,992

 
3,679

 
1,384

Litigation and settlement expense (income), net

 
117

 
(1,925
)
Stock-based and other non-cash compensation expense
17,615

 
15,341

 
9,574

Adjusted EBITDA
$
115,362

 
$
93,921

 
$
57,274

(1) Restructuring and other charges are typically related to acquisitions and organizational redesign programs initiated as part of discrete post-acquisition integration activities. We believe these items are non-routine and may not be indicative of ongoing operating results.
(2) Fair value adjustments from purchase accounting for fiscal year 2018 relate to Themis, CES and Delta inventory step-up amortization. Fair value adjustments from purchase accounting for fiscal year 2017 relate to the Carve-Out Business, CES and Delta inventory step-up amortization. Fair value adjustments from purchase accounting for fiscal year 2016 relate to the Carve-Out Business inventory step-up amortization.
Adjusted income from continuing operations and adjusted EPS exclude the impact of certain items and, therefore, have not been calculated in accordance with GAAP. We believe that exclusion of these items assists in providing a more complete understanding of our underlying results and trends and allows for comparability with our peer company index and industry. We use these measures along with the corresponding GAAP financial measures to manage our business and to evaluate our performance compared to prior periods and the marketplace. We define adjusted income from continuing operations as income before amortization of intangible assets, restructuring and other charges, impairment of long-lived assets, acquisition and financing costs, fair value adjustments from purchase accounting, litigation and settlement income and expense, and stock-based compensation and other non-cash compensation expense. The impact to income taxes includes the impact to the effective tax rate, current tax provision and deferred tax provision. Adjusted EPS expresses adjusted income on a per share basis using weighted average diluted shares outstanding.
Adjusted income from continuing operations and adjusted EPS are non-GAAP financial measures and should not be considered in isolation or as a substitute for financial information provided in accordance with GAAP. These non-GAAP financial measures may not be computed in the same manner as similarly titled measures used by other companies. We expect to continue to incur expenses similar to the adjusted income from continuing operations and adjusted EPS financial adjustments described above, and investors should not infer from our presentation of these non-GAAP financial measures that these costs are unusual, infrequent or non-recurring.

43

Table of Contents

The following table reconciles income from continuing operations and diluted earnings per share, the most directly comparable GAAP measures, to adjusted income from continuing operations and adjusted EPS:
 
Year Ended June 30,
(In thousands, except per share data)
2018
 
2017
 
2016
Income from continuing operations and diluted earnings per share
$
40,883

 
$
0.86

 
$
24,875

 
$
0.58

 
$
19,742

 
$
0.56

   Amortization of intangible assets
26,004

 
 
 
19,680

 
 
 
8,842

 
 
   Restructuring and other charges (1)
3,159

 
 
 
1,952

 
 
 
1,240

 
 
   Impairment of long-lived assets

 
 
 

 
 
 
231

 
 
   Acquisition and financing costs
4,928

 
 
 
2,389

 
 
 
4,701

 
 
   Fair value adjustments from purchase accounting (2)
1,992

 
 
 
3,679

 
 
 
1,384

 
 
   Litigation and settlement expense (income), net

 
 
 
117

 
 
 
(1,925
)
 
 
   Stock-based and other non-cash compensation expense
17,615

 
 
 
15,341

 
 
 
9,574

 
 
   Impact to income taxes (3)
(27,269
)
 
 
 
(18,602
)
 
 
 
(9,975
)
 
 
Adjusted income from continuing operations and adjusted earnings per share
$
67,312

 
$
1.42

 
$
49,431

 
$
1.15

 
$
33,814

 
$
0.96

 
 
 
 
 
 
 
 
 
 
 
 
Diluted weighted-average shares outstanding
 
 
47,471

 
 
 
43,018

 
 
 
35,097


(1) Restructuring and other charges are typically related to acquisitions and organizational redesign programs initiated as part of discrete post-acquisition integration activities. We believe these items are non-routine and may not be indicative of ongoing operating results.
(2) Fair value adjustments from purchase accounting for fiscal year 2018 relate to Themis, CES and Delta inventory step-up amortization. Fair value adjustments from purchase accounting for fiscal year 2017 relate to the Carve-Out Business, CES and Delta inventory step-up amortization. Fair value adjustments from purchase accounting for fiscal year 2016 relate to the Carve-Out Business inventory step-up amortization.
(3) Impact to income taxes is calculated by recasting income before income taxes to include the add-backs involved in determining adjusted income and recalculating the income tax provision using this adjusted income from continuing operations before income taxes. The impact to income taxes includes the impact to the effective tax rate, current tax provision and deferred tax provision.
Free cash flow, a non-GAAP measure for reporting cash flow, is defined as cash provided by operating activities less capital expenditures for property and equipment, which includes capitalized software development costs. We believe free cash flow provides investors with an important perspective on cash available for investments and acquisitions after making capital investments required to support ongoing business operations and long-term value creation. We believe that trends in our free cash flow can be valuable indicators of our operating performance and liquidity.
Free cash flow is a non-GAAP financial measure and should not be considered in isolation or as a substitute for financial information provided in accordance with GAAP. This non-GAAP financial measure may not be computed in the same manner as similarly titled measures used by other companies. We expect to continue to incur expenditures similar to the free cash flow adjustment described above, and investors should not infer from our presentation of this non-GAAP financial measure that these expenditures reflect all of our obligations which require cash.
The following table reconciles cash provided by operating activities, the most directly comparable GAAP financial measure, to free cash flow:
 
Year Ended June 30,
(In thousands)
2018
 
2017
 
2016
Cash provided by operating activities
$
43,321

 
$
59,146

 
$
36,940

Capital expenditures
(15,106
)
 
(32,844
)
 
(7,885
)
Free cash flow
$
28,215

 
$
26,302

 
$
29,055

CRITICAL ACCOUNTING POLICIES AND SIGNIFICANT JUDGMENTS AND ESTIMATES
We have identified the policies discussed below as critical to understanding our business and our results of operations. The impact and any associated risks related to these policies on our business operations are discussed throughout Management’s Discussion and Analysis of Financial Condition and Results of Operations where such policies affect our reported and expected financial results. We believe the following critical accounting policies to be those most important to the portrayal of our financial position and results of operations and those that require the most subjective judgment.

44

Table of Contents

REVENUE RECOGNITION
We recognize revenue using three different types of accounting methods: ship and bill, multiple-deliverable arrangements and contract accounting which encompass the percentage of completion, completed contract and time and materials methods. Ship and bill revenues, multiple-deliverable arrangements and contract accounting revenues totaled 44%, 35%, and 21% of total Company revenues in fiscal 2018, respectively.
Revenue from system sales is recognized upon shipment utilizing the ship and bill method provided that title and risk of loss have passed to the customer, there is persuasive evidence of an arrangement, the sales price is fixed or determinable, collection of the related receivable is reasonably assured, and customer acceptance criteria, if any, have been successfully demonstrated.
For multiple-deliverable revenue arrangements that may include a combination of hardware components, related integration or other services, we allocate revenue to each deliverable based on its relative fair value. We generally determine relative selling price using best estimate of the selling price (“BESP”). We determine BESP for each deliverable using a bottoms-up cost plus expected margin approach. Each deliverable within our multiple-deliverable revenue arrangement is accounted for as a separate unit of accounting if the delivered item or items have value to the customer on a standalone basis. We consider a deliverable to have standalone value if the item is sold separately by us or another vendor or if the item could be resold by the customer.
We also have long term production type contracts that are primarily fixed-price for which we apply the percentage-of-completion method for revenue recognition. These long-term contracts involve the design, development, manufacture, or modification of complex electronic equipment and related services. Under this method, revenue is recognized based on the extent of progress towards completion of the long-term contract.
Application of the percentage-of-completion method requires significant judgment relative to estimating total contract costs, including assumptions relative to the length of time to complete the contract, the nature and complexity of the work to be performed, labor productivity, anticipated increases in wages and prices for subcontractor services and materials, the availability of our subcontractor’s services and materials, the availability and timing of funding from our customer, and overhead rates, among other variables. We primarily use the cost-to-cost measure of progress for our long-term contracts. Under the cost-to-cost measure of progress, the extent of progress towards completion is measured based on the ratio of costs incurred to date to the total estimated costs at completion of the contracts. Our estimates are based upon the professional knowledge and experience of our engineers, program managers and finance professionals, who review each long-term contract monthly to assess the contract's schedule, performance, technical matters and estimated cost at completion.
A cancellation, schedule delay, or modification of a fixed-price contract which is accounted for using the percentage-of-completion method may adversely affect our gross margins for the period in which the contract is modified or canceled. Changes in estimates are applied retrospectively and when adjustments in estimated contract costs are identified in the ordinary course of business, such revisions may result in current period adjustments to earnings applicable to performance in prior periods. For time and materials contracts, revenue reflects the number of direct labor hours expended in the performance of a contract multiplied by the contract billing rate, as well as reimbursement of other billable direct costs. The completed contract method is utilized when reasonable and reliable cost estimates for a project cannot be made.
Our analysis of these contracts also contemplates whether contracts should be combined or segmented in accordance with the applicable criteria under GAAP. We combine closely related contracts when all the applicable criteria under GAAP are met. The combination of two or more contracts requires judgment in determining whether the intent of entering into the contracts was effectively to enter into a single project, which should be combined to reflect an overall profit rate. Similarly, we may segment a project, which may consist of a single contract or group of contracts, with varying rates of profitability, only if the applicable criteria under GAAP are met. Judgment also is involved in determining whether a single contract or group of contracts may be segmented based on how the arrangement was negotiated and the performance criteria. The decision to combine a group of contracts or segment a contract could change the amount of revenue and gross profit recorded in a given period. For all types of contracts, we recognize anticipated contract losses as soon as they become known and estimable. These losses are recognized in advance of contract performance and as of June 30, 2018, approximately $0.4 million of these costs were in accrued expenses on our balance sheet.
We do not provide our customers with rights of product return, other than those related to warranty provisions that permit repair or replacement of defective goods. We accrue for anticipated warranty costs upon product shipment. Our payment terms generally range from 30 to 90 days from invoice date based on the nature of the contracts, customers' geographic locations and customer type.
We define service revenues as revenue from activities that are not associated with the design, development, production, or delivery of tangible assets, software or specific capabilities sold by us. Examples of our service revenues include: analyst services and systems engineering support, consulting, maintenance and other support, testing and installation. We combine our product and service revenues into a single class as services revenues are less than 10 percent of total revenues.

45

Table of Contents

INVENTORY VALUATION
We value our inventory at the lower of cost (first-in, first-out) or its net realizable value. We write down inventory for excess and obsolescence based upon assumptions about future demand, product mix and possible alternative uses. Actual demand, product mix and alternative usage may be lower than those that we project and this difference could have a material adverse effect on our gross margin if inventory write-downs beyond those initially recorded become necessary. Alternatively, if actual demand, product mix and alternative usage are more favorable than those we estimated at the time of such a write-down, our gross margin could be favorably impacted in future periods.
GOODWILL, INTANGIBLE ASSETS AND LONG-LIVED ASSETS
We evaluate our goodwill for impairment annually in the fourth quarter and in any interim period in which events or circumstances arise that indicate our goodwill may be impaired. Indicators of impairment include, but are not limited to, a significant deterioration in overall economic conditions, a decline in our market capitalization, the loss of significant business, significant decreases in funding for our contracts, or other significant adverse changes in industry or market conditions.
We test goodwill for impairment at the reporting unit level. Goodwill impairment guidance provides entities an option to perform a qualitative assessment (commonly known as “step zero”) to determine whether further impairment testing is necessary before performing the two-step test. The qualitative assessment requires significant judgments by management about macro-economic conditions including the entity's operating environment, its industry and other market considerations, entity-specific events related to financial performance or loss of key personnel, and other events that could impact the reporting unit. If we conclude that further testing is required, the impairment test involves a two-step process. Step one compares the fair value of the reporting unit with its carrying value, including goodwill. If the carrying amount exceeds the fair value of the reporting unit, step two is required to determine if there is an impairment of the goodwill. Step two compares the implied fair value of the reporting unit's goodwill to the carrying amount of the goodwill. The Company estimates the fair value of its reporting units using the income approach based upon a discounted cash flow model. The income approach requires the use of many assumptions and estimates including future revenues, expenses, capital expenditures, and working capital, as well as discount factors and income tax rates. In addition, the Company uses the market approach, which compares the reporting unit to publicly-traded companies and transactions involving similar businesses, to support the conclusions of the income approach.
As part of our annual goodwill impairment testing, we utilized a discount rate for each of our reporting units, as defined by ASC 350, Intangibles-Goodwill and Other, that we believe represents the risks that our businesses face, considering their sizes, the current economic environment, and other industry data we believe is appropriate. The discount rates for Sensor and Mission Processing (“SMP”), Advanced Microelectronic Solutions (“AMS”) and Mercury Defense Systems (“MDS”) were 10.0%, 8.0%, and 8.0%. The annual testing indicated that the fair values of our SMP, AMS, and MDS reporting units significantly exceeded their carrying values, and thus no further testing was required.
We also review finite-lived intangible assets and long-lived assets when indications of potential impairment exist, such as a significant reduction in undiscounted cash flows associated with the assets. Should the fair value of our long-lived assets decline because of reduced operating performance, market declines, or other indicators of impairment, a charge to operations for impairment may be necessary.
INCOME TAXES
The determination of income tax expense requires us to make certain estimates and judgments concerning the calculation of deferred tax assets and liabilities, as well as the deductions and credits that are available to reduce taxable income. We recognize deferred tax assets and liabilities for the expected future tax consequences of events that have been included in our consolidated financial statements. Under this method, deferred tax assets and liabilities are determined based on the difference between the financial statement and tax basis of assets and liabilities using enacted tax rates for the year in which the differences are expected to reverse.
In evaluating our ability to recover deferred tax assets, we consider all available positive and negative evidence, including our past operating results, our forecast of future earnings, future taxable income, and tax planning strategies. The assumptions utilized in determining future taxable income require significant judgment. We record a valuation allowance against deferred tax assets if, based upon the available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized. If it becomes more likely than not that a tax asset will be used for which a reserve has been provided, we reverse the related valuation allowance. If our actual future taxable income by tax jurisdiction differs from estimates, additional allowances or reversals of reserves may be necessary.
We use a two-step approach to recognize and measure uncertain tax positions. First, the tax position must be evaluated to determine the likelihood that it will be sustained upon external examination. If the tax position is deemed more-likely-than-not to be sustained, the tax position is then assessed to determine the amount of benefit to recognize in the financial statements. The amount of the benefit that may be recognized is the largest amount that has a greater than 50% likelihood of being realized upon

46

Table of Contents

ultimate settlement. We reevaluate our uncertain tax positions on a quarterly basis and any changes to these positions as a result of tax audits, tax laws or other facts and circumstances could result in additional charges to operations.
BUSINESS COMBINATIONS
We utilize the acquisition method of accounting for business combinations and allocate the purchase price of an acquisition to the various tangible and intangible assets acquired and liabilities assumed based on their estimated fair values. We primarily establish fair value using the income approach based upon a discounted cash flow model. The income approach requires the use of many assumptions and estimates including future revenues and expenses, as well as discount factors and income tax rates. Other estimates include:
estimated step-ups for the fixed assets and inventory;
estimated fair values of intangible assets; and
estimated income tax assets and liabilities assumed from the acquiree.
While we use our best estimates and assumptions as part of the purchase price allocation process to accurately value assets acquired and liabilities assumed at the business acquisition date, our estimates and assumptions are inherently uncertain and subject to refinement. As a result, during the purchase price allocation period, which is generally one year from the business acquisition date, we record adjustments to the assets acquired and liabilities assumed, with the corresponding offset to goodwill. For changes in the valuation of intangible assets between preliminary and final purchase price allocation, the related amortization is adjusted in the period it occurs. Subsequent to the purchase price allocation period any adjustment to assets acquired or liabilities assumed is included in operating results in the period in which the adjustment is determined.
RECENTLY ISSUED ACCOUNTING PRONOUNCEMENTS
In May 2014, the FASB issued ASU No. 2014-09, Revenue from Contracts with Customers (Topic 606), which requires an entity to recognize the amount of revenue to which it expects to be entitled for the transfer of promised goods or services to customers. The ASU will replace most existing revenue recognition guidance in GAAP when it becomes effective. ASU 2015-14, Revenue from Contracts with Customers (Topic 606): Deferral of the Effective Date, which was issued in August 2015, revised the effective date for this ASU to annual and interim periods beginning on or after December 15, 2017. In accordance with this standard, we will adopt the new standard effective July 1, 2018.
The new standard permits adoption by using either (i) a retrospective approach for all periods presented in the period of adoption or (ii) a modified retrospective approach with the cumulative effect of initially applying the new standard recognized at the date of initial application and providing certain additional disclosures. We will adopt the standard using the retrospective approach. We have developed an implementation plan in adopting this standard and completed the assessment phase. Further, we have evaluated our policies in relation to our internal controls framework. This assessment included identification, consideration, and quantification of the impact of the new standard on our financial statements, accounting policies, processes, control environment and systems. The outcome of this assessment included implementation of supporting processes and systems that enable timely and accurate reporting under the new standard. We do not expect a significant change in our control environment due to the adoption of the new standard. The adoption of the new standard will also result in additional disclosures around the nature and timing of our performance obligations, deferred revenue contract liabilities, deferred contract cost assets, as well as significant judgments and practical expedients used by us.
We believe that, based on our assessment, upon adoption, the new standard will not have a material impact to the amount or timing of revenue recognition related to our legacy accounting methods including ship and bill arrangements, multiple-deliverable arrangements and contract accounting arrangements, which encompassed the legacy percentage of completion, completed contract and time and materials methods. As a result of adoption, we do not expect a material impact to the financial statements presented.
In connection with the adoption of the new standard, there is a requirement to capitalize certain incremental costs of obtaining a contract, which for us primarily comprises commission expenses for internal and external sales representatives. Any such costs required to be capitalized would be amortized over the period of performance for the underlying contracts. We expect to elect the practical expedient under the new standard whereby costs associated with contracts that have a duration less than one year would be expensed as incurred. We have completed the evaluation of capitalizing costs to obtain a contract, noting that the impact related to these costs would be limited to commissions on contracts with a duration exceeding one year. The impact is not expected to be material.
In February 2016, the FASB issued ASU 2016-02, Leases (Topic 842), an amendment of the FASB Accounting Standards Codification. This ASU requires lessees to recognize a right-of-use asset and lease liability for most lease arrangements. The new standard is effective for us on July 1, 2019. The standard mandates a modified retrospective transition method for all entities and early adoption is permitted. We are continuing to evaluate our population of leases to determine the effect that ASU 2016-02 will have on our consolidated financial statements and related disclosures.

