Outwater Plastics will introduce many new woodworking products at the 2014 International Woodworking Fair to address and respond to the necessity for woodworkers to improve their operating efficiency and increase their revenue in a progressively more competitive marketplace.
Bogota, NJ (PRWEB) August 19, 2014
With this year’s International Woodworking Fair set to take place from August 20th until August 23rd at the Georgia World Congress Center in Atlanta, GA, Outwater [Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC] will introduce many new woodworking products at the show to address and respond to the necessity for woodworkers to improve their operating efficiency and increase their revenue in a progressively more competitive marketplace.
The International Woodworking Fair, also known as IWF, is long established as the largest woodworking trade show in North America, and is geared towards assisting woodworkers, furniture and cabinet manufacturers and other industry related professionals in sourcing innovative and traditional woodworking products of all genres.
Outwater has chosen to highlight a few innovative products that are likely to garner significant attention and positive feedback at the show.
1) RF Dimmers
Now you’re in control! Unlike IR Dimmers, which require that they be utilized in close proximity with a direct line-of-sight to their paired, unobstructed IR Receivers, the radio frequencies of Outwater’s new RF Dimmers are omnidirectional and can travel over an extended range and effortlessly pass through walls or other barriers, permitting Outwater’s RF Receivers to be placed anywhere desired, such as in cabinets, bookcases, closets or other inconspicuous locations.
Available in three different formats to suit specific applications, Outwater’s RF Dimmers and Receivers are extremely cost effective and are manufactured using the highest quality components to ensure years of trouble free operation.
Afforded with a dimmer control knob (Varies by model), which smoothly rotates in discreet incremental steps, 12V and 24V lighting can be readily and precisely regulated as desired with an effective range from 10% to 100% of illumination, and can be simply turned on or off with a light tap on the RF Dimmer’s control knob.
Just introduced as the first and only 120V RGB LED Ribbon Flex Lighting on the market, Outwater’s new 120V RGB LED Brite Lite Flex offers a kaleidoscope of colors that can be programmed to morph at variable speeds or to remain static on any color via its corresponding, 9 function RGB controller.
With no fixtures to hide, the highly flexible, diminutive physical contour of Outwater’s 120V RGB LED Brite Lite Flex can be easily cut every 19-in.and connected end-to-end via solder free, plug in connectors, and can be mounted in all of those “hard to light” areas, or virtually anyplace that could not be previously lit.
Additionally, low heat emissions and no generated UV radiation render Outwater’s 120V RGB LED Brite Lite Flex, with its IP67 rated waterproof cover (Totally protected against dust ingress and the effects of immersion in water between 15 cm and 1 meter) safe for indoor and outdoor use in a variety of commercial and residential applications in which the 120V RGB LED Brite Lite Flex might potentially be exposed to water or damp environments.
Noted for its tremendous versatility, Outwater’s 120V RGB LED Brite Lite Flex maintains consistent binning codes and color temperatures, consuming only a few watts per linear foot and has an approximate 35,000 hour bulb life.
Offered in 16-1/2-ft., 33-ft. and 164-ft. lengths, Outwater’s 120V RGB LED Brite Lite Flex is ideal for use in tasks in which longer runs of lighting are desired, with a continuous length up to 80-ft. that can be powered via the multifunction RGB controller.
Complementary connectors, end caps and mounting clips along with a selection of LED Ribbon Mounting Channels readily enable a host of custom configurations and applications.
3) Plastic Channels for Economy & Standard 120V LED Brite Lite Flex
Intended for use with Outwater’s Economy and Standard 120V LED Brite Lite Flex, Outwater’s new 383-CL (Clear), 121-CL (Clear) and 121-SIL (Silver) PVC Plastic Channels readily enable cabinet and furniture manufacturers, lighting designers, contractors and electricians to inexpensively fabricate custom, aesthetically pleasing light fixtures without any prior experience either in the shop or right on the jobsite.
Sold in 12-ft. easy to cut lengths, Outwater’s Plastic Channels provide protective rigidity, affording 120V LED Brite Lite Flex with vital fortification to accommodate specific functions.
