Some projects appear doable until you are in the middle of scrubbing. More often than not, the dirt will have been compacted, baked on, or ground in; that effort alone will not do much on the stain. This article details such tasks to save you the time you could otherwise lose working on them and the associated frustrations.
1. Driveways and Concrete Surfaces
Concrete driveways can conceal elements such as oil stains, tyre marks, and grime beneath the layer. It will not be sufficient to power wash them. A significant number of them have feathers, and they are the ones that rub the sand together.
Pressure is frequently the only method that can be used to extract them. In addition to breaking the surface and filtering it, this process prevents the surface from regaining its colour or texture, is loaded with chemicals, and frequently leaves a stain.
2. Outdoor Paving and Stone Areas
Even after being swept or hosted, the ones that are located around a deck or pool do not appear to be completely cleaned. This is due to the fact that although the top layer may appear to be free of debris, soil is still trapped, and the area appears to be devoid of life.
Using a high pressure cleaner directs water into those gaps. Through the use of this method, debris that is susceptible to overgrown moss, algae, and compacted dirt can be effectively removed. Otherwise, if there is no pressure applied, these fissures will return to their dirty state.
3. Decking and Timber Surfaces
As a result of the decking itself being exposed to the elements, mould, mildew, and residues that have accumulated can develop. There are times when areas that have been cleaned with a gentle touch leave behind slick patches. Scrubbing the surfaces, on the other hand, might be too painful for the fibres of the wood.
By applying pressure, it is possible to wash in a uniform manner without causing the dirt to become compacted into the surface. On account of the fact that it can be scraped off without anyone noticing, it is recommended that the method be used relatively frequently.
4. Fences and Exterior Walls
Outside walls and fences naturally get a layer of dirt, pollution, and plant life. It takes a lot of time and effort to wash large vertical surfaces by hand.
It also can’t promise that the cleaning solution will be applied evenly. Pressure cleaning is a better and faster way to clean. It makes it easier to get to high or awkward places.
5. Vehicles, Trailers, and Outdoor Equipment
Water from a hose can rinse off the loose dirt, but you need elbow grease to get rid of greasy grime or dirt and grit that is stuck on. The fact is, scrubbing alone won’t clean many things.
Driving the water under high pressure helps to raise most things sooner and faster, greatly reducing the time it lies on the surface. The undercarriage and other hard-to-reach corners can also be washed.
6. Gutters and Hard-to-Reach Areas
Leaves, sludge, and packed-down dirt build up in gutters and on raised surfaces. It takes a long time and is not safe to clear them by hand. Most of the time, the pressure from a water hose is not enough to clear these out. The force makes it easier for the debris to move. This means you don’t have to walk up and down or pick up deposits more than once.
Clean Smarter, Not Harder
Understanding which instances benefit from pressure allows you to truly approach cleaning with the right mindset. Certain jobs require more than just applying the right tools. When pressure is applied in the correct manner, outcomes are better, time is saved, and cleaning is far more exciting.