47

Table of Contents

In August 2016, the FASB issued ASU No. 2016-15, Classification of Certain Cash Receipts and Cash Payments, an amendment of the FASB Accounting Standards Codification. This ASU will reduce diversity in practice for classifying cash payments and receipts in the statement of cash flows for a number of common transactions. It will also clarify when identifiable cash flows should be separated versus classified based on their predominant source or use. This ASU is effective for public business entities for fiscal years beginning after December 15, 2017, and interim periods within those fiscal years. Early adoption is permitted, including adoption in an interim period. If an entity early adopts the amendments in an interim period, any adjustments should be reflected as of the beginning of the fiscal year that includes that interim period. An entity that elects early adoption must adopt all of the amendments in the same period. We do not expect this guidance to have a material impact to our consolidated financial statements.
In October 2016, the FASB issued ASU No. 2016-16, Intra-Entity Transfers of Assets Other Than Inventory, an amendment of the FASB Accounting Standards Codification. This ASU requires the seller and buyer to recognize at the transaction date the current and deferred income tax consequences of intercompany asset transfers (except transfers of inventory). Under current U.S. GAAP, the seller and buyer defer the consolidated tax consequences of an intercompany asset transfer from the period of the transfer to a future period when the asset is transferred out of the consolidated group, or otherwise affects consolidated earnings. This standard will cause volatility in companies’ effective tax rates, particularly for those that transfer intangible assets to foreign subsidiaries. For public entities, the new standard is effective for annual and interim periods in fiscal years beginning after December 15, 2017. An entity may early adopt the standard but only at the beginning of an annual period for which it has not issued or made available for issuance financial statements (interim or annual). We do not expect this guidance to have a material impact to our consolidated financial statements.
In January 2017, the FASB issued ASU No. 2017-04, Intangibles—Goodwill and Other (Topic 350): Simplifying the Test for Goodwill Impairment, an amendment of the FASB Accounting Standards Codification. This ASU eliminates the requirement to measure the implied fair value of goodwill by assigning the fair value of a reporting unit to all assets and liabilities within that unit (“the Step 2 test”) from the goodwill impairment test. Instead, if the carrying amount of a reporting unit exceeds its fair value, an impairment loss is recognized in an amount equal to that excess, limited by the amount of goodwill in that reporting unit. For public business entities, the new standard is effective for its annual or any interim goodwill impairment tests in fiscal years beginning after December 15, 2019. The ASU requires prospective adoption and permits early adoption for interim or annual goodwill impairment tests performed on testing dates after January 1, 2017. We do not expect this guidance to have a material impact to our consolidated financial statements.
In March 2017, the FASB issued ASU No. 2017-07, Compensation Retirement Benefits (Topic 715): Improving the Presentation of Net Periodic Pension Cost and Net Periodic Postretirement Benefit Cost, an amendment of the FASB Accounting Standards Codification. This ASU requires employers that sponsor defined benefit pension and/or other post-retirement benefit plans to report the service cost component of net benefit cost in the same line item as other compensation costs arising from services rendered by the pertinent employees during the period. Employers are required to present the other components of net benefit costs in the income statement separately from the service cost component and outside a subtotal of income from operations. Additionally, only the service cost component of net periodic pension cost will be eligible for asset capitalization. For public entities, the new standard is effective for annual periods beginning after December 15, 2017, including interim periods within that annual period. Early adoption is permitted as of the beginning of an annual period for which financial statements (interim or annual) have not been issued or made available for issuance. This ASU should be applied retrospectively for the presentation of the service cost component and the other components of net periodic pension cost and net periodic postretirement benefit cost in the income statement and prospectively, on and after the effective date, for the capitalization of the service cost component of net periodic pension cost and net periodic postretirement benefit in assets. We do not expect this guidance to have a material impact to our consolidated financial statements.
In March 2018, the FASB issued ASU No. 2018-02, Income Statement - Reporting Comprehensive Income (Topic 220) Reclassification of Certain Tax Effects for Accumulated Other Comprehensive Income, an amendment of the FASB Accounting Standards Codification. This ASU permits a company to reclassify the disproportionate income tax effects of the Tax Cuts and Jobs Act of 2017 on items within accumulated other comprehensive income ("AOCI") to retained earnings. The amounts applicable for reclassification should include the effect of the change in the U.S. federal corporate income tax rate on the gross deferred tax amounts and related valuation allowances, if any, at the date of the enactment of the Tax Cuts and Jobs Act of 2017 related to the items remaining in AOCI. The effect of the change in the U.S. federal corporate income tax rate on gross valuation allowances that were originally charged to income from continuing operations shall not be included. For all entities, the new standard is effective for fiscal years beginning after December 15, 2018, including interim periods within that annual period, and early adoption is permitted. We are evaluating the effect that ASU 2018-02 will have on our consolidated financial statements and related disclosures.

48

Table of Contents

RECENTLY ADOPTED ACCOUNTING PRONOUNCEMENTS
Effective July 1, 2017, we adopted FASB issued ASU No. 2015-11, Simplifying the Measurement of Inventory, an amendment of the FASB Accounting Standards Codification. This ASU changes the measurement principle for inventory from the lower of cost or market to lower of cost and net realizable value for entities that do not measure inventory using the last-in, first-out or retail inventory method. The ASU also eliminates the requirement for these entities to consider replacement cost or net realizable value less an approximately normal profit margin when measuring inventory. Such adoption has not and will not have any impact to our consolidated financial statements.
ITEM 7A.
QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
INTEREST RATE RISK
Our exposure to interest rate risk is related primarily to our investment portfolio and the Revolver.
Our investment portfolio includes money market funds from high quality U.S. government issuers. A change in prevailing interest rates may cause the fair value of our investments to fluctuate. For example, if we hold a security that was issued with a fixed interest rate at the then-prevailing rate and the prevailing rate rises, the fair value of the principal amount of our investment will probably decline. To minimize this risk, investments are generally available for sale and we generally limit the amount of credit exposure to any one issuer.
We also are exposed to the impact of interest rate changes primarily through our borrowing activities. For our variable rate borrowings, we may use fixed interest rate swaps, effectively converting variable rate borrowings to fixed rate borrowings in order to mitigate the impact of interest rate changes on earnings. These swaps will be designated as cash flow hedges. There were no swaps outstanding at June 30, 2018. As of June 30, 2018, there were outstanding borrowings of $195 million against the Revolver.
CONCENTRATION OF CREDIT RISK
Financial instruments that potentially expose the Company to concentrations of credit risk consist principally of cash, cash equivalents and accounts receivable. We place our cash and cash equivalents with financial institutions with high credit quality. At June 30, 2018 and 2017, we had $66.5 million and $41.6 million, respectively, of cash and cash equivalents on deposit or invested with our financial and lending institutions.
We provide credit to customers in the normal course of business. We perform ongoing credit evaluations of our customers’ financial condition and limit the amount of credit extended when deemed necessary. At June 30, 2018, five customers accounted for 54% of our receivables, unbilled receivables and costs in excess of billings. At June 30, 2017, five customers accounted for 53% of our receivables, unbilled receivables and costs in excess of billings.
FOREIGN CURRENCY RISK
We operate primarily in the United States; however, we conduct business outside the United States through our foreign subsidiaries in Switzerland, the United Kingdom, France, Japan, Spain and Canada where business is largely transacted in non-U.S. dollar currencies. Accordingly, we are subject to exposure from adverse movements in the exchange rates of local currencies. Local currencies are used as the functional currency for our non-U.S. subsidiaries. Consequently, changes in the exchange rates of the currencies may impact the translation of the foreign subsidiaries’ statements of operations into U.S. dollars, which may in turn affect our consolidated statement of operations.
We have not entered into any financial derivative instruments that expose us to material market risk, including any instruments designed to hedge the impact of foreign currency exposures. We may, however, hedge such exposure to foreign currency exchange rate fluctuations in the future.

49

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Shareholders and Board of Directors
Mercury Systems, Inc.:
Opinions on the Consolidated Financial Statements and Internal Control Over Financial Reporting
We have audited the accompanying consolidated balance sheets of Mercury Systems, Inc. and subsidiaries (the Company) as of June 30, 2018 and 2017, the related consolidated statements of operations and comprehensive income, shareholders’ equity, and cash flows for each of the years in the three-year period ended June 30, 2018, and the related notes and financial statement schedule II (collectively, the consolidated financial statements). We also have audited the Company’s internal control over financial reporting as of June 30, 2018, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission.
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of the Company as of June 30, 2018 and 2017, and the results of its operations and its cash flows for each of the years in the three-year period ended June 30, 2018, in conformity with U.S. generally accepted accounting principles. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of June 30, 2018, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission.
The Company acquired Themis Computer (Themis) during fiscal year 2018, and management excluded from its assessment of the effectiveness of the Company's internal control over financial reporting as of June 30, 2018, Themis’ internal control over financial reporting associated with 20 percent of total consolidated assets (of which 17 percent represented goodwill and intangible assets included within the scope of the assessment) and 6 percent of total consolidated revenues included in the consolidated financial statements of the Company as of and for the year ended June 30, 2018. Our audit of internal control over financial reporting of the Company also excluded an evaluation of the internal control over financial reporting of Themis.
Basis for Opinions
The Company’s management is responsible for these consolidated financial statements, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Annual Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s consolidated financial statements and an opinion on the Company’s internal control over financial reporting based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud, and whether effective internal control over financial reporting was maintained in all material respects.
Our audits of the consolidated financial statements included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.
Definition and Limitations of Internal Control Over Financial Reporting
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

50

Table of Contents

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
/s/ KPMG LLP
We have served as the Company’s auditor since 2006.
Boston, Massachusetts
August 16, 2018

51


ITEM 8.
FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
MERCURY SYSTEMS, INC.
CONSOLIDATED BALANCE SHEETS
(In thousands, except share and per share data) 
 
June 30,
2018
 
2017
Assets
 
 
 
Current assets:
 
 
 
Cash and cash equivalents
$
66,521

 
$
41,637

Accounts receivable, net of allowance for doubtful accounts of $359 and $83 at June 30, 2018 and 2017, respectively
104,040

 
76,341

Unbilled receivables and costs in excess of billings
39,774

 
37,332

Inventory
108,585

 
81,071

Prepaid income taxes
3,761

 
1,434

Prepaid expenses and other current assets
9,062

 
8,381

Total current assets
331,743

 
246,196

Property and equipment, net
50,980

 
51,643

Goodwill
497,442

 
380,846

Intangible assets, net
177,904

 
129,037

Other non-current assets
6,411

 
8,023

Total assets
$
1,064,480

 
$
815,745

Liabilities and Shareholders’ Equity
 
 
 
Current liabilities:
 
 
 
Accounts payable
$
21,323

 
$
27,485

Accrued expenses
16,386

 
20,594

Accrued compensation
21,375

 
18,406

Deferred revenues and customer advances
12,596

 
6,360

Total current liabilities
71,680

 
72,845

Deferred income taxes
13,635

 
4,856

Income taxes payable
998

 
855

Long-term debt
195,000

 

Other non-current liabilities
11,276

 
11,772

Total liabilities
292,589

 
90,328

Commitments and contingencies (Note K)


 


Shareholders’ equity:
 
 
 
Preferred stock, $0.01 par value; 1,000,000 shares authorized; no shares issued or outstanding

 

Common stock, $0.01 par value; 85,000,000 shares authorized; 46,924,238 and 46,303,075 shares issued and outstanding at June 30, 2018 and 2017, respectively
469

 
463

Additional paid-in capital
590,163

 
584,795

Retained earnings
179,968

 
139,085

Accumulated other comprehensive income
1,291

 
1,074

Total shareholders’ equity
771,891

 
725,417

Total liabilities and shareholders’ equity
$
1,064,480

 
$
815,745

The accompanying notes are an integral part of the consolidated financial statements.

52


MERCURY SYSTEMS, INC.
CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE INCOME
(In thousands, except per share data) 
 
For the Years Ended June 30,
 
2018
 
2017
 
2016
Net revenues
$
493,184

 
$
408,588

 
$
270,154

Cost of revenues
267,326

 
217,045

 
142,535

Gross margin
225,858

 
191,543

 
127,619

Operating expenses:
 
 
 
 
 
Selling, general and administrative
88,365

 
76,491

 
52,952

Research and development
58,807

 
54,086

 
36,388

Amortization of intangible assets
26,004

 
19,680

 
8,842

Restructuring and other charges
3,159

 
1,952

 
1,240

Impairment of long-lived assets

 

 
231

Acquisition costs and other related expenses
2,538

 
1,931

 
3,993

Total operating expenses
178,873

 
154,140

 
103,646

Income from operations
46,985

 
37,403

 
23,973

Interest income
32

 
462

 
131

Interest expense
(2,850
)
 
(7,568
)
 
(1,172
)
Other (expense) income, net
(1,594
)
 
771

 
2,354

Income before income taxes
42,573

 
31,068

 
25,286

Tax provision
1,690

 
6,193

 
5,544

Net income
$
40,883

 
$
24,875

 
$
19,742

 
 
 
 
 
 
Basic net earnings per share
$
0.88

 
$
0.59

 
$
0.58

Diluted net earnings per share
$
0.86

 
$
0.58

 
$
0.56

 
 
 
 
 
 
Weighted-average shares outstanding:
 
 
 
 
 
Basic
46,719

 
41,986

 
34,241

Diluted
47,471

 
43,018

 
35,097

 
 
 
 
 
 
Comprehensive income:
 
 
 
 
 
Net income
$
40,883

 
$
24,875

 
$
19,742

Foreign currency translation adjustments
(137
)
 
(93
)
 
171

Pension benefit plan, net of tax
354

 
220

 

Total other comprehensive income, net of tax
217

 
127

 
171

Total comprehensive income
$
41,100

 
$
25,002

 
$
19,913

 The accompanying notes are an integral part of the consolidated financial statements.

53


MERCURY SYSTEMS, INC.
CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY
For the Years Ended June 30, 2018, 2017 and 2016
(In thousands)
 
 
Common Stock
 
Additional
Paid-in
Capital
 
Retained
Earnings
 
Accumulated
Other
Comprehensive
Income
 
Total
Shareholders’
Equity
Shares
 
Amount
 
Balance at June 30, 2015
32,571

 
$
326

 
$
254,568

 
$
94,468

 
$
776

 
$
350,138

Issuance of common stock under employee stock incentive plans
1,267

 
12

 
6,867

 

 

 
6,879

Issuance of common stock under employee stock purchase plan
88

 
1

 
1,217

 

 

 
1,218

Retirement of common stock
(426
)
 
(4
)
 
(7,951
)
 

 

 
(7,955
)
Follow-on public stock offering
5,175

 
52

 
92,726

 

 

 
92,778

Stock-based compensation

 

 
9,666

 

 

 
9,666

Net income

 

 

 
19,742

 

 
19,742

Share-based business combination consideration

 

 
407

 

 

 
407

Foreign currency translation adjustments

 

 

 

 
171

 
171

Balance at June 30, 2016
38,675

 
387

 
357,500

 
114,210

 
947

 
473,044

Issuance of common stock under employee stock incentive plans
976

 
9

 
2,747

 

 

 
2,756

Issuance of common stock under employee stock purchase plan
96

 
1

 
2,213

 

 

 
2,214

Retirement of common stock
(344
)
 
(3
)
 
(8,763
)
 

 

 
(8,766
)
Follow-on public stock offering
6,900

 
69

 
215,656

 

 

 
215,725

Stock-based compensation

 

 
15,442

 

 

 
15,442

Net income

 

 

 
24,875

 

 
24,875

Foreign currency translation adjustments

 

 

 

 
(93
)
 
(93
)
Pension benefit plan, net of tax

 

 

 

 
220

 
220

Balance at June 30, 2017
46,303

 
463

 
584,795

 
139,085

 
1,074

 
725,417

Issuance of common stock under employee stock incentive plans
868

 
8

 
655

 

 

 
663

Issuance of common stock under employee stock purchase plan
82

 
1

 
2,781

 

 

 
2,782

Retirement of common stock
(329
)
 
(3
)
 
(15,505
)
 

 

 
(15,508
)
Stock-based compensation

 

 
17,437

 

 

 
17,437

Net income

 

 

 
40,883

 

 
40,883

Foreign currency translation adjustments

 

 

 

 
(137
)
 
(137
)
Pension benefit plan, net of tax

 

 

 

 
354

 
354

Balance at June 30, 2018
46,924

 
$
469

 
$
590,163

 
$
179,968

 
$
1,291

 
$
771,891


The accompanying notes are an integral part of the consolidated financial statements.