Ideal for budget oriented applications, Outwater’s new 12V Standard Ribbon Flex Light may be low in cost, but offers all of the sought after features found on more expensive flexible ribbon lighting including consistent binning codes and color temperatures, in the field “cuttability,” end-to-end solder free “connectability,” approximately 50,000 hours of bulb life along with low heat emissions and no generated UV radiation, rendering safe indoor and outdoor commercial and residential use in damp environments, which is further bolstered by an IP65 rated waterproof cover (Totally protected against dust ingress with limited permitted low pressure water jets from any direction).
Available in both 8-1/4-ft. and 16-1/2-ft. coiled lengths with several LED Chip configurations offered in cool white and warm white, Outwater’s 12V Standard Ribbon Flex Light is constructed with two DC 5.5 female ends, enabling it to be cut to size every 1-in. or 1-7/8-in. (Varies by model) while allowing for any remaining portion of unused lighting to be employed for another project.
5) Economy T5 LED Lighting
Now, for the first time, one can finally purchase a high quality T5 LED light fixture for less than the cost of T5 fluorescent lighting!
Comparable in size and appearance to a T5 fluorescent light with the functionality of a fixture, Outwater’s new, fully dimmable Economy T5 LED Lighting is priced as low as $9.00 for a 3-ft. and $12.00 for a 4-ft. light fixture, and is one of the most energy efficient and cost effective LED lights on the market.
Very slim and easy to hide, Outwater’s Economy T5 LED Lighting comprises a sturdy housing with a frosted lens that can be readily mounted to wood, metal or glass for use in various applications, such as in showcases, under cabinets, store fixtures and wall units.
Available in cool white and warm white, Outwater’s Economy T5 LED Lighting is offered in different sizes and comes complete with desirable accessories to expedite its “out of the box” installation and enhance its usage.
Featuring consistent binning codes and color temperatures along with a significant bulb life ensures exceptional, long lasting operation without compromise.
Create with Task-8! Intended for use with Outwater’s newly introduced 120V LED Brite Lite Flex Double D-Lite, Outwater’s new L- Task-8F LED Aluminum Channel comes complete with everything needed to easily create and mount a custom lighting fixture using Outwater's 120V LED Brite Lite Flex Double D-Lite, and comprises precisely engineered surface angles and a snap on, impact resistant, frosted polycarbonate diffuser lens to ensure even illumination without any scalloping or hot spots.
Offered in an easy-to-cut 8-ft. length, Outwater’s L- Task-8F LED Aluminum Channel not only provides tremendous design opportunities for a breadth of made to order applications, it is also great for dissipating longevity robbing heat from LEDs by also functioning as a heat sink, thus prolonging the life and lumen output of Outwater's 120V LED Brite Lite Flex Double D-Lite’s LEDs many times over.
Just introduced as the counterpart to the only other 120V flexible ribbon light on the market, Outwater’s new, dimmable 120V LED Brite Lite Flex Double D-Lite employs a double row of 5060 chips that provide approximately 40,000 hours of use with consistent binning codes and color temperatures, and generate super bright light with an extraordinarily high output of up to 800 lumens per foot.
Because no transformers are required to power Outwater’s 120 V LED Brite Lite Flex Double D-Lite, an unprecedented, continuous length up to 82-½ ft., which can be cut every 19-in. and connected end-to-end in the field via solder free, plug in connectors, can be run via an available single attached AC power cord.
Outwater’s 120 V LED Brite Lite Flex Double D-Lite is IP67 rated (Totally protected against dust ingress and the effects of immersion in water between 15 cm and 1 meter), produces low heat emissions and no generated UV radiation, and is intended for commercial and residential use in damp environments with Outwater’s new L- Task-8F LED Aluminum Channel.
Optimal operating efficiency without any interruption to slow one down is absolutely crucial in today’s workplace. However, overlooked peripherals are often accountable for reduced productivity.
UL Listed for safe use in commercial or residential environments, Outwater’s new PDC-96 120V Power Distribution Center comprises an indispensable connection interface via an incorporated pass through USB port for data transmission along with two self-powered USB ports and an AC outlet to charge and supply uninterrupted current to one’s computer and other standalone, power hungry electronic devices.
Manufactured with industrial grade components contained within the unit’s compact, black ABS plastic housing, Outwater’s PDC-96 120V Power Distribution Center includes an attached heavy duty SJT 4 AWG 3C power cord and easily installs via integrated spring clips.