54


MERCURY SYSTEMS, INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS
(In thousands) 

 
For the Years Ended June 30,
 
2018
 
2017
 
2016
Cash flows from operating activities:
 
 
 
 
 
Net income
$
40,883

 
$
24,875

 
$
19,742

Adjustments to reconcile net income to net cash provided by operating activities:
 
 
 
 
 
Depreciation and amortization expense
42,277

 
32,269

 
15,742

Stock-based compensation expense
17,314

 
15,341

 
9,574

Benefit for deferred income taxes
(5,464
)
 
(7,841
)
 
(3,061
)
Impairment of goodwill and long-lived assets

 

 
231

Non-cash interest expense

 
1,810

 
301

Other non-cash items
2,103

 
(626
)
 
(722
)
Changes in operating assets and liabilities, net of effects of businesses acquired:
 
 
 
 
 
Accounts receivable, unbilled receivables, and costs in excess of billings
(22,751
)
 
(14,054
)
 
(25,396
)
Inventory
(16,230
)
 
(9,318
)
 
(865
)
Prepaid income taxes
(2,327
)
 
1,978

 
346

Prepaid expenses and other current assets
(361
)
 
(1,270
)
 
2,964

Other non-current assets
296

 
372

 
(778
)
Accounts payable, accrued expenses and accrued compensation
(5,267
)
 
3,520

 
18,871

Deferred revenues and customer advances
6,035

 
(1,621
)
 
(194
)
Income taxes payable
(11,187
)
 
9,622

 
253

Other non-current liabilities
(2,000
)
 
4,089

 
(68
)
Net cash provided by operating activities
43,321

 
59,146

 
36,940

Cash flows from investing activities:
 
 
 
 
 
Acquisition of businesses, net of cash acquired
(185,396
)
 
(77,757
)
 
(309,756
)
Purchases of property and equipment
(15,106
)
 
(32,844
)
 
(7,885
)
Other investing activities
(375
)
 
(486
)
 
(567
)
Net cash used in investing activities
(200,877
)
 
(111,087
)
 
(318,208
)
Cash flows from financing activities:
 
 
 
 
 
Proceeds from equity offering, net

 
215,725

 
92,778

Proceeds from employee stock plans
3,445

 
4,970

 
8,097

Payments for retirement of common stock
(15,508
)
 
(8,766
)
 
(7,955
)
Payments under credit facilities
(15,000
)
 
(200,000
)
 

Borrowings under credit facilities
210,000

 

 
194,900

Payments of debt issuance costs

 
(591
)
 
(2,926
)
Net cash provided by financing activities
182,937

 
11,338

 
284,894

Effect of exchange rate changes on cash and cash equivalents
(497
)
 
549

 
479

Net increase (decrease) in cash and cash equivalents
24,884

 
(40,054
)
 
4,105

Cash and cash equivalents at beginning of year
41,637

 
81,691

 
77,586

Cash and cash equivalents at end of year
$
66,521

 
$
41,637

 
$
81,691

Cash paid during the period for:
 
 
 
 
 
Interest
$
1,607

 
$
5,758

 
$
1,041

Income taxes
$
17,004

 
$
2,834

 
$
7,975

Supplemental disclosures—non-cash activities:
 
 
 
 
 
Share-based business combination consideration
$

 
$

 
$
407

 The accompanying notes are an integral part of the consolidated financial statements.

55

Table of Contents

MERCURY SYSTEMS, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(Amounts in thousands, except per share data)
A.Description of Business
Mercury Systems, Inc. (the “Company” or “Mercury”) is a leading commercial provider of secure sensor and safety critical mission processing subsystems. Optimized for customer and mission success, its solutions power a wide variety of critical defense and intelligence programs. Headquartered in Andover, Massachusetts, it is pioneering a next-generation defense electronics business model specifically designed to meet the industry's current and emerging technology and business needs. The Company delivers affordable innovative solutions, rapid time-to-value and service and support primarily to defense prime contractor customers. The Company's products and solutions have been deployed in more than 300 programs with over 25 different defense prime contractors. Key programs include Aegis, Patriot, Surface Electronic Warfare Improvement Program (“SEWIP”), Gorgon Stare, Predator, F-35, Reaper, F-16 SABR, E2D Hawkeye, Paveway, Filthy Buzzard, PGK, ProVision, P1, and AIDEWS. The Company's organizational structure allows it to deliver capabilities that combine technology building blocks and deep domain expertise in the aerospace and defense sector.
On February 1, 2018, the Company acquired Themis Computer ("Themis") on a cash-free, debt-free basis for a total purchase price of approximately $180,000, prior to net working capital and net debt adjustments. Based in Fremont, California, Themis is a leading designer, manufacturer and integrator of commercial, SWaP-optimized rugged servers, computers and storage systems for U.S. and international defense programs. The acquisition of Themis is consistent with the Company's strategy and will expand its position in the Command, Control, Communications, Computers, and Intelligence ("C4I") market. See Note C to consolidated financial statements.
On July 3, 2017, the Company acquired Richland Technologies, LLC ("RTL") on a cash-free, debt-free basis for a total purchase price of $5,798. Based in Duluth, Georgia, RTL specializes in safety-critical and high integrity systems, software, and hardware development as well as safety-certification services for mission-critical applications. In addition, RTL is a leader in safety-certifiable embedded graphics software for commercial and military aerospace applications. See Note C to consolidated financial statements.
On April 3, 2017, the Company acquired Delta Microwave, LLC (“Delta”) on a cash-free, debt-free basis for a total purchase price of $40,500. Based in Oxnard, California, Delta is a leading designer and manufacturer of high-value radio frequency ("RF"), microwave and millimeter wave sub-assemblies and components for the military, aerospace, and space markets. See Note C to consolidated financial statements.
On November 4, 2016, the Company acquired CES Creative Electronic Systems, S.A. (“CES”) for a total purchase price of approximately $39,123, prior to net working capital and net debt adjustments. Based in Geneva, Switzerland, CES is a leading provider of embedded solutions for military and aerospace mission critical computing applications. CES specializes in the design, development and manufacture of safety-certifiable product and subsystems solutions including: primary flight control units, flight test computers, mission computers, command and control processors, graphics and video processing and avionics-certified Ethernet and input-output ("IO"). CES has decades of experience designing subsystems deployed in applications certified up to the highest levels of design assurance. CES products and solutions are used on platforms such as aerial refueling tankers and multi-mission aircraft, as well as several types of unmanned platforms. See Note C to consolidated financial statements.
On May 2, 2016, the Company acquired the custom microelectronics, RF and microwave solutions, and embedded security operations of Microsemi Corporation (the “Carve-Out Business”), resulting in the entities comprising the Carve-Out Business becoming 100% owned direct or indirect subsidiaries of Mercury (the “Carve-Out Acquisition”). Under the terms of the Purchase Agreement, the Company paid $300,000 in cash on a cash-free, debt-free basis, prior to working capital and other post-closing adjustments.
B.Summary of Significant Accounting Policies
PRINCIPLES OF CONSOLIDATION
The consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries. All intercompany transactions and balances have been eliminated.
USE OF ESTIMATES
The preparation of financial statements in conformity with Generally Accepted Accounting Principles ("GAAP") requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the dates of the financial statements and the reported amounts of revenues and expenses during the reporting periods. Actual results could differ from those estimates.

56

Table of Contents

BUSINESS COMBINATIONS
The Company utilizes the acquisition method of accounting under ASC 805, Business Combinations, (“ASC 805”), for all transactions and events which it obtains control over one or more other businesses, to recognize the fair value of all assets and liabilities acquired, even if less than one hundred percent ownership is acquired, and in establishing the acquisition date fair value as of the measurement date for all assets and liabilities assumed. The Company also utilizes ASC 805 for the initial recognition and measurement, subsequent measurement and accounting, and disclosure of assets and liabilities arising from contingencies in business combinations. Other estimates include:
estimated step-ups for the fixed assets and inventory;
estimated fair values of intangible assets; and
estimated income tax assets and liabilities assumed from the acquiree.
While the Company uses its best estimates and assumptions as part of the purchase price allocation process to accurately value assets acquired and liabilities assumed at the business acquisition date, the estimates and assumptions are inherently uncertain and subject to refinement. As a result, during the purchase price allocation period, which is generally one year from the business acquisition date, the Company records adjustments to the assets acquired and liabilities assumed, with the corresponding offset to goodwill. For changes in the valuation of intangible assets between the preliminary and final purchase price allocation, the related amortization is adjusted in the period it occurs. Subsequent to the purchase price allocation period, any adjustment to assets acquired or liabilities assumed is included in operating results in the period in which the adjustment is determined.
REVENUE RECOGNITION
The Company recognizes revenue using three different types of accounting methods: ship and bill, multiple-deliverable arrangements and contract accounting which encompass the percentage of completion, completed contract and time and materials methods. The Company relies upon ASC 605, Revenue Recognition, to account for its revenue transactions. Revenue is recognized upon shipment provided that title and risk of loss have passed to the customer, there is persuasive evidence of an arrangement, the sales price is fixed or determinable, collection of the related receivable is reasonably assured, and customer acceptance criteria, if any, have been successfully demonstrated. Out-of-pocket expenses that are reimbursable by the customer are included in revenue and cost of revenue.
Certain contracts with customers require the Company to perform tests of its products prior to shipment to ensure their performance complies with the Company’s published product specifications and, on occasion, with additional customer-requested specifications. In these cases, the Company conducts such tests and, if they are completed successfully, includes a written confirmation with each order shipped. As a result, at the time of each product shipment, the Company believes that no further customer testing requirements exist and that there is no uncertainty of acceptance by its customer. Total revenue recognized under ship and bill revenue arrangements was 44%, 44% and 35% of total revenue in the years ended June 30, 2018, 2017 and 2016, respectively.
The Company uses FASB Accounting Standards Update (“ASU”) No. 2009-13 (“ASU 2009-13”), Multiple-Deliverable Revenue Arrangements. ASU 2009-13 establishes a selling price hierarchy for determining the selling price of a deliverable, which includes: (1) vendor-specific objective evidence (“VSOE”) if available; (2) third-party evidence (“TPE”) if VSOE is not available; and (3) best estimated selling price (“BESP”), if neither VSOE nor TPE is available. Additionally, ASU 2009-13 expands the disclosure requirements related to a vendor’s multiple-deliverable revenue arrangements. 
The Company enters into multiple-deliverable arrangements that may include a combination of hardware components, related integration or other services. These arrangements generally do not include any performance-, cancellation-, termination- or refund-type provisions. Total revenue recognized under multiple-deliverable revenue arrangements was 35%, 33% and 37% of total revenue in the years ended June 30, 2018, 2017 and 2016, respectively.
In accordance with the provisions of ASU 2009-13, the Company allocates arrangement consideration to each deliverable in an arrangement based on its relative selling price. The Company generally expects that it will not be able to establish VSOE or TPE due to limited single element transactions and the nature of the markets in which the Company competes, and, as such, the Company typically determines its relative selling price using BESP. The objective of BESP is to determine the price at which the Company would transact if the product or service were sold by the Company on a standalone basis.
The Company’s determination of BESP involves the consideration of several factors based on the specific facts and circumstances of each arrangement. Specifically, the Company considers the cost to produce the deliverable, the anticipated margin on that deliverable, the selling price and profit margin for similar parts, the Company’s ongoing pricing strategy and policies (as evident from the price list established and updated by management on a regular basis), the value of any enhancements that have been built into the deliverable and the characteristics of the varying markets in which the deliverable is sold.

57

Table of Contents

The Company analyzes the selling prices used in its allocation of arrangement consideration at a minimum on an annual basis. Selling prices will be analyzed on a more frequent basis if a significant change in the Company’s business necessitates a more timely analysis or if the Company experiences significant variances in its selling prices.
Each deliverable within the Company’s multiple-deliverable revenue arrangements is accounted for as a separate unit of accounting under the guidance of ASU 2009-13 if both of the following criteria are met: the delivered item or items have value to the customer on a standalone basis; and for an arrangement that includes a general right of return relative to the delivered item(s), delivery or performance of the undelivered item(s) is considered probable and substantially in the control of the Company. The Company’s revenue arrangements generally do not include a general right of return relative to delivered products. The Company considers a deliverable to have standalone value if the item is sold separately by the Company or another vendor or if the item could be resold by the customer.
Deliverables not meeting the criteria for being a separate unit of accounting are combined with a deliverable that does meet that criterion. The appropriate allocation of arrangement consideration and recognition of revenue is then determined for the combined unit of accounting.
The Company also engages in long-term contracts for development, production and services activities which it accounts for consistent with ASC 605-35, Accounting for Performance of Construction-Type and Certain Production-Type Contracts, and other relevant revenue recognition accounting literature. The Company considers the nature of these contracts and the types of products and services provided when determining the proper accounting for a particular contract. Generally for fixed-price contracts, other than service-type contracts, revenue is recognized primarily under the percentage of completion method or, for certain short-term contracts, by the completed contract method. Revenue from service-type fixed-price contracts is recognized ratably over the contract period or by other appropriate input or output methods to measure service provided, and contract costs are expensed as incurred. The Company establishes billing terms at the time project deliverables and milestones are agreed. Revenues recognized in excess of the amounts invoiced to clients are classified as unbilled receivables. The Company expects to bill substantially all of the unbilled receivables within the next 12 months. The risk to the Company on a fixed-price contract is that if estimates to complete the contract change from one period to the next, profit levels will vary from period to period. For time and materials contracts, revenue reflects the number of direct labor hours expended in the performance of a contract multiplied by the contract billing rate, as well as reimbursement of other billable direct costs. For all types of contracts, the Company recognizes anticipated contract losses as soon as they become known and estimable.
The Company also considers whether contracts should be combined or segmented in accordance with the applicable criteria under GAAP, and combines closely related contracts when all the applicable criteria under GAAP are met. The combination of two or more contracts requires judgment in determining whether the intent of entering into the contracts was effectively to enter into a single project, which should be combined to reflect an overall profit rate. Similarly, the Company may separate a project, which may consist of a single contract or group of contracts, with varying rates of profitability, only if the applicable criteria under GAAP are met. Judgment also is involved in determining whether a single contract or group of contracts may be segmented based on how the arrangement was negotiated and the performance criteria. The decision to combine a group of contracts or segment a contract could change the amount of revenue and gross profit recorded in a given period.
The use of contract accounting requires significant judgment relative to estimating total contract revenues and costs, including assumptions relative to the length of time to complete the contract, the nature and complexity of the work to be performed, anticipated increases in wages and prices for subcontractor services and materials, and the availability of subcontractor services and materials. The Company’s estimates are based upon the professional knowledge and experience of its engineers, program managers and other personnel, who review each long-term contract monthly to assess the contract’s schedule, performance, technical matters and estimated cost at completion. Changes in estimates are applied retrospectively and when adjustments in estimated contract costs are identified in the ordinary course of business, such revisions may result in current period adjustments to earnings applicable to performance in prior periods.
Contract costs also may include estimated contract recoveries for matters such as contract changes and claims for unanticipated contract costs. The Company records revenue associated with these matters only when the amount of recovery can be estimated reliably and realization is probable. Assumed recoveries for claims included in contracts in process were not material at June 30, 2018 or 2017. Total revenue recognized under contract accounting revenue arrangements was 21%, 23% and 28% of total revenue in the years ended June 30, 2018, 2017 and 2016, respectively.
The Company defines service revenues as revenue from activities that are not associated with the design, development, production, or delivery of tangible assets, software or specific capabilities sold. Examples of the Company's service revenues include: analyst services and systems engineering support, consulting, maintenance and other support, testing and installation. The Company combines its product and service revenues into a single class as service revenues are less than 10 percent of total revenues.
The Company does not provide its customers with rights of product return, other than those related to warranty provisions that permit repair or replacement of defective goods. The Company accrues for anticipated warranty costs upon product shipment.

58

Table of Contents

Revenues from product royalties are recognized upon invoice by the Company. Additionally, all revenues are reported net of government assessed taxes (e.g. sales taxes or value-added taxes).
CASH AND CASH EQUIVALENTS
Cash equivalents, consisting of highly liquid money market funds and U.S. government and U.S. government agency issues with original maturities of 90 days or less at the date of purchase, are carried at fair market value which approximates cost.
FAIR VALUE OF FINANCIAL INSTRUMENTS
The Company measures at fair value certain financial assets and liabilities, including cash equivalents, restricted cash and contingent consideration. ASC 820, Fair Value Measurement and Disclosures, specifies a hierarchy of valuation techniques based on whether the inputs to those valuation techniques are observable or unobservable. Observable inputs reflect market data obtained from independent sources, while unobservable inputs reflect the Company’s market assumptions. These two types of inputs have created the following fair-value hierarchy:
Level 1—Quoted prices for identical instruments in active markets;
Level 2—Quoted prices for similar instruments in active markets, quoted prices for identical or similar instruments in markets that are not active, and model-derived valuations in which all significant inputs and significant value drivers are observable in active markets; and
Level 3—Valuations derived from valuation techniques in which one or more significant inputs or significant value drivers are unobservable.
CONCENTRATION OF CREDIT RISK
Financial instruments that potentially expose the Company to concentrations of credit risk consist principally of cash, cash equivalents and accounts receivable. The Company places its cash and cash equivalents with financial institutions of high credit quality. At June 30, 2018 and 2017, the Company had $66,521 and $41,637, respectively, of cash and cash equivalents on deposit or invested with its financial and lending institutions.
The Company provides credit to customers in the normal course of business. The Company performs ongoing credit evaluations of its customers’ financial condition and limits the amount of credit extended when deemed necessary. At June 30, 2018, five customers accounted for 54% of the Company's accounts receivable, unbilled receivables and costs in excess of billings. At June 30, 2017, five customers accounted for 53% of the Company’s accounts receivable, unbilled receivables and costs in excess of billings.
INVENTORY
Inventory is stated at the lower of cost (first-in, first-out) or net realizable value, and consists of materials, labor and overhead. On a quarterly basis, the Company evaluates inventory for net realizable value. Once an item is written down, the value becomes the new inventory cost basis. The Company reduces the value of inventory for excess and obsolete inventory, consisting of on-hand and non-cancelable on-order inventory in excess of estimated usage. The excess and obsolete inventory evaluation is based upon assumptions about future demand, product mix and possible alternative uses.
SEGMENT INFORMATION
The Company uses the management approach for segment disclosure, which designates the internal organization that is used by management for making operating decisions and assessing performance as the source of its reportable segments. The Company manages its business on the basis of one reportable segment, as a commercial provider of secure sensor and safety critical mission processing subsystems for critical defense and intelligence programs.
GOODWILL AND INTANGIBLE ASSETS
Goodwill is the amount by which the cost of the net assets obtained in a business acquisition exceeded the fair values of the net identifiable assets on the date of purchase (see Note G). Goodwill is not amortized in accordance with the requirements of ASC 350, Intangibles-Goodwill and Other (“ASC 350”). Goodwill is assessed for impairment at least annually, on a reporting unit basis, or when events and circumstances occur indicating that the recorded goodwill may be impaired. If the book value of a reporting unit exceeds its fair value, the implied fair value of goodwill is compared with the carrying amount of goodwill. If the carrying amount of goodwill exceeds the implied fair value, an impairment loss is recorded in an amount equal to that excess.
Intangible assets result from the Company’s various business acquisitions (see Note H) and certain licensed technologies, and consist of identifiable intangible assets, including completed technology, licensing agreements, patents, customer relationships, trademarks, backlog, and non-compete agreements. Intangible assets are reported at cost, net of accumulated amortization and are either amortized on a straight-line basis over their estimated useful lives of up to 12.5 years or over the period the economic benefits of the intangible asset are consumed.

59

Table of Contents

LONG-LIVED ASSETS
Long-lived assets primarily include property and equipment and acquired intangible assets. The Company regularly evaluates its long-lived assets for events and circumstances that indicate a potential impairment in accordance with ASC 360, Property, Plant, and Equipment (“ASC 360”). The Company reviews long-lived assets for impairment whenever events or changes in business circumstances indicate that the carrying amount of the assets may not be fully recoverable or that the useful lives of these assets are no longer appropriate. Each impairment test is based on a comparison of the estimated undiscounted cash flows of the asset as compared to the recorded value of the asset. If impairment is indicated, the asset is written down to its estimated fair value.
Property and equipment are the long-lived, physical assets of the Company acquired for use in the Company’s normal business operations and are not intended for resale by the Company. These assets are recorded at cost. Renewals and betterments that increase the useful lives of the assets are capitalized. Repair and maintenance expenditures that increase the efficiency of the assets are expensed as incurred. Equipment under capital lease is recorded at the present value of the minimum lease payments required during the lease period. Depreciation is based on the estimated useful lives of the assets using the straight-line method (see Note F).
As assets are retired or sold, the related cost and accumulated depreciation are removed from the accounts and any resulting gain or loss is included in the results of operations.
Expenditures for major software purchases and software developed for internal use are capitalized and depreciated using the straight-line method over the estimated useful lives of the related assets, which are generally three years. For software developed for internal use, all external direct costs for material and services and certain payroll and related fringe benefit costs are capitalized in accordance with ASC 350. During fiscal 2018, 2017 and 2016, the Company capitalized $733, $508 and $0 of software development costs.
DEFERRED REVENUES AND CUSTOMER ADVANCES
Deferred revenues consist of deferred product revenue, billings in excess of revenues, deferred service revenue, and customer advances. Deferred product revenue represents amounts that have been invoiced to customers, but are not yet recognizable as revenue because one or more of the conditions for revenue recognition have not been met. Billings in excess of revenues represents milestone billing arrangements on percentage of completion projects where the billings of the contract exceed recognized revenues. Deferred service revenue primarily represents amounts invoiced to customers for annual maintenance contracts or extended warranty concessions, which are recognized ratably over the term of the arrangements. Customer advances represent deposits received from customers on an order.
INCOME TAXES
The Company accounts for income taxes under ASC 740, Income Taxes (“ASC 740”). The Company recognizes deferred tax assets and liabilities for the expected future tax consequences of events that have been included in the Company’s consolidated financial statements. Under this method, deferred tax assets and liabilities are determined based on the difference between the financial statement and tax basis of assets and liabilities using enacted tax rates for the year in which the differences are expected to reverse. The Company records a valuation allowance against net deferred tax assets if, based upon the available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized.
ASC 740 requires a two-step approach to recognizing and measuring uncertain tax positions. First, the tax position must be evaluated to determine the likelihood that it will be sustained upon external examination. If the tax position is deemed more-likely-than-not to be sustained, the tax position is then assessed to determine the amount of benefit to recognize in the financial statements. The amount of the benefit that may be recognized is the largest amount that has a greater than 50% likelihood of being realized upon ultimate settlement. The Company recognizes interest and penalties accrued on any unrecognized tax benefits as a component of income tax expense.
PRODUCT WARRANTY ACCRUAL
The Company’s product sales generally include a 12 month standard hardware warranty. At time of product shipment, the Company accrues for the estimated cost to repair or replace potentially defective products. Estimated warranty costs are based upon prior actual warranty costs for substantially similar transactions and any specifically identified warranty requirements. Product warranty accrual is included as part of accrued expenses in the accompanying consolidated balance sheets. The following table presents the changes in the Company's product warranty accrual.

60

Table of Contents

 
Fiscal
2018
 
Fiscal
2017
 
Fiscal
2016
Beginning balance at July 1,
$
1,691

 
$
1,523

 
$
1,974

Warranty assumed from Themis
117

 

 

Warranty assumed from CES

 
176

 

Warranty assumed from Delta

 
30

 

Warranty assumed from Carve-Out Business

 

 
114

Accruals for warranties issued during the period
1,318

 
1,328

 
1,976

Settlements made during the period
(1,790
)
 
(1,366
)
 
(2,541
)
Ending balance at June 30,
$
1,336

 
$
1,691

 
$
1,523

RESEARCH AND DEVELOPMENT COSTS
Research and development costs are expensed as incurred. Research and development costs are primarily made up of labor charges and prototype material and development expenses.
STOCK-BASED COMPENSATION
Stock-based compensation cost is measured at the grant date based on the fair value of the award and is recognized as expense over the requisite service period, which generally represents the vesting period, and includes an estimate of the awards that will be forfeited. Stock-based compensation expense for the Company’s performance-based restricted stock awards are amortized over the requisite service period using graded vesting. The Company’s other restricted stock awards recognize expense over the requisite service period on a straight-line basis. The Company uses the Black-Scholes valuation model for estimating the fair value on the date of grant of stock options.
RETIREMENT OF COMMON STOCK
Stock that is repurchased or received in connection with the exercise of stock options or in order to cover tax payment obligations triggered by exercise of stock options or the vesting of restricted stock is retired immediately upon the Company’s repurchase. The Company accounts for this under the cost method and upon retirement the excess amount over par value is charged against additional paid-in capital.
NET EARNINGS PER SHARE
Basic net earnings per share is calculated by dividing net income by the weighted-average number of common shares outstanding during the period. Diluted net earnings per share computation includes the effect of shares which would be issuable upon the exercise of outstanding stock options and the vesting of restricted stock, reduced by the number of shares which are assumed to be purchased by the Company under the treasury stock method. For all periods presented, income from continuing operations is the control number for determining whether securities are dilutive or not.
Basic and diluted weighted average shares outstanding were as follows: 
 
Years Ended June 30,
 
2018
 
2017
 
2016
Basic weighted-average shares outstanding
46,719

 
41,986

 
34,241

Effect of dilutive equity instruments
752

 
1,032

 
856

Diluted weighted-average shares outstanding
47,471

 
43,018

 
35,097

Equity instruments to purchase 329, 16 and 7 shares of common stock were not included in the calculation of diluted net earnings per share for the fiscal years ended June 30, 2018, 2017 and 2016, respectively, because the equity instruments were anti-dilutive.
ACCUMULATED OTHER COMPREHENSIVE INCOME
Accumulated other comprehensive income ("AOCI") includes foreign currency translation adjustments and pension benefit plan adjustments. The components of accumulated other comprehensive (loss) income included $(137), $(93), and $171 of foreign currency translation adjustments for the years ended June 30, 2018, 2017 and 2016, respectively. In addition, pension benefit plan adjustments totaled $354, $220 and $0 for the years ended June 30, 2018, 2017 and 2016 respectively. There were no material net unrealized gains on investments for the years ended June 30, 2018, 2017 and 2016.


61

Table of Contents

ACCOUNTS RECEIVABLE FACTORING
On December 21, 2017, the Company executed a Master Receivables Purchase Agreement (the “Purchase Agreement”) with Bank of America, N.A. (the “Bank”) for the sale of certain eligible accounts receivable balances of the Company, up to a maximum of $30,000. Factoring under the Purchase Agreement is treated as a true sale of accounts receivable by the Company. The Company has a continued involvement in servicing accounts receivable under the Purchase Agreement, but has no retained interests related to the factored accounts receivable.
Proceeds from amounts factored by the Company are recorded as an increase to cash and a reduction to accounts receivable outstanding in the consolidated balance sheets. Cash flows attributable to factoring are reflected as cash flows from operating activities in the Company’s Consolidated Statements of Cash Flows. Factoring fees are included as selling, general, and administrative expenses in the Company’s Consolidated Statements of Operations and Comprehensive Income.
The Company factored accounts receivable and incurred factoring fees of $18,821 and $69, respectively, during the second quarter of fiscal 2018. The Company did not factor any accounts receivable or incur any factoring fees during the second half of fiscal 2018.
FOREIGN CURRENCY
Local currencies are the functional currency for the Company’s subsidiaries in Switzerland, the United Kingdom, France, Japan, Spain and Canada. The accounts of foreign subsidiaries are translated using exchange rates in effect at period-end for assets and liabilities and at average exchange rates during the period for results of operations. The related translation adjustments are reported in accumulated other comprehensive income in shareholders’ equity. Gains (losses) resulting from non-U.S. currency transactions are included in other income (expense), net in the Consolidated Statements of Operations and Comprehensive Income and were immaterial for all periods presented.
RECENTLY ISSUED ACCOUNTING PRONOUNCEMENTS
In May 2014, the FASB issued ASU No. 2014-09, Revenue from Contracts with Customers (Topic 606), which requires an entity to recognize the amount of revenue to which it expects to be entitled for the transfer of promised goods or services to customers. The ASU will replace most existing revenue recognition guidance in GAAP when it becomes effective. ASU 2015-14, Revenue from Contracts with Customers (Topic 606): Deferral of the Effective Date, which was issued in August 2015, revised the effective date for this ASU to annual and interim periods beginning on or after December 15, 2017. In accordance with this standard, the Company will adopt the new standard effective July 1, 2018.
The new standard permits adoption by using either (i) a retrospective approach for all periods presented in the period of adoption or (ii) a modified retrospective approach with the cumulative effect of initially applying the new standard recognized at the date of initial application and providing certain additional disclosures. The Company will adopt the standard using the retrospective approach. The Company has developed an implementation plan in adopting this standard and completed the assessment phase. Further, the Company has evaluated its policies in relation to its internal controls framework. This assessment included identification, consideration, and quantification of the impact of the new standard on the Company's financial statements, accounting policies, processes, control environment and systems. The outcome of this assessment included implementation of supporting processes and systems that enable timely and accurate reporting under the new standard. The Company does not expect a significant change in its control environment due to the adoption of the new standard. The adoption of the new standard will also result in additional disclosures around the nature and timing of the Company's performance obligations, deferred revenue contract liabilities, deferred contract cost assets, as well as significant judgments and practical expedients used by the Company.
The Company believes that, based on its assessment, upon adoption, the new standard will not have a material impact to the amount or timing of revenue recognition related to its legacy accounting methods including ship and bill arrangements, multiple-deliverable arrangements and contract accounting arrangements, which encompassed the legacy percentage of completion, completed contract and time and materials methods. As a result of adoption, the Company does not expect a material impact to the financial statements presented.
In connection with the adoption of the new standard, there is a requirement to capitalize certain incremental costs of obtaining a contract, which for the Company, primarily comprises commission expenses for internal and external sales representatives. Any such costs required to be capitalized would be amortized over the period of performance for the underlying contracts. The Company expects to elect the practical expedient under the new standard whereby costs associated with contracts that have a duration less than one year would be expensed as incurred. The Company has completed the evaluation of capitalizing costs to obtain a contract, noting that the impact related to these costs would be limited to commissions on contracts with a duration exceeding one year. The impact is not expected to be material.
In February 2016, the FASB issued ASU 2016-02, Leases (Topic 842), an amendment of the FASB Accounting Standards Codification. This ASU requires lessees to recognize a right-of-use asset and lease liability for most lease arrangements. The new standard is effective for the Company on July 1, 2019. The standard mandates a modified retrospective transition method for all