Outwater provides the perfect solution to messy wire and cable clutter with the introduction of its LED Slide-N-Hide Extrusion, a new, low profile, adhesive backed electrical cable and wire cover designed to unify, protect and conceal low-voltage cables and wires up to 22-gauge, such as those used to power LED Ribbon Lighting.
Easy to adhere to furniture, walls, baseboards and ceilings without drilling, nailing or stapling, Outwater’s polycarbonate LED Slide-N-Hide Extrusion is offered in white 18-in. lengths which can be cut and measures a scant 7/8-in. wide x ¼-in. high.
Outwater’s new line of Barn Door Hardware discriminatingly fuses superior construction and exceptional functionality with a refined aesthetic appeal that will elegantly blend into any traditional or contemporary setting in which it is utilized.
Offered as individual components in matte black, oil rubbed bronze and satin nickel powder coated finishes, Outwater’s Barn Door Hardware comprises solid, hardened aluminum rails and rail brackets along with steel roller straps, fasteners, center guides, door stops and rail splicers, which not only convey a true sense of substantial quality and heft unmatched by lesser, mass produced counterparts, Outwater’s Barn Door Hardware can support large doors weighing hundreds of pounds, and is certain to further one’s appreciation of the workmanship and materials used in its construction.
Outwater’s new Woven Wire Grille Sample Kit [Model #WWG-Kit] features its entire collection of Woven Wire Grilles, with more than 45 different patterns from which to choose in numerous designs, finishes and sizes, and is an invaluable, portable resource for furniture and cabinet manufacturers to readily showcase Outwater’s Woven Wire Grilles to their prospective customers.
Now offered at the reduced price of only $55.00, Outwater’s Woven Wire Grille Sample Kit is valued at $250.00, and is designed to benefit both furniture and cabinet manufacturers and their customers by providing potential customers with everything needed to facilitate purchasing decisions.
Hand reproduced from original designs ranging from the English Country to the French Provincial Periods, Outwater’s Woven Wire Grilles provide the perfect decorative enhancement for furniture and cabinets from any era and are also available in custom sizes and finishes.
About Outwater [Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC]:
Outwater can be contacted Toll Free at 1-800-631-8375 (for sales and product information in the USA & Canada) / 1-201-498-8750 (for sales and product information outside of the USA & Canada) or viewed online at http://www.outwater.com
Outwater was founded as a brick and mortar company in August 1972 on the premise to provide small and midsized furniture and cabinet manufacturers with a reliable source from whom they could purchase plastic extrusions in the amounts that reflected their actual requirements rather than the often substantial minimum quantities that were dictated by numerous manufacturers.
From the vendor of a single product line, Outwater, with sales and distribution facilities in New Jersey and Arizona, is established as an international manufacturer and distributor of more than 65,000 traditional and innovative products required by woodworkers, cabinet and furniture manufacturers, builders, remodelers, designers, architects, point-of-purchase and display fixturing manufacturers, OEM's, as well as a diversified range of other commercial and retail customers.
Major Product Categories include Plastic & Aluminum Extrusions; Lighting and Lighting Accessories; Furniture, Cabinet & Store Fixture Components; Knobs & Pulls; Casters; Fasteners; Laminates; The Foga Exhibit & Display Fastening System; The Klem Connector; Literature Displays; Slatwall; Sign Holders; P.O.P Components; Display Motors & Turntables; Pedestals; Injection Molded Parts; Brass Tubing & Fittings; Surfacing Materials; Interior & Exterior Polymer & Wood Architectural Mouldings & Millwork; Orac Decor and DEM Architectural Mouldings & Millwork; Columns & Capitals; Balustrading; Wrought Iron Components; Decorative Stamped Steel & Polymer Ceiling Panels; Wainscoting; Wall Coverings; Fireplace Surrounds; Plastic "Glass" Block; Period & Contemporary Hardware; Kitchen & Bath Accessories; Kitchen & Bath Cabinetry and Vanities… and so much more!
Joey Shimm, Director of Marketing
Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC
For the original version on PRWeb visit: http://www.prweb.com/releases/2014/08/prweb12107018.htm