62

Table of Contents

entities and early adoption is permitted. The Company is continuing to evaluate its population of leases to determine the effect that ASU 2016-02 will have on its consolidated financial statements and related disclosures.
In August 2016, the FASB issued ASU No. 2016-15, Classification of Certain Cash Receipts and Cash Payments, an amendment of the FASB Accounting Standards Codification. This ASU will reduce diversity in practice for classifying cash payments and receipts in the statement of cash flows for a number of common transactions. It will also clarify when identifiable cash flows should be separated versus classified based on their predominant source or use. This ASU is effective for public business entities for fiscal years beginning after December 15, 2017, and interim periods within those fiscal years. Early adoption is permitted, including adoption in an interim period. If an entity early adopts the amendments in an interim period, any adjustments should be reflected as of the beginning of the fiscal year that includes that interim period. An entity that elects early adoption must adopt all of the amendments in the same period. The Company does not expect this guidance to have a material impact its consolidated financial statements.
In October 2016, the FASB issued ASU No. 2016-16, Intra-Entity Transfers of Assets Other Than Inventory, an amendment of the FASB Accounting Standards Codification. This ASU requires the seller and buyer to recognize at the transaction date the current and deferred income tax consequences of intercompany asset transfers (except transfers of inventory). Under current GAAP, the seller and buyer defer the consolidated tax consequences of an intercompany asset transfer from the period of the transfer to a future period when the asset is transferred out of the consolidated group, or otherwise affects consolidated earnings. This standard will cause volatility in companies’ effective tax rates, particularly for those that transfer intangible assets to foreign subsidiaries. For public entities, the new standard is effective for annual and interim periods in fiscal years beginning after December 15, 2017. An entity may early adopt the standard but only at the beginning of an annual period for which it has not issued or made available for issuance financial statements (interim or annual). The Company does not expect this guidance to have a material impact its consolidated financial statements.
In January 2017, the FASB issued ASU No. 2017-04, Intangibles—Goodwill and Other (Topic 350): Simplifying the Test for Goodwill Impairment, an amendment of the FASB Accounting Standards Codification. This ASU eliminates the requirement to measure the implied fair value of goodwill by assigning the fair value of a reporting unit to all assets and liabilities within that unit (“the Step 2 test”) from the goodwill impairment test. Instead, if the carrying amount of a reporting unit exceeds its fair value, an impairment loss is recognized in an amount equal to that excess, limited by the amount of goodwill in that reporting unit. For public business entities, the new standard is effective for its annual or any interim goodwill impairment tests in fiscal years beginning after December 15, 2019. The ASU requires prospective adoption and permits early adoption for interim or annual goodwill impairment tests performed on testing dates after January 1, 2017. The Company does not expect this guidance to have a material impact to its consolidated financial statements.
In March 2017, the FASB issued ASU No. 2017-07, Compensation Retirement Benefits (Topic 715): Improving the Presentation of Net Periodic Pension Cost and Net Periodic Postretirement Benefit Cost, an amendment of the FASB Accounting Standards Codification. This ASU requires employers that sponsor defined benefit pension and/or other post-retirement benefit plans to report the service cost component of net benefit cost in the same line item as other compensation costs arising from services rendered by the pertinent employees during the period. Employers are required to present the other components of net benefit costs in the income statement separately from the service cost component and outside a subtotal of income from operations. Additionally, only the service cost component of net periodic pension cost will be eligible for asset capitalization. For public entities, the new standard is effective for annual periods beginning after December 15, 2017, including interim periods within that annual period. Early adoption is permitted as of the beginning of an annual period for which financial statements (interim or annual) have not been issued or made available for issuance. This ASU should be applied retrospectively for the presentation of the service cost component and the other components of net periodic pension cost and net periodic postretirement benefit cost in the income statement and prospectively, on and after the effective date, for the capitalization of the service cost component of net periodic pension cost and net periodic postretirement benefit in assets. The Company does not expect this guidance to have a material impact its consolidated financial statements.
In March 2018, the FASB issued ASU No. 2018-02, Income Statement - Reporting Comprehensive Income (Topic 220) Reclassification of Certain Tax Effects for Accumulated Other Comprehensive Income, an amendment of the FASB Accounting Standards Codification. This ASU permits a company to reclassify the disproportionate income tax effects of the Tax Cuts and Jobs Act of 2017 on items within AOCI to retained earnings. The amounts applicable for reclassification should include the effect of the change in the U.S. federal corporate income tax rate on the gross deferred tax amounts and related valuation allowances, if any, at the date of the enactment of the Tax Cuts and Jobs Act of 2017 related to the items remaining in AOCI. The effect of the change in the U.S. federal corporate income tax rate on gross valuation allowances that were originally charged to income from continuing operations shall not be included. For all entities, the new standard is effective for fiscal years beginning after December 15, 2018, including interim periods within that annual period, and early adoption is permitted. The Company is evaluating the effect that ASU 2018-02 will have on its consolidated financial statements and related disclosures.

63

Table of Contents

RECENTLY ADOPTED ACCOUNTING PRONOUNCEMENTS
Effective July 1, 2017, the Company adopted FASB issued ASU No. 2015-11, Simplifying the Measurement of Inventory, an amendment of the FASB Accounting Standards Codification. This ASU changes the measurement principle for inventory from the lower of cost or market to lower of cost and net realizable value for entities that do not measure inventory using the last-in, first-out or retail inventory method. The ASU also eliminates the requirement for these entities to consider replacement cost or net realizable value less an approximately normal profit margin when measuring inventory. Such adoption did not have any impact to the Company's consolidated financial statements.
C.
Acquisitions
THEMIS COMPUTER ACQUISITION
On December 21, 2017, the Company and Thunderbird Merger Sub, Inc., a newly formed, wholly-owned subsidiary of the Company (the “Merger Sub”), entered into a Merger Agreement (the “Merger Agreement”) with Ceres Systems (“Ceres”), the holding company that owned Themis Computer (“Themis”, and together with Ceres, collectively the “Acquired Company”). On February 1, 2018, the Company closed the transaction and the Merger Sub merged with and into Ceres with Ceres continuing as the surviving company and a wholly-owned subsidiary of Mercury (the “Merger”). By operation of the Merger, the Company acquired both Ceres and its wholly-owned subsidiary, Themis.
Based in Fremont, California, Themis is a leading designer, manufacturer and integrator of commercial, SWaP-optimized rugged servers, computers and storage systems for U.S. and international markets. Under the terms of the Merger Agreement, the merger consideration (including payments with respect to outstanding stock options) consisted of an all cash purchase price of approximately $180,000. The merger consideration is subject to post-closing adjustments based on a determination of closing net working capital, transaction expenses and net debt (all as defined in the Merger Agreement). The Company funded the acquisition with borrowings obtained under its existing revolving credit facility ("the Revolver").
On July 13, 2018, the Company and former owners of Ceres agreed to post-closing adjustments totaling $700, which will decrease the Company's net purchase price in the first quarter of fiscal 2019.

64

Table of Contents

The following table presents the net purchase price and the preliminary fair values of the assets and liabilities of the Acquired Company on a preliminary basis:
 
 
Amounts 
Consideration transferred
 
 

Cash paid at closing
 
$
187,089

Working capital and net debt adjustment
 
(574
)
Less cash acquired
 
(6,810
)
Net purchase price
 
$
179,705

 
 
 

Estimated fair value of tangible assets acquired and liabilities assumed
 
 

       Cash
 
$
6,810

       Accounts receivable
 
7,713

       Inventory
 
7,333

       Fixed assets
 
479

       Other current and non-current assets
 
2,896

       Accounts payable
 
(3,287
)
       Accrued expenses
 
(4,672
)
       Other current and non-current liabilities
 
(1,210
)
       Deferred tax liability
 
(14,115
)
Estimated fair value of net tangible assets acquired
 
1,947

Estimated fair value of identifiable intangible assets
 
71,720

Estimated goodwill
 
112,848

Estimated fair value of net assets acquired
 
186,515

Less cash acquired
 
(6,810
)
Net purchase price
 
$
179,705

The amounts above represent the preliminary fair value estimates as of June 30, 2018 and are subject to subsequent adjustment as the Company obtains additional information during the measurement period and finalizes its fair value estimates. The preliminary identifiable intangible asset estimates include customer relationships of $52,600 with a useful life of 12.5 years, completed technology of $17,150 with a useful life of 9.5 years and backlog of $1,970 with a useful life of 1 year. Any subsequent adjustments to these fair value estimates occurring during the measurement period will result in an adjustment to goodwill.
The goodwill of $112,848 largely reflects the potential synergies and expansion of the Company's offerings across product lines and markets complementary to the Company's existing products and markets. The goodwill from this acquisition is reported under the Mercury Defense Systems ("MDS") reporting unit and is not tax deductible.
The revenues and income before income taxes from Themis included in the Company's consolidated results for the fiscal year ended June 30, 2018 were $27,190 and $1,325, respectively.

65

Table of Contents

Pro Forma Financial Information
The following table summarizes the supplemental statements of operations information on an unaudited pro forma basis, excluding the pro forma impact of the RTL, Delta and CES acquisitions, as if the Merger had occurred on July 1, 2016. The Company has not furnished pro forma financial information relating to RTL, Delta and CES because such information is not material to the Company's financial results.
 
 
Year Ended June 30,
 
 
2018
 
2017
Pro forma net revenues
 
$
530,340

 
$
455,002

Pro forma net income
 
$
38,584

 
$
12,248

Basic pro forma net earnings per share
 
$
0.83

 
$
0.29

Diluted pro forma net earnings per share
 
$
0.81

 
$
0.28

RICHLAND TECHNOLOGIES ACQUISITION
On July 3, 2017, the Company entered into a membership interest purchase agreement with RTL, pursuant to which, the Company acquired RTL on a cash-free, debt-free basis for a total purchase price of $5,798. RTL specializes in safety-critical and high integrity systems, software and hardware development as well as safety-certification services for mission-critical applications. The Company recognized primarily intangible assets including customer relationships, completed technology and goodwill based on its purchase price allocation. The Company has not furnished pro forma financial information relating to RTL because such information is not material to the Company's financial results.
DELTA ACQUISITION
On April 3, 2017, the Company entered into a membership interest purchase agreement with Delta, pursuant to which, the Company acquired Delta on a cash-free, debt-free basis for a total purchase price of $40,500, subject to net working capital and net debt adjustments. Delta is a designer and manufacturer of high-value RF, microwave and millimeter wave sub-assemblies and components for the military, aerospace and space markets. The acquisition and transaction related expenses were funded with cash on hand.
The following table presents the net purchase price and the fair values of the assets and liabilities of Delta:
 
Amounts 
Consideration transferred
 

Cash paid at closing
$
40,500

Net purchase price
$
40,500

 
 

Fair value of tangible assets acquired and liabilities assumed
 

Accounts receivable and cost in excess of billings
$
957

Inventory
4,452

Fixed assets
1,918

Other current and non-current assets
77

Current liabilities
(2,055
)
Fair value of net tangible assets acquired
5,349

Fair value of identifiable intangible assets
17,000

Goodwill
18,151

Fair value of net assets acquired
40,500

Net purchase price
$
40,500

On April 2, 2018, the measurement period for Delta expired. The identifiable intangible assets include customer relationships of $8,000 with a useful life of 9 years, completed technology of $5,900 with a useful life of 7 years and backlog of $3,100 with a useful life of 2 years.
The goodwill of $18,151 largely reflects the potential synergies and expansion of the Company's offerings across product lines and markets complementary to the Company's existing products and markets. The Delta acquisition expands the scale and

66

Table of Contents

breadth of the Company’s RF, microwave and millimeter wave capabilities, provides highly complementary program portfolio in missiles and munitions, deepens market penetration in core radar, electronic warfare ("EW"), and precision-guided munitions markets, and opens new growth opportunities in space launch, GPS, satellite communications and datalinks. The goodwill from this acquisition is reported under the Advanced Microelectronic Solutions (“AMS”) reporting unit.
The Company and the shareholders of Delta agreed to treat the acquisition of Delta as an asset purchase for tax purposes by filing the required election forms under IRC Section 338(h)(10). The Company has estimated the tax value of the intangible assets from this transaction and is amortizing the amount over 15 years for tax purposes. As of June 30, 2018, the Company had $16,991 of goodwill deductible for tax purposes. The Company has not furnished pro forma financial information relating to Delta because such information is not material to the Company's financial results.
CES ACQUISITION
On November 4, 2016, the Company and the shareholders of CES entered into a Stock Purchase Agreement, pursuant to which, Mercury acquired CES for a total purchase price of $39,123, subject to net working capital and net debt adjustments. The acquisition and associated transaction expenses were funded with cash on hand. Based in Geneva, Switzerland, CES is a leading provider of embedded solutions for military and aerospace mission-critical computing applications. CES specializes in the design, development and manufacture of safety-certifiable product and subsystems solutions including: primary flight control units, flight test computers, mission computers, command and control processors, graphics and video processing and avionics-certified Ethernet and IO. CES products and solutions are used on platforms such as aerial refueling tankers and multi-mission aircraft, as well as the several types of unmanned platforms.
The following table presents the net purchase price and the fair values of the assets and liabilities of CES:
 
Amounts 
Consideration transferred
 

Cash paid at closing
$
39,123

Working capital adjustment
(330
)
Net purchase price
$
38,793

 
 

Fair value of tangible assets acquired and liabilities assumed
 

Accounts receivable and cost in excess of billings
$
2,698

Inventory
8,950

Fixed assets
1,480

Other current and non-current assets
748

Current liabilities
(3,154
)
Non-current liabilities
(6,140
)
Deferred tax liabilities
(1,148
)
Fair value of net tangible assets acquired
3,434

Fair value of identifiable intangible assets
14,722

Goodwill
20,637

Fair value of net assets acquired
38,793

Net purchase price
$
38,793

On November 4, 2017, the measurement period for CES expired. The identifiable intangible assets include customer relationships of $9,060 with a useful life of 9 years and completed technology of $5,662 with a useful life of 7 years.
The goodwill of $20,637 largely reflects the potential synergies and expansion of the Company's offerings across product lines and markets complementary to the Company's existing products and markets. CES provides the Company with capabilities in mission computing, safety-critical avionics and platform management that are in demand from its customers. These new capabilities will also substantially expand Mercury’s addressable market into commercial aerospace, defense platform management, C4I and mission computing markets that are aligned to Mercury’s existing market focus. The acquisition is directly aligned with the Company's strategy of expanding its capabilities, services and offerings along the sensor processing chain. The goodwill from this acquisition is reported under the Sensor and Mission Processing (“SMP”) reporting unit. The Company has not furnished pro forma financial information relating to CES because such information is not material to the Company's financial results.

67

Table of Contents

D.
Fair Value of Financial Instruments
The following table summarizes the Company’s financial assets measured at fair value on a recurring basis at June 30, 2018:
 
Fair Value Measurements
 
June 30, 2018
 
Level 1
 
Level 2
 
Level 3
Assets:
 
 
 
 
 
 
 
Certificates of deposit
$
1,056

 
$

 
$
1,056

 
$

Total
$
1,056

 
$

 
$
1,056

 
$

The following table summarizes the Company’s financial assets measured at fair value on a recurring basis at June 30, 2017: 
 
Fair Value Measurements
 
June 30, 2017
 
Level 1
 
Level 2
 
Level 3
Assets:
 
 
 
 
 
 
 
Certificates of deposit
$
1,043

 
$

 
$
1,043

 
$

Total
$
1,043

 
$

 
$
1,043

 
$

The carrying values of cash and cash equivalents, including money market funds, restricted cash, accounts receivable and payable, and accrued liabilities approximate fair value due to the short-term maturities of these assets and liabilities. The fair value of the Company’s certificates of deposit are determined through quoted prices for identical or similar instruments in markets that are not active or are directly or indirectly observable.
E.Inventory
Inventory was comprised of the following:
 
June 30,
 
2018
 
2017
Raw materials
$
61,748

 
$
48,645

Work in process
30,841

 
22,567

Finished goods
15,996

 
9,859

Total
$
108,585

 
$
81,071

The $27,514 increase in inventory was primarily due to an increase in overall demand, especially for larger, more complex sub-assemblies and integrated sub-systems, an investment in component and safety stock inventory for the transition to insourced manufacturing, and the acquisition of Themis. There are no amounts in inventory relating to contracts having production cycles longer than one year.
F.
Property and Equipment
Property and equipment consisted of the following:
 
Estimated Useful Lives
(Years)
 
June 30,
2018
 
2017
Computer equipment and software
3-4
 
$
71,799

 
$
64,374

Furniture and fixtures
5
 
4,927

 
4,810

Leasehold improvements
lesser of estimated useful life or lease term
 
21,552

 
19,092

Machinery and equipment
5-10
 
47,419

 
42,193

 
 
 
145,697

 
130,469

Less: accumulated depreciation
 
 
(94,717
)
 
(78,826
)
 
 
 
$
50,980

 
$
51,643

The $663 decrease in property and equipment was primarily due to the full year impact of accumulated depreciation associated with the build-out of the Company's new corporate headquarters, integration activities associated with recently acquired businesses, partially offset by current year additions, including the property and equipment associated with the acquisition of Themis. During

68

Table of Contents

fiscal 2018 and 2017, the Company retired $611 and $14,310, respectively, of computer equipment and software, furniture, and fixtures, leasehold improvements, and machinery and equipment that were no longer in use by the Company. 
Depreciation expense related to property and equipment for the fiscal years ended June 30, 2018, 2017 and 2016 was $16,273, $12,589 and $6,900, respectively.
G.Goodwill
The following table sets forth the changes in the carrying amount of goodwill by reporting unit for the year ended June 30, 2018:
 
 
SMP
 
AMS
 
MDS
 
Total
Balance at June 30, 2017
 
$
116,003

 
$
217,956

 
$
46,887

 
$
380,846

Goodwill adjustment for the CES acquisition
 
291

 

 

 
291

Goodwill adjustment for the Delta acquisition
 

 
191

 

 
191

Goodwill arising from the RTL acquisition
 
3,266

 

 

 
3,266

Goodwill arising from the Themis acquisition
 

 

 
112,848

 
112,848

Balance at June 30, 2018
 
$
119,560

 
$
218,147

 
$
159,735

 
$
497,442

As defined by ASC 350, goodwill is tested for impairment on an interim basis at the occurrence of certain triggering events or at a minimum on an annual basis. In fiscal 2018, there were no triggering events which required an interim goodwill impairment test. The Company performed its annual goodwill impairment test in the fourth quarter of fiscal 2018 with no impairment noted.
H.
Intangible Assets
Intangible assets consisted of the following:
 
Gross
Carrying
Amount
 
Accumulated
Amortization
 
Net
Carrying
Amount
 
Weighted
Average
Useful
Life
June 30, 2018
 
 
 
 
 
 
 
Customer relationships
$
171,940

 
$
(46,505
)
 
$
125,435

 
10.7 years
Licensing agreements and patents
1,506

 
(640
)
 
866

 
3.5 years
Completed technologies
62,392

 
(13,101
)
 
49,291

 
8.1 years
Backlog
7,650

 
(5,338
)
 
2,312

 
1.6 years
 
$
243,488

 
$
(65,584
)
 
$
177,904

 
 
June 30, 2017
 
 
 
 
 
 
 
Customer relationships
$
117,630

 
$
(31,533
)
 
$
86,097

 
10.0 years
Licensing agreements and patents
1,131

 
(277
)
 
854

 
3.7 years
Completed technologies
44,503

 
(6,079
)
 
38,424

 
7.9 years
Backlog
5,430

 
(1,768
)
 
3,662

 
2.0 years
 
$
168,694

 
$
(39,657
)
 
$
129,037

 
 
Estimated future amortization expense for intangible assets remaining at June 30, 2018 is as follows:
 
Year Ending
June 30,
2019
$
25,372

2020
21,524

2021
20,867

2022
20,771

2023
18,789

Thereafter
70,581

Total future amortization expense
$
177,904


69

Table of Contents

The following table summarizes the preliminary estimated fair value of acquired intangible assets arising as a result of the Themis acquisition. These assets are included in the Company's gross and net carrying amounts as of June 30, 2018.
 
Gross
Carrying
Amount
 
Accumulated
Amortization
 
Net
Carrying
Amount
 
Weighted Average
Useful
Life
Customer relationships
$
52,600

 
$
(1,753
)
 
$
50,847

 
12.5 years
Completed technologies
17,150

 
(752
)
 
16,398

 
9.5 years
Backlog
1,970

 
(821
)
 
1,149

 
1.0 year
 
$
71,720

 
$
(3,326
)
 
$
68,394

 
 
I.Restructuring
During fiscal 2018, the Company incurred $3,159 of restructuring and other charges primarily related to the elimination of 38 positions predominantly in R&D and operations functions as well as executive severance. Restructuring and other charges are typically related to acquisitions and organizational redesign programs initiated as part of discrete post-acquisition integration activities.
During the fourth quarter of fiscal 2017, the Company initiated a plan to close its Manteca, California facility as a result of the acquisition of Delta. The Company incurred $910 of severance and related expenses in conjunction with the elimination of 33 positions primarily in operations functions related to the planned closure of the facility. Additionally, the Company incurred $1,042 in restructuring expenses related to other various restructuring events during fiscal 2017.
During fiscal 2016, the Company incurred restructuring and other charges of $1,240, primarily related to executive severance and facility consolidation.
All of the restructuring and other charges are classified as operating expenses in the consolidated statements of operations and any remaining severance obligations are expected to be paid within the next twelve months. The remaining restructuring liability is classified as accrued expenses in the consolidated balance sheets.
The following table presents the detail of expenses for the Company’s restructuring plans:
 
Severance & Related
 
Facilities & Other
 
Total
Restructuring liability at June 30, 2016
$
190

 
$
736

 
$
926

Restructuring charges
1,706

 
253

 
1,959

Cash paid
(524
)
 
(989
)
 
(1,513
)
Reversals (*)
(7
)
 

 
(7
)
Restructuring liability at June 30, 2017
1,365

 

 
1,365

Restructuring charges
3,181

 
230

 
3,411

Cash paid
(2,546
)
 
(177
)
 
(2,723
)
Reversals (*)
(199
)
 
(53
)
 
(252
)
Restructuring liability at June 30, 2018
$
1,801

 
$

 
$
1,801

(*) Reversals result from the unused outplacement services and operating costs.
J.Income Taxes
On December 22, 2017, the Tax Cuts and Jobs Act of 2017 (the “Tax Act”) was enacted by the U.S. government. The Tax Act has impacted the U.S. corporate tax rate that the Company will use going forward, which has been reduced to 21% from 35%. As the Company has a June 30 fiscal year-end, the lower U.S. corporate tax rate will be phased in, resulting in a U.S. corporate tax rate of approximately 28% for the Company's fiscal year ended June 30, 2018, and 21% for subsequent fiscal years.
The Tax Act also includes items that the Company expects will increase its tax expense including, but not limited to, the elimination of the domestic manufacturing deduction and increased limitations on deductions for executive compensation. In addition, the actual effective tax rate may be materially different than the statutory Federal tax rate (including being higher) based on the availability and impact of various other adjustments including, but not limited to, state taxes, Federal research and development credits, discrete tax benefits related to stock compensation, and the inclusion or exclusion of various items in taxable income which may differ from GAAP income.
To transition to the reduced U.S. corporate tax rate, adjustments were required to be made to the Company’s U.S. deferred tax assets and liabilities, as well as discrete tax items recorded prior to the Tax Act. For the year ended June 30, 2018, these

70

Table of Contents

adjustments resulted in a tax benefit of $861. The Tax Act also provided for a one-time deemed mandatory repatriation of post-1986 undistributed foreign subsidiary earnings and profits (“E&P”) through December 31, 2017. The Company had an estimated $5,627 of undistributed foreign E&P subject to the deemed mandatory repatriation and recognized a provisional $801 of income tax expense for the year ended June 30, 2018. After the utilization of existing tax credits, the Company expects to pay additional U.S. federal cash taxes of approximately $386 on the deemed mandatory repatriation, payable over eight years. No additional provision for U.S. federal or foreign taxes has been made on unrepatriated foreign earnings as it is not practicable to determine the amount of other taxes that would be payable if these amounts were repatriated to the U.S.
On December 22, 2017, the SEC staff issued Staff Accounting Bulletin No. 118 (“SAB 118”) to address the application of U.S. GAAP in situations when a registrant does not have the necessary information available, prepared, or analyzed (including computations) in reasonable detail to complete the accounting for certain income tax effects of the Tax Act. The Company has recognized the provisional tax impacts related to deemed repatriated earnings and the revaluation of deferred tax assets and liabilities and included these amounts in its consolidated financial statements for the year ended June 30, 2018. The ultimate impact may differ from these provisional amounts due to additional regulatory guidance that may be issued and changes in interpretations and assumptions the Company has made. The Company does not expect the final amounts to be materially different than those recorded.
The components of income before income taxes and income tax expense were as follows:
 
Year Ended June 30,
 
2018
 
2017
 
2016
Income before income taxes:
 
 
 
 
 
United States
$
43,368

 
$
30,499

 
$
25,194

Foreign
(795
)
 
569

 
92

 
$
42,573

 
$
31,068

 
$
25,286

Tax provision (benefit):
 
 
 
 
 
Federal:
 
 
 
 
 
Current
$
4,470

 
$
11,476

 
$
6,707

Deferred
(4,527
)
 
(7,645
)
 
(2,627
)
 
$
(57
)
 
$
3,831

 
$
4,080

State:
 
 
 
 
 
Current
$
2,370

 
$
3,650

 
$
1,839

Deferred
(537
)
 
(1,684
)
 
(424
)
 
$
1,833

 
$
1,966

 
$
1,415

Foreign:
 
 
 
 
 
Current
$
186

 
$
240

 
$
59

Deferred
(272
)
 
156

 
(10
)
 
(86
)
 
396

 
49

 
$
1,690

 
$
6,193

 
$
5,544


71

Table of Contents

The following is the reconciliation between the statutory federal income tax rate and the Company’s effective income tax rate:
 
Year Ended June 30,
 
2018
 
2017
 
2016
Tax provision at federal statutory rates
28.0
 %
 
35.0
 %
 
35.0
 %
State income tax, net of federal tax benefit
5.6

 
4.9

 
5.0

Research and development credits
(5.1
)
 
(6.1
)
 
(8.4
)
Excess tax benefits on stock compensation
(18.5
)
 
(13.1
)
 
(4.4
)
Domestic manufacturing deduction
(2.0
)
 
(3.9
)
 
(3.5
)
Income from legal settlement excluded from taxable income

 

 
(2.8
)
Deemed repatriation of foreign earnings
1.9

 
(0.1
)
 
(0.2
)
Foreign income tax rate differential
0.3

 
0.2

 

Officer and equity compensation
1.7

 
1.8

 
2.6

Acquisition costs
1.4

 
0.9

 

Reserves for tax contingencies
0.3

 
(0.6
)
 
(3.2
)
Benefit from tax rate changes
(2.3
)
 

 

Impacts related to acquired tax attributes
(8.7
)
 

 

Other
1.4

 
0.9

 
1.8

 
4.0
 %
 
19.9
 %
 
21.9
 %
The effective tax rate for fiscal 2018 differed from the federal statutory rate primarily due to benefits related to research and development tax credits, domestic manufacturing deductions, excess tax benefits for equity compensation, and acquired tax attributes. These benefits are partially offset by additional tax expense for state and local income taxes, non-deductible officer compensation and non-deductible equity compensation. During fiscal 2018 and 2017, the Company recognized a discrete tax benefit of $7,897 and $4,066, respectively, related to excess tax benefits on stock-based compensation. The discrete tax benefit for fiscal 2018 included the enactment of the Tax Act. The benefit is the result of the increase in value from the stock award between the grant date and the vest date. Fiscal 2018 also included discrete tax benefits of $3,716 derived from new information obtained about net operating loss carry-forwards of the Carve-Out Business acquired from Microsemi Corporation in May 2016. The discrete items disclosed above for fiscal 2018 included the effect of the Tax Act.

72

Table of Contents

The components of the Company’s net deferred tax liabilities were as follows:
 
June 30,
 
2018
 
2017
Deferred tax assets:
 
 
 
Inventory valuation and receivable allowances
$
8,476

 
$
13,845

Accrued compensation
3,803

 
4,555

Equity compensation
3,944

 
4,858

Federal and state research and development tax credit carryforwards
18,784

 
13,415

Other accruals
1,085

 
2,125

Deferred compensation
1,561

 
1,606

Acquired net operating loss carryforward

1,634

 

Capital loss carryforwards
2,413

 
3,562

Other temporary differences
1,565

 
1,500

 
43,265

 
45,466

Valuation allowance
(16,992
)
 
(16,570
)
Total deferred tax assets
26,273

 
28,896

Deferred tax liabilities:
 
 
 
Prepaid expenses
(696
)
 
(481
)
Property and equipment
(4,436
)
 
(3,749
)
Intangible assets
(34,546
)
 
(28,163
)
Tax method of accounting change

 
(285
)
Other temporary differences
(230
)
 
(441
)
Total deferred tax liabilities
(39,908
)
 
(33,119
)
Net deferred tax (liabilities) assets
$
(13,635
)
 
$
(4,223
)
 
 
 
 
As reported:
 
 
 
Deferred tax assets
$

 
$
633

Deferred tax liabilities
(13,635
)
 
(4,856
)
 
$
(13,635
)
 
$
(4,223
)
At June 30, 2018, the Company evaluated the need for a valuation allowance on deferred tax assets. In assessing whether the deferred tax assets are realizable, management considered whether it is more likely than not that some portion or all of the deferred tax assets will not be realized. The ultimate realization of deferred tax assets is dependent upon the Company's past operating results, its forecast of future earnings, future taxable income, and tax planning strategies. The Company continues to conclude that it is more likely than not that most domestic deferred tax assets would be realizable based on recent financial performance, projected future taxable income and the reversal of existing deferred tax liabilities.
The Company continues to record a full valuation allowance on capital loss carryforwards and certain state research and development credits as of June 30, 2018 as management continues to believe that it is not more likely than not that these deferred tax assets would be realized. Any future reversals of the valuation allowance will impact income tax expense.
The Company had federal research and development credit carryforwards of $1,227, which will begin to expire in 2029. The Company had state research and development credit carryforwards of $17,557, which will expire from 2018 through 2033.
The Company files income tax returns in all jurisdictions in which it operates. The Company has established reserves to provide for additional income taxes that management believes will more likely than not be due in future years as these previously filed tax returns are audited. These reserves have been established based upon management’s assessment as to the potential exposures. All tax reserves are analyzed quarterly and adjustments are made as events occur and warrant modification.


73

Table of Contents

The changes in the Company’s reserves for unrecognized income tax benefits are summarized as follows:
 
Year Ended June 30,
 
2018
 
2017
Unrecognized tax benefits, beginning of period
$
804

 
$
1,566

Increases for previously recognized positions

 
46

Settlements of previously recognized positions

 
(793
)
Reductions as a result of a lapse of the applicable statute of limitations
(81
)
 
(273
)
Increases for currently recognized positions
315

 
384

Reductions for previously recognized positions
(40
)
 
(126
)
Unrecognized tax benefits, end of period
$
998

 
$
804

The $998 of unrecognized tax benefits as of June 30, 2018, if released, would reduce income tax expense.
The Company includes interest and penalties related to unrecognized tax benefits within the provision for income taxes. As of June 30, 2018 and 2017, the total amount of gross interest and penalties accrued were $84 and $54, respectively. In connection with tax matters, the Company recognized interest and penalty expense in fiscal 2018, 2017 and 2016 of $42, $30 and $204, respectively.
The Company’s major tax jurisdiction is the U.S. and the open tax years are fiscal 2015 through 2018.
K.Commitments and Contingencies
LEGAL CLAIMS
The Company is subject to litigation, claims, investigations and audits arising from time to time in the ordinary course of business. Although legal proceedings are inherently unpredictable, the Company believes that it has valid defenses with respect to any matters currently pending against the Company and intends to defend itself vigorously. The outcome of these matters, individually and in the aggregate, is not expected to have a material impact on the Company's cash flows, results of operations, or financial position.
INDEMNIFICATION OBLIGATIONS
The Company's standard product sales and license agreements entered into in the ordinary course of business typically contain an indemnification provision pursuant to which the Company indemnifies, holds harmless, and agrees to reimburse the indemnified party for losses suffered or incurred by the indemnified party in connection with any patent, copyright or other intellectual property infringement claim by any third party with respect to the Company's products. Such provisions generally survive termination or expiration of the agreements. The potential amount of future payments the Company could be required to make under these indemnification provisions is, in some instances, unlimited.
PURCHASE COMMITMENTS
As of June 30, 2018, the Company has entered into non-cancelable purchase commitments for certain inventory components and services used in its normal operations. The purchase commitments covered by these agreements are for less than one year and aggregate to $50,285.

74

Table of Contents

LEASE COMMITMENTS
The Company leases certain facilities, machinery and equipment under various cancelable and non-cancelable operating leases that expire at various dates through fiscal 2029. The leases contain various renewal options. Rental charges are subject to escalation for increases in certain operating costs of the lessor. For tenant improvement allowances and rent holidays, the Company records a deferred rent liability on the consolidated balance sheets and amortizes the deferred rent over the terms of the leases as reductions to rent expense on the consolidated statements of operations. Rental expense during the fiscal years ended June 30, 2018, 2017, and 2016 was $6,534, $7,774 and $4,015, respectively. Minimum lease payments under the Company’s non-cancelable operating leases are as follows:
 
Year Ending
June 30,
2019
$
8,790

2020
9,017

2021
7,745

2022
7,424

2023
6,772

Thereafter
22,864

Total minimum lease payments
$
62,612

OTHER
As part of the Company's strategy for growth, the Company continues to explore acquisitions or strategic alliances. The associated acquisition costs incurred in the form of professional fees and services may be material to the future periods in which they occur, regardless of whether the acquisition is ultimately completed.
The Company may elect from time to time to purchase and subsequently retire shares of common stock in order to settle an individual employees’ tax liability associated with vesting of a restricted stock award or exercise of stock options. These transactions would be treated as a use of cash in financing activities in the Company's statement of cash flows.
L.Debt
Revolving Credit Facilities
On May 2, 2016, the Company and certain of its subsidiaries, as guarantors, entered into a Credit Agreement (the “Credit Agreement”) with a syndicate of commercial banks and Bank of America, N.A acting as the administrative agent. The Credit Agreement provided for a $200,000 term loan facility (“the Term Loan”) and a $100,000 revolving credit facility (“Revolver”).
On June 27, 2017, the Company amended the Credit Agreement to increase and extend the borrowing capacity of the Revolver to $400,000 expiring in June 2022 (“the Amended Credit Agreement”). In connection with the amendment, the Company also repaid the remaining principal and accrued and unpaid interest outstanding on the Term Loan using cash on hand. The Company evaluated the amended Credit Agreement under ASC 470, Debt, and determined that the amendment represented a modification of the Credit Agreement. Accordingly, $6,522 in unamortized debt issuance costs at June 27, 2017, in addition to $591 in new fees paid to the syndicate of lenders in connection with the amendment are being amortized to other income (expense), net on a straight line basis over the new term of the Revolver. As of June 30, 2018, the Company's outstanding balance of unamortized deferred financing costs was $5,326. As of June 30, 2018, there were outstanding borrowings of $195,000 against the Revolver, resulting in interest expense of $2,850 for the year ended June 30, 2018. There were also outstanding letters of credit of $2,771 as of June 30, 2018.
Maturity
The Revolver has a five year maturity.
Interest Rates and Fees
Borrowings under the Revolver bear interest, at the Company’s option, at floating rates tied to LIBOR or the prime rate plus an applicable percentage. The applicable percentage is set at LIBOR plus 1.5% and is established pursuant to a pricing grid based on the Company's total net leverage ratio. As of June 30, 2018, the stated interest rate on the Revolver was 3.86% per annum.
In addition to interest on the aggregate outstanding principal amounts of any borrowings, the Company will also pay a quarterly commitment fee on the unutilized commitments under the Revolver. The applicable percentage is pursuant to a pricing grid based on the Company's total net leverage ratio. As of June 30, 2018, the stated interest rate for unutilized commitments was 0.25% per annum. The Company will also pay customary letter of credit and agency fees.

75

Table of Contents

Covenants and Events of Default
The Amended Credit Agreement provides for customary negative covenants. The Amended Credit Agreement also requires the Company to comply with certain financial covenants, including a quarterly minimum consolidated cash interest charge ratio test and a quarterly maximum consolidated total net leverage ratio test.
The Amended Credit Agreement also provides for customary representations and warranties, affirmative covenants and events of default. If an event of default occurs, the lenders under the Amended Credit Agreement will be entitled to take various actions, including the termination of unutilized commitments, the acceleration of amounts outstanding under the Amended Credit Agreement and all actions permitted to be taken by a secured creditor. As of June 30, 2018, the Company was in compliance with all covenants and conditions under the Amended Credit Agreement.
Guarantees and Security
The Company's obligations under the Amended Credit Agreement are guaranteed by certain of its material domestic wholly-owned restricted subsidiaries (the “Guarantors”). The obligations of both the Company and the Guarantors are secured by a perfected security interest in substantially all of the assets of the Company and the Guarantors, in each case, now owned or later acquired, including a pledge of all of the capital stock of substantially all of its domestic wholly-owned restricted subsidiaries and 65% of the capital stock of certain of its foreign restricted subsidiaries, subject in each case to the exclusion of certain assets and additional exceptions.
M.Employee Benefit Plans
Pension Plan
With the acquisition of CES on November 4, 2016, the Company assumed a pension plan (the "Plan") for its Swiss employees, which is administered by an independent pension fund. The Plan is mandated by Swiss law and meets the criteria for a defined benefit plan under ASC 715, Compensation—Retirement Benefits (“ASC 715”), since participants of the Plan are entitled to a defined rate of return on contributions made. The independent pension fund is a multi-employer plan with unrestricted joint liability for all participating companies for which the Plan’s overfunding or underfunding is allocated to each participating company based on an allocation key determined by the Plan.
The Company recognizes a net asset or liability for the Plan equal to the difference between the projected benefit obligation of the Plan and the fair value of the Plan’s assets as required by ASC 715. The funded status may vary from year to year due to changes in the fair value of the Plan’s assets and variations on the underlying assumptions of the projected benefit obligation of the Plan.
On January 1, 2017, the Company changed pension providers. The Company's results contain the effects of the change in pension provider as prior service costs. These prior service costs will be amortized from AOCI to net periodic benefit costs over approximately 10 years.
On January 1, 2019, the independent pension fund will change the conversion rate for accumulated retirement savings. The Company’s results contain the effects of this change in conversion rates by the independent pension fund as prior service costs. These prior service costs will be amortized from AOCI to net periodic benefit costs over approximately 10 years.
At June 30, 2018, the accumulated benefit obligation of the Plan equals the fair value of the Plan's assets. The Plan's funded status at June 30, 2018 and 2017 was a net liability of $6,098 and $6,601, respectively, which is recorded in other non-current liabilities on the consolidated balance sheets. The Company recorded net gains of $354 and $220 in AOCI during the year ended June 30, 2018 and 2017, respectively. Total employer contributions to the Plan were $596 during the year ended June 30, 2018, and the Company's total expected employer contributions to the Plan during fiscal 2019 are $642.
The following table reflects the total pension benefits expected to be paid from the Plan, which is funded from contributions by participants and the Company.
 
 
Year Ended
June 30,
2019
 
$
603

2020
 
892

2021
 
573

2022
 
720

2023
 
1,012

Thereafter (next 5 years)
 
3,944

Total
 
$
7,744


76


The following table outlines the components of net periodic benefit cost of the Plan for the year ended June 30, 2018 and 2017:
 
Year Ended June 30,
 
2018
 
2017
Service cost
$
835

 
$
557

Interest cost
121

 
73

Expected return on assets
(162
)
 
(105
)
Amortization of prior service cost
39

 
20

Net periodic benefit cost
$
833

 
$
545

The following table reflects the related actuarial assumptions used to determine net periodic benefit cost of the Plan for the year ended June 30, 2018 and 2017:
 
Year Ended June 30,
 
2018
 
2017
Discount rate
0.85
%
 
0.70
%
Expected rate of return on Plan assets
1.50
%
 
1.50
%
Expected inflation
1.00
%
 
1.00
%
Rate of compensation increases
1.20
%
 
1.00
%
The calculation of the projected benefit obligation ("PBO") utilized BVG 2015 Generational data for assumptions related to the mortality rates, disability rates, turnover rates, and early retirement ages.
The PBO represents the present value of Plan benefits earned through the end of the year, with an allowance for future salary and pension increases as well as turnover rates. The following table presents the change in projected benefit obligation for the periods presented:
 
Year Ended June 30,
 
2018
 
2017
Projected benefit obligation, beginning
$
17,526

 
$
16,800

Service cost
835

 
557

Interest cost
121

 
73

Employee contributions
1,931

 
581

Actuarial gain
466

 
(598
)
Benefits paid
(1,215
)
 
(563
)
Plan amendment
(941
)
 
390

Foreign exchange (gain) loss
(596
)
 
286

Projected benefit obligation at end of year
$
18,127

 
$
17,526

The following table presents the change in Plan assets for the periods presented:
 
Year Ended June 30,
 
2018
 
2017
Fair value of Plan assets, beginning
$
10,925

 
$
10,276

Actual return on Plan assets
167

 
100

Company contributions
608

 
348

Employee contributions
1,931

 
581

Benefits paid
(1,215
)
 
(563
)
Foreign exchange (loss) gain
(387
)
 
183

Fair value of Plan assets at end of year
$
12,029

 
$
10,925


77


The following table presents the Company's reconciliation of funded status for the period presented:
 

June 30, 2018
 

June 30, 2017
Projected benefit obligation at end of year
$
18,127

 
$
17,526

Fair value of plan assets at end of year
12,029

 
10,925

Funded status
$
(6,098
)
 
$
(6,601
)
The Company did not recognize any (gain) loss from other comprehensive income ("OCI") in its consolidated results of operations during the years ended June 30, 2018 and 2017. The Company does not expect to recognize any (gain) loss from OCI for the year ended June 30, 2019.
The fair value of Plan assets were $12,029 at June 30, 2018. The Plan is denominated in a foreign currency, the Swiss Franc, which can have an impact on the fair value of Plan assets. The Plan was not subject to material fluctuations during years ended June 30, 2018 or 2017. The Plan’s assets are administered by an independent pension fund foundation (the “foundation”). As of June 30, 2018, the foundation has invested the assets of the Plan in various investments vehicles, including cash, real estate, equity securities, and bonds. The investments are measured at fair value using a mix of Level 1, Level 2 and Level 3 inputs.
401(k) Plan
The Company maintains a qualified 401(k) plan (the “401(k) Plan”) for its U.S. employees. During fiscal 2018, 2017 and 2016, the Company matched employee contributions up to 3% of eligible compensation. The Company may also make optional contributions to the plan for any plan year at its discretion. Expense recognized by the Company for matching contributions related to the 401(k) plan was $3,684, $3,206 and $1,874 during the fiscal years ended June 30, 2018, 2017, and 2016, respectively.
N.    Shareholders’ Equity
PREFERRED STOCK
The Company is authorized to issue 1,000 shares of preferred stock with a par value of $0.01 per share.
SHELF REGISTRATION STATEMENT
On August 28, 2017, the Company filed a shelf registration statement on Form S-3ASR with the SEC. The shelf registration statement, which was effective upon filing with the SEC, registered each of the following securities: debt securities, preferred stock, common stock, warrants and units. The Company has an unlimited amount available under the shelf registration statement. Additionally, as part of the shelf registration statement, the Company has entered into an equity distribution agreement which allows the Company to sell an aggregate of up to $200,000 of its common stock from time to time through its agents.
FOLLOW-ON EQUITY OFFERINGS
On January 26, 2017, the Company announced the commencement of an underwritten public offering of its common stock, par value $0.01 per share. On February 1, 2017, the Company closed the offering, including the full over-allotment allocation, selling an aggregate of 6,900 shares of common stock at a price to the public of $33.00 for total net proceeds of $215,725.
O.    Stock-Based Compensation
STOCK OPTION PLANS
The number of shares authorized for issuance under the Company’s 2005 Stock Incentive Plan, as amended and restated (the “2005 Plan”), is 15,252 shares at June 30, 2018. The 2005 Plan provides for the grant of non-qualified and incentive stock options, restricted stock, stock appreciation rights and deferred stock awards to employees and non-employees. All stock options are granted with an exercise price of not less than 100% of the fair value of the Company’s common stock at the date of grant and the options generally have a term of seven years. There were 1,614 shares available for future grant under the 2005 Plan at June 30, 2018.
As part of the Company's ongoing annual equity grant program for employees, the Company grants performance-based restricted stock awards to certain executives pursuant to the 2005 Plan. Performance awards vest based on the requisite service period subject to the achievement of specific financial performance targets. Based on the performance targets, some of these awards require graded vesting which results in more rapid expense recognition compared to traditional time-based vesting over the same vesting period. The Company monitors the probability of achieving the performance targets on a quarterly basis and may adjust periodic stock compensation expense accordingly. The performance targets include: (i) the achievement of internal performance targets only, and (ii) the achievement of internal performance targets in relation to a peer group of companies.

78

Table of Contents

EMPLOYEE STOCK PURCHASE PLAN
The number of shares authorized for issuance under the Company’s 1997 Employee Stock Purchase Plan, as amended and restated (“ESPP”), is 1,800 shares. Under the ESPP, rights are granted to purchase shares of common stock at 85% of the lesser of the market value of such shares at either the beginning or the end of each six-month offering period. The ESPP permits employees to purchase common stock through payroll deductions, which may not exceed 10% of an employee’s compensation as defined in the ESPP. The number of shares issued under the ESPP during fiscal years 2018, 2017, and 2016 was 82, 96 and 88, respectively. Shares available for future purchase under the ESPP totaled 220 at June 30, 2018.
STOCK OPTION AND AWARD ACTIVITY
The following table summarizes activity of the Company’s stock option plans since June 30, 2016: 
 
Options Outstanding
 
Number of
Shares
 
Weighted Average
Exercise Price
 
Weighted Average
Remaining
Contractual Term
(Years)
 
Aggregate
Intrinsic Value as
of 6/30/2018
Outstanding at June 30, 2016
258

 
$
13.34

 
1.06
 
 
Granted

 

 
 
 
 
Exercised
(207
)
 
13.29

 
 
 
 
Cancelled

 

 
 
 
 
Outstanding at June 30, 2017
51

 
$
13.53

 
0.60
 
 
Granted

 

 
 
 
 
Exercised
(47
)
 
14.12

 
 
 
 
Cancelled

 

 
 
 
 
Outstanding at June 30, 2018
4

 
$
5.52

 
3.13
 
$
114

Vested and expected to vest at June 30, 2018
4

 
$
5.52

 
3.13
 
$
114

Exercisable at June 30, 2018
4

 
$
5.52

 
3.13
 
$
114

The intrinsic value of the options exercised during fiscal years 2018, 2017, and 2016 was $1,780, $3,762 and $1,976, respectively. Non-vested stock options are subject to the risk of forfeiture until the fulfillment of specified conditions. As of June 30, 2018 and 2017, there was $0 of total unrecognized compensation cost related to non-vested options granted under the Company’s stock plans. There were no stock options granted during fiscal years 2018, 2017 or 2016.
The following table summarizes the status of the Company’s non-vested restricted stock awards since June 30, 2016:
 
Non-Vested Restricted Stock Awards
 
Number of
Shares
 
Weighted Average
Grant Date
Fair Value
Outstanding at June 30, 2016
1,666

 
$
13.09

Granted
718

 
24.72

Vested
(769
)
 
11.94

Forfeited
(51
)
 
15.02

Outstanding at June 30, 2017
1,564

 
$
18.93

Granted
521

 
47.28

Vested
(821
)
 
46.71

Forfeited
(129
)
 
31.41

Outstanding at June 30, 2018
1,135

 
$
27.26

The total fair value of restricted stock awards vested during fiscal years 2018, 2017, and 2016 was $38,344, $19,402 and $12,185, respectively.
Non-vested restricted stock awards are subject to the risk of forfeiture until the fulfillment of specified conditions. As of June 30, 2018, there was $24,740 of total unrecognized compensation cost related to non-vested restricted stock awards granted under the Company’s stock plans that is expected to be recognized over a weighted-average period of 2.3 years from June 30, 2018. As of June 30, 2017, there was $12,160 of total unrecognized compensation cost related to non-vested restricted stock awards granted under the Company’s stock plans that is expected to be recognized over a weighted-average period of 1.5 years from June 30, 2017.

79

Table of Contents

STOCK-BASED COMPENSATION EXPENSE
The Company recognizes expense for its share-based payment plans in the consolidated statements of operations for the fiscal years 2018, 2017, and 2016 in accordance with ASC 718. The Company had $317, $194 and $93 of capitalized stock-based compensation expense on the consolidated balance sheet as of June 30, 2018, 2017, and 2016, respectively. Under the fair value recognition provisions of ASC 718, stock-based compensation cost is measured at the grant date based on the value of the award and is recognized as expense over the service period. The following table presents share-based compensation expenses from continuing operations included in the Company’s consolidated statement of operations:
 
Year Ended June 30,
 
2018
 
2017
 
2016
Cost of revenues
$
502

 
$
531

 
$
441

Selling, general and administrative
14,828

 
13,212

 
7,864

Research and development
1,984

 
1,598

 
1,269

Stock-based compensation expense before tax
17,314

 
15,341

 
9,574

Income taxes
(5,713
)
 
(5,874
)
 
(3,727
)
Stock-based compensation expense, net of income taxes
$
11,601

 
$
9,467

 
$
5,847

P.    Operating Segment, Geographic Information and Significant Customers
Operating segments are defined as components of an enterprise evaluated regularly by the Company's chief operating decision maker (“CODM”) in deciding how to allocate resources and assess performance. The Company is comprised of one operating and reportable segment. The Company utilized the management approach for determining its operating segment in accordance with ASC 280, Segment Reporting.
The geographic distribution of the Company’s revenues as determined by order origination based on the country in which the Company's legal subsidiary is domiciled is summarized as follows:
 
U.S.
 
Europe
 
Asia Pacific 
 
Eliminations
 
Total
YEAR ENDED JUNE 30, 2018
 
 
 
 
 
 
 
 
 
Net revenues to unaffiliated customers
$
450,218

 
$
35,000

 
$
7,966

 
$

 
$
493,184

Inter-geographic revenues
10,650

 
925

 

 
(11,575
)
 

Net revenues
$
460,868

 
$
35,925

 
$
7,966

 
$
(11,575
)
 
$
493,184

Identifiable long-lived assets (1)
$
47,997

 
$
2,974

 
$
9

 
$

 
$
50,980

YEAR ENDED JUNE 30, 2017
 

 
 

 
 

 
 

 
 

Net revenues to unaffiliated customers
$
380,538

 
$
22,242

 
$
5,808

 
$

 
$
408,588

Inter-geographic revenues
7,637

 
44

 

 
(7,681
)
 

Net revenues
$
388,175

 
$
22,286

 
$
5,808

 
$
(7,681
)
 
$
408,588

Identifiable long-lived assets (1)
$
50,340

 
$
1,288

 
$
15

 
$

 
$
51,643

YEAR ENDED JUNE 30, 2016
 

 
 

 
 

 
 

 
 

Net revenues to unaffiliated customers
$
259,781

 
$
5,464

 
$
4,909

 
$

 
$
270,154

Inter-geographic revenues
7,911

 
447

 

 
(8,358
)
 

Net revenues
$
267,692

 
$
5,911

 
$
4,909

 
$
(8,358
)
 
$
270,154

Identifiable long-lived assets (1)
$
28,187

 
$
127

 
$
23

 
$

 
$
28,337

(1) Identifiable long-lived assets exclude goodwill and intangible assets.

80

Table of Contents

In recent years, the Company completed a series of acquisitions that changed its technological capabilities, applications and end markets. As these acquisitions and changes occurred, the Company increased the proportion of its revenue derived from the sale of components in different technological areas, and also increased the amount of revenue associated with combining technologies into more complex and diverse products including modules, sub-assemblies and integrated subsystems. The following tables present revenue consistent with the Company's strategy of expanding its technological capabilities and program content. As additional information related to the Company’s products by end user, application and/or product grouping is attained, the categorization of these products can vary over time. When this occurs, the Company reclassifies revenue by end user, application and/or product grouping for prior periods. Such reclassifications typically do not materially change the sizing of, or the underlying trends of results within, each revenue category.
The following table presents the Company's net revenue by end market for the periods presented:
 
 
Year Ended June 30,
 
 
2018
 
2017
 
2016
Domestic (1)
 
$
410,050

 
$
341,699

 
$
220,253

International/Foreign Military Sales (2)
 
83,134

 
66,889

 
49,901

Total Net Revenue
 
$
493,184

 
$
408,588

 
$
270,154

(1) Domestic revenues consist of sales where the end user is within the U.S., as well as sales to prime defense contractor customers where the ultimate end user location is not defined. 
(2) International/Foreign Military Sales consist of sales to U.S. prime defense contractor customers where the end user is outside the U.S., foreign military sales through the U.S. government, and direct sales to non-U.S. based customers intended for end use outside of the U.S.
The following table presents the Company's net revenue by end application for the periods presented:
 
 
Year Ended June 30,
 
 
2018
 
2017
 
2016
Radar (1)
 
$
159,737

 
$
150,441

 
$
140,289

Electronic Warfare (2)
 
114,801

 
106,446

 
72,118

Other Sensor and Effector (3)
 
48,088

 
27,719

 
12,494

Total Sensor and Effector
 
322,626

 
284,606

 
224,901

C4I (4)
 
87,414

 
31,679

 
3,472

Other (5)
 
83,144

 
92,303

 
41,781

Total Net Revenue
 
$
493,184

 
$
408,588

 
$
270,154

(1) Radar includes end-use applications where radio frequency signals are utilized to detect, track, and identify objects.
(2) Electronic Warfare includes end-use applications comprising the offensive and defensive use of the electromagnetic spectrum.
(3) Other Sensor and Effector products include all Sensor and Effector end markets other than Radar and Electronic Warfare.
(4) C4I includes rugged secure rackmount servers that are designed to drive the most powerful military processing applications.
(5) Other products include all component and other sales where the end use is not specified.

81

Table of Contents

The following table presents the Company's net revenue by product grouping for the periods presented:
 
 
Year Ended June 30,
 
 
2018
 
2017
 
2016
Components (1)
 
$
142,982

 
$
105,669

 
$
31,252

Modules and Sub-assemblies (2)
 
194,377

 
161,973

 
126,777

Integrated Subsystems (3)
 
155,825

 
140,946

 
112,125

Total Net Revenue
 
$
493,184

 
$
408,588

 
$
270,154

(1) Components include technology elements typically performing a single, discrete technological function, which when physically combined with other components may be used to create a module or sub-assembly. Examples include but are not limited to power amplifiers and limiters, switches, oscillators, filters, equalizers, digital and analog converters, chips, MMICs (monolithic microwave integrated circuits), and memory and storage devices.
(2) Modules and Sub-assemblies include combinations of multiple functional technology elements and/or components that work together to perform multiple functions but are typically resident on or within a single board or housing. Modules and sub-assemblies may in turn be combined to form an integrated subsystem. Examples of modules and sub-assemblies include but are not limited to embedded processing modules, embedded processing boards, switch fabric boards, high speed input/output boards, digital receiver boards, graphics and video processing and Ethernet and IO (input-output) boards, multi-chip modules, integrated radio frequency and microwave multi-function assemblies, tuners, and transceivers.
(3) Integrated Subsystems include multiple modules and/or sub-assemblies combined with a backplane or similar functional element and software to enable a solution. These are typically but not always integrated within a chassis and with cooling, power and other elements to address various requirements and are also often combined with additional technologies for interaction with other parts of a complete system or platform. Integrated subsystems also include spare and replacement modules and sub-assemblies sold as part of the same program for use in or with integrated subsystems sold by the Company.
Customers comprising 10% or more of the Company’s revenues for the periods shown below are as follows:
 
Year Ended June 30,
 
2018
 
2017
 
2016
Lockheed Martin Corporation
19
%
 
20
%
 
23
%
Raytheon Company
19

 
16

 
20

 
38
%
 
36
%
 
43
%
While the Company typically has customers from which it derives 10% or more of its revenue, the sales to each of these customers are spread across multiple programs and platforms. Programs comprising 10% or more of the Company’s revenues for the periods shown below are as follows:
 
Year Ended June 30,
 
2018
 
2017
 
2016
SEWIP
*

 
*

 
12
%
Aegis
*

 
*

 
10
%
 
%
 
%
 
22
%
*Indicates that the amount is less than 10% of the Company's revenues for the respective period. No programs were in excess of 10% of the Company's revenues for fiscal 2018 and 2017.
Q.    Subsequent Events
On July 10, 2018, a securities class action complaint was filed against the Company, Mark Aslett, and Gerald M. Haines II in the U.S. District Court for the District of Massachusetts. The complaint asserts Section 10(b) and 20(a) securities fraud claims on behalf of a purported class of purchasers and sellers of the Company's stock from October 24, 2017 to April 24, 2018.  The complaint alleges that the Company's public disclosures in SEC filings and on earnings calls were false and/or misleading.  The Company believes the claims in the complaint are without merit and the Company intends to defend itself vigorously.
On July 31, 2018, the Company acquired Germane Systems, LC ("Germane"). Based in Chantilly, VA, Germane is an industry leader in the design, development and manufacturing of rugged servers, computers and storage systems for C2I applications. Germane’s quality solutions are used in harsh environments serving critical U.S. and international defense programs. The Company acquired Germane for an all cash purchase price of $45,000, subject to net working capital and net debt adjustments. The acquisition and associated transaction expenses were funded through the Revolver.
The Company has evaluated subsequent events from the date of the consolidated balance sheet through the date the consolidated financial statements were issued.

82

Table of Contents

SUPPLEMENTARY INFORMATION (UNAUDITED)
The following sets forth certain unaudited consolidated quarterly statements of operations data for each of the Company’s last eight quarters. In management’s opinion, this quarterly information reflects all adjustments, consisting only of normal recurring adjustments, necessary for a fair presentation for the periods presented. Such quarterly results are not necessarily indicative of future results of operations and should be read in conjunction with the audited consolidated financial statements of the Company and the notes thereto.
2018 (In thousands, except per share data)
1ST QUARTER
 
2ND QUARTER
 
3RD QUARTER
 
4TH QUARTER
Net revenues
$
106,069

 
$
117,912

 
$
116,336

 
$
152,867

Gross margin
$
50,674

 
$
54,160

 
$
52,766

 
$
68,258

Income from operations
$
10,371

 
$
10,888

 
$
6,838

 
$
18,888

Income before income taxes
$
9,572

 
$
10,468

 
$
5,905

 
$
16,628

Income tax (benefit) provision
$
(8,381
)
 
$
1,335

 
$
2,209

 
$
6,527

Net income
$
17,953

 
$
9,133

 
$
3,696

 
$
10,101

Net income per share:
 
 
 
 
 
 
 
Basic net income per share
$
0.39

 
$
0.20

 
$
0.08

 
$
0.22

Diluted net income per share
$
0.38

 
$
0.19

 
$
0.08

 
$
0.21

2017 (In thousands, except per share data)
1ST QUARTER
 
2ND QUARTER
 
3RD QUARTER
 
4TH QUARTER
Net revenues
$
87,649

 
$
98,014

 
$
107,317

 
$
115,608

Gross margin
$
39,444

 
$
47,389

 
$
50,783

 
$
53,927

Income from operations
$
3,742

 
$
8,958

 
$
11,695

 
$
13,008

Income before income taxes
$
2,560

 
$
6,983

 
$
10,218

 
$
11,307

Income tax (benefit) provision
$
(1,259
)
 
$
1,779

 
$
3,170

 
$
2,503

Net income
$
3,819

 
$
5,204

 
$
7,048

 
$
8,804

Net income per share:
 
 
 
 
 
 
 
Basic net income per share
$
0.10

 
$
0.13

 
$
0.16

 
$
0.19

Diluted net income per share
$
0.10

 
$
0.13

 
$
0.16

 
$
0.19

Due to the effects of rounding, the sum of the four quarters does not equal the annual total.
ITEM 9.
CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
None.
ITEM 9A.
CONTROLS AND PROCEDURES
(a)
EFFECTIVENESS OF DISCLOSURE CONTROLS AND PROCEDURES
We conducted an evaluation as of June 30, 2018 under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer (our principal executive officer and principal financial officer, respectively), and concluded that our disclosure controls and procedures (as defined in Rule 13a-15(e) or Rule 15d-15(e) under the Securities Exchange Act of 1934, as amended, the “Exchange Act”) were effective as of June 30, 2018 and designed to ensure that the information required to be disclosed by us in reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and that it is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, to allow timely decisions regarding required disclosure.
(b)
INHERENT LIMITATIONS ON EFFECTIVENESS OF CONTROLS
Our management, including the Chief Executive Officer and Chief Financial Officer, does not expect that our internal control over financial reporting or our internal controls will prevent or detect all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. The design of any system of controls is based in part on certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions.

83

Table of Contents

(c)
MANAGEMENTS ANNUAL REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING
Our management is responsible for establishing and maintaining adequate internal control over financial reporting. Under the supervision of the Chief Executive Officer and Chief Financial Officer, management conducted an assessment of the effectiveness of our internal control over financial reporting as of June 30, 2018 based on the framework in Internal Control - Integrated Framework (2013) published by the Committee of Sponsoring Organizations of the Treadway Commission.  As a result of this assessment, management concluded that our internal control over financial reporting was effective as of June 30, 2018.  The effectiveness of our internal control over financial reporting as of June 30, 2018 has been audited by KPMG LLP, an independent registered public accounting firm, as stated in its report.
The audited consolidated financial statements of the Company include the results of the acquired RTL and Themis businesses on and after July 3, 2017 and February 1, 2018, respectively, as described in Note C to the Consolidated Financial Statements.  Upon consideration of the date of the fiscal 2018 Themis acquisition and the time constraints under which our management’s assessment would have to be made, management determined that it would not be possible to conduct a sufficiently comprehensive assessment of the Themis internal control over financial reporting environment as allowable under section 404 of the Sarbanes-Oxley Act of 2002. Accordingly, this operation has been excluded from the scope of management’s assessment of internal controls for fiscal year 2018.  However, management is in the process of integrating Themis into the overall internal control over financial reporting environment for fiscal year 2019. Meanwhile, RTL was considered fully integrated during fiscal 2018.  The Company’s consolidated financial statements reflect revenues and total assets from the acquired Themis business of approximately 6 percent and 20 percent (of which 17 percent represented goodwill and intangible assets included within the scope of the Company’s assessment), respectively, as of and for the year ended June 30, 2018.
(d)
CHANGES IN INTERNAL CONTROL OVER FINANCIAL REPORTING
There were no changes in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) during the fourth quarter of fiscal 2018 identified in connection with our Chief Executive Officer’s and Chief Financial Officer’s evaluation that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting. Although management has completed the integration of the CES and Delta businesses, it is in the process of integrating the RTL and Themis businesses into our overall internal control over financial reporting environment.
ITEM 9B.
OTHER INFORMATION
None.
PART III
ITEM 10.
DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
The information required by this item is incorporated herein by reference to our Proxy Statement for our 2018 Annual Meeting of Shareholders (the “Shareholders Meeting”), except that information required by this item concerning our executive officers appears in Part I, Item 4.1. of this Annual Report on Form 10-K.
ITEM 11.
EXECUTIVE COMPENSATION
The information required by this item is incorporated by reference to our Proxy Statement for the Shareholders Meeting.
ITEM 12.
SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
The information required by this item is incorporated herein by reference to our Proxy Statement for the Shareholders Meeting.
ITEM 13.
CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
The information required by this item is incorporated herein by reference to our Proxy Statement for the Shareholders Meeting.
ITEM 14.
PRINCIPAL ACCOUNTANT FEES AND SERVICES
The information required by this item is incorporated herein by reference to our Proxy Statement for the Shareholders Meeting.


84



PART IV
ITEM 15.
EXHIBITS AND FINANCIAL STATEMENT SCHEDULES
(a)FINANCIAL STATEMENTS, SCHEDULES AND EXHIBITS
The financial statements, schedule, and exhibits listed below are included in or incorporated by reference as part of this report:
1.
Financial statements:
Report of Independent Registered Public Accounting Firm
Consolidated Balance Sheets as of June 30, 2018 and 2017
Consolidated Statements of Operations and Comprehensive Income for the fiscal years ended June 30, 2018, 2017, and 2016
Consolidated Statements of Shareholders’ Equity for the fiscal years ended June 30, 2018, 2017, and 2016
Consolidated Statements of Cash Flows for the years ended June 30, 2018, 2017, and 2016
Notes to Consolidated Financial Statements
2.
Financial Statement Schedule:
II.
Valuation and Qualifying Accounts

85


Table of Contents

MERCURY SYSTEMS, INC.
SCHEDULE II—VALUATION AND QUALIFYING ACCOUNTS
FOR FISCAL YEARS ENDED JUNE 30, 2018, 2017 AND 2016
(In thousands)
Allowance for Doubtful Accounts 
 
BALANCE
AT
BEGINNING
OF PERIOD
 
ADDITIONS
 
REVERSALS
 
WRITE-
OFFS
 
BALANCE
AT END OF
PERIOD
2018
$
83

 
$
359

 
$
31

 
$
52

 
$
359

2017
$
92

 
$
22

 
$

 
$
31

 
$
83

2016
$
56

 
$
425

 
$

 
$
389

 
$
92

Deferred Tax Asset Valuation Allowance 
 
BALANCE
AT
BEGINNING
OF PERIOD
 
CHARGED
TO COSTS &
EXPENSES
 
CHARGED
TO OTHER
ACCOUNTS
 
DEDUCTIONS
 
BALANCE
AT END OF
PERIOD
2018
$
16,570

 
$
422

 
$

 
$

 
$
16,992

2017
$
18,472

 
$
(1,902
)
 
$

 
$

 
$
16,570

2016
$
18,864

 
$
(392
)
 
$

 
$

 
$
18,472

 
3.Exhibits:
Exhibits required by Item 601 of Regulation S-K are listed in the Exhibit Index on page 88, which is incorporated herein by reference.


86

Table of Contents

Signatures
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized, in Andover, Massachusetts, on August 16, 2018.
 
 
 
 
 
MERCURY SYSTEMS, INC.
 
 
 
 
By
/s/    MICHAEL D. RUPPERT         
 
 
Michael D. Ruppert
EXECUTIVE VICE PRESIDENT, CHIEF FINANCIAL OFFICER, AND TREASURER
[PRINCIPAL FINANCIAL OFFICER]
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.
Signature
  
Title(s)
    
Date
/s/    MARK ASLETT 
  
President, Chief Executive Officer and Director (principal executive officer)
    
August 16, 2018
Mark Aslett
 
 
 
 
/S/    MICHAEL D. RUPPERT
  
Executive Vice President, Chief Financial Officer, and Treasurer (principal financial officer)
    
August 16, 2018
Michael D. Ruppert
 
 
 
 
/S/    MICHELLE M. MCCARTHY
  
Vice President, Controller, and Chief Accounting Officer (principal accounting officer)
    
August 16, 2018
Michelle M. McCarthy
 
 
 
 
/S/    VINCENT VITTO
  
Chairman of the Board of Directors
    
August 16, 2018
Vincent Vitto
 
 
 
 
/S/    JAMES K. BASS
  
Director
    
August 16, 2018
James K. Bass
 
 
 
 
/S/    MICHAEL A. DANIELS
  
Director
    
August 16, 2018
Michael A. Daniels
 
 
 
 
/S/    LISA S. DISBROW
  
Director
    
August 16, 2018
Lisa S. Disbrow
 
 
 
 
/S/    MARY LOUISE KRAKAUER
  
Director
    
August 16, 2018
Mary Louise Krakauer
 
 
 
 
/S/    GEORGE K. MUELLNER
  
Director
    
August 16, 2018
George K. Muellner
 
 
 
 
/S/    MARK S. NEWMAN
  
Director
    
August 16, 2018
Mark S. Newman
 
 
 
 
/S/    WILLIAM K. O’BRIEN 
  
Director
    
August 16, 2018
William K. O’Brien
 
 
 
 

87

Table of Contents

EXHIBIT INDEX
 
ITEM NO.
  
DESCRIPTION OF EXHIBIT
  
 
  
  
  
 
 
  
  
  
  
  
  
  
 
 
 
 
  
 
  



88

Table of Contents

ITEM NO.
  
DESCRIPTION OF EXHIBIT
  
  
 
  
  
  
  
  
 
 
  
  
  
 
  
  
 
 
 
 

89

Table of Contents

ITEM NO.
  
DESCRIPTION OF EXHIBIT
101†
  
Interactive data files pursuant to Rule 405 of Regulation S-T: (i) Consolidated Statement of Operations, (ii) Consolidated Balance Sheet, (iii) Consolidated Statement of Shareholders’ Equity, (iv) Consolidated Statement of Cash Flows, and (v) Notes to Consolidated financial Statements

*
Identifies a management contract or compensatory plan or arrangement in which an executive officer or director of the Company participates.
Filed with this Form 10-K.
+
Furnished herewith. This certification shall not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, or otherwise subject to the liability of that section, nor shall it be incorporated by reference into any filing under the Securities Act of 1933 or the Securities Exchange Act of 1934.


